Build An Amazing Motorbike 200cc From Damaged Car Wheels
Вставка
- Опубліковано 3 кві 2023
- Dear Everybody,
Today I would like to introduce How to Build An Amazing Motorbike 200cc From Damaged Car Wheel.
I hope you feel interested in my video.
Please like, share and subscribe my channel to see more videos.
Thank you so much!
Fawa Bros.
#fawabros #motorbike #motorcycle
I really appreciate the creativity in the introduction of the video and the creation of the bike, these wheels having their new opportunity to do what they were made for.Congratulations!
ОргСТЕКЛО в колёса - СУПЕР - Лайк:))))💪💪
Thanks!
That turned out great overall my man! And while yes the plexiglass looks cool in the wheels, feel like if you hit something hard or go over something like rough-terrain it's just going to shatter on you. Might want to consider redoing those with some steel. But great job either way!
Estachingon
Amazing how easy you make it look! I really enjoyed your video, well done.
My only suggestion is to make sure your wheels are centered properly and balanced, if they aren’t it can lead to a pretty drastic speed drop. Otherwise great job!!
Pienso lo mismo 😎
When he first startet the engine and showed the rear tire spinning you can easily tell that it's not centered nit even close😂
I wouldn't like to go fast on this wheels
За каждым кустом колеса подшипники звёздочки ,кайф
Flase.
@@leandrolopez4113 это
завод,,!
This is one interesting video Fawa Bros. I do believe that i will be making me one this coming winter. Thanks for the idea fellas. I will owe you one for sure.
Love you design guys! Keep up the great work.😎👍
Thank you so much!
I am really impressed, it turned out fantastic, brilliant, congratulations, big hugs from the Brazilian brothers. Thanks for sharing
I think it’s hilarious how he makes it look like he’s just eye-balling “center“ for concentricity. Haha
He clearly was
At the ~19:24 mark you can see that the wheels are visibly not concentric between the axle and the rim
Я так и понял, что одних колёс не достаточно😂
плюс руки и голова
Be interesting to see how how long does Wheels last maybe you can give us an update
До лайков на Ютубе доедут 😁
Всё круто и качественно сварено ,меня смущают вставки в диски из оргстекла ,а так супер👍
Да,2 тела по 110 кг,+ рюкзак килограмм 10 , и моменто морэ....
@@user-xu1eq5jj5f .. ещё и на глаз видно, что диски эти даже не отцентровали, представляю как на скорости на гладкой дороге оно классно вибрирует ))
Отличная работа . Но на мой взгляд есть два слабых места у этой конструкции . Первое глушитель будет от вибрации постоянно рвать в разных местах второе крепление оргстекла винтами напрямую к ступице без приставочной шайбы . А так неплохой получился байк . Удачи вам
Действительно два слабых места: голова "конструктора" и его руки
Конь срукция тупо ради видео ) Даже пришлось исключить демонстрацию натуральной скорости,на которой безопасно на ней передвигаться )))
Точно,надо было установить резиновые демпферы в отверстия оргстекла.
Guys one hell of a machinist, I like watching a pro at work
Thank you so much!
Эх было бы из чего и деньги я с удовольствием собрал но чуть по другому а так огонь🔥 мотоцикл 🏍🏍💥💥😎👍
Бесподобно, шедеврально, аплодисменты!!! Полёт фантазии на высшем уровне !!!! Зачёт .
Согласен а ты заметил биение заднего колеса 😂
Всё бы ничего, но до реальности очень далеко, когда используешь поликарбонат.🤣
@@sergungunser4490 надо было в 2 листа делать для жесткости
Acrylic is a nice plastic, but polycarbonate or lexan is more durable, and won't shatter when cut or drilled. I think it gives those wheels a nice look.
Thanks for your opinions!
@@fawabros could you publish designs of your creations please?
Акрил довольно крепкий, но крепление этого диска не лишено недостатков.
Hey, they make this stuff called oil. If you use it when you drill metal, your bits will last a lot longer. It also keeps you from screwing up threads when you’re running a tap in. No loctite, no lock washers and they make these things called torque wrenches too.
These are type of people corporations hate!😅
Pretty cool bike and I have to agree, the wheels were slightly off centre but great looking bike
I arrived at it by watching UA-cam about making things. very impressive.
Thank you!
@@fawabros could you publish designs of your creations please?
Невероятно надежные колеса...
ага. плюс отсутствие амортов (поджопный не в счет),
и размер тормозных дисков, прям так и веет надежностью.
Now that's a cool build.
I would be adding lock washers with those nuts and bolts.
Thanks for your advise!
@@fawabros could you publish designs of your creations please?
Muito bom, excelente projeto e magnifica construção, fez parecer fácil, mesmo diante de tanta complexidade. Parabéns.
Thanks!
Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself, be safe🇨🇦
Thanks!
@@fawabros could you publish designs of your creations please?
The mind human is awesome! 👏🏻👏🏻👏🏻👏🏻👏🏻
Thanks!
Thank you for knowledge SIR you are great very good idea sar you are really great
Hare Krishna Hari bol
Thanks!
Sangat profesional cara buatnya terima kasih sharing nya 👍🇲🇾
Welcomed!
Interesting build, I also like how you used the seat as suspension 😄
I know others have mentioned how the wheels are off center and I agree, they need to be centered with better precision to make the ride a little less bumpy and possibly improve steering, possibly with a lathe if you own one.
The locking nuts someone mentioned are a good idea, though you could also use split pins.
While the above were small things of not, I note two things I wasn't a fan of:
The first was your using countersunk screws to secure the wheels to the hubs, I believe bolts with washers to secure them in place are less likely to wear through the plastic or rip them out
Lastly, I am slightly concerned about the front suspension since I believe the way it levers forward when you hit a bump or when the vehicle us under additional stress.
So, if standard motorbike suspension is not an option, I suggest you look up brampton forks which use a form of pantograph frame to keep the wheel in line, then try fabricating your own version 😉
Niggles aside, I found the build quite entertaining and plan to view more in the future
В целом согласен. Просто вся конструкция довольно сырая и недолговечная.
😊
Видео, ради видео))) Красивый макет.
Sangat bagus, saya suka sekali. Cara kerjanya..
Thank you!
Молодец ,руки от куда надо растут.
Яхшы Матай жиеп алдын Син молодец!!!Вот бу мотай ичмасам
what a great creation. not sure i would trust the plastic in the wheels but they sure look great.
Buena idea amigo vale la pena poder fabricar en casa y disfrutarlo adelante Arg
Почему я пересмотрю Зелёный слоник? Элементарно от того, что идеи фильма, в быту, намного безопаснее.
Overall loved the creativity of this whole project, Only thing not worthy was the plexy-glass centers on the wheels. Overall a really cool build.
I agree. That plexiglass seems really questionable in the place of mags or spokes.
Было уже такое: солдат кашу из топора варил.
Very good inspiration for EU law.... Special plexiwheels.... What about the extremly vibrating chain?
That's so cool ! Awesome job on the build !
Thank bro so much!
@@fawabros could you publish designs of your creations please?
Пластик по центру колёс порвёт, и авария неминуема
Nyimak bang n Kren bang inovatifnya...
You can make it like this.
Yes im like it.. Tanks you
Колесо 🥚яйцом😊👍
GOSTEI MUITO DESTA SUA INVENÇÃO...E CREIO SER BEM ECONÔMICA MOTOCRIADA ..PARABENS AMIGO ..JAÚ SP.BRASIL 😊
Thank you so much!
@@fawabros could you publish designs of your creations please?
MINHA GRATIDÃO ...GRACIAS ...PELA ATENÇÃO ..
Я бы на этом ездить не стал. 😂 А так идея классная
На этом ехать только по одной дороге - как пела группа Крематорий, как можно ближе к дому вечного сна. Ска, акрил на ступицы... Это что ж они покурили?
アクリル板って、ピンポイントで力が掛かるとすぐヒビが入るから、大して走らないうちにボルト周りがヒビだらけになっただろうね。
まぁ、ネタ動画だろう。
実際にはアルミ板に交換して乗ってるんだろうな。
guys; great build. 2 quick thing that would make it safer for you. I would add a second hub and rim mounting plate to give the swrews and bolts to bite into. I also would use lock washers and blue locktight to keep them where they are supposed to. it would make it a lot safer.
El tambor de acrílico se va romper en los baches y sobresaltos. Tratar con más cariño😊 lindo proyecto de lujo
It's nice and it's a beautiful object but it is very dangerous. Plexiglass for the wheel is not a good idea. Ok for 45 kg but not for 94 kg like me. But bravo for the work.
Uu wooow amazing 👍👍👍👍
Thanks!
@@fawabros could you publish designs of your creations please?
Ручная разметка колеса - супер
Есть 2 момента которые могут стать смертельными при катании на этом байке молчу уже про тормозные диски из сыромятины сделаные в гаражных условиях без точной шороховатости , 1 от чего я был в шоке это приваривание каленого подшипника к сыромятине а на секундочку у них на этом шве заднее колесо держится сломать такой шов можно просто стукнув по нему молотком слегка или наехав на крупную кочку ,2 момент длина цепи и способ ее натяжения при помощи колхоза с подшипником я так понимаю в любой непонятной ситуации присри подшипник такой натяжитель цепи если и не сломается сразу так точно ушатает цепь в хлам а если его еще и закусит то эта цепь может просто убить вас в общем байк самоубийцы вышел
Да у них что не поделка, то подделка под транспортное средство, причем убийственная, в полном смысле этого слова! 🤣 Каждый раз собирают какую-то жёлто-красно-оранжевую дичь, на которой не то что ездить, даже трогать опасно, рискуя развалить этот «конструктор» от лёгкого толчка на кочке и даже просто на «ЭТО» присесть! У них в подписчиках видимо только всё население этого городка и его пригородов, где они живут, потому что подписаться на этот бред можно только в пьяном угаре, закусив забродившим рисом! 👍😁🤪
Hello Fawa Bros beautifully made good job well done
Thanks!
@@fawabros could you publish designs of your creations please?
Que ótimo projeto gostei muito, tenho um motor AP 4 cilindros e quero fazer um projeto legal também.
Valeu amigão parabéns 👏👏👏
Thanks. You should make it!
@@fawabros could you publish designs of your creations please?
Красиво выполненно и не более.
quedo excelente ese proyecto para una buena rodada
Thank you!
@@fawabros could you publish designs of your creations please?
Çok mükemmel bir, çalışma eline, emeğine sağlık.🇹🇷👍
Thank you so much!
@@fawabros Teşekkür.👏❤️
@@fawabros could you publish designs of your creations please?
Sensacional como sempre
Thanks!
@@fawabros could you publish designs of your creations please?
Человек, человечек, ты аккуратно качественно собираешь и идеи интересные, но ведь конструкция - это страшный сон человека, который хоть немного в этом понимает!
Ну найди ты человека, который ходь немного в этом разбирается, чтобы он на недостатки конструкции указывал.
Saya setuju dengan anda, malah bukan sahaja dari aspek rekabentuk sahaja, tetapi juga dari segi pemasangan juga perlu banyak penambahbaikan, contohnya pemasangan 'bearing' pada hub roda 😅perlu diteliti semula kerana ada kekurangnya disitu...Dan juga pada teknik memasang klip kekunci sambungan rantai juga adalah salah arah. saya percaya ini hanyalah sekadar 'content' untuk hiburan, bukan sebagai iklan yang menunjukkan bahawa produk ini mampu di produksi bagi tujuan komersial..produk ini masih jauh jaraknya untuk mencapai tahap keselamatan yg selamat untuk penggunanya...
@@anordgarage4818 ясное дело, что чисто видео снять и забыть, но ведь можно хоть немного грамотнее подходить к делу, вдруг кто что-то захочет повторить.
Admittedly the concept and design are quite feasible, but the actual construction might leave a few things to be desired.
First are those plastic centre wheels. If that material is acrylic or Plexiglas it will crack and fail under load as both are prone to cracking. It might work is you used polycarbonate but even them there is a design flaw. You need to put bushings between the bolt and the plastic and the bushing length must be identical to the plastic thickness.. If you just bolt it on as shown here the wheels will crack from the holes out. In any event those wheels can also fail because the loading on them will cause the bolt heads to wear against the plastic causing them to loosen off. Once loose, the bolt heads will start to chew up the surface of the plastic and weaken it and create notches which will allow cracks to start forming
Second, the accuracy of the hub parts is almost nonexistent. Every flange on those hubs must be concentric to one another and parallel to one another. There are more than a few instances where you can see that this is not the case which will cause pulsing on the brakes and accelerated wear on the chain. Regarding the chain, you have installed the master link clip backwards.
Third, the exhaust pipe will last literally miles before it rips the studs out of the engine cylinder head. The assembly is fairly heavy and you need to put secondary supports on it to prevent point loading on the head studs.
Fourth, the use of car tires on a motorcycle is called dark siding and it will work if properly done. I have dark sided for a number of years on my touring bike and had no problems. The trick is to select the right tire. You need a run flat tire meant for winter service. If you use just a regular car tire the sidewall flex will be too great and you can walk the tire right off the bead on the rim. Summer or all season radials are not sticky enough to give you a good grip on the road. Winter tires are made with softer rubber compounds that will provide the grip you need.
Fifth, you might want to put some more gusseting where the rear suspension attaches to the main frame. You have 90 degree angles there that will act as stress risers and it might be prone to cracking and failure.
I have ridden and built bikes for over 50 years so I have accumulated a fair degree of knowledge on what will and will not work. Unlike cars, a very simple mistake can cost you your life.
Btw,where are you from.?
Will you built a adult go kart or bike like this for me.?
You forgot to mention the interesting front "Suspension"........ Mind you, I'm wondering how pivoting the wheel to move forwards and back can actually be called suspension ? It's more like variable geometry and wheelbase that allows the wheel to tuck back and remove trail (or caster) when braking. It must be fun when breaking mid corner. :D
It's a shame really, because it would almost have been easier for them to make a funky single sided "Springer" style fork leg with the bits they had.
Ide cigan na bicykli a zbada na ceste zips a hovori: Dik More zips. Este rifle a som frajer. 😂
Krasne spravene aj natocene👍👍👍
Интересное видео. Но с точки зрения безопасности этот мотоцикл далеко не уедет. К тому же давать нагрузку надо на пустую гладкую часть болта, а не на его резьбу! А в остальном довольно прикольно 👍
I wish i can have this i like it and it will help me saves a lot to my dailies
Muito bom
Well done! I know you make a lot of yellow-red-style machines, can you make a Harley Davis style motorcycle? Looking forward to this video.
Нашёл снаряд решил танк построить😊
Молодец 👍
plastic wheels will break quickly, you need to make a hole out of metal in the center of the kuga and then grind the outer diameter on a lathe so it will be strong and smooth.
Thanks for your opinions!
@@fawabros could you publish designs of your creations please?
Что такое стапель, угломер, делитель, балансировка, Гровер.....? Да нафиг надо.
Надеюсь, автор понимает , что на этом ездить не только неудобно, но и опасно.
Я не стал бы доверять свою жизнь колесам сделанным из акрила.
Supper.....Bike .
Good Work ❤❤❤
Excelente trabalho, mas o acrílico que segura as rodas, não aguenta por muito tempo o giro dos pneus e o peso da moto, Vai quebrar logo.
Superb build
Thanks!
@@fawabros could you publish designs of your creations please?
Some great and very unconventional ideas in this build. Conventional ideas in motorcycling however are born from decades and decades of people being killed by bad ideas.
Просто молодец!
Why can't you use metal for where you put transparent plastic?
I think that it's for aesthetical reason...
Канечно ведь так легко найти двс и все остальное... а вот колеса самое трудное
esta muy buena pero hay cosas que cambiar y mejorar me gusto mucho la verdad
i love your work
Thanks!
Great job... Pls make it electric next time
Thanks for your suggestion!
Класс!!!Лайк однозначно!!!
สุดยอดเลยครับ
Thanks!
колеса конечно сомнительные. Но выглядит красиво
❤ Молодец 🎉класс😊
Thanks!
шпонка ступицы - огонь
Kerennn..goog job .
Thanks!
И размер деталей и гиометрию мотоцикла он знает? Движок он тоже в кустах нашел или уже припасеный был?🤔😂
Super! like this. 😀👍
Thanks!
First it was the classic walk and stumble on some street rubbish now kick ball and stumble upon some rims haha
Industrious and nice-looking build, but those wheels are seriously off-center. You need a better procedure for cutting those hubs with greater precision.
My exact thoughts
The front suspension is sketchy as well, it varies massively during its travel.
I wouldn't want to hit a bump at speed.
Don't use everytime broo
Phá quá brother
Thanks!
Wow ang ganda
Thanks!
"BRUTAL" Que lo disfruta... Pa-Lante...
엔진을 앞바퀴쪽에있어야 자연공냉이 잘된다,,!저런식으로 엔진이 뒤에있으면 겨울에는 따뜻해서좋으나 여름에는 알이익을수도있다,,,,
Found a car rim and built a motorcycle with it. Few weeks ago, I found an old sugar container and with it I build a sugar production plant...
bravo pour votre idée ❤
Thank you!
The copper washers go on each side of the banjo nuts 17:17, cool build nice bike.
Советую переделать крепление переднего суппорта и спустить его ниже так как площадь примыкания тормозных колодок мала, когда сделаете как я говорю торможение будет намного эффективнее
Ага, и на шиномонтажку заехать, а то диски бьют... )))))))))))))))))))))))))))) 19:28
@@sawnyone боюсь на шиномонтажке будут бессильны
Круто👍
I smoke those clutches every time. Build one with a torque converter setup.