You are not declare what’s going on with scenario that our furuno ecdis support Filtering function. That means taking data after comparison of both sensors . In case that we lost the one , filtering automatically taking data from gps2 for example or we must change the priority from ECD/FILT to GPS2?
Hi Morten. Thank you for your videos. I have a NAVTEX connected to my Furuno ECDIS. Is there any possibility to transfer positions from NAVTEX msg to user chart or to manual update?
Hi Nick Kushnarov Sorry for the late reply Nick. First of all then i am really happy that you are watching our videos. Great question you have written to us. 😊 No you have to write them down manually and enter them manually in the Manual update or User chart. But it could be a great feature, i will suggest this to my bosses, thank for the idea💪 Take care of yourself and have a great day Kind Regards Morten
Hi Антон Талерчик Thank you so much for writing to us, and for following us on UA-cam 🙏 we will of course make a video about this in the future, thank you so much for that suggestion. Take care of yourself Kind Regards Morten
Hi sir thanks for ur wonderful and informative videos. I have question How to measure distances for noon to noon report. And do fmd furuno 3100 have a jump to a location feature for route planning that is starting your route plan to dep. Port and jumping to arrival port immedietely? Thanks in advance and God bless you sir
Hi Marc Thank you so much for watching our videos, and thank you for those great questions. Could you please write to me on mbs@furuno.dk. with your questions then i will explain you, since it is a litle bit longer explanation. Take care and have a great day Kind regards Morten
Hello, iam using 2 Furuno FMD-3200 ECDIS units. I can't import, export, make new, delete or save route. Everytime I do one of mentioned activities i get message saying: ''NG data exists, the restore processing is required.'' Any suggestions what to? Thanks
Hi Rini Thank you so much for writing to us. and so great that you follow us on youtube. Thank you 🙏 Can you please send me a screenshot of the whole display with the alert on fmt@furuno.dk, thanks take care of yourself and have a great day Kind regards Morten
Hi JaeWon Sorry for the late reply, and thank you so much for watching our videos. And of course we will make a video about this. If you have more suggestions, please let us know we really appreciate it. Take care of yourself and have a great day Kind regards Morten
Good day sir, i have question in my furuno ecdis have an alert 390 NAVTEX COM ERROR, and i check Navtex Receiver the Status Not Connected. How to find and resolve this error. Waiting your response and Thank you in advance.
Hi Michael Thanks for writing to us with your question, That is really great of you. It means that the signal from your NAVTEX was lost for more than the set period at installation. Try to check the cabling from the Navtex to the ECDIS, maby switch off the NAVTEX and start it up again. If the error persists, then you need a technician on board to check it Take care of yourself Kind Regards Morten.
Hi Chief Thank you so much for writing to us and for watching our videos, that is really great of you. Sorry for the late reply. You can find a kind of logbook in the voyagelog Take care of yourself, and if you any questions or suggestions please tell us have a great day Kind Regards Morten
Hi Thank you so much for writing to us and sorry for the late reply. To answer your question. To change your length of your ship in the ECDIS, you need a FURUNO authorized technician to do so. I hope my answer could help you. Take care of yourself, and have a great day Kind regards Morten
Hi my Max ROT is set to 30°which is way to small. This doesn't allow me to make passage planning in narrow areas where sharp corners are needed to make. I went to parameters setting and I can't change it there. Can it be set higher without technician coming on board?
hello sir Please can u explain how to fix the leg distance error in fmd 3100. Error:- e.g- Leg bearing & distance from wpt1 to wpt2 is 000deg & 4nm, than it suppose to be displayed on wpt1 but the distance of wpt1 to wpt2 is displayed under wpt2 as bearing on wpt2. Thanx & Regards
Hi Sir Thank you so much for writing to us with that issue. Could i ask of you to send a screenshot with the explanation of the problem to fmt@furuno.dk. Thank you so much. Take care and have a great day 😊🙏
Hi Fahad Thank you so much for writing to us, and for watching our videos, that is great 🙏 If you have not saved the route will not stay in the route library. there is no auto save function on this ECDIS. If you have more questions please write to us, we love to have them, or if you have suggestions to future youtube videos please share them with us. Take care of yourself Kind Regards Morten
You are doing a good job! I'm waiting for the next video 🌍
Hi Captain xoulio
Thank you so much for the great feedback, we will come with more videos. Any suggestions?
Take care of yourself
Kind Regards
Morten
Thank you sir, that was really helpful
Sir good day,
How can i access the Monitor and the Fan running hours. Thanks
You are not declare what’s going on with scenario that our furuno ecdis support Filtering function. That means taking data after comparison of both sensors . In case that we lost the one , filtering automatically taking data from gps2 for example or we must change the priority from ECD/FILT to GPS2?
Hi Morten. Thank you for your videos. I have a NAVTEX connected to my Furuno ECDIS. Is there any possibility to transfer positions from NAVTEX msg to user chart or to manual update?
Hi Nick Kushnarov
Sorry for the late reply Nick. First of all then i am really happy that you are watching our videos. Great question you have written to us. 😊
No you have to write them down manually and enter them manually in the Manual update or User chart. But it could be a great feature, i will suggest this to my bosses, thank for the idea💪
Take care of yourself and have a great day
Kind Regards
Morten
@@furunomaritimetraining Hi Morten. Thanks for your reply. You are doing a very helpful job. By
Hi Sir, How to switch on Dead Reckoning on FURUNO FMD?
Hello,good job! Can you show how do synchronization between ecdis?
Hi Антон Талерчик
Thank you so much for writing to us, and for following us on UA-cam 🙏
we will of course make a video about this in the future, thank you so much for that suggestion.
Take care of yourself
Kind Regards
Morten
Hi sir thanks for ur wonderful and informative videos. I have question
How to measure distances for noon to noon report. And do fmd furuno 3100 have a jump to a location feature for route planning that is starting your route plan to dep. Port and jumping to arrival port immedietely? Thanks in advance and God bless you sir
Hi Marc
Thank you so much for watching our videos, and thank you for those great questions.
Could you please write to me on mbs@furuno.dk. with your questions then i will explain you, since it is a litle bit longer explanation.
Take care and have a great day
Kind regards
Morten
Sir, wht might be the reason playback took too much time to play
Hello, iam using 2 Furuno FMD-3200 ECDIS units. I can't import, export, make new, delete or save route. Everytime I do one of mentioned activities i get message saying: ''NG data exists, the restore processing is required.''
Any suggestions what to?
Thanks
Hi Rini
Thank you so much for writing to us. and so great that you follow us on youtube. Thank you 🙏
Can you please send me a screenshot of the whole display with the alert on fmt@furuno.dk, thanks
take care of yourself and have a great day
Kind regards
Morten
Hello Sir!!
can you make video what to do on ecdis when we are in anchoring
Hi JaeWon
Sorry for the late reply, and thank you so much for watching our videos.
And of course we will make a video about this. If you have more suggestions, please let us know
we really appreciate it.
Take care of yourself and have a great day
Kind regards
Morten
In case of Sensor Failure -GPS,GYRO,SPEED..
From where and how to enter data Manually???
Good day sir, i have question in my furuno ecdis have an alert 390 NAVTEX COM ERROR, and i check Navtex Receiver the Status Not Connected. How to find and resolve this error. Waiting your response and Thank you in advance.
Hi Michael
Thanks for writing to us with your question, That is really great of you.
It means that the signal from your NAVTEX was lost for more than the set period at installation. Try to check the cabling from the Navtex to the ECDIS, maby switch off the NAVTEX and start it up again. If the error persists, then you need a technician on board to check it
Take care of yourself
Kind Regards
Morten.
Sir good day. I cannot save the route which I made in my Ecdis no.1 but in ecdis no.2 is ok I can save.what is the problem on this?thanks
What is OTR sir?
Hi
I dont know, where did you get it from?
Brgds
Furuno Maritime Training
Hallo sir,
I have question sir about ecdis furuno, how to find the log book on ecdis?
Thanks in advance sir🙏
Hi Chief
Thank you so much for writing to us and for watching our videos, that is really great of you.
Sorry for the late reply. You can find a kind of logbook in the voyagelog
Take care of yourself, and if you any questions or suggestions please tell us
have a great day
Kind Regards
Morten
How i can change lenght of my ship at furuno acdis
Hi
Thank you so much for writing to us and sorry for the late reply.
To answer your question.
To change your length of your ship in the ECDIS, you need a FURUNO authorized technician to do so.
I hope my answer could help you.
Take care of yourself, and have a great day
Kind regards
Morten
Hi my Max ROT is set to 30°which is way to small. This doesn't allow me to make passage planning in narrow areas where sharp corners are needed to make. I went to parameters setting and I can't change it there. Can it be set higher without technician coming on board?
Dear C1P1
Thank you so much for writing to us
No i am afraid not.
Take care
Kind regards
Morten
@@furunomaritimetraining thanks Morten.
I have problem with aio, servicer come on ship reinstal sistem but problem stay yet
hello sir
Please can u explain how to fix the leg distance error in fmd 3100.
Error:- e.g- Leg bearing & distance from wpt1 to wpt2 is 000deg & 4nm, than it suppose to be displayed on wpt1 but the distance of wpt1 to wpt2 is displayed under wpt2 as bearing on wpt2.
Thanx & Regards
Hi Sir
Thank you so much for writing to us with that issue. Could i ask of you to send a screenshot with the explanation of the problem to fmt@furuno.dk. Thank you so much.
Take care and have a great day 😊🙏
@@furunomaritimetraining i have already sent you the issue by email but didn't got any rply, i ll send again
Hello sir my heading are error in our ecdis how make it green again
How can ı change furuno ecdis date. I cant change to date. This show now 20.03.2003 . How can ı fix this
If you no save route How to find last route
Hi Fahad
Thank you so much for writing to us, and for watching our videos, that is great 🙏
If you have not saved the route will not stay in the route library. there is no auto save function on this ECDIS.
If you have more questions please write to us, we love to have them, or if you have suggestions to future youtube videos please share them with us.
Take care of yourself
Kind Regards
Morten
@@furunomaritimetraining think you l watch all videos think you more