good job on the video, I was wondering do this Arm Rests fold in and out, incase you dont want to use arm rests? thanks in advance and I enjoy your videso subbed!
I bought my Z330M at Lowe's yesterday, they were clearancing the last few they had left. Didn't research much but unlike days in the past these appear to be the same mowers sold at JD Dealers. I am missing the compartment door, led lights, arm rests, and the mat on the floor deck you showed on your review video. Do all these items come with the unit at the dealer they are just removed from the Lowe's version to keep costs down? Ive owned a couple JD and bought at local dealers, so dont beat me up too much. :)
I bought a Z320M recently and the only “option” it came with was the hitch. I bought the compartment door (really Deere?), step, foot mat, arm rest and foot pegs online. Arm rest and foot pad has been the biggest noticeable improvement! The pegs and step are nice, but I could have waited. Next, the mulch kit!
@@fenwaythegreat1782 I bought the floor mat and arm rests. Guess I’ll grab the foot pegs next then eventually the mulch kit. My only gripe is tuning the controls to drive straight. I’ve adjusted the bolts but seems a tad off.
@@WesternEquipment Thanks. Just watched it. You missed a step in the installation. I found the fix because I was trying to figure out why my bagger would pick up no grass. I was looking for your install video to see where I messed up, but it is Deere’s fault because they missed a whole step in the installation manual.
Brett, I am slightly confused here. Are the part numbers given for this non power-flow bagger just for the 42" deck? Because I thought the one I needed for my Z330R 48A deck was a Power Flow model BUC11344? Also the mulch control kit number HAS to be different for the 42A, 48A, & 54A decks, so the info seems a bit misleading to say that these are the part numbers for these accessories for Z300 series mowers....or am I missing something here? You never said that these were p/n's just for 42" deck models.
I just recently purchased a Z315e with the bagger kit BUC 11342. I didn't realize at first that it didn't come with the blower. Have you compared this kit to the one that has the blower attachment?? I mowed the other day and it seems like it just picked up leaves and could do my entire yard (39000 sqft.) and maybe dump the bags once or twice. I have borrowed a neighbors Z320e with the blower and it appears to work much better than without the blower. Please advise
Blowers are only and option on 48" and 54" decks typically. I have never seen one on a 42" deck but I would assume it would do better since it is creating more air flow than just what the deck is making.
Maybe I’m just clumsy, but it would have been nice if the rubber floor mats would have came standard. I don’t always have 100% “dry areas” so slipping even with the integrated small holes is a concern. Ok I am clumsy.
That is definitely the step kit part number but it may not be on the site right now. If you don't find it you can reach out to our customer support to get it ordered.
@@mellowjammer you are getting a better everything else that comes along with that step. Engine, Hydros, Seat, Deck, etc... I know it doesn't matter to most people but for me when I looked at what was provided on the z300 and z500 I didn't see any value. You got what you paid for and that wasn't much. I looked at the 740r for the better engine since my last mower was a d120 with a junk briggs that liked to blow head gaskets. When I went to the dealer they showed me a z920m for 1K more then the z740r and It was a no brainier to spend the little extra and get a lot more of a machine. To each there own, value is a subjective thing and for one person it can mean just the price tag and another it could be features or options.
@@FishFind3000 I'm not arguing your point, however, I'm just saying that people who are looking for a commercial $12000 mower are probably not watching this video.
You can buy these at any of your local John Deere dealerships or you can reach out to 247Parts.com and the support team would be able to help you find what you need.
Here is the link where you can buy the kit 247parts.com/BUC10705/. Unfortunately, I do not have an install video yet for this kit. There should be instructions with the kit and if you have any trouble let me know and I will help the best I can!
Trying to get a bagger kit for my z225 zero turn it’s an older tractor but it has never failed me, is it possible to by a different bagger kit and modify it to fit the z225
We are transitioning to a new inventory management system so this should be fixed soon. Make sure and call the customer support line if you need to order something that is not listed on the site. I am so sorry for the inconvenience!
Nice job on the descriptions and providing the part numbers for ordering.
Thank you! I hope it was helpful!
Thanks for the very helpful videos!
Is there a weed trimmer attachment for the Z330R? Also is there a tool holder attachment for a shovel?
Beautiful machine.
Can the bagger kit and mulching kit both be installed on the mower?
Can you have a mulching kit installed but open and still use a bagger?
Is there a part number for just the front weight kit
Front of that step looks pretty tight with that front caster, is there good clearance there so it doesn't get into the wheel?
Yes, there is. I thought the same thing at first but it is good on clearance.
good job on the video, I was wondering do this Arm Rests fold in and out, incase you dont want to use arm rests? thanks in advance and I enjoy your videso subbed!
I bought my Z330M at Lowe's yesterday, they were clearancing the last few they had left. Didn't research much but unlike days in the past these appear to be the same mowers sold at JD Dealers. I am missing the compartment door, led lights, arm rests, and the mat on the floor deck you showed on your review video. Do all these items come with the unit at the dealer they are just removed from the Lowe's version to keep costs down? Ive owned a couple JD and bought at local dealers, so dont beat me up too much. :)
I bought a Z320M recently and the only “option” it came with was the hitch. I bought the compartment door (really Deere?), step, foot mat, arm rest and foot pegs online. Arm rest and foot pad has been the biggest noticeable improvement! The pegs and step are nice, but I could have waited. Next, the mulch kit!
@@fenwaythegreat1782 I bought the floor mat and arm rests. Guess I’ll grab the foot pegs next then eventually the mulch kit. My only gripe is tuning the controls to drive straight. I’ve adjusted the bolts but seems a tad off.
Can you tow a lawn cart with the zero turn mowers? I got a d130 now and I use the hitch a lot.
Yes you can! You just need to make sure and add the hitch kit to whichever zero turn you buy.
Is there a part number for the front weight bracket?
Do you have an instal video for the MCS system? I have seen videos on your page for everything else you have listed.
Yes, go check out our 247Parts channel. It is up now!
@@WesternEquipment Thanks. Just watched it. You missed a step in the installation. I found the fix because I was trying to figure out why my bagger would pick up no grass. I was looking for your install video to see where I messed up, but it is Deere’s fault because they missed a whole step in the installation manual.
Your amazing ! So much info 😂🤣👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽🙌🏽🙌🏽🙌🏽
What about the light install BUC11567???
do you need the much control kit with the bagger?
Brett, I am slightly confused here. Are the part numbers given for this non power-flow bagger just for the 42" deck? Because I thought the one I needed for my Z330R 48A deck was a Power Flow model BUC11344? Also the mulch control kit number HAS to be different for the 42A, 48A, & 54A decks, so the info seems a bit misleading to say that these are the part numbers for these accessories for Z300 series mowers....or am I missing something here? You never said that these were p/n's just for 42" deck models.
Great point! I did forget to say that!! I will get the 48 and 54 Bagger kits and mulch control kits listed in the description. Good catch, thank you!!
Will you do a video of how to install the light kits for the z530m series
Stay tuned to our other channel 247Parts. This is soon to come!
Can you please do attachments for Z5
That video is actually in the works!!
Would a 48 inch deck mout to a z320r?
So no ROP attachment or sunshade? I know they are on higher end models but was hoping there would be an option.
I just recently purchased a Z315e with the bagger kit BUC 11342. I didn't realize at first that it didn't come with the blower. Have you compared this kit to the one that has the blower attachment?? I mowed the other day and it seems like it just picked up leaves and could do my entire yard (39000 sqft.) and maybe dump the bags once or twice. I have borrowed a neighbors Z320e with the blower and it appears to work much better than without the blower. Please advise
Blowers are only and option on 48" and 54" decks typically. I have never seen one on a 42" deck but I would assume it would do better since it is creating more air flow than just what the deck is making.
Hello. I have a Z375R mower. What is the correct bagger for it? Also do I need bumper added to the back to install a bagger system?
I am looking for a ZT but part of my yard is rough will the z330r handle the rough ground?
Maybe I’m just clumsy, but it would have been nice if the rubber floor mats would have came standard. I don’t always have 100% “dry areas” so slipping even with the integrated small holes is a concern. Ok I am clumsy.
I completely understand! I am clumsy too, so I definitely enjoy the floor mats.
Will all of these attachments work with my z345m, or are they just for the R series?
@@WesternEquipmentso I went to the website, but the z330m is not listed. Do I need to specify each accessory part in the search menu?
The part number for the step BUC11478 pulls up the mulching attachments on your website, do you have the right P/N?
That is definitely the step kit part number but it may not be on the site right now. If you don't find it you can reach out to our customer support to get it ordered.
That step is the best invention ever made for zero turns
The commercial grade zero turns allow you to just step on the mower deck. It’s a lower step and is more comfortable. Plus it’s a standard option.
Pretty cool option!
@@FishFind3000 And all you have to do is pay about $8800 dollars more for that Z900 series mower to get that step as standard equipment...😬
@@mellowjammer you are getting a better everything else that comes along with that step. Engine, Hydros, Seat, Deck, etc... I know it doesn't matter to most people but for me when I looked at what was provided on the z300 and z500 I didn't see any value. You got what you paid for and that wasn't much. I looked at the 740r for the better engine since my last mower was a d120 with a junk briggs that liked to blow head gaskets. When I went to the dealer they showed me a z920m for 1K more then the z740r and It was a no brainier to spend the little extra and get a lot more of a machine. To each there own, value is a subjective thing and for one person it can mean just the price tag and another it could be features or options.
@@FishFind3000 I'm not arguing your point, however, I'm just saying that people who are looking for a commercial $12000 mower are probably not watching this video.
Do these mowers have a hitch so that you can tow a cart around?
Yes, they do.
I looked up the part number and only found the kit for the 48” deck. I recently bought a z315e 42”. Are they sorta interchangeable?
Which kit are you looking for?
I am trying to get the buc11342.
Where can I buy individual parts for my bagger system?
You can buy these at any of your local John Deere dealerships or you can reach out to 247Parts.com and the support team would be able to help you find what you need.
But does the mulch kit actually work
Could you share the width of the Z320R with the MCS installed?
I do not have an exact measurement but it should be around 56-58 inches.
I need the mulch control kit for the Z330R 48 in. Can you give me a link and do you have install video on it?
Here is the link where you can buy the kit 247parts.com/BUC10705/. Unfortunately, I do not have an install video yet for this kit. There should be instructions with the kit and if you have any trouble let me know and I will help the best I can!
Trying to get a bagger kit for my z225 zero turn it’s an older tractor but it has never failed me, is it possible to by a different bagger kit and modify it to fit the z225
I'm sure it would be possible, but have you checked with your local dealer to see if one is still available for your model?
can you drive these things on the street if you wanted to
This would all depend on your city laws and ordinances. I personally wouldn't recommend doing this until you check with your local laws.
I tried every one of those part #'s and your website doesn't pull any of them up.
We are transitioning to a new inventory management system so this should be fixed soon. Make sure and call the customer support line if you need to order something that is not listed on the site. I am so sorry for the inconvenience!
Can you put an utility cart on this with the bagger on or no
Asl long as the hitch is still showing you can for sure!
@@WesternEquipment ok im trying to come up with an idea
Nice videos, but your site is jacked. The above part numbers not found
Yes, this has been a work in progress. If you need any of the listed parts please call the customer support line so they can get you fixed up.
I got none of the attachments.....I can see I'm not missing anything
Mower
True