Carbon Fiber Filament - IS IT REALLY THAT USEFUL?!
Вставка
- Опубліковано 2 жов 2024
- Carbon fiber filament is formed of carbon fibers, which are mixed with a thermoplastic referred to as the base material. There are plenty of various filaments that can be bought with carbon fiber parts including PETG, PLA, ABS, and Nylon filament.
These fibers alone are extremely strong, and after we mix them with the base material we cause the filament to increase in stiffness and strength, and also reduce its overall weight.
Read more about Carbon Fiber in our BLOG: www.azurefilm....
PET Carbon Fiber: www.azurefilm....
PAHT Carbon Fiber: www.azurefilm....
3D Printer used: www.azurefilm....
If you enjoy the videos, please support us with a Like and Subscribe, it helps us create more videos. 😊❤️
Check our other videos!
AzureFilm 3D Filament Production
• AzureFilm 3D Filament ...
New Silk 3D Filament Collection - 8 NEW COLORS
• New Silk 3D Filament C...
Flashforge Creator 3 - Unboxing and Setup
• Flashforge Creator 3 -...
How Strong is it? - AzureFilm PLA Strongman
• How Strong is it? - Az...
How to Load 3D Filament and Prevent Tangles
• How to Load 3D Filamen...
Allmylinks: allmylinks.com...
#azurefilm #carbonfiberfilament #3dprinting
Absolute stunning stuff, I also use it for demanding tasks on my 3D printer 👍
awesome, could i print with this carbon fiber on bambu p1p printer?
yes ofcorse, prints beautiful 😄
But Its weak because layers cool Down too quicky And do not bond properly
Very cool!
thank you!
Hi , Can I use the bambulab x1 carbon printer with that filament? :D
Ofcourse, just make sure your nozzle is abrasion resistant and hardened. :)
0:29 is there a recommended temperature for printing inside the enclosure? (PA CF)
You used carbon fiber PETG for the motorcycle exhaust cap? Or nylon?
It's our Carbon Fiber filament :)
What a bot's respond😂
printed end cap for exhaust from PETG-CF? it will melt quite fast. Usually for PETG or PETG-CF filaments the max heat rezistance its between 70⁰C-90⁰C. Definitely wont work as a exhaust end cap. Not even PA-CF whould withstand for this purpose. There is a reason why the original parts or OEM are made from Titanium or Carbon Fiber.
This isn't cf-PETG. It's cf-PET
How large are the chopped carbon fiber particles? Really interested in this material, but concerned about the hazard of inhalation of carbon fiber particles
Shouldn’t the fibers remain suspended in the filament? Maybe wear a mask if you are planning on breaking anything for testing. This is a good question and one I have not yet considered.
Carbon fiber is VERY dangerous when cut or sanded so please don’t take any risks with it, print outside
Test the board with CF
How long is it work? Is it possible to use it for runners to intake manifold?
Hi! We did not test it so we cannot give you a good answer.
Non vedo l’ora di provarlo🔝
grazie mille!
this video says nothing. It's a waste of time
It says exatly one thing: they are liars