I made some hooves like this out of wooden 6x6 cut at an angle. I sculpted them into hooves and used cheap work boots for the uppers. Wore them for many years, but my knees aren't strong enough to take the stress anymore.
Protip: You can mix in (clean) cat litter gravel with the epoxy to make a sort of concrete that's as strong or stronger, using a franction of the epoxy resin and is also a bit lighter in weight for the same volume. A heat gun to heat the epoxy will get rid of some of the bubbles, as will vibration.
I did the same thing with mine, but I pulled the sole cover off, then pulled the metal tabs out with a hammer. Got the sole off the heel, removed the plastic shoe shape and was left with the sole by itself. I used rubber split sole ballet slippers and applied those directly to the sole frame I butchered. I made the hoof from layers of firm packing foam (high quality and all I had on hand) and then put the non slip rubber grip I separated from the sole earlier to the bottom of the hoof to gain more traction. It’s flexible, comfortable and made without resin or forms for under $40. Couldn’t be happier. (I also did an extended hoof like you showed at the end by adding 2 dowels that ran parallel with the arch into the hoof and used my foam and hot knife to add a natural looking ridge on the arch and heel.) Great tutorial if I ever want a sturdier material for outdoor use though!
Recently used your method at making these kinds of hooves. Everything worked! We used a saw to take off the heels and mayyyyy have broken said saw oops
Thanks for watching! The resin is very sturdy, just heavy. It would be difficult to break. I chose stiletto shoes because they're sturdy too, just be careful (and patient) when removing the heel.
@@bruh-bh3kk I imagine so. I don't think they'd crack unless impacted pretty hard, but I'm no expert. Give it a go! I encourage creative experimentation!
@Dare_to_Nerd ❤❤❤ Thanks for this video! I just stumbled across it. I am still old school EVA foam covered in different colors of cork fabric. Or just fabric painted with random kinds of paint. (Good surprises with that and yarn painted too! ). I haven't explored resin yet because of cost of start-up space but can't wait!!! Omg to make my own eyes will be the best. Thanks again for the video, it was super helpful! I'm imaging the shapes for soled on every day shoes 4 the waterproof. Edit: ooops repost 😢sorry put this under a reply about the faire lol. My mistake!🎉😂😊😅🎉
Thank you for watching! I'm glad this was helpful. 😊 EVA foam is definitely a great, cost-effective method. The resin is much heavier, but also sturdier and weatherproof. I would also check out liquid plastic, like Smooth-On 320. It's expensive, but also lighter weight, I think.
It took roughly 500 ml or 2 cups for one hoof. I used one mold for both hooves, but if you want to make a "right" and "left" hoof, use twice as much. However, I mentioned at the end of the video that I wish I had added more to the back of the hoof, so I could lean my weight back a little more. There may also be a better resin than the one I used - one that doesn't get so many bubbles along the surface. I would look for a slow cure resin and maybe pour only a couple inches at a time to help eliminate bubbles. One more thing, to get the heel off the shoe look for the staple and try to pry that out. DON'T try to cut off the heel with power tools (like my idiot self 😅)! It may take longer to pry the staple out of the heel of the shoe, but it is much safer and will result in less damage to the shoe itself. Hope this helps! Let me know how it goes! 😄
Apologies for the late reply! Yes, I tore the faux leather (or whatever that material is) up when I was taking off the heels 😅. To attach the shoes back to the heels, used 5 Minute Epoxy (two-part resin) as an adhesive. To give more surface area for the adhesive to bond to, I filled some of the square holes in the soles with hot glue. 10:10 - 10:50 in the video. I hope this helps!
They look stunning! I wanted to ask, did the strap sewn to the shoe help prevent your heel from lifting out of the shoe?? That’s one thing I’m struggling with, haha. Awesome work!
Thank you! Yes, it helps quite a bit. I also put fake fur around the shoe that goes up the ankles; that also helps keep the heel in the shoe. I sowed a zipper on the inside of the ankle, so I could get my foot in easier.
I have a desire to make galaxy hooves I think it would be fun Do like glitter and stuff inside the hooves themselves Will I do it? Probably not, but man I want to
I encourage all artistic whimsy! If it's resin, you could probably use mica powder and/or alcohol inks to make beautiful galaxy colors. The easiest way is the paint them, I think.
Could something similar be done, but instead of having the hooves on the bottom they could be over the top of the shoe to simulate the look of hooves and still having a flat shoe to walk on?
Probably the silicone mold maker. Sometimes the stuff I get is red, sometimes clear. I actually used both making the mold for the hoof 😅. Best of luck with your costume!
Do you think I'd be able to 3d print hoofs off, I don't have resign or clay but I do have a 3d printer and a resign 3d printer but I don't know if they would be able to hold my weight.
I imagine so. 🤔 I've seen some pretty sturdy items made from 3d print, but I'm not sure which filament was used. Unfortunately, I don't have a 3d printer, so I can't say for sure. Let me know if you try it out!
Quick question- how do you walk in those so well? I have a pair but I’ve never walked in heels and I’m having a hard time going more than 3 minutes with no walking stick or support
It does take practice, and I would plan for frequent breaks at a ren faire or convention. Luckily, the character I made these for also has a tall staff that I can use as a walking stick. 😅
@@CorvusTheSkull Best of luck! I'd get a half size larger than what you wear and put in some gel "ball-of-foot" cushions like the ones ballerinas put in point shoes.
I need help someone I want to do these really bad but 1: I am scared of resin 2: I can not afford resin and it’s supplies 3: I can’t find any shoes that are cheap and fit me because I wear a size 13 in women’s
Finding a cheap size 13 is rough. There may be some online stores that offer them for cheap, but watch out for the shipping costs - sometimes they'll get you there. Foam is a cheaper alternative to resin, though you won't be able to walk on the foam directly. I've seen a couple videos on youtube that made the hooves from foam.
I haven't tried to make bird feet yet, but I did find this tutorial a while back: rah-bop.tumblr.com/post/153955401586/bird-feet-tutorial-i-made-these-feet-for-my-kenku I think a shoe with a more solid base would help support you while walking on your toes, but they used ballet slippers. I'm not sure which is better.
I need to know where i cab get the mold to make the hoofs ! I saw someone use epoxy . But this is a good one too ! Maybe I’ll use this but I’m not a good molder
i plan to be making a reshiram gijinka what this technique and making the shoe come down to the ground a little more. im stoked to try this out eventually, though my real concern is ofc going to be the resin cost and handling. is it hard to walk in those shoes? i have really walked in stilettoes before.
That sounds awesome! This epoxy resin turned out a little heavy, so I want to try using Smooth-Cast 320 (liquid plastic) instead. It think it might be a lighter-weight, but unfortunately, not less expensive. Walking in stilettoes is hard on your feet in general, especially for long distances (like going to ren fair). The main issue I've had is walking on soft ground - the shoes sank into the ground easily and made me lose my balance. But walking indoors, on the road, or on hard dirt paths has been fine.
They did well on solid surfaces like gravel and hard, packed dirt. On soft dirt with grass (like after a rain), they wanted to sink into it, so I had some trouble balancing.
No UV resin. I used Mold Maker for the silicone. For the resin, I used a two part epoxy. I believe it was the Rockstar brand. There may be a better resin to use for the hooves - one that doesn't get a lot of bubbles - but I'm not sure what it is. I know Chaos Costumes uses a resin that changes from clear to opaque white as it dries. Hope this helps!
Hello! I made it myself. It did use a lot of silicone, so I recommend making the container as small as possible (without touching the clay model of course).
It looks like the professionals use oven bake clay, which is more expensive, but less likely to crack when drying. I think I got lucky that my airdry clay didn't break up, and it was still soft when I pulled it out of the silicone. Yes, some silicone is really stiff and hard to demold. Using a mold release before pouring the resin in can help.
@@Dare_to_Nerd I actually thought about this! I bought more silicon to try again (with mold release) and I'm really nervous about it, but I'm really excited too, I'm not sure where I can find oven bake clay, but I'll try the same thing you did in your video, using the clay while it's still soft
@@Luka_noceda Also, look into using liquid plastic (Smooth-Cast 320) instead of resin. That's what ChaosCostumes used. I think it will be lighter weight.
Hi! Sorry for the late reply. From what I've heard, you want a high heel with a hard, rigid base, like a stiletto. This helps to support you and keep the high-arch shape. Hope this helps!
Probably. Air dry tends to crack easy. Even oven bake clay I wouldn't trust to hold my weight and withstand the impacts of walking. I did use air dry clay to sculpt the original hoof so I could make a mold. If that's what you mean, then it should work.
It took roughly 500 ml or 2 cups for one hoof. I'm going to try to use Smooth-Cast 320 (liquid plastic) for my next pair to see if it's a better material than resin.
About 500 ml or 2 cups for one hoof. I also found out that other artists use Smooth-Cast 320, which is more of a liquid plastic than a resin. I'm thinking of doing another set of hooves to see if I can improve on them.
Hey, I just want to know how much it cost you to make those. I's really love try but I'm not really sure that I'll have enough money and time ^^' Thank you for your video btw❤️
Thanks for watching and apologies for the late reply! The resin wasn't cheap. I can't remember the exact cost, but between the shoes, clay, and resin, I probably didn't save that much money. I want to try using liquid plastic instead of resin to see if it's lighter, but I don't think it's cheaper. I've seen ones on etsy that were very decent prices considering the cost of materials. ChaosCostumes has a good reputation.
Definitely works. I’ve made some. Wouldn’t recommend, especially with the wood i used (I think it was two planks of balsa wood? [Correction: it was pine] I couldn’t find the right thickness so I screwed two planks together.) Wearing the hooves for more than an hour was painful, but probably could be improved with some gel soles. I painted over my wood hooves with acrylic, and made the mistake of taking them outside after the convention I wore them to, so they attracted all sorts of leaf litter and the bottoms of the hooves started splintering off.
I made some hooves like this out of wooden 6x6 cut at an angle. I sculpted them into hooves and used cheap work boots for the uppers. Wore them for many years, but my knees aren't strong enough to take the stress anymore.
Protip: You can mix in (clean) cat litter gravel with the epoxy to make a sort of concrete that's as strong or stronger, using a franction of the epoxy resin and is also a bit lighter in weight for the same volume.
A heat gun to heat the epoxy will get rid of some of the bubbles, as will vibration.
I did the same thing with mine, but I pulled the sole cover off, then pulled the metal tabs out with a hammer. Got the sole off the heel, removed the plastic shoe shape and was left with the sole by itself. I used rubber split sole ballet slippers and applied those directly to the sole frame I butchered. I made the hoof from layers of firm packing foam (high quality and all I had on hand) and then put the non slip rubber grip I separated from the sole earlier to the bottom of the hoof to gain more traction.
It’s flexible, comfortable and made without resin or forms for under $40. Couldn’t be happier. (I also did an extended hoof like you showed at the end by adding 2 dowels that ran parallel with the arch into the hoof and used my foam and hot knife to add a natural looking ridge on the arch and heel.)
Great tutorial if I ever want a sturdier material for outdoor use though!
Nice! Foam is a great flexible - and more affordable - option. I'll have to try out your method some time!
Godbless this video 😭😭 I'm planning on making hoof shoes soon for a ren faire and this helps out so much!!!
Happy to help! Have fun at the ren faire!
omg me too!
@@danny8284 ooo will you be dressing up?
Recently used your method at making these kinds of hooves. Everything worked! We used a saw to take off the heels and mayyyyy have broken said saw oops
Yeah, using the saw was scary; be careful! I'm so glad it worked though! YAY! 😄
Wish I was confident enough to wear something like that in public😭😭
I wanna make these so bad! I'm just scared of both resin and the shoe breaking
Thanks for watching! The resin is very sturdy, just heavy. It would be difficult to break. I chose stiletto shoes because they're sturdy too, just be careful (and patient) when removing the heel.
@@Dare_to_Nerd would concrete work?
@@bruh-bh3kk It would be heavy.
@Dare to Nerd but do you think it would be able to support someone's bodyweight without cracking 🤔
@@bruh-bh3kk I imagine so. I don't think they'd crack unless impacted pretty hard, but I'm no expert. Give it a go! I encourage creative experimentation!
Hey this was really cool! As a fellow nerdy girl, I’ll be looking forward to future videos!
Thank you! ☺
@Dare_to_Nerd ❤❤❤ Thanks for this video! I just stumbled across it. I am still old school EVA foam covered in different colors of cork fabric. Or just fabric painted with random kinds of paint. (Good surprises with that and yarn painted too! ). I haven't explored resin yet because of cost of start-up space but can't wait!!! Omg to make my own eyes will be the best.
Thanks again for the video, it was super helpful! I'm imaging the shapes for soled on every day shoes 4 the waterproof.
Edit: ooops repost 😢sorry put this under a reply about the faire lol. My mistake!🎉😂😊😅🎉
Thank you for watching! I'm glad this was helpful. 😊
EVA foam is definitely a great, cost-effective method. The resin is much heavier, but also sturdier and weatherproof. I would also check out liquid plastic, like Smooth-On 320. It's expensive, but also lighter weight, I think.
Very cool looking hooves!
Thank you! ☺
OMG thanks so much!! I will definitely be making my own hooves with this!! :D
Also I have a question! About how much resin did you use to make both hooves if you remember? It would help out a lot!
It took roughly 500 ml or 2 cups for one hoof. I used one mold for both hooves, but if you want to make a "right" and "left" hoof, use twice as much. However, I mentioned at the end of the video that I wish I had added more to the back of the hoof, so I could lean my weight back a little more. There may also be a better resin than the one I used - one that doesn't get so many bubbles along the surface. I would look for a slow cure resin and maybe pour only a couple inches at a time to help eliminate bubbles.
One more thing, to get the heel off the shoe look for the staple and try to pry that out. DON'T try to cut off the heel with power tools (like my idiot self 😅)! It may take longer to pry the staple out of the heel of the shoe, but it is much safer and will result in less damage to the shoe itself.
Hope this helps! Let me know how it goes! 😄
Ok thanks!! I’ll let you know how it goes when it’s complete!! 😁
How did you attach the upper portion of the shoes back to the soles? (And somehow you tore the leather ALL up)…
Apologies for the late reply! Yes, I tore the faux leather (or whatever that material is) up when I was taking off the heels 😅. To attach the shoes back to the heels, used 5 Minute Epoxy (two-part resin) as an adhesive. To give more surface area for the adhesive to bond to, I filled some of the square holes in the soles with hot glue. 10:10 - 10:50 in the video. I hope this helps!
They look stunning! I wanted to ask, did the strap sewn to the shoe help prevent your heel from lifting out of the shoe?? That’s one thing I’m struggling with, haha. Awesome work!
Thank you! Yes, it helps quite a bit. I also put fake fur around the shoe that goes up the ankles; that also helps keep the heel in the shoe. I sowed a zipper on the inside of the ankle, so I could get my foot in easier.
I have a desire to make galaxy hooves
I think it would be fun
Do like glitter and stuff inside the hooves themselves
Will I do it? Probably not, but man I want to
I encourage all artistic whimsy! If it's resin, you could probably use mica powder and/or alcohol inks to make beautiful galaxy colors. The easiest way is the paint them, I think.
Could something similar be done, but instead of having the hooves on the bottom they could be over the top of the shoe to simulate the look of hooves and still having a flat shoe to walk on?
Hi I was wondering what the red stuff is , I’m also trying to make a hoof for my Halloween costume this year.
Probably the silicone mold maker. Sometimes the stuff I get is red, sometimes clear. I actually used both making the mold for the hoof 😅. Best of luck with your costume!
0:25 It’s my will to live? :D
0:31 FUCK!!
🤣 🤣🤣
Hi! I was wondering how much silicone you used for the mold?
Do you think I'd be able to 3d print hoofs off, I don't have resign or clay but I do have a 3d printer and a resign 3d printer but I don't know if they would be able to hold my weight.
I imagine so. 🤔 I've seen some pretty sturdy items made from 3d print, but I'm not sure which filament was used. Unfortunately, I don't have a 3d printer, so I can't say for sure. Let me know if you try it out!
@@Dare_to_Nerd I will, im thinking about printing some off this weekend
What size screws did you use for the resin not to crack
I don't remember exactly, but I did pre-drill the holes to avoid cracking.
Funnily enough, I'm also here for my Fearne!
Bidet! 😁
Quick question- how do you walk in those so well? I have a pair but I’ve never walked in heels and I’m having a hard time going more than 3 minutes with no walking stick or support
It does take practice, and I would plan for frequent breaks at a ren faire or convention. Luckily, the character I made these for also has a tall staff that I can use as a walking stick. 😅
@@Dare_to_Nerd ah okay! I was gonna buy one anyways, and I have till October to practice, so that’s good!
@@CorvusTheSkull Best of luck! I'd get a half size larger than what you wear and put in some gel "ball-of-foot" cushions like the ones ballerinas put in point shoes.
Start walking around your house on your toes, no heel to develop the necessary muscle and balance
I need help someone
I want to do these really bad but
1: I am scared of resin
2: I can not afford resin and it’s supplies
3: I can’t find any shoes that are cheap and fit me because I wear a size 13 in women’s
Finding a cheap size 13 is rough. There may be some online stores that offer them for cheap, but watch out for the shipping costs - sometimes they'll get you there.
Foam is a cheaper alternative to resin, though you won't be able to walk on the foam directly. I've seen a couple videos on youtube that made the hooves from foam.
@@Dare_to_Nerd thank you ✨✨ this actually really helps
@@meganbroomhall6013 happy to help! 😁
Hi, if I'm a guy who wants to create bird feet, what kind of shoe do you recomend and how can I will custom that shoes? you have a tuto?
I haven't tried to make bird feet yet, but I did find this tutorial a while back:
rah-bop.tumblr.com/post/153955401586/bird-feet-tutorial-i-made-these-feet-for-my-kenku
I think a shoe with a more solid base would help support you while walking on your toes, but they used ballet slippers. I'm not sure which is better.
@@Dare_to_Nerd thanks, and continue making this videos, are awesome.
@@Yadrehabed Thank you! I wish I could be more help.
I need to know where i cab get the mold to make the hoofs ! I saw someone use epoxy . But this is a good one too ! Maybe I’ll use this but I’m not a good molder
I say, give it a shot! I used a two part silicone mold mixture. Most craft stores should have them, but they can be expensive.
@@Dare_to_Nerd yes but you had the shape in order to make the mold !
@@daciasdiy1861 Ah! Yes, I made that out of clay.
i plan to be making a reshiram gijinka what this technique and making the shoe come down to the ground a little more. im stoked to try this out eventually, though my real concern is ofc going to be the resin cost and handling. is it hard to walk in those shoes? i have really walked in stilettoes before.
That sounds awesome!
This epoxy resin turned out a little heavy, so I want to try using Smooth-Cast 320 (liquid plastic) instead. It think it might be a lighter-weight, but unfortunately, not less expensive.
Walking in stilettoes is hard on your feet in general, especially for long distances (like going to ren fair). The main issue I've had is walking on soft ground - the shoes sank into the ground easily and made me lose my balance. But walking indoors, on the road, or on hard dirt paths has been fine.
How did you make the silicone mold? Was it Just liquid silicone?
Yes, it was liquid silicone.
Can you tell how high was the high heel?
How comfortable is this type of shoe to walk in?
As comfortable as a high heeled (stiletto) shoe.
How to these hold up outside on gravel and dirt and stuff?
They did well on solid surfaces like gravel and hard, packed dirt. On soft dirt with grass (like after a rain), they wanted to sink into it, so I had some trouble balancing.
Material list plz?
Where did you get the thing for the silicone
I think I got the silicone at Hobby Lobby.
Hello! What mixes did you use to make the mold and the actual hoof?
And did you have to uv light it?
No UV resin. I used Mold Maker for the silicone. For the resin, I used a two part epoxy. I believe it was the Rockstar brand. There may be a better resin to use for the hooves - one that doesn't get a lot of bubbles - but I'm not sure what it is. I know Chaos Costumes uses a resin that changes from clear to opaque white as it dries. Hope this helps!
Hi! did you make the mold for the resin hooves somewhere or did you make it yourself?
Hello! I made it myself. It did use a lot of silicone, so I recommend making the container as small as possible (without touching the clay model of course).
I tried to so thia but the clay ended up breaking, i guess i shouldn't use it while completely dry? Idk why but the silicon was really hard to demold
It looks like the professionals use oven bake clay, which is more expensive, but less likely to crack when drying. I think I got lucky that my airdry clay didn't break up, and it was still soft when I pulled it out of the silicone.
Yes, some silicone is really stiff and hard to demold. Using a mold release before pouring the resin in can help.
@@Dare_to_Nerd I actually thought about this! I bought more silicon to try again (with mold release) and I'm really nervous about it, but I'm really excited too, I'm not sure where I can find oven bake clay, but I'll try the same thing you did in your video, using the clay while it's still soft
@@Luka_noceda Also, look into using liquid plastic (Smooth-Cast 320) instead of resin. That's what ChaosCostumes used. I think it will be lighter weight.
@@Dare_to_Nerd ooh I should have thought about that, but I already bought the resin, is the weight the only problem with resin?
@@Luka_noceda It's the only problem I've encountered so far.
Hey a question: Are they comfortable to wear? wont my calf muscles overwork while wearing them?
I'd say it does take practice. They're not bad on my calves, but my toe joints do get sore.
Quick question! What sort of shoes did you start off with? Did you just use shoes with a high heel? Any sort of recommendations?
Hi! Sorry for the late reply. From what I've heard, you want a high heel with a hard, rigid base, like a stiletto. This helps to support you and keep the high-arch shape. Hope this helps!
Did you wait 24 hours for the mold to cure or go right ahead with the resin?
I waited 24 hours.
If I made the Hooves out of air-dry clay do you think they would break?
Probably. Air dry tends to crack easy. Even oven bake clay I wouldn't trust to hold my weight and withstand the impacts of walking. I did use air dry clay to sculpt the original hoof so I could make a mold. If that's what you mean, then it should work.
hi ! how to you have the form for the resin pls
I made it from clay.
How much resin did you need for the pair?
It took roughly 500 ml or 2 cups for one hoof. I'm going to try to use Smooth-Cast 320 (liquid plastic) for my next pair to see if it's a better material than resin.
Im just hiring a welder to come out and cut the heel off lol
how much resin did you end up using for the hooves?
About 500 ml or 2 cups for one hoof. I also found out that other artists use Smooth-Cast 320, which is more of a liquid plastic than a resin. I'm thinking of doing another set of hooves to see if I can improve on them.
Hey, I just want to know how much it cost you to make those. I's really love try but I'm not really sure that I'll have enough money and time ^^'
Thank you for your video btw❤️
Thanks for watching and apologies for the late reply!
The resin wasn't cheap. I can't remember the exact cost, but between the shoes, clay, and resin, I probably didn't save that much money. I want to try using liquid plastic instead of resin to see if it's lighter, but I don't think it's cheaper.
I've seen ones on etsy that were very decent prices considering the cost of materials. ChaosCostumes has a good reputation.
I know how to make hooves but the part I’m having trouble with is getting the heel of these high heels off…
I had an extremely hard time too. This video had good tips:
ua-cam.com/video/Lxy9Q9FYbbM/v-deo.html
Hope this helps!
What about making the hooves out of wood?
I thought about that actually. It would be good whittling practice.
Definitely works. I’ve made some. Wouldn’t recommend, especially with the wood i used (I think it was two planks of balsa wood? [Correction: it was pine] I couldn’t find the right thickness so I screwed two planks together.)
Wearing the hooves for more than an hour was painful, but probably could be improved with some gel soles.
I painted over my wood hooves with acrylic, and made the mistake of taking them outside after the convention I wore them to, so they attracted all sorts of leaf litter and the bottoms of the hooves started splintering off.
Is this Sam ?
Can you do that with my high heels too, you would pay 160 euros
ChaosCostumes on etsy makes them custom for reasonable prices. She's much more experienced than I am, so I think you'd get better quality with her.