Couldn't agree more. I've used a lot of this stuff. As you say, for folks who aren't ready for a full 9H coating, CanCoat is a terrific option. Easy to work with; very good durability, and a nice pop on white/silver/grey. With a burnish, killer gloss on red/black. It's self-cleaning abilities are also pretty impressive for this sort of product. I like it a lot, obviously. Edit: I want to add a few words about Gyeon. Had some questions about the product first time I used it and shot a quick note to Gyeon on Facebook - most convenient at the time. They got back to me within a half hour with a detailed response. Can't ask for more. Microfibertech/Autofiber is similarly costumer-driven, IME. Excellent companies to work with.
I’m getting more than 12 months out of this so far. Rather than use the sprayer, I cut a small piece of microfibre towel (2”x3”) and wet it direct from the bottle, apply and buff. No issues with smearing or high spots.
This is great, thanks Brian. I like how you incorporated waterless wash, as there are many people out there that want to keep their cars clean but have no water hose for a proper wash. On the flip-side, I've been looking for something that is easy to apply as Bead maker, but that does not need to be applied after every wash. So Gyeon Can Coat + Gyeon Cure is something I will definitely consider going forward.
That is a really Great product! Amazing beading and Good durability. There is one thing I find rather difficult with the Can Coat. It feels sticky When Buffing it off with a Microfiber Towel. Something I’m doing wrong? I add just 2-3 sprays pr. panel, sprays directly into a Microfiber applicator, spread it out with the pad in 2 directions/overlapping motions and buff it off after 10-15 seconds. I always use 2 Towels When Buffing. One for Removing most of the «leftover» and one for the Perfect shine.
I've been very impressed with CanCoat so far. It's held up very well over a very brutal winter here. Two coats and still beading strong everywhere but lower portion of door panels which are sheeting very fast still.
Hey Brian did you ever get the gloss numbers on the can coat? I'm thinking about using it as a base layer and poly seal for top coat to get near 99 gloss units
Been using it scince it first came to UK(v1 was in an airosol). Easy ish to apply. Lasts for years if do two coats. Also good on flat white or red paint if there's no scope for correction.
I’ve gotten about 12 months of crazy beading from can coat. I live in So Cal, so mostly warm and dry here, YMMV in other areas. Can coat is in a class by itself. Way more substantial than a typical SiO2 spray topper product, and easier to use than a full on liquid coating. Plus you can reapply it over itself after a few months without polishing surface clean again like you would have to with a true coating. Adding Gyeon Cure cut 1:1 with distilled water makes it pop even more and makes surface insanely slick.
Great video Brian! If I did not have so many products this and Moonlight is in consideration. I have not used it yet but have bought a chemical resistant clay towel that you combo with either an iron remover like Gyeon Iron or if a more dirty panel with no loose dirt but imbedded contaminants Sonax Glass Cleaner. Gyeon clays is compatible with their iron remover Iron and also Britemax BDX and their clay is an option. What do you think of the use of both clay and iron remover before correction to save a step? I would use a tar remover first after a wash and then the clay and iron remover combo.
Hi Brian, great informative video. When it comes time to re-apply the Gyeon Can Coat, is it required to remove it such as compounding / polishing it off, or can the vehicle be wiped down with Prep/IPA and applied once again.
Hi Brian. Another great review. I wonder how it compares to the Meguiars fast finish ? When I bought it, I paid about £20 (not sure what that is in $) but it's up to 40 quid now. I use it on a black Range Rover Sport, and it really popped. Look forward to the next one. Kev KP Daly Automotive UK
Great Vid Brian! Question! I have a Polaris Slingshot which has no top, or sides really. It has painted, and non painted black plastic interior parts. Would it be good to wipe all these areas down with this product for protection during rain, and riding in the sun? If so how should I clean the 303 protectant off I have now, before applying this? Thanks.
Wondering if this will adhere to like after a Carnauba application on the vehicle and still last 3-6 months, same question for the Griots Garage Ceramic 3 in 1 Wax. Or what if you apply any of the 2 previously mentioned products and then top it off with another wax, is any of these possible??? Thanks for the video!!
Hello Sir, my son just bought a new car. I have the newer version of can coat. I live in Chicago, and it's 30 degrees. Do you recommend applying this product in this weather? Thank you in advance. Love your channel, I've learned so much.
Can i still apply a second coat of gyeon one even if its been 6 hours after the first coat? (Car was kept in garage during the whole time after the first coat was applied, also I did not apply any other products after the first coat)
I'm just starting out been doing some washing and waxing little bit of paint enhancement for friends and family but I've been asked about ceramic coating and I'm not as familiar with them but I was thinking of using can coat but not sure what to charge for my time what would you recommend as far as pricing
If its bad for your lungs its bad for your dogs lungs.Sorry I’m just a huge dog fan their such amazing animals but you already know that. This looks like an awesome product. I’m torn between this and a ceramic coat. I think 6 months is very reasonable for protection. Looks like it applies as easily as a ceramic coating.
Not a good sign when you have to wear a resperator so you don't inhale chemicals used as a sealant. Ive kind of stop using ultimate fast finish because of that :(
I’m in need of a bit of advice. I have a 15” dual action polisher and have rupes yellow pads and scholl s20. I want to do a one step on my Audi s4 2004. I’ve used the setup above on my Ford Fiesta mk6 2005 and it was struggling to cut enough and had to do multiple passes to remove swirls. What pad would you recommend using with the s20 ? I know it’s a broad spectrum but in general what would the paint hardness be like ?
@@apexdetail85 Would these finish down well enough too ? If so i have a 5" polisher and a 3" too, how many pads do you think I'd need to get round the coupe if I'm brushing them out after each pass ?
Can you layer it and would it be any good I love this product more than the full ceramic just because you can top it off every 4 months and it pops like a Candypopper and in between I use the engima shampoo and from Time to time some wetcoat and my care keeps in Showcare status after every wash
@@apexdetail85 thanks for that, I wasnt 100% sure. I look forward to trying can coat out this summer, I will be ceramic coating my car so can hopefully use it as a topper!
Would you say then it’s more effective than than the spray coatings like CMX, Meguiers, or DPC spray? I’m trying in my ineffectual way to make a mental note of its placing in the array of SI02 products.
More like a year+ with basic maintenance. Also the bottle is good for 6-8 coats/cars and has a longer opened shelf life (1-2 years) than something like cquartz lite (
One thing to note: Gyeon typically is very conservative on their coating lifetime estimations. MOHS, Skin, synchro are all underrated on lifetime. I have CanCoat on a panel of my vehicle as my daily is a test mule for customer offered coatings I install, it’s been 7 months now, And I have stretched the coating lifetime, with stuff as simple as WetCoat and Cure along side proper maintnence. At month 6, I washed my vehicle with Migliorie Citrus wash to strip the toppers from the panels, and after the next wash(1 week without toppers), it still retained its hydrophobic properties. I have also seen WaxModes video of the wet application, and I think you could stretch this entry level coating to well over a year, doing a wet application every 3/4 months after month 8 of the initial coat. Great product in my opinion. It’s actually my money maker in comparison to serious coatings as customers and clients who haven’t ever gotten into a coating are more comfortable with trying it as it’s less costly, easier on me and the results it brings get them to request for a serious standalone coating when the time for that comes to.
Jean Yves Giguere Can coat is more hydrophobic than moonlight although moonlight has about twice as much silica content so it MIGHT translate into a bit longer lifespan than Can Coat. Hope this helps.
I would have to agree probably the only detailing channel on UA-cam that is credible in my opinion. Big 👍 to Brian for the time and effort he puts into the making of his reviews. I'm surprised other so call detailing channels are so popular considering the nothing more than paid adds
Hey Brian! Got a question! We just compound polished an 18 year old Volvo V70 Classic! The clearcoat seems in top condition coz cars been protected by Silver Seal coating ever since new ithink. The problem is car has stand under a tree for a long period & things like resin & branches n stuff have fallen onto the roof causing major dots n scratches all over roof. Im using CarPro's ClearCut. Iv done the roof 1 time with no improvment on scratches. Do you still think i should keep going with ClearCut, or are there any stronger chemicals for removing stuff falling from trees? Im using Wool pads on machine. Any good advices on those tricky hard core situations... ??
@@apexdetail85 Nope havent tried. would you say Sonax CutMax cuts diffrently than ClearCut? Iwas also lookin at your video on Sonax scratch repair kit, but those only hides the scratches right? i assume if u want em gone forever polish is the only way? We were thinking of putting boiling hot water on a small area of roof to just see how the marks reacts. then later filling in with acual original carpaint from Volvo if nothing else would ahhem, Cut it so to speak..
Excellent video and I appreciate your time and effort ✊I need spring weather on Long Island. I need to do my wheels off and change the brake pads to carbon ceramic because the brake dust is unreal. I will do a polish and coat my wheels again and then calipers.
What do you want to Compare Can Coat to in the next video?
Meguiar's Ultimate Fast Finish?
Apex Detail; DPC ARMOR
Ultimate Fast Finish, DPC Armor, Net Shield, and Can Coat
Apex Detail Adams!
Adams Ceramic Spray Coating and Apex Detail
Even when you review a product I probably wouldn't need or buy.. I never miss a video. So many valuable nuggets to take away!😁👍🏻
I am glad these help a bit.
Couldn't agree more. I've used a lot of this stuff. As you say, for folks who aren't ready for a full 9H coating, CanCoat is a terrific option. Easy to work with; very good durability, and a nice pop on white/silver/grey. With a burnish, killer gloss on red/black. It's self-cleaning abilities are also pretty impressive for this sort of product. I like it a lot, obviously.
Edit: I want to add a few words about Gyeon. Had some questions about the product first time I used it and shot a quick note to Gyeon on Facebook - most convenient at the time. They got back to me within a half hour with a detailed response. Can't ask for more. Microfibertech/Autofiber is similarly costumer-driven, IME. Excellent companies to work with.
Great cust service...I love it!!👍👍
I’m getting more than 12 months out of this so far. Rather than use the sprayer, I cut a small piece of microfibre towel (2”x3”) and wet it direct from the bottle, apply and buff. No issues with smearing or high spots.
This is great, thanks Brian. I like how you incorporated waterless wash, as there are many people out there that want to keep their cars clean but have no water hose for a proper wash.
On the flip-side, I've been looking for something that is easy to apply as Bead maker, but that does not need to be applied after every wash. So Gyeon Can Coat + Gyeon Cure is something I will definitely consider going forward.
That is a really Great product! Amazing beading and Good durability. There is one thing I find rather difficult with the Can Coat. It feels sticky When Buffing it off with a Microfiber Towel. Something I’m doing wrong? I add just 2-3 sprays pr. panel, sprays directly into a Microfiber applicator, spread it out with the pad in 2 directions/overlapping motions and buff it off after 10-15 seconds. I always use 2 Towels When Buffing. One for Removing most of the «leftover» and one for the Perfect shine.
Citrol 266 you were the one that introduced me and boy is it a time saver
266 is a BEAST!
Thanks from Brazil.
I've been very impressed with CanCoat so far. It's held up very well over a very brutal winter here. Two coats and still beading strong everywhere but lower portion of door panels which are sheeting very fast still.
Love your doggy!!
Love your videos . Thanks so much for taking the time to show us stuff. Where do you like to get your microfiber s from?
Some from the Rag Company, Some from Luxury Microfiber, Some from Ardex Labs.
I see the furry foreman was keeping an eye on you. Lol. Mine does the same thing.
Yup! lol...Sat and Sun I take her to the shop with me to supervise.
Need to get her a little doggy dust mask
Hi Mr. Brian, great video. Can't wait to see the video on xtreme Solutions Magnum 357. Please have a bless and wonderful weekend.
great video again buddy. I c puppy wants some air time as well.🍻🍻
Yes...she always does!
Topping this with either hyrodslick or Groits 3-1 ceramic spray wax makes your car shine like Soul Glo
Liked the Scott from DPC hand acting impression in the test panel portion of the video.
Really? Noooo...I must take a look at that!😮😂
Hey Brian did you ever get the gloss numbers on the can coat? I'm thinking about using it as a base layer and poly seal for top coat to get near 99 gloss units
As always great review, and I’ve bought products that have been recommended by this guy that I have really been pleased with the results
Carpro reload next compare to geyon can coat
Applied can coat to my wheels today fist time coating application. 🤙
Love how confident you can work with the BOSS 🐶 right there on top of you!! 😁
What type of mask are you using?
When i detail a car. A furry feline supervisor watches me. Aka neighborhood cat
lol...They are great sidekicks!🙂
What about the dogs lungs!
Master applied ...........DOGGY approved!
Been using it scince it first came to UK(v1 was in an airosol).
Easy ish to apply.
Lasts for years if do two coats.
Also good on flat white or red paint if there's no scope for correction.
I’ve gotten about 12 months of crazy beading from can coat. I live in So Cal, so mostly warm and dry here, YMMV in other areas. Can coat is in a class by itself. Way more substantial than a typical SiO2 spray topper product, and easier to use than a full on liquid coating. Plus you can reapply it over itself after a few months without polishing surface clean again like you would have to with a true coating. Adding Gyeon Cure cut 1:1 with distilled water makes it pop even more and makes surface insanely slick.
I lived in orange county it rained allot and is humid and lots of corrosion
Love the dog 💖💖💖
Can you tell the difference between Can Coat and Tac Moonlight? Protection and durability? Thanks 👍 Great video by the way!!!💪
They are so close Throw a dart...which ever it lands on. I guess ...If I had to pick, it would be Moonlight.
Where is the follow up video ????????
Great video Brian! If I did not have so many products this and Moonlight is in consideration.
I have not used it yet but have bought a chemical resistant clay towel that you combo with either an iron remover like Gyeon Iron or if a more dirty panel with no loose dirt but imbedded contaminants Sonax Glass Cleaner. Gyeon clays is compatible with their iron remover Iron and also Britemax BDX and their clay is an option.
What do you think of the use of both clay and iron remover before correction to save a step?
I would use a tar remover first after a wash and then the clay and iron remover combo.
Hi Brian, great informative video. When it comes time to re-apply the Gyeon Can Coat, is it required to remove it such as compounding / polishing it off, or can the vehicle be wiped down with Prep/IPA and applied once again.
Hi Brian. Another great review.
I wonder how it compares to the Meguiars fast finish ? When I bought it, I paid about £20 (not sure what that is in $) but it's up to 40 quid now. I use it on a black Range Rover Sport, and it really popped.
Look forward to the next one.
Kev
KP Daly Automotive UK
What about the face mask fot your Dog?
There is a new sealant in town. Can we get a test of new Chemical Guys HydroCharge Ceramic spray coating?
It hold 4 monts on my focus. ı did not apply topper cure any sealent anything.
Could you explain the difference between can coat and can coat pro ??
I am not very sure if this can be used as interior dressing? (Cockpit, vinly, plastics etc) anyone can help?
Awsome video
May I ask can apply it on a previous coating
Great Vid Brian! Question! I have a Polaris Slingshot which has no top, or sides really. It has painted, and non painted black plastic interior parts. Would it be good to wipe all these areas down with this product for protection during rain, and riding in the sun? If so how should I clean the 303 protectant off I have now, before applying this? Thanks.
Compair it to meguaires fast finish
Do you have to do their primer first, prior to the Can Coat? And no dog lungs were affected during this application? 😁. Thx Brain
Hi Brian ,what is your preference between cancoat and moonlight?
Sooo close...I would say Moonlight.
Moonlight? Tell me more. 😁
TAC Systems Moonlight
Wondering if this will adhere to like after a Carnauba application on the vehicle and still last 3-6 months, same question for the Griots Garage Ceramic 3 in 1 Wax. Or what if you apply any of the 2 previously mentioned products and then top it off with another wax, is any of these possible??? Thanks for the video!!
More testing in the shop bathroom!
hahahaha....ok...will do!!😜
GREAT!!!
How is this compared to hydrosilex?
Try comparing it to a full coating
can this be topped with a paste like black label synergy?
Hello Sir, my son just bought a new car. I have the newer version of can coat. I live in Chicago, and it's 30 degrees. Do you recommend applying this product in this weather? Thank you in advance. Love your channel, I've learned so much.
Honesty…45 degrees or higher is best. Happy New Year!
@apexdetail85 thank you. How about technicians choice? In this weather
@@PorfyD23 same. That goes for most protectants
@@apexdetail85 I will wait till spring. Thank you
Sorry to say but you protect your lungs but what about your dogs not cool sorry to say he was right beside you your best friend
Dogs don't live long so it's ok
Can i still apply a second coat of gyeon one even if its been 6 hours after the first coat? (Car was kept in garage during the whole time after the first coat was applied, also I did not apply any other products after the first coat)
Better than opti seal ?
Yes sir.🙂
I'm just starting out been doing some washing and waxing little bit of paint enhancement for friends and family but I've been asked about ceramic coating and I'm not as familiar with them but I was thinking of using can coat but not sure what to charge for my time what would you recommend as far as pricing
Can i be used on a satin black wing?
What was the gu for can coat
What respirator are you using?
Lol I thought I saw that car my state NC today!!! PA Tag and everything
Wasn't me!😮😂
At that price what would be a better choice Optimum Gloss Coat ($59), Carpro Cquartz UK 3.0 ($55), Crystal Serum Light ($70) or CanCoat ($55)?
Those are nice pick ups. For me the decision factor would be if its friendly user
It would be...but some do not want the hassle of a pro coating.
I have used this and The Last Coat 2, but can't decide which I like best. What do you think?
Well, TLC is much cheaper obviously (dollar per ounce) but from what I have seen Cancoat seems like it lasts longer.
If its bad for your lungs its bad for your dogs lungs.Sorry I’m just a huge dog fan their such amazing animals but you already know that. This looks like an awesome product. I’m torn between this and a ceramic coat. I think 6 months is very reasonable for protection. Looks like it applies as easily as a ceramic coating.
Sir, great video and great info also, this is a product for sure to use in the shop. Can you compare to like Ammo Reflex
Yes and TAC Moonlight.
Apex Detail I’ve just used that TAC window seal, OMG!!!!!! It’s a killer product
Not a good sign when you have to wear a resperator so you don't inhale chemicals used as a sealant. Ive kind of stop using ultimate fast finish because of that :(
It is a good idea to wear one when dealing with any detailing product. A habit I need to get into.
I’m in need of a bit of advice. I have a 15” dual action polisher and have rupes yellow pads and scholl s20. I want to do a one step on my Audi s4 2004. I’ve used the setup above on my Ford Fiesta mk6 2005 and it was struggling to cut enough and had to do multiple passes to remove swirls. What pad would you recommend using with the s20 ? I know it’s a broad spectrum but in general what would the paint hardness be like ?
Lake Country Microfiber cutting pads.
@@apexdetail85 Would these finish down well enough too ? If so i have a 5" polisher and a 3" too, how many pads do you think I'd need to get round the coupe if I'm brushing them out after each pass ?
Nice easy product. If I hadn't already bought some Angelwax ceramic wax and QED I would be trying this. Will wait when I use up the Angelwax :)
Yes...dont hoard the products like I do...just buy what you need and what works for you.
wouldnt the waterless affecgt can coat bonding
They surprisingly work and play well together.
Informative video could you compare it to Polish Angel Cosmic v2 they claim 10 to 14 microns per layer
Very similar in durability...Cosmic and Viking Coat are going to be reviewed within the week.
Wicked ... I got addicted to PA products so easy to work with and amazing results..
When is that hydro blue torture test coming around?
On the list...trying to get to all of them in a timely manner.
Brian use this first an the cure stuff or the other way around I'm at work didn't hear it all
This first...Cure to maintain it.
Can you layer it and would it be any good I love this product more than the full ceramic just because you can top it off every 4 months and it pops like a Candypopper and in between I use the engima shampoo and from Time to time some wetcoat and my care keeps in Showcare status after every wash
Two coats is best.
What kind and where did you get the respirator?
I believe Amazon.
Ugh dog breathing all the fumes
How would this work on a boat/RV?!
Fantastic.
How to clean the thin plastic trim around windows and doors ? All different material plastic too
Isn't paint thickness measured in microns brian?
Microns and Mils.
@@apexdetail85 thanks for that, I wasnt 100% sure. I look forward to trying can coat out this summer, I will be ceramic coating my car so can hopefully use it as a topper!
Please review P&S Beadmaker soon... Love your vids (Y)
ua-cam.com/video/meLJBWFDNu8/v-deo.html
Moonlight
Is this in the same class as CQuartz 3.0 , if so it looks like it can be topped off to extend its useful life and might be easier to apply ?
Not as concentrated. Easier to apply.
Would you say then it’s more effective than than the spray coatings like CMX, Meguiers, or DPC spray? I’m trying in my ineffectual way to make a mental note of its placing in the array of SI02 products.
You could have a dark panel ???🙄🙄🙄
Nope
Plastik leather gummi metal velour stoff stone no problem😅 and youre mask hold not long in youre face 😁 half safty 🌗
$55 for 6 months. Sorry, but no way. There is other products that go around tbat long
More like a year+ with basic maintenance. Also the bottle is good for 6-8 coats/cars and has a longer opened shelf life (1-2 years) than something like cquartz lite (
How come your applicator looked so dirty at the end?
Great video by the way!!
I might have grabbed an older one for another purpose...my mind gets pre occupied while making these vids.
Can DPC Armor be used as a refresher/topper for this?
Good question...I will test to see if they play well together.
What lasts longer Jescar powerlock plus sealant or gyeon can coat coating
One thing to note: Gyeon typically is very conservative on their coating lifetime estimations. MOHS, Skin, synchro are all underrated on lifetime.
I have CanCoat on a panel of my vehicle as my daily is a test mule for customer offered coatings I install, it’s been 7 months now, And I have stretched the coating lifetime, with stuff as simple as WetCoat and Cure along side proper maintnence.
At month 6, I washed my vehicle with Migliorie Citrus wash to strip the toppers from the panels, and after the next wash(1 week without toppers), it still retained its hydrophobic properties.
I have also seen WaxModes video of the wet application, and I think you could stretch this entry level coating to well over a year, doing a wet application every 3/4 months after month 8 of the initial coat.
Great product in my opinion. It’s actually my money maker in comparison to serious coatings as customers and clients who haven’t ever gotten into a coating are more comfortable with trying it as it’s less costly, easier on me and the results it brings get them to request for a serious standalone coating when the time for that comes to.
Indeed...a wonderful alternative.👍
Great video again Brian. I’m already using Moonlighting. Can you compare it to Gyeon Can coat?
Jean Yves Giguere Can coat is more hydrophobic than moonlight although moonlight has about twice as much silica content so it MIGHT translate into a bit longer lifespan than Can Coat. Hope this helps.
They are very close...If I had to...would prob pick Moonlight between the two.
@@groundcontrol6876 totally agree with you - have the 2 items since 1 year - tac moonlight little less beading but durabilty is better
@@groundcontrol6876 bout your dog?
I absolutely love what you provide with this channel I always look forward for the next video
I would have to agree probably the only detailing channel on UA-cam that is credible in my opinion. Big 👍 to Brian for the time and effort he puts into the making of his reviews.
I'm surprised other so call detailing channels are so popular considering the nothing more than paid adds
I am Very happy these videos help you guys and gals a bit. Much more to come.
Can you use reload as a maintenance on top of this instead of Cure?
Enjoy watching ur videos... love ur dog! Wish I can bring mine to work
I bring her Saturday and Sundays....spend the next 2 picking up her toys!😂
I put it on my car black Lexus LS 430 it looks great thank you
i used it first time on my dads car its so easy to work with the paint and plastics the paint just pops 👍
Hey Brian! Got a question! We just compound polished an 18 year old Volvo V70 Classic! The clearcoat seems in top condition coz cars been protected by Silver Seal coating ever since new ithink. The problem is car has stand under a tree for a long period & things like resin & branches n stuff have fallen onto the roof causing major dots n scratches all over roof. Im using CarPro's ClearCut. Iv done the roof 1 time with no improvment on scratches. Do you still think i should keep going with ClearCut, or are there any stronger chemicals for removing stuff falling from trees? Im using Wool pads on machine. Any good advices on those tricky hard core situations... ??
Have you tried. Sonax CutMax, Cut and Finish...or 3D ACA 500 or even 3D AAT501?
@@apexdetail85 Nope havent tried. would you say Sonax CutMax cuts diffrently than ClearCut? Iwas also lookin at your video on Sonax scratch repair kit, but those only hides the scratches right? i assume if u want em gone forever polish is the only way? We were thinking of putting boiling hot water on a small area of roof to just see how the marks reacts. then later filling in with acual original carpaint from Volvo if nothing else would ahhem, Cut it so to speak..
Excellent video and I appreciate your time and effort ✊I need spring weather on Long Island. I need to do my wheels off and change the brake pads to carbon ceramic because the brake dust is unreal. I will do a polish and coat my wheels again and then calipers.
It is soon here my friend ...very soon.🙂
Please please get the dog a mask too!!! 😷
Absolutely!!😷
Look forward to the video on those lights! Great idea!!
Great Video… Gotta but your chops a little tho… Get a cool mask for the pup!
Yeah...gotta custom fit her with one!
Great prep video. Question: does Citrol 266 remove any water spots? Can I use this to remove water spots as well as any chemical water spot remover?
Hi Brian, great video. What in your professional opinion would be glossier, Gyeon CanCoat or TAC Moonlight
Compare it to Carpro Cquartz lite
Would cancoat be a good topper for QP-ON 2.0?