@@collegerebel that's what almost half of my figures have, my booster gold has two left legs and my dead man and blue beetle has two left or right joints, it doesn't effect the articulation but it is noticeable.
His head is like this because it’s the Batman Hush Buck.. that’s been used multiple times. I assume it could be mold degradation? Personally as much as I like the figure (I too have this Plat version) I really think he should have used the Knightfall Batman buck. Batman wasn’t this bulky back in his first issue anyway.
I think if you put your mind in to it you could fix it easily. Heat it up and break it a part. Use small tools and try to pull out the broken part. Try to find some figure cheaper but similar to this one, heat it up, take the part/s that you need and just exchange them with the one that is broken. I know it is a rare figure, but ask yourself do you want to spend more money on the same figure or maybe try to fix it? If you take the "fix it" option, remember, patience is gold. Don't be frustrated. It happens unfortunately.
Just did this same thing with a black hush figure, but I grabbed a flathead, heated up the head and popped out the ball peg. I think I'm going to pop the head on the new JLA Batman body anyway, so it works out 😂👍
I'm skeptical of this situation because you say you just turned the head and it broke, however immediately after saying that you kink the wire in the cape to all hell lol.
I hate Mcfarlane toys. If I buy DC I buy Mafex. Worth the money for a high quality figures. I hope Hasbro get the DC license so I don't have to buy expensive figures.
Understandable,my biggest problem with McFarlane is he can't make an entirely comic accurate figure, when I get a comic book figure I want it to look like it jumped off the page.
My opinion but McFarlane is a waste of the DC license. Look up David Vonner Batman or unproduced Mattel Batman if you’ve not seen it. It’s like a gut punch seeing what could have been.
Because it’s unreleased, it’s a prototype and we don’t know for sure that’s what we would have gotten. If we did get that the 2020 - present Mattel dc figure would have been $30 to $40 for basic 6” scale figures and BAF’s would have been $35 to $45 or more. With better quality/accessories comes higher prices, but I admit that the Mattel figure you’ve pointed out looks great!!
That's bulcrap. I believe ya even know it wasn't on camera. You can pretty much tell! Top of the head looks weird too. Really unfortunate because I was wanting one for my birthday.
You don't need to subscribe to me just because you feel sorry, if you do get the figure make Sure to heat the neck with hot water before twisting the head, I myself need to do that before posing my figures, thanks for watching.
Damn I hurt for you because I collect figures too Very frustrating as hell when that happens I'm very sorry 😢 But glue the head don't leave it as a running joke The only figure from Todd the Odd Mcfarlane that broke in my at the arm was the year two Batman my favorite Batman look too 😢
Sidenote the purple gloves were a printing error. And the Hush Batman I think has the Neck and head connected so it's NOT the only Batman with that neck joint you should heat figures before posing.... Lesson learned
Absolutely brutal. My Steel's Hammer snapped in 2 places right out of the box. I contacted McFarlane and they offered to recocomend me some glue lol
More like defective Batman #27
hahaha
lol good one
@@joeguido2931 I still want the platinum chase, but all my plat’s stay boxed up
tbh since McFarlane just doesn't scale with the rest of my collection i would probably just buy this version to steal his cape for a custom.
good luck to you, that cape might be a pain to remove
McFarlane Toys have *always* had QC issues. His figures have been notorious for breaking since the 90's.
my biggest problem isn't that they break it's when they give a figure two left feet or a right arm joint for both arms.
@@rowntreeplayz
Oh. So more QC issues.
@@collegerebel that's what almost half of my figures have, my booster gold has two left legs and my dead man and blue beetle has two left or right joints, it doesn't effect the articulation but it is noticeable.
His head is like this because it’s the Batman Hush Buck.. that’s been used multiple times. I assume it could be mold degradation? Personally as much as I like the figure (I too have this Plat version) I really think he should have used the Knightfall Batman buck. Batman wasn’t this bulky back in his first issue anyway.
and he wasn't seven foot
I think if you put your mind in to it you could fix it easily. Heat it up and break it a part. Use small tools and try to pull out the broken part. Try to find some figure cheaper but similar to this one, heat it up, take the part/s that you need and just exchange them with the one that is broken. I know it is a rare figure, but ask yourself do you want to spend more money on the same figure or maybe try to fix it? If you take the "fix it" option, remember, patience is gold. Don't be frustrated. It happens unfortunately.
Sorry about the Batman breaking that stinks but awesome looking figure & review
Thanks
I wish I didn't create the "Breaking of the bat".
Well looks like joker finally broke Batman.
that was pretty fast since that's Batman's first appearance, hope McFarlane does a first appearance Joker.
Just did this same thing with a black hush figure, but I grabbed a flathead, heated up the head and popped out the ball peg. I think I'm going to pop the head on the new JLA Batman body anyway, so it works out 😂👍
I don't know why McFarlane made the neck and head together it make the joint easier to break.
Shartimus Prime broke the same figure on his right arm during the review as well. This version of the figure seems to have problems
that's why I didn't move that joint much in the video
I'm skeptical of this situation because you say you just turned the head and it broke, however immediately after saying that you kink the wire in the cape to all hell lol.
Everyones’ a detective online🕵️♀️
two tone cape ? have only ever seen the all black cape purple gloved version nice
//
that one is nice but after this I don't think I'll pick that one up.
I hate Mcfarlane toys. If I buy DC I buy Mafex. Worth the money for a high quality figures. I hope Hasbro get the DC license so I don't have to buy expensive figures.
Understandable,my biggest problem with McFarlane is he can't make an entirely comic accurate figure, when I get a comic book figure I want it to look like it jumped off the page.
I wish those figures came out when I started collecting figures (well I was but it was mostly imaginext and Super hero squad)
My opinion but McFarlane is a waste of the DC license. Look up David Vonner Batman or unproduced Mattel Batman if you’ve not seen it. It’s like a gut punch seeing what could have been.
Because it’s unreleased, it’s a prototype and we don’t know for sure that’s what we would have gotten. If we did get that the 2020 - present Mattel dc figure would have been $30 to $40 for basic 6” scale figures and BAF’s would have been $35 to $45 or more. With better quality/accessories comes higher prices, but I admit that the Mattel figure you’ve pointed out looks great!!
the knightfall stomps on that batman
see if mcfarlanes customers support can help you
it's fine but if it happens again I 100% will
That's bulcrap. I believe ya even know it wasn't on camera. You can pretty much tell! Top of the head looks weird too. Really unfortunate because I was wanting one for my birthday.
You don't need to subscribe to me just because you feel sorry, if you do get the figure make Sure to heat the neck with hot water before twisting the head, I myself need to do that before posing my figures, thanks for watching.
my JLA wally west flash's head wing lightning bolt broke off when trying to pose the figure after opening it lol
Sorry to hear that
McFarlane cq issues that's why I don't buy them.
Understandable
The head joint isnt new its been done on this body for 3 year's you should have boiled it to losen the joints
I should of I didn't expect it to break but after this video I've been heating up the joints before moving them
@rowntreeplayz yeah it can happen with any brand I've had to do it with all my legends it's good there tight but just a bit to tight out of the box
@@theotherguy21 I only have to do that with the ones in the plastic free packages
@rowntreeplayz yup I had to do it with the renew your vows 2 pack
@@theotherguy21 lucky
do you want me to glue the head or use the broken figure as a running joke Y/N
Damn I hurt for you because I collect figures too
Very frustrating as hell when that happens I'm very sorry 😢
But glue the head don't leave it as a running joke
The only figure from Todd the Odd Mcfarlane that broke in my at the arm was the year two Batman my favorite Batman look too 😢
What ever
@@Christian_Ada1 well at least it was one broken figure out of my 25 other reviews that didn't break
Contact his customer support they're actually about stuff like that if he has a replacement.
Sidenote the purple gloves were a printing error.
And the Hush Batman I think has the Neck and head connected so it's NOT the only Batman with that neck joint you should heat figures before posing.... Lesson learned
That’s why I quit the batman mcfarlane figure it sucks nowadays. I just save my money to buy high end statues.
Understandable, personally I'm more of a action figure guy because I like having a statue I can pose anyway I want to and pose with other figures
Glue the head bro, is a really nuce figure
cheap quality, defective product
This is the first McFarlane figure I own that was stiff and broke,the other ones I own are better quality, wish this one was the same.
Thats a weak batman collection no cap lego really are u 3
Of course I don't have cap, captain America is a marvel character
Same here, thanks