My cleaning station is pumping out of the tray the water, but it is not pumping in the clean water. I deep clean the tray is now free of dust or hair, but it still not pumping clean water in the tray.
Hello. I have a Omni X1 and my station does not put water from the clean tank on the bottom plate, but I hear the water pump when it send water to the dirty tank. Could the water pump still be bad?
Hi it seems my X1 OMNI station doesnot fill the robot tank so the robot mopps dry would you please make a video about it ? even when i push the self cleaning for the station there is no water coming out
Hi, thanks for the video. Could you make the video to show how to remove the bottom plate please.
It will help a lot. Thanks.
How to remove the bottom cleaning sink?
How do you get the bottom plate off?
My cleaning station is pumping out of the tray the water, but it is not pumping in the clean water. I deep clean the tray is now free of dust or hair, but it still not pumping clean water in the tray.
thank you for the trick
How to remove the bottom base ?
Hi, can I use an X1 turbo on the X1 omni base? Thank you
Sure can use
But dust won't transfer that's all.rest all same can use
Thank you for your reply. So even if the robot has the predisposition for automatic emptying, it wouldn't work, right?
Can I order parts from you to fix my Omni X1?
No clean water coming out on my X1 Omni. I hear the pump running. What could be the problem. I open it up and don't see any blockage on the tubes.
Ok..I fixed it. Replaced the pump that draws clean water. Ordered from AliExpress.
@@TReyes-ft9ts could you please share it with me? As i have the same issue.. Also the steps how to replace it.. Plzzzzz
Hello. I have a Omni X1 and my station does not put water from the clean tank on the bottom plate, but I hear the water pump when it send water to the dirty tank. Could the water pump still be bad?
Plz check the water tank pipe sometime cracked or solinoed pump need to replace
My issue is the drain port is clear, Even the trap is clear. I can see into it with a mirror, i THINK something is blocking the tube further up.
- use a syringe to clear the blockage, it worked for me. I literally youtubed everything bc I was so frustrated
My water is not coming
Hi it seems my X1 OMNI station doesnot fill the robot tank so the robot mopps dry
would you please make a video about it ? even when i push the self cleaning for the station there is no water coming out
If water is not going down for mop function means pump or Solinoid valve not functioning
Pump attach with clean water tank then that pump connects to solinoid valve
How can I get the parts to replace them?
@@ecovacstechnicalsupport5278 how to fix this issue?
I have a ECOVACS X1 OMNI with the msj unable to reach the designated area.
Robot reseted many times and continues with the error.
D-tof assembly need to replace