Adjusting Juki LU-563 class machines
Вставка
- Опубліковано 20 сер 2024
- This video is about Adjusting Juki LU-563 class machines.
You can download the PDF template to make your own Stitch Length Gauges here: docs.uwe.net/SL...
Check out my online store for other sewing related items:
uwe.store
Table of Contents:
1. Change Stitch Length . . . . . . . . . . . . . . . . . . . . . . . 0:40
2. Set stitch length Indicator . . . . . . . . . . . . . . . . . . . 1:34
3. Adjust foot lift height, balance, and timing . . . . . 3:12
4. Adjust rocker bar position . . . . . . . . . . . . . . . . . . . . 4:57
5. Center needle positon in feed dog hole . . . . . . . . . 6:53
6. Adjust Feed dog height . . . . . . . . . . . . . . . . . . . . . . . 8:04
7. Adjust for maximum possible stitch length . . . . 8:45
8. Adjust for equal Forward/reverse stitch length . . 9:37
NOT Covered: Hook timing
(see my video titled "Consew 225 Hook Timing" )
Dieses Video ist eine Justier-Anleitung für Nähmaschinen der Klasse Juki LU-563
Die Stichlängen-Messschablone kann man auch selber machen. Hier ist die PDF datei dazu:docs.uwe.net/SL...
Inhaltsverzeichnis
1. Stichlänge wählen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0:40
2. Stichlängen-Anzeigescheibe ausrichten . . . . . . . . . 1:34
3. Höhe, Zeitpunkt, Ausgleich von Fusshub . . . . . . . . . 3:12
4. Nadelschwinge ausrichten . . . . . . . . . . . . . . . . . . . . . . 4:57
5. Nadel im Transporteurloch zentrieren . . . . . . . . . . . 6:53
6. Transporteurhöhe einstellen . . . . . . . . . . . . . . . . . . . 8:04
7. Stichlänge maximal einstellen . . . . . . . . . . . . . . . . . 8:45
8. Stichlänge Vorwärts/Rückwärts ausgleichen . . . . . 9:37
Greiferjustierung wird in diesem Video nicht gezeigt
(Das zeigt mein video "Consew 225 Hook Timing" )
Eight years after this video was made, I am so grateful it is still here. Thanks Uwe, wherever you are, much appreciated.
This tutorial is SOOOO well illustrated. UA-cam should make your video part of a required lesson for anyone else wanting to put up a "how to" video. Well done.
Everything that needed to be shown and nothing that didn't. A masterpiece of artistic minimalism.
I just bought a Juki LU-563. Your video was super helpful. I had very mismatched forward and reverse stitch lengths, but I have the machine with the lock pin underneath. It turns out you can adjust the handle position relative to the rod and adjust your forward / reverse ratio that way. My handle was way off center. Then I used the spacer screw on the "redundant" part you removed to fine tune the forward / back. Works like a champ now. Thanks again.
This is a master class in how to produce a technical video. I'm a huge fan.
I don't think this tutorial could have been any better. Thank you so much for posting it. I have six Juki 562s and I need to adjust all of them for resale. This video is going to come in very handy.
your video was excellent, being able to see a machine works is priceless, Once I understood how the different parts worked with each other it was a whole bunch easier to repair. if I can understand how it works and the setting I can usually fix it. You hit all the high points to set the machine. .It is rare to find somebody who has been there and done that. Is willing to share his experience. Excellent is an understatement. But thanks for your time. Thank you personally Allen
UWE, your sharing this developed (experience) and knowledge in a dimminishing service world for things "mechanical" is so VERY appreciated....In a matter of minutes I straighten-ed out my 563, now sewing beutifull as it should. YOU are a mechanical genious, and not too bad at putting it into video...(chuckle)...smiling
This is by far the best tutorial on the Juki 562/563 on the web. Thank you very much.
Thank you for making this Uwe. I will be purchasing a used techsew 563 soon and this video gave me confidence that i can keep this machine running properly for a long time to come.
Thank You, adjusted a JUKI LH-515 now works smoothly and beautifully !!!
Your videos are the best, ever, hands down. I was able to make my feet adjust equally, but I'm not too confident to set the maximum foot lift on my singer 111w .... I am not read to play with those internal screws on the singer that my manual says I need to adjust without seeing someone else do it... so for now I'll be happy with the foot lift I currently have now that it's equal!
Incredibly well done!! Thank you so much! Exactly what I needed in setting up my Juki
Thank you!! I have a Consew 226 that I rescued from a rusty death that I am in the process of refurbishing. It sews backwards until you press the reverse lever. I am going to set all the timing and see if i can get it to correct. This video has been so helpful.
hi sir, this is muthukumar from India, very useful video sir,thank you very much sir..
I really like the lighting. It makes it very easy to see. Thanks
I just bought this machine and ur videos answers everything I needed to know thanks a lot
The best instructional I have seen yet Thanks for taking the time to record it
YAY!!! You helped me fix my machine!!! Thank you so much!! 👍🏼🫶🏻🙏🏼
Very cool video! Thanks to you my Juki is running like new again!!
Simple & educative video! The background music makes the process of understanding comfortable. Thanks for sharing & .PDF stitch length gauge! Finally I find iiit 10:40 : lol .
Pfaff 145 is not a problem now. Many thanks
Great video this will help me fix the un even stitch length on my Consew
wonderfully detailed and thorough! thank you for making this and sharing!
Your video is a thing of beauty! Thank you!!
Excellent video .i have 3 juki lu563's and 1 Nakajima ( lu563 knockoff)
Fantastic... I learned a lot about my Juki.!
Excellent tutorial. Thank you very much.
this is great demonstration and video like university , nice work and thanks a lot , keep working
Awesome video. I have watched it several times and now my juki 562 is stitching almost perfectly. My problem is on canvas im getting 4.5 stitches per inch but when i go to vinyl it jumps up to 7 or 8 stitches per inch. When i switch feet i am getting about 8 stitches per inch on canvas. Does anyone clue me in on whats happening? Thank you in advance
Thank you for providing this video! Blessings
Excellent information. Thank you so much!
Do you have any videos on the oiling process for these machines? I watched this video and I'm going to try to adjust my stitch length. Just got this machine, it sews but I believe it needs some adjusting. I've oiled it on all the red markings, but didn't quite understand about the oiling underneath. Said something about oil pan.... I'm hoping you have another great video on oiling that will make it all look simple, like this one does! Your great! Thanks!
Hi. Thanks for the video. I have a question. After setting my machine up as per the video, i could get a decent stitch length. About 5 stitch max. Then after usung it some, the stitch length dropped down to about half. I turned the stitch length back to zero, but i noticed that there was now horizontal motion in the feet. What should i check to fix this problem? Please help!!!!
That’s an awesome video.
Thank you for sharing.
Hello, Great video, thank you, will be very helpful as I have just purchased an old 563 that seems to in ok working order but is very dirty, a lot of lint stuck on the insides from the oil , I was wondering if you would be so kind as to give some advise on cleaning it out? Is it ok to use degreasers in the machine? I want to give it a full clean and service before I use it!
Thanks from Australia
Excelente!! Más o menos le entendí.. Si lo tradujeran sería mucho mejor!!
con esta video e puesto a punto de mi maquina gracias a -UWE GROSSE
Great video. I have a Juki LUH 561 that I’m trying to set it to 0. How can you tell when the lever motion is center to 0? That’s the part Is not clear to me. Thanks for your help!
Les prises de vue sont excellentes et illustrent parfaitement les procédures. Un modèle du genre. Pourrai-t-on faire mieux ???
How can you adjust the mechanism to release the thread tensioner when you lift the foot. In my machine, when you lift the foot the tensioner does not release the tension. I checked and the rod that pushes the tensioner does not protrude far enough.
Thanks, Joe
One my Juki LU-563 in order to match forward and reverse stitch you have to drive out a small pin that is next to the screw you loosen. LOOKS like the factory tried to make that setting semi permanent. Thanks for tge videa. You should set up a Patreon account.
Hey I have that little pin on my 562 also. I cant get the stitches to adjust at all. My reverse stitches are way way shorter than my foreward. Do I drive the pin out to move the arm??
I have a Juki 563. It’s not quite the same for adjusting the forward to reverse stitch length. I tried adjusting it and now it only runs in reverse. Must be some fine adjustment off now.
Very well done, big help !
Hi Uwe, thank you for your videos. I've referenced them many times! Do you have any guidance on adjustments or tips on how to make backstitches as clean as possible? Even when tension is perfect and the forward/reverse stitch length is equal, the backstitches at the beginning and end of a stitch pattern (on a wallet for example) are never quite as attractive as the other stitches. Machines used are Juki LU-563 and Juki LU-1508N Thank you!
You are great, man! I am a sewing machine lover too. My hobby is to close to ''perfect timing'' on my machines. Can you make a video for a 3 step zig-zag machine (with walking foot if it is possible) timings?
Thanks for the kind words! I've not yet worked on a walking foot zig-zag machine, so I can't really help there, sorry!
ok. i will try to figure something out. the part on my machine that should have a turn dial for adjusting the presser foot tension...only has a screw down in the hole...guess it broke and someone put a screw in instead...hope I figure this out!
Excelente
If I adjust the rocker bar to a value more than 8.54 will I get longer stitches? I have a Singer 211g266 which works fine but the max stitchlength is not 7mm like the manual says but more like 4.5 or 5mm. Think I have done every adjustment in the book by now or am I just grasping at straws?
great video thank you seeeew much...yes thats a play on words. great video.
Thank you so much for this, my machine is running better than ever now.
Any chance you have worked on a pfaff 345? There are just no videos (and no repairpeople) around. I am having a little trouble with the thread getting caught up and maybe my timing is off...
Thanks again and your videos are perfectly set up and easy to learn from:)
No matter how many times I watch this video, I cannot make out what he does at around 4.30 at the back of the machine with his right hand, and near the foot with his left. Can anyone explain this to me?
Another excellent tutorial, thanks :)
Very interesting. Thank you.
Hi, Why does my sewing machine come back when I stop sewing? The motors no longer have a brake but this causes the thread on the hook to tie into a knot...
JUKI 563
I see it now. I should have watched the whole video before asking a question.
Buenas tardes como se cambia la banda de tiempo de makina triple arrastre ?
Hi Uwe / good video! I just inherited a Consew 226 and it is totally out of adjustment (I think) stitch length wheel is locked!
I don't want to force it and break something... I'm trying to figure where to start, I've been watching your videos a few years now.
I have a LU-563 that works ok now, thanks for your videos, great help!
I'm working on a video for the Singer 111W155 style stitch length adjustment assembly (also called feed eccentric). I hope to wrap it up within a week.
Thanks, I'll be looking forward to watching it. JG
this is great help me alot thanks
Great!!! Thank you.
UWE......Quick.....need help! was following your process everything was going perfect until I was adjusting reverse stitch length. Now I have no forward walk. what did I screw up. Stitch length at 8/in? Reverse works perfect.
I am in the process of setting up an Brother LS2-837-310. I am at almost 10mm of forward stitch and 5-6mm in
reverse on a machine spec'd to 8mm. Everything that you might think to
adjust seemed locked in place with setscrews and location indents. I
even removed the backtack solenoid in case it was binding things up. Have you adjusted a machine like this?
Thanks you so much nice
hello sir ,can u guide me on how to repair thread nest from the bottom in spite of the upper tread tension is fully closed
Does anyone know if all settings in this video apply to Seiko SL-19? It looks like the SL-19 is based on Singer 211 which is very similar to a Singer 111 internally. And I guess the Juki 563 is based on the Singer 111. Any input is much appreciated.
I am specifically curious to know if the 8.54mm distance between bars is applicable. The distance does not match on my machine, and I would like to know if it should. Any input is appreciated.
Uwe…my stitch length adjustment is unable to be completed due to the housing being pinned with a roll pin to the shaft. Is there a different way to adjust or would you remove the roll pin?
Thank you so much for this great 👍 video
I have a Juki LU-563, how do I get just the presser foot to drop down to the fabric, sometimes it won't press down hard enough to move two layers of fabric? I watched your video and it looks like you move two different bolts or is it just one and you are pressing down on the arm that I can't see? Thanks
Hello, Uwe.
Very useful video indeed.
I've made some adjustments like you taught, exept forward and reverse stitch length.
My machine is very similar but slightly different. I own Durkopp 239-525.
There is no full and clear video about Durkopp kind machines.
Can you help me out?
Thanks.
Please mister Uwe juki lg 158 adjusting hook
Great video, thanks!
Hi Uwe, How do you know when the machine is set to "0" ? I am adjusting my LU563 but the wheel get very tight and I'm not sure if it is at zero. thanks John G.Your video is very good! since I don't have access to service in my area, I depend on youtube. / thanks again.
You can verify the stitch is at or close to zero if the needle and feed dog stay centered front-to-back when you depress the reverse lever or turn the handwheel. Sometimes the parts inside the feed excenter stick together from old oil residue. Oil the excenter (and everything else) and try to move stitch length to both extremes a couple of times. There should be a hard stop at both ends and relatively smooth movement in the middle. There are some adjustment screws on the excenter itself, but they rarely need to be adjusted.
What advantage does reducing the foot lift height have? I usually leave mine set to maximum.
Lower foot lift reduces dynamic stress, vibrations, and noise when you sew very fast. It has no real advantage when you sew at slow speeds for leather or upholstery work.
@@UweXY Thanks Uwe. In that case I should probably reduce the lift height to the minimum I can get away with. I primarily sew leather at the machine's max speed.
I bought an Adler door cup 239-125. It has different lengths of stitches, forward and backward. Do you know how to adjust this. you may have a manual of adjustments to this machine. Best regards Sven-Åke Hellström Sweden
Hi - Fascinating insight into how to adjust these machines. Do you know if the measurements quoted and adjustment techniques are the same for the Singer 111W machines
Great job!
Good eavning Siŕ. I have a problem that I can't seem to figure out. It skips multiple stiches at random. It will sew fine for a decent length then not stitch at all, anywhere from 1-15 stiches. Any help would be greatly appreciated. Thank you.
Thomas Austin
Machines skip stitches when the hook fails to grab the upper thread.
Of course, it can be a timing error, or the needle being thrown off by a collision you didn't even notice.
Keep in mind, these parts whirl at speeds rivaling a race car engine.
If a commercial machine isn't grounded, just static electricity from fabric will create a powerful magnetic field.
The needle needs to come very close; close enough that the magnetic field pulls the needle into the hook.
Inspect your used needles and the hook point.
If you find burrs, those must be gently removed or the thread will fray on them.
Ajuste de puntadavde consew 226
Ajuste de puntadavde
buenas amigo una consulta yo tengo una maquina de coser juki lu 563 y my consulta es las piesa de la parte de arriba donde va la aguja y todo el sistema donde alsa la pata para andar son las misma q las de la singer 111w115 es q quiero cambiar esas piesas de mi maquina de la juki lu 563 y solo encontre de la singer 111w115 y no asi de la juki lu 563 por favor saqueme de esa duda es q la quiero pedir por ebay pero por ahi no le hace. le agradeceria su repuesta le escribo desde santa cruz de la sierra bolivia un saludo y gracias a su video e podido regular mi maquina de coser mi oficio es la tapiceria por eso me interesa q la maquina trabaje bien
Hi, when i run my juki lu563 at high speed it makes small stitchs but when i use it slow speed with same settings the stich length remains ok. What could be the cause of it.
good video, thanks.
thnx sir for this video
also, my inner presser foot slides slightly to the right when it makes contact to the fabric/feed dogs. although its tightenes all the way, there is play...i can twist it left and right...
That is not a good sign. Something may be loose or broken in the head. My video on how to replace a thread tension release guide (ua-cam.com/video/4aSNYzUTnW4/v-deo.html) shows how things inside the head come apart. There's a vertical guide channel that keeps the inner foot shaft from rotating as it moves up and down - it may be missing or broken or loose. I don't recommend taking things apart unless you're really comfortable with the procedure, and know how to put things back together. The same video also shows the main tension screw and how to loosen it all the way to remove the pressure spring. Some machines have the thumb wheel on top, some machines have a set screw type that you need a screwdriver to adjust.
+Uwe Grosse
can you give me an email to send a short video of the slight movement of the foot? my husband is a mechanic..hes not home..but Im decent with taking things apart.
We're on youtube, the best place to share videos! Emailing video is troublesome. Just upload it here (as a non-public video if you prefer) and then send me a direct message. Include a view of the inside of the head as you wiggle the inner foot.
+Uwe Grosse
disregard the video with the thread....ummm I didnt have the needle threaded....lol! sorry for the waste of time! my indicator wheel is still off though. i will have my husband fix it when he gets home hoepfully.
Hello do you have video on adjusting motor and belt on a Comsew 75t blindhem machine ?
thank you so much for this video i love my Juki and this video will help me keep it running correctly. Can i get a copy of this video?
You can order a DVD with one of my UA-cam videos by visiting shop.uwe.net (U.S. orders only)
Do you have an engine supply for me to buy and send to Indonesia?
Hi, Great video! I'm glad I happened across this video. I just bought {I'm told] an ugly Consew 226. A sewing machine company identified it. I can't locate the view wind you mentioned at 1:33. Can you tell me where to find it, if Consew 226 has one?
Thanks, Brad
Hi any suggestions on a consew 226R-2
My reverse stich is giving me a hard time
Uwe, would this work for regulating the forward and reverse stitch length on a Consew 226R? Looks similar, but some differences. Thanks
Are these adjustments the same on a consew 226 ??
que pena não ter legendas em portugues tenho uma igual gosto muito (sou estofador)
Eu não falo português, desculpe. Eu uso o Google translate (translate.google.com) Eu tenho que ler ou escrever algo em um idioma que eu não falo. Pode ser útil para você.
Please Mr uwe hook timing juki lg 158
Awesome tutorial.
Can you please help with one more thing.
Juju 563. Sewing backwards. When I hold reverse lever is sews normal. I tried to figure it out for hours but need help.
Thank you in advance if you can help me.
Make sure your motor and hand wheel are spinning in the proper direction.The top of the hand wheel needs to move towards you. Some older clutch motors may start up in the wrong direction. The machine won't actually make stitches because the hook spins backwards, but it will "appear" to sew in the opposite direction.
Holy shit this video is good👏
Muy muy beno
I need to get my Singer 111W153 working. I moved a bunch of things cleaning it and trying to get it to work but messed it all up. This will give me a starting point. This is very much like the 111W153 is it not. less the reverse. Thanks
this is certainly the best video i've seen so far. Thank you so much. I have a techsew 7250 pro. I would so love more information about this machine as i live in Australia. do you know of a machine that is similar that i could use the manual of??
+Wendy Gordon I've not heard of a Techsew 7250 Pro. There is a Techsew 2750 Pro available here in North America, which is a copy of the Juki LS-341 or LS-341N.
+Uwe Grosse Wow, i am so pleased to hear from you. You are right, it is the 2750pro. I am having trouble with it skipping stitches when i get onto the seam to make a nice edge stitch, so maddening!! Thank you for talking.
+Wendy Gordon The Juki LS-341N Engineer's manual shows how to check and adjust the hook timing, a likely cause for skipped stitches: dixiesewingmachine.tzo.com/MANUALS/JUKISERVICE1/LS-341N,%20LS-341N-7%20Engineer%20Manual.pdf
+Uwe Grosse Thank you so much for your help. i will give this manual a try. Your the best!
+Wendy Gordon Hello, me again. I have fixed my machine using the engineers manual. Thank you so much
Hallo. Finde Ihre Videos die besten im Nähmaschinenetechnikbereich! Ich habe eine Pfaff 541 und eine 141 (fast baugleich). Bei der 541er stimmt die Vorwärtsstichlänge nicht mit der Rückwärtstichlänge überein. Wo und wie kann ich das einstellen? Vorwärts habe ich 6mm max und rückwärts 4mm max. Auch zeigt das Stichloch rückwärts eine leichte "Ziehbewegung" als wäre das Timing Untertransport und Nadel nicht exakt. Ich wäre sehr froh um einen Hinweis wie ich das korrigieren kann. Danke!
Hi Uwe,
Amazing video! I learned a lot from it.
There is still one problem with my machine, that I hope that you can help me with.
It is sewing backwards! And I have no idea why. I've had it rewired to fit to my shops outlets, why I thought the poles was reversed, but my electrician said that, that is not the case.
When he left me the first time, it was sewing perfectly, but then I had to change the stitch-length, and it has been sewing backwards ever since.
Do you have any idea of how to fix this? :)
Thank you in advance!
Kind regards,
Simon
If it's your motor that actually spins backwards, then if it's a three phase clutch motor (unlikely in a domestic setting) you'll need to swap any two of the three power leads and the motor will spin the other direction. I'm not sure I trust your electrician entirely. What exactly did he "rewire" to fit your shop?
If your motor is a single phase clutch motor, it may simply start spinning in the wrong direction occasionally. If so, just power off the motor, then turn it on again while you"help" it get started in the right direction by pressing the pedal and turning the handwheel in the correct direction - let go of the pedal as soon as it start spinning up. Get a modern servo motor when you get tired of this game.
If your motor and handwheel spins in the correct direction, but your machine still sews backwards when it shouldn't, then something totally different is going on. You'd have to be more specific about how exactly you "had to change stitch-length."
But in reality I can't really do individual troubleshooting remotely via UA-cam on a global basis beyond what I typed just now. I'm available for individual remote consulting and troubleshooting via Skype or Facetime. My hourly rates are the same as your local plumber or electrician :-)
I have a feeling that he has done something wrong, and that your first suggestion is the right one :) I'll have him come back and check up on it. I did everything in your video, to be sure it was set up correctly, and now it is.
He put in new cables, beause the guy i bought it off had just cut them at the starter-box.
It is a Jugi LU 563 that has been used in a autoupholstery shop, why I don't think it is a domestic setting, as you write.
Thank you so very much to have taken the time to answer my question, it is real kind of you :)
Kind regards,
Simon
Hi... great video..
Im having a problem with my juki 563.. the stitching it got small and gets bigger as i increase the speed, gets smaller as i slow down. I also noticed a play on the feed dog..
Please help. Thanks
There should be no play in the feed dog movement. Find out why the feed dog has play and fix that first.
Uwe Grosse actually the play is with tha middle foot together..it looks like is coming from a piece on the bottom where the changing stitch botton presses down to.. that piston like arm has play..
Uwe Grosse hi.. i made a video to show you the issue with my juki..
It was working fine.. and out of a sudden it started doing this.. please help.. thanks. ua-cam.com/video/ph9TckrqdCE/v-deo.html
Hi. My Juki lu 563 is leaving marks from the feed dog on my leather. i looked at the manual and it says to tuen ta screw that looks like its behind the little pole with the multiple holes. well, the screw will not turn to the left anymore..and turning it right will tighten or increase pressure. what can I do?
Sewing leather without leaving any marks can be tricky (and sometimes impossible) and there's no simple answer. Discussion forums like www.leatherworker.net (forum: leather sewing machines) are filled with lengthy discussions about just that topic. Many factors are involved: type of leather, presser foot spring strength, feed dog and presser feet with or without teeth, feed mechanism, throat plate design, and so forth.
+Uwe Grosse
how can I fix the issue of the middle foot shifting to the right when its all the way down? could it be going down too far...in turn putting too much pressure on the leather?
+Uwe Grosse
how can I fix the issue of the middle foot shifting to the right when its all the way down? could it be going down too far...in turn putting too much pressure on the leather?
just curiosity, i know that you have consew 225 and singer 111w155, which are same machines exactly. what are the differences compared to lu-563? can you check it? maybe bobbin size, maybe take-up lever stroke distance...
Yes, the bobbin and hook size are larger on the 563, and also a few associated bits like hook saddle, take-up lever etc. The other big thing is that the lu-563 has reverse, which neither the 225 nor the 111w155 have.
@@UweXY thank you very much!
Awesome & great videos man. I have a singer 111G156 my Big walking foot doesn't lift while sewing like the one showed here. is there a way to correct this or is that the way the machine is set up? also, is there a way to tighten the tension on the bobin, my top thread seems to be pulling too hard and I released most of the tension there. I was thinking maybe I need to tighten the bobin tension to resolve this problem. any help would be greatly appreciated. keep up the good work with the videos.
Your machine should work the same . Page 17 of the manual (www.manualslib.com/manual/364314/Singer-111w156.html) also describes how to adjust the presser foot walking height. There may be other adjustment issues. The outer foot only lifts up if the inner foot can press against the feed dog. The outer foot uses the inner foot as leverage via linkages to lift up. My video about replacing the thread tension release guide (ua-cam.com/video/4aSNYzUTnW4/v-deo.html) shows how the linkages inside the head work and how they should be adjusted.
Also, there's a tiny screw on the thread tension spring on the hook that allows you adjust the bobbin thread tension. The manual mentioned above should cover this.
+Uwe Grosse thanks so much this has really been helpful. I got everything set, but I think I screwed it all up when I adjusted the feed dogs. now instead of 5 spi, I get 12 spi. do I need to realign/set the stitch wheel to 12 to match the stitches that I currently have?