Це відео не доступне.
Перепрошуємо.
TMAX Fuel Controller Install : Malossi Force Master 2 : 2008-2011 Yamaha TMAX 500
Вставка
- Опубліковано 18 сер 2024
- Have you installed and air filter and exhaust on your motorcycle? Maybe you need a fuel controller. Watch a step by step installation of a Malossi Force Master 2 fuel controller on my 2011 Yamaha TMAX 500.
✅Tip Jar (Did this video help or entertain you?)✅
paypal.me/49cc...
TMAX Body Panel Removal & Installation Videos :
• Yamaha TMAX Major Serv...
• TMAX 500 Body Panel Pl...
**************************
Songs provided from the UA-cam Audio Library. (In order of appearance.)
- Sun Spots by Silent Partner (Intro)
- Yes And No At The Same Time by half.cool
- To The Sun And Back by TrackTribe
- Get Tough by TrackTribe
0:00 Intro
0:24 Why use fuel controller?
1:47 Install Begins
3:38 TPS Wiring
5:39 Fuel Injector Connectors
6:19 Ground Wire
6:45 Ignition Coil Wiring
7:41 TPS Calibration
9:03 Preloaded Tunes
#FuelController #Motorcycle #Tuner
I’m piecing together a previously stolen 09 tmax. Your videos have helped tremendously because I can watch and see what it’s supposed to look like. And what hardware goes where. Thank you sir.
Glad they help! Good luck with your rebuild.
Looks good. Do keep in mind that those clamp-on style wiretaps tend to have problems over time. You may want to consider going back in soldering the connection. In the future I really like the PosiTap piercing style taps. They seem to last a lot longer
Hey man, i have been following you for a while and i have used your tmax installation videos a lot. The best thing to do is to install a malossi overrange pack or just the variator. I have a simular setup to yours but with the malossi variator and it's a beast. The malossi variator keeps the revs in the range where the bike makes peak power and this has been the biggest improvement for me. Thanks for making these awesome videos :)
Actually installed a variator before the exhaust, fiilter and fuel controller. Just didn't do an install vid because I already have CVT service stuff up that basically covers it. I'm going to do a vid later about all of the mods with results. Yeah, the variator transforms it.
@@49ccscoot alright nice! Now you have unleashed the beast!
This is really awesome!!! Thank you.
Can’t wait to see tests on variant rpms and maps
finaly someone with proper exhaust swap :)
Looking forward to test 0-60 etc with various adjustments of the malossi unit
Thanks you safed me
Such a greatly made informational video.
Another great video Brent, i wasn't even aware this controller existed, but now i have to get one haha.
I have the same Yoshi system as you ( though luckily mine fit without any issues, and like you, i dropped my DB killer mounting screw inside the muffler end cap the first time i tried to install it 🤣) and a K&N panel filter, and definitley notice bogging on initial acceleration.
Also, tuning was one of the main reasons i was on the fence about going the Malossi 560cc kit, but with this little doohickey i sould be able to get a decent improvement from the kit.
Thanks again for the solid info.
Stay tuned. I'm working on a video with results of each modification as we speak.
❤ bet that port work,works now can’t wate till dyno time yea get you a yband for it and a vid would help us for install thanks 🙏 r you going to change to aftermarket cams on the dyno ?
There won't be a dyno. Acceleration testing... but don't worry, you'll be able to see a difference. No cams.
i have Honda cbr 125-166 cc,how can i Find the best settings,and it s Ok to have map 3?
Almost surprised you didn't go microsquirt route. But this will be a good video regardless :)
Sometimes simple is better IMO. This is not intended to be a race bike. I just want it a little faster for regular riding. DynoJet has the tuner for the TMAX 500 on sale (prob because not very many people in the US are riding/modding them) nearly $100 less and can build your own fuel tables, but I was hoping for plug and play.
@@49ccscoot definitely understand the plug and play aspect! Microsquirt needs so much wiring and other items just to control the engine and is quite a pain in itself. Loving the video so far bud, and always appreciate the detail you go through to show a clean installation.
@@49ccscoot u nas w Europie uturbia sie t maxy 140 km to nie problem
@@kamilr3511 Mine would go 161kph stock according to GPS. Faster is perhaps the wrong term. Quicker or better acceleration is what I was really looking for.
I have looking for a long time for a tuto about installing tmax530 ironmax front light in older tmax530 2013 but nothing found 😢.. could you please do a video about what?
I've only ever seen my 500 and I think a 2015-2016 maybe twice randomly years ago. Sorry. Definitely don't have the next gen TMAX to play with.
@@49ccscoot ohh , anyways thanks for the reply 🙏 keep it up.
Hallo
can you maybe help me? with the setting? malossi force master 2
I drive one yamaha yzf r125 2013
with Naraku 150ccm 60mm
with original 125 head 🫶🏻
what is best for me?👍🙂
The best would be to get a dyno tune. Next best is probably to do it as shown in the video with a wideband. Even without the wideband, if you can track performance accurately at a track or with a dragy, you can dial full throttle in based on best results at least.
Hello i have force Master 3 and map 1 with malossi Kit and akrspovic exhaust what you think ist the best setup and How i can tune it Fine ?
Sounds like map 1 or map 2. Fine tuning is shown in the video.
Yes but i dont undestand 12.8:1.
How much
Low:
Mid:
High:
Thank you for the anwser you are a beast👍🏼
@@freakyo9367 Take it to a dyno to get them to dial it in then. That would probably be the best way. You could make small changes to the High dial and test with acceleration runs to see what makes it faster. The other dials would be set based on how it reacts while riding at lower throttle positions to make sure it doesn't surge or stumble.
Where did you buy the tuner?
ScooterPartsCo had it.
How to set the dials for full power?
Your best bet is a dyno and fiddle with the dials till you see the most power. Short of that, you can see how I did it in the video.
@@49ccscoot i have Honda cbr 125-166 cc,how can i Find the best settings,and it s Ok to have map 3?
@@49ccscootMarco Magistrali Boss tuned Europe t max Turbo :D
Really need some help been lookin on your page an website trying to find information on what’s all needed to do a 90cc jog clone swap from one of the many atv 90cc that are out there
I covered that here, showing the process of swapping out my Keeway Venus engine for a Polaris 90 engine :
49ccscoot.proboards.com/thread/999/90cc-minarelli-engine-swap-info
@@49ccscoot thank you so much