Renault Scenic intermittent Airbag light. Bad pretensioners circuit. Fault finding and repair.

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
How to do wire repairs:
• How do I repair damage...
Hi
This car came to me with an intermittent Airbag light.
The light would come on randomly.
Scanner pointed to the driver side pretensioners circuit, and when I started to touch the loom and plugs under the seat, I was able to replicate the fault.
Watch the video to see how I have repaired this problem...
Hope you enjoy the video.
Any questions please put them below.
Like always, thank you for watching!

[@roelschipper]

Thank you very Michael for the informative video. This solved the same problem on our grand scenic. Kind regards, Roel!

[@LMAutoRepairs]

😊
👍👍👍

[@anthonythorpethorpe1606]

Brilliant exactly the same thing what happened to mine excellent advice thank you

[@LMAutoRepairs]

☺️
👍👍

[@teguhpribadiadinugroho2179]

Hi, really appreciate your video. I have the same problem, intermitten airbag light on, and diagnosed with same errror code. Could you please describe on how to detach the pins from the connector? Thanks

[@LMAutoRepairs]

Hi
I can't remember now from the top of my head... sorry...

[@Rif-1921]

thanks for the video, I have scenic 3 1.5 dci diesel. I have esp turned on in diagnosis, yaw speed sensor comes out I don't know if I change the part, I have to do some configuration with the computer thanks

[@LMAutoRepairs]

Check the readings of the yaw sensor on live data... if is bad, then probably you need a replacement...
Yes, usually they require to be calibrated...
👍👍👍

[@hantverkaren]

Hi, Thanx for this. One question though; Some recommend that one disconnects the battery before playing with the Airbag connector so as not risking the airbag to accidentally trigger. What's your take on this?

[@LMAutoRepairs]

Strongly advisable!
👍👍👍

[@sadikmamoun2847]

it is a pleasure watching your videos

[@LMAutoRepairs]

sadik mamoun
Hi
Thank you for the nice comment, much appreciated!

[@sureshroyala6296]

Hi, Thanks a ton for making this video. Its very useful as I've this problem with Scenic too.
How did you remove the center storage? I have a scenic 05, the storage box in that is fixed to the floor. I don't see anything like that in your car. I could not undo the screw due to the front seats. I believe this needs to be removed first?

[@LMAutoRepairs]

Hi
Yes, if I recall correctly they come off first...
Thank you for watching!

[@henkdej8477]

Hello, very helpful and clear videos. Thank you. From your experience, an advise please. The rear foglight wire runs via the R2 connectors (all dry and clean) to the UCH pin 6. At the R2 I measured only 4,5 volts. Too low to light the bulb. Next step is checking the UCH pin for voltage. The UCH switches the dash symbol on but foglight is off. Is there a relay or fuse invloved somewhere? Thank you, regards Henk NL

[@LMAutoRepairs]

Hi
No... the switching is done by the UCH alone...
If you have that low voltage at the UCH pin, perhaps the unit is failing...
Obviously, check that all the powers and grounds for the UCH are good as well...
Thank you for watching and for your comment!

[@henkdej8477]

@@LMAutoRepairs Wow you are fast! Appreciated! Thank you, I will give it another try when my thin probes come in and let you know.

[@LMAutoRepairs]

👍👍👍

[@robo-factory]

I watched all your videos
respect

[@LMAutoRepairs]

zayn aoun
Thank you for watching, for your comment and support my channel.
Much appreciated!

[@titankevin82]

Do you have a video of how to take car seat out. And disconnect the seat belt in the side of the seat connected to the seat??

[@LMAutoRepairs]

Hi
Sorry, don't think I do...
Thank you for watching!

[@jazpeeris5417]

Thanks so much for this

[@LMAutoRepairs]

Thank you for watching and for your comment!

[@magid5441]

fantastic job

[@LMAutoRepairs]

Magid
Hi
Thank you for watching and for your comment!

[@frankkeller2649]

Hi, I know this is late but what size torx did you use to get seat out... Thanks

[@LMAutoRepairs]

Frank Keller
Hi
I can't remember... sorry...
Thank you for watching!

[@frankkeller2649]

LM Auto Repairs it's a torx 40.. Thanks

[@husseinolivia2548]

Good Job thanks for sharing

[@LMAutoRepairs]

Thank you!

[@golfrrrr]

Good video too many "um"s I stopped counting at 42.

[@LMAutoRepairs]

Not a problem... Good enough if you learned something...
Thank you for watching!

[@alvaro31415]

muito bom !!

[@LMAutoRepairs]

Alvaro Barreto
Muito obrigado...

[@vasileoprinca7913]

too much : and ooo,and aaaa!

[@LMAutoRepairs]

It is a shame that that is the only thing you take from the video...
Thank you for watching anyway!

[@MrRcsz]

The guy give you his knowledge on the plate for free and you moan about details like that. He's a mechanic not a news presenter.