Interceptor 650 Hydraulic Clutch & Master Cylinder Installed
Вставка
- Опубліковано 7 вер 2024
- Follow Me On :
Instagram - captmadhu
Twitter - @captmadhu
Facebook - Madhusudhan Muraleei
Products Link : / chennai_bikers_official
Shot On -GoPro Hero 8
Audio Mic - www.amazon.in/...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Disappeared- On Fire [NCS Release]
Music provided by NoCopyrightSounds.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DISCLAIMER- Please note the presenter / Owner have no intentions to endorse or advertise the products mentioned in the video. Also, note that the presenter/owner has no understanding with the sellers/ service provider and the buyers are entitled to make their own decisions. This video is solely for viewership and knowledge sharing. The prices mentioned in the video are approximate cost and may differ from the current prices.
great info bro, I cannot stop thinking about how vulnerable those two cylinders are to a fall, say we go touring and one of them happens to break it would be disastrous? or are there any mods to safeguard that
Thanks for this amazing video..I had contacted that dealer previously.But he takes a lot of time to reply ..
So I was not sure about that dealer .After this video .I am a confident to buy these from that dealer ..
Hi, I can see the video is around 10months old as of today, how is your experience till date with the hydraulic clutch system? The maintenance and product quality?
Ithennado headlight il athapookalavoo?
I really hope you know that these are replicas. Brembo RCS is pretty damn expensive, its almost 40k and it does not come with the reservoir in the box. That has to be bought separately. I wouldn't risk my life with these cheap knock offs, especially on fast moving motorcycles. Get the actual ones.
Lrl motor sell authentic products
Hellow sir .. could you please tell .. these levers are 14mm or 16mm or 17mm
I'll never go for these (If) fake Brembos. Cause major problems with the bike, especially with the shifting of the gear. Better go for RCB if you cannot afford the OG Brembos.
you bought the wrong master cylinder size for your clutch, that is why you can't squeeze your clutch level in all the way and why it's so hard to pull. For clutch application you should have gotten between a 12mm to 14mm diameter piston size, depending on the size of the slave cylinder. That would have made for a really easy pull. The 19mm diameter piston you got right now is intended for dual caliper 4-piston brakes, not for clutches.
I have not seen this conversion on any INT 650. Good. Could you please share How much did the conversion cost. Also the link for the bar end mirrors.
Thanks buddy... Please contact chennai bikers for the Brembo Brakes and levers with the link in my video for more details and information... They can help you... Below is the link for the bar end mirrors .. Thanks
www.amazon.in/Universal-Mirrors-Motorycle-Handlebar-Davidosn/dp/B083ZR1RNB/ref=sr_1_2?crid=SARJAOWWW8QE&dchild=1&keywords=bar+end+mirror+for+royal+enfield+interceptor+650&qid=1598864569&replacementKeywords=bar+end+mirror+for+650&sprefix=bar+end+mirrors+%2Caps%2C281&sr=8-2&vehicle=Royal+Enfield%3AInterceptor
Great video. What version of the Brembo Master Cylinder is this please?
Wildlife Moto thanks bro .. It’s a universal brembo Master cylinder and it’s available here in India..
Price plz
Wtsp details 9895821640
The reservoir hose seems to be pinched
Nice information 👍👍 I just have one question the abs will work or not
Thanks ... Yes the ABS works absolutely fine...
Thanks bro provide product link 🔗
Bro im from bangalore ... where did you get it fixed ?/ who installed the hydraulic clutch for you ???
Hi bro after seeing ur Vedio I was really excited to get one for my interceptor, today I installed it but I feel the front braking is good as u said but the clutch feels more stiff than the stockones, do u feel the same
I've JAWA classic. Can I try clutch system. Pls share me information of product and mechanic.
Hey! Does the brake interfare with the ABS on my bike? I have a TBX 500 which already has ABS and for brakes there are already master cylinder. Do I need to bypass those and buy a brembo kit or I can install just the hydraulic clutch?
Which break line did you use ? Why not a steel braided brake line ? Nice video 👍
Thanks buddy ... The length to reachthe clutch was not enough.. So we had to use the Avenger Cable for the length but its absolutely fine and good and also has steel lining inside..
I know you had some issue with clutch but how good reliable is the brakes. Are they functioning normal
I lost my brake oil cap today.. and i need to buy whole master cylinder.. it cost around 4000.. so please do you have any idea on where will i just get the cap for brake oil kit.. mine is continental gt
Can i use this my classic 350
Sir break clutch kahan se process kiye full system ka link bhejen
chennai bikers.. Search on google buddy
Very good update bro :-) Same pinch I have the same key ring!
Thanks bro Arnab :)
Hi, I'm from Bangalore, where did you get it installed?
Sir, really a informative video for those who are looking to install hrdraulic clutch and master cylinder, can i know the total cost for this, full sett?
u will feel more lighter pull if u use original rcs19, clearly yours is fake one. is totally different feel from original
Hello sir i am Ajay, can we use this for himalayan sir
Is the this brembo original?
Thala! What about the clutch switch did it. Fit??
Hey bro!
How's the set-up? Have faced any issues? Can it be considered safe?
Thanks.
Setup was initially very good and helpful but I had some issue recently because the gears are not engaging correctly.. So dont buy it for now..
How much cost both side brothers
Brother, nice lever set. How is the review after using it since installation. Can we connect offline to discuss this? I am also based in bangalore
Its very good so far and i have done lot of long rides as well .. No risk i feel...
Kahan se purchase kiya
Bro is it orginal product
Please help me from where have you purchased them?
Hello JT
Hope you're doin good
Please let me know , where did u get the hydraulic clutch cable from?🙏
Hi buddy I am fine thanks .. I got it from Chennai bikers .. 🙏🏻
@@jettuber7867 all set for how much?
Total cost of Brambo rcs19 master cylinder & hydraulic cluch
cable tie needs to be cut right at the edge, its poking out.
How you installed the clutch switch???
do you get the slave cylinder with this set...or did you purchased it separately....the thing at 3:28
No buddy I got it along with the levers ...
what is the price bro
Hi, can you share the LED headlight link? Thanks a lot
kingindian.in/High-Performance-OSRAM-LED-Headlight-D1-p144399245
Hi, thanks for the video and information regarding the hydraulic clutch. I'm from Bangalore and I own a versys 650 and I'm planning to buy this set for mine. How did you place an order from Chennai bikers? Can they be trusted with the money we tranfer? Because in many reviews people have mentioned that they block your contact once you transfer the money. I just wanna know your experience with them and please dont worry, I wont quote you on this. Cheers.
Thanks buddy .. but I suggest please stay with the stock ones from Kawasaki as they are very advanced than these levers ..
@@jettuber7867 Hey thanks for the quick reply. I had almost placed the order. Thank god they did not pick up my call! Versys clutch is on the heavier side, so i thought of getting hydraulic ones. Guess I have to stick to the stock ones or buy an authentic brembo RCS set! Thanks anyways. Happy and safe riding.
@@shashankgowda1 you can also try RCB racing levers they have something for 650 and is good and reliable .. or buy the genuine Brembo ones but it costs a bomb 💣 😁
@@jettuber7867 yeah thats my next option. Original Brembos cost around 35k..so comparatively RCB is cheaper 😃
@@shashankgowda1 so are you going with RCB ? Let me know which one you opt. As these comes with different stroke length. I have Ninja 650 and also planning for the RCB one.
Can I buy this for Duke 200 bs3?
From where we can purchase this
What was the price ? Thank you in advance
Is it original
what are the chances of clutch cuttting with this?
Good info
Thanks Francis
Length of clutch hose pipe?
How much did u pay
Hello,What is the cost of brembo master cylinder and hydraulic clutch??
Hi Kiran..
Please contact chennai bikers in the link in my video for more details and information... They can help you...
@@jettuber7867 Ok Bro, is it Genuine Brembo master cylinder? because i heard that there is lot of Replicas in India and getting an OE is harder.And one more doubt ,have you used the stock clutch cables ??Does the stock clutch cables suit with this hydrulic set up?
@@kiranmathur bro Yes i agree with you... the Genuine Brembo is very expensive.. This is a first copy but it works fine and great.. Also the Stock clutch cable cannot be used as its wired .. I have used an front disc hydraulic hose of avenger 200 as the length of it suits perfectly...
Bro its a replica product is it safe?
1st Copy bro
@@jettuber7867 ya is it safe?
Akshay yes absolutely safe I have done quite a lot of long rides and it’s all good
@@jettuber7867 The entire unit including levers ? or Just the master cylinder is first copy ?
@@H7.MotoTech including levers ..
Price of whole setup?
Bro any problem this product ? Good r not good ?
Product is not good i have started facing issues now.. Will soon come up with Video ..
Bro can you share the video soon
In my personal opinion I wouldn't recommend buying fake brembo Master cylinder
How much does it cost bro!
What's its cost???
Price tell me sir
Price
Are you from Mathura?
No from Bangalore
How much did it cost you?
around 9K incluyding installation but please dont buy .. I have some problems with it now..
@@jettuber7867 Thanks alot... I was going for it....
@@jettuber7867 the original ones are close to 35k
Price ?
Price??
Around 8K including installation