I love the Mt Pilot amp. When I was EMS for Forsyth County, I was able to see Pilot Mt driving up 52 for calls near the northern end of the county. Super cool.
I am looking to buy the solderless Telecaster 4 way switch. What Tele control plates will this fit into? I want to make sure the spacing does not become an issue.
The Fender USA plate is the best one and what we used to get our spacings from. Some of the others may require you to lengthen the switch slot for the 4-way switch to fully engage into the 4th position.
The Strat in the video has one large cavity. There is enough space to slide the pick guard from under neck. So he could have left the neck in place. My Strat however has 3 small cavities fitting around the pickups without any room to slide sideways. So I had to pop the neck. It did not quite work as in the video though. The neck would not come out of the pocket until I loosened the screws all the way. I am very happy with my '58 Quiet Coil HSS pickguard.
@ I feel really dumb. Lol it was so easy. Wonderful product guys, seriously great sounding pickups. I also have your 58clones on my epi 335. Consider me a customer for life.
I just got a Mojotone pre-wired pickguard and this was very helpful. Thanks!
I love the Mt Pilot amp. When I was EMS for Forsyth County, I was able to see Pilot Mt driving up 52 for calls near the northern end of the county. Super cool.
just got my Brownie layla guard.....very excited
Cool so where do the pickups get plugged in?
I've never heard of removing the neck for a pickup install . I have a 22 fret neck. Is this really necessary?
It's not always necessary but we demonstrated it in case you run into a snag with your particular 22 fret neck.
I didn’t remove the neck and it slid under fine
Great tutorial but background music was a distraction and blocked the instructor vocal.
Hi can you please do a tutorial for the tele wiring harness + quiet coil tele pickups install? Thank you vm!
^^^^
This!
Love it. Fit on a Schecter Route 66? The pickguard 11 holes is standard or fit just on Fender Strato?
It's a standard 11 hole guard. We cannot guarantee it will fit but it's very possible!
I cannot get this to work properly after four temps still… only my Bridge pick up will work. Any suggestions?
Buster please contact us via tech@mojotone.com and we will get you going!
@@mojotoneofficial il do that. thank you! 👍🏼
I am looking to buy the solderless Telecaster 4 way switch. What Tele control plates will this fit into? I want to make sure the spacing does not become an issue.
The Fender USA plate is the best one and what we used to get our spacings from. Some of the others may require you to lengthen the switch slot for the 4-way switch to fully engage into the 4th position.
Does this mean u don’t need to solder the one ground to the trem claw area underneath as usual?
no, you still do that
What pickup set is this on the video? I love the tone!! Thanks!!
Do you really need to pop the neck to install the pickguard?
Not if it's a 21 fret neck, he said it at the beginning ;-)
The Strat in the video has one large cavity. There is enough space to slide the pick guard from under neck. So he could have left the neck in place.
My Strat however has 3 small cavities fitting around the pickups without any room to slide sideways. So I had to pop the neck. It did not quite work as in the video though. The neck would not come out of the pocket until I loosened the screws all the way.
I am very happy with my '58 Quiet Coil HSS pickguard.
Why change the outputjack? Fender jack not good enough?
This is so it’s less soldering.
puretone jacks are so much better
Thanks!
could this put into Squire Classic Vibe 50 ,anyone could help?
It should be able to but if the pickguard is smaller holes just get a usa one
Hi do you guys ship international?
I didnt see where you connected the tremolo ground wire
He twisted together with the jack ground wire and screwed it in the ground side of the solderless connector. Works perfectly
Does this fit a 2016 Mexican strat ?
Yes
Make a step by step for installing the 4 way tele solderless wiring setup.
Sure the heck wished people would NOT have to hear this music playing as the instructor is teaching 😖😵😳🤯
Good video but the backing track music was completely distracting, not to mention total crap.
this vidoe did not do the company or produce justice , just lost a sale
did you even read the title? this was just an installation video, not a sales pitch for the product.
@@BLOVECU SIXFOURSOUL IS JUST TO IGNORANT TO UNDERSTAND .VIDEO WAS EXCELENTE. KEEP UP THE GOOD WORK !
New ones are different wish there’d be a new video
Hello! You can view our new install video here: ua-cam.com/video/79j2bkFayJQ/v-deo.html
@ I feel really dumb. Lol it was so easy. Wonderful product guys, seriously great sounding pickups. I also have your 58clones on my epi 335. Consider me a customer for life.
@@alivonal7442 Thanks for choosing Mojotone! You Rock!