Thank you Joeseph for such kind feedback! Happy New year from Wales! Richard
2 роки тому+7
Richard ! Voilà 1:23 We enjoyed this video. Once again we have the confirmation that the Jeager Lecoultre is in the hands of the right person! Congratulations, happy new year and see you soon
I’ll try again. One of the things I like about your videos is that you’re not wedded to the use of expensive, special tools: hand levers from India, not Horotec, ultra sonic cleaner rather than a multistage washing machine and then modified tweezers to remove wheel on extended pivot. It gives me, as a real amateur, much encouragement. Thank you.
Hi Martin... Yes, I use stuff based on its engineering usefulness and not because it belongs to a brand or I think I 'ought' to use it. If a tool works well I keep it if not I look for an alternative. Thanks for the feedback. Richard
Another fascinating video. A lot of UA-cam content has a sort of "DIY" air about it. The idea that that, with a few tools and a little perseverance, the viewer could easily recreate the work shown in the video. Not so with these watchmaker videos. I think I'd sooner perform internal surgery on myself than open up a mechanical watch, at least not without several years of training and a few thousand pounds worth of specialty tools and materials. I had to have my early 1990s Rolex Submariner serviced a couple of years ago, after it developed the annoying habit of stopping when not being worn on my wrist. At the time I grumbled to myself about the £400-odd it cost to have the work done. But after watching a few of these videos, and getting a better understanding of the care and skill required, to say nothing of the microscopically tiny pieces involved, the price seemed very reasonable. Its also amazing to me to see how pristine and perfectly functioning the internal components of a 40+ year old watch are. And that given the skill and care of a master watchmaker, a careful cleaning and lubrication - and a new mainspring - a good Rolex watch probably has a working lifespan of many, many decades.
Hi Josh... This is music to my ears as I am trying to create films that are therapeutic in just the way you mention. Thank you so much for taking a moment to give this feedback. Richard
Yes... I am little surprised how well this video is being received as I had developed the notion that folks do not much like hearing me speak . My natural inclination is to give a commentary so think I may stick with this style. Thanks gor this feedback. Richard
The modified tweezers are a great idea, now I wish I'd watched this video yesterday BEFORE I bought a Burgeon #3 presto tool on eBay at some expense! (I've also just bought a bunch of tea strainer balls for the ultrasonic thanks to your innovating ideas!) After more than a year of tinkering I'm now getting set up with everything I need for full servicing; I'm going to begin by restoring vintage watches and building my skill-set on those old movements. Your videos have been hugely inspirational and helpful and so at the start of 2022 I salute you sir!
Another tip I picked up elsewhere - instead of filling the ultrasonic with cleaning solution every time you can fill it with water and put the parts to be cleaned into small jars or zip-lock bags filled with solution (the ultra-sonic waves will easily penetrate glass or polythene) this can save on consumables and time emptying and cleaning the machine. I'll probably try both methods and see how they work out :)
@@fLaMePr0oF i use this method with jam jars it works so well parts come out spotless trick is to use 2 sometimes 3 jars with rinsing solution i.e. use jar 1 then jar 2 then jar 3. Jar 3 should be virtually free from cleaning contaminants.
@@antsfur Thanks, will give that a go! I've just registered my business name everywhere although I won't be doing servicing for a long while yet, just basic maintenance and selling my custom builds / mods - 😁"NotaWatchmaker"😁
Great Video - I have one question please, what screwdriver did you use to take the two screws out that hold in the movement to the case? I did the initial three to take the winding mechanism off, however the slot on the screws are too small to fit the driver in!
Hi there ... most watchmakers will use a set of screwdrivers that looks like this .... www.amazon.co.uk/dp/B07B8RBLDT ... something like this this will give you most of the sizes you need. However, it might be best to start on less valuable watches. I would not recommend that you start doing this on a Rolex or other valuable watch without any experience as it is very easy to damage the watch. Hope this is useful. Richard
@@richardperrettwatchmaker thanks, Richard! Appreciate the response. Did you use the screwdrivers above? The ones I have are similar to these, but as I say the two screws/clamps that hold the movement to the case are too thin-slotted to fit it in!. I had a look online and there’re ‘parallel’ screwdrivers which have a parallel end, rather than the normal tapered tip, however I don’t know if the tip is actually thinner than normal ones and thus’ wouldn’t be an advantage. Appreciate your help Richard. Thanks
i have an old rolex precision model (wind up only) that i bought while in the navy circa 1974. the stem comes out and will wind but not set the time. reminds me of the model you are working on...
I have a pair of tweezers very similar to your modified tweezers and I've never known what they were for. They have sat, ignored, in my bench drawer for years. Now I know what they can be used for. Thank you.
I love this video. I started practicing on an Air King movement. I wanted to know if you finished this video. Also what watch oil and grease do you recommend.
@@richardperrettwatchmaker Another question. Do you have a video that covers how the timing devise works? You showed it in this video when you say that the performance of the watch indicates that the watch needs work.
Hi Richard. I found a beautiful Patek pocket watch at Bogoff. It’s from 1924 and 18k for $5400. If I needed servicing in the future, could you work on it or should I take it to Patek?
Hi PUREBLOOD.. I think working on a watch is like visiting a beach. Whilst there you should enjoy it but you should make sure you leave no trace of you having been there. Thanks for the feedback. Richard
Hey, Richard. Thanks for the video! I have a question about the wheel you removed with your modified tweezer tool (driving wheel I think?). Does it come off of the pinion for the third wheel and then is friction fit back on during reassembly?
Hi joejunk... Yes it is as you describe. The wheel is friction fit onto an elongated pivot if one of the wheels in the going train. Hope this helps. Richard
Nice job Richard! I’d like to make a tool like you did for the 5 spoke wheel. Can you say more about it so I can replicate or could you make a short video on it! Re ultrasonic cleaning, how long do you do each clean for in the ultrasonic? What cleaning and rinsing and IPA do you use? I also use an ultrasonic cleaner and struggle to get good consistent results. I use Elma fluids and do a clean and 2 rinses all 20 minutes long. On very dirty watches I do a pre clean with peg wood, rock o and essence of renata with cotton buds. Sometimes if parts still come out a bit dirty I use Renata again. Cheers, Boyd.
Thank you Richard for your gift: a video to starting great the new year! I really hope to see the end of it soon. your workmanship it is a constant that manifests trughout all your videos. Really hope to see you "live" in the future. Stay safe! I wish you a wonderful 2022! Cheers from Italy.
IHi Steve ... I think the answer is in the video. I like to dunk the whole fork very briefly in alcohol after lubrication as I think this gives the best results. This is not possible when the fork is attached to the movement. Hope this explains. Richard
Thank you for answering a long-standing question.... I noticed in your other videos that some of the Rolex wheels are pink/purple & got the answer @ 9:27 - Teflon! 👍 I assumed it was more than just a decorative element like the blued steel screws, so really interesting to see Teflon being used at such a fine scale.... looks like it might be used to allow even finer tolerances in the separation of moving parts. Intriguing!
Happy New Year! Nice work as usual. I was wondering why those gears are purple. I thought it was just for style and had no idea it was Teflon. When "Big Problem" popped up when replacing the balance, my heart skipped a beat! 😳😁🤣
Thanks for posting another enjoyable video. I always wonder how Rolex's in particular end up with so much damage on their dials and hands. The brand constantly shouts about the water proofness of oyster cases after all. What do Rolex people do with their watches, use them as hammers when they can't be bothered going to the shed ???
Happy new year Richard, the air king is a smashing watch, honestly you bring my youth back to me standing over my uncles shoulders watching him repair watches, your a joy to "watch" 😉
Stem removed at 2:10 but back in at 2:15 ? Did you put back in for any reason ? To release energy ? Cannot buff the scratches out of the glass ? Way to gone ?
I was looking at the two screws for the automatic works,the threads on them appear to be rolled rather than cut.Can you confirm this Richard?It would at least satisfy my curiosity....................................
Happy New Year Richard! Wishing you health and happiness. How was the barrel arbour hole in the bridge? I noticed that the cap had wear on it. Congratulations on the new piece of kit.
Hello Richard, is there a problem in ultra-sonic washing some parts (balance spring, palet fork) as these sometimes include pasted parts....? I have read that somewhere...Best 2022 wishes !!!
Happy new year from Penrith hope it isn’t too hot at the dock! Any signs of previous fettling or do you think it’s been untouched since it left the factory?
Great video as usual Richard, nice little Air-King, it's a pity all movements with high jewel counts arn't decorated with engine turning it looks really good, but i suppose it would put prices up. Thanks Richard Happy New Year to you and family.
Happy 2022 Major! Some very good close up images in this video--felt like I was looking through a microscope. Looking forward to watching episode 2 with the new display screen.
Thanks for another fantastic video, much appreciated! Question, at 11:00 you mention 3 cleaning solutions you use in your ultrasonic cleaner. Would you mind going into greater detail on the three solutions? Many thanks!
Hi BDC C ... Sure www.cousinsuk.com/product/lr-566-watch-cleaner and then it's own rinse followed up with isopropyl alcohol. Important - No heat in the ultrasonic! Hope this helps. Richard
Hello Richard. As a long time collector who recently took up watchmaking I appreciate that you are using some less expensive watchmaking tools us hobbyist have access to. When I started getting into the watchmaking side with basic movement services, many professionals chimed in on the tools required including a ELMA or L&R cleaning machine that spins the movement parts in a solution. They seemed firm on that for a proper parts cleaning. Like many watchmaking tools theses machines can be pricey for the home hobbyist. I appreciate you as a professional watchmaker still use a affordable tools like a ultrasonic machine. I also seen some of your other video's where you are using Stella brand Italian made tweezers instead of Dumont. I'm sure you buy more expensive Bergeon or Hortec when justified but go a bit more economical on things that you can. I would like to see you make a video on what tools a beginning watchmaker needs vs required for a proper job starting out. Thanks.
Hi 24 Hour GMT Channel ... great feedback thank you. The importance thing is what a tool does as evidenced by the result. Ultransonic cleaners are great I think. Perhaps more importantly so do some high end watch brands who specify their use in the latter stages of cleaning. These days I tend to use steel and brass tweezers which I customise the tips of to my liking. Thanks again. Richard
@@richardperrettwatchmaker Yes sir. Very true. It does appear that like watch brand snobbery, not surprising there is a bit of snobbery on the tool side as well. Thanks.
@@24hourgmtchannel64 Just keep in mind that an ultrasonic cleaner offers a _different type of cleaning_ to those 4-stage pro machines. An *ultrasonic* is a gentler (and more forgiving!) option because it's using small waves to _knock dirt off without moving the parts_ (like a dishwasher)... it's a cheaper machine but you still need to manually do rinse & dry cycles. Those *4-stage cleaners* _move the parts through the solution_ to get a deeper cleanse (think top-load washing machine).... but they also clean end-to-end. Most pros & long-time hobbyists I've seen use a combination of both... ultrasonic for the case, band & sometimes the whole lot if it's not too rusty/dirty.... 4-stage when they need some heavier cleaning. It's important to understand the context & the reasons why certain tools (and even certain brands) are recommended.... not just assume it's 'snobbery' because they cost more. I've managed to collect numerous watchmaker & jeweller tools over the years which I use for completely different purposes in other hobbies, because they are perfect for doing specific (and usually very fine) jobs. Use what works for you! 👍
Good video Richard, very informative. Too bad your monitor stopped cooperating. Hopefully you'll show us how it all ends once your new equipment is sorted. I always like to see the final numbers on the time grapher. Happy New Years Cheers
Thank you so much Robert! Self taught ... I was a military engineer working on Main Battle Tanks in my 'former life'. Happy New Year and thanks for the feedback. Richard
@@richardperrettwatchmaker I am military will have completed 22 years in September I’m a driver by trade in logistics I like your major watch you have made it’s cool all the best for this year and keep up with the content you have some skill in what you do
Hi Richard, another great video! 18 months ago I bought a new Rolex Submariner with a gold inlay blue bezel and central gold links, (£11,250) from the Leeds main Rolex dealer. Everything is perfect but the dealer said to service every 5 years. Is that what you recommend as I will probably be sending it to you? I'm retired and although worn daily, is is not subject to any workplace environment, just looking pretty on my wrist.
Hi Will ... If everything is perfect I would not have it serviced for a few years yet personally. Much as I would enjoy having your watch I do not think from what you say now is the right time. These pieces are very well made and you are good for another two or three years at least unless you start to see any symptons of reduced performance. Hope this is helpful. Richard
I have enjoyed a number of your videos and one of the things I like is that you’re not wedded to the use of expensive equipment, eg: hand levers from India, ultra sonic clean
Sorry, it's been a while since I've checked in! These Rolex tool watches were so purpose built, but their prices are absolutely out of sight for most normal folk. I've wanted an Exporer I for ages, but there's no way I'm shelling out the prices they are asking now. Anyway, this Air King is in good hands, and about to be seen in a totally different way with your new camera/scope setup. Cheers.
Which color is this dial? I have the same one but ref 1002 Air King with a different written ``A`` in Air King. It looks Like a little bit purple. It is a rare dial? Thank you
Happy New Year Richard, great to see the close up camera work & nice to hear the running commentary again, very descriptive & helps us " mainspring monkeys" with identification. Looking forward to part 2 of this video. Regards from along the coast @ Llantwit Major
Possibly the wiring harness going into the back of the LCD has become faulty. A common problem on that kind of screen on a Canon EOS M3. You will easily be able to change the harness with your skill set. There are vids on You Tube on how to do it.
Hi dave ... yes I do but my repair bookings are full at the moment! Sorry if this isn't helpful but it does I guess answer your question at least. Richard
Happy new year, nice video! Is there any risk for the jewels, running them through the ultrasonic cleaner, by cleaning the entire main plate and bridges? Wondering if they could fall off?
Most jewels are fixed pretty solidly in their sockets in the main plate & bridges, and watchmakers ensure that any jewels that can be removed are secured by their little Incabloc clasps before they put them in the cleaner. But if a jewel does fall out in the ultrasonic machine it will either stay in the 'tea strainer' with the bridge or (worst case) fall to the bottom of the tub. Either way, Richard can re-fit them or order replacements if they do break.... it's amazing how robust these little timepieces are!
Happy New Year Richard!!! Another great job well done!! My new year's rewarding delightful video!@
Thank you Joeseph for such kind feedback! Happy New year from Wales! Richard
Richard ! Voilà 1:23
We enjoyed this video. Once again we have the confirmation that the Jeager Lecoultre is in the hands of the right person!
Congratulations, happy new year and see you soon
I’ll try again. One of the things I like about your videos is that you’re not wedded to the use of expensive, special tools: hand levers from India, not Horotec, ultra sonic cleaner rather than a multistage washing machine and then modified tweezers to remove wheel on extended pivot. It gives me, as a real amateur, much encouragement. Thank you.
Hi Martin... Yes, I use stuff based on its engineering usefulness and not because it belongs to a brand or I think I 'ought' to use it. If a tool works well I keep it if not I look for an alternative. Thanks for the feedback. Richard
Another fascinating video.
A lot of UA-cam content has a sort of "DIY" air about it. The idea that that, with a few tools and a little perseverance, the viewer could easily recreate the work shown in the video.
Not so with these watchmaker videos. I think I'd sooner perform internal surgery on myself than open up a mechanical watch, at least not without several years of training and a few thousand pounds worth of specialty tools and materials.
I had to have my early 1990s Rolex Submariner serviced a couple of years ago, after it developed the annoying habit of stopping when not being worn on my wrist. At the time I grumbled to myself about the £400-odd it cost to have the work done. But after watching a few of these videos, and getting a better understanding of the care and skill required, to say nothing of the microscopically tiny pieces involved, the price seemed very reasonable.
Its also amazing to me to see how pristine and perfectly functioning the internal components of a 40+ year old watch are. And that given the skill and care of a master watchmaker, a careful cleaning and lubrication - and a new mainspring - a good Rolex watch probably has a working lifespan of many, many decades.
I find it immensely relaxing to watch the process of disassembly and then reassembling. Keep going mate.
Hi Josh... This is music to my ears as I am trying to create films that are therapeutic in just the way you mention. Thank you so much for taking a moment to give this feedback. Richard
Alone the fact that you took so much care not scratching the movement made subscribe.
Wonderful job!
I like the added commentary as I have no idea how watches work but enjoy the dissembly/assembly process
Yes... I am little surprised how well this video is being received as I had developed the notion that folks do not much like hearing me speak . My natural inclination is to give a commentary so think I may stick with this style. Thanks gor this feedback. Richard
Amazing piece of engineering
The modified tweezers are a great idea, now I wish I'd watched this video yesterday BEFORE I bought a Burgeon #3 presto tool on eBay at some expense! (I've also just bought a bunch of tea strainer balls for the ultrasonic thanks to your innovating ideas!)
After more than a year of tinkering I'm now getting set up with everything I need for full servicing; I'm going to begin by restoring vintage watches and building my skill-set on those old movements. Your videos have been hugely inspirational and helpful and so at the start of 2022 I salute you sir!
Another tip I picked up elsewhere - instead of filling the ultrasonic with cleaning solution every time you can fill it with water and put the parts to be cleaned into small jars or zip-lock bags filled with solution (the ultra-sonic waves will easily penetrate glass or polythene) this can save on consumables and time emptying and cleaning the machine. I'll probably try both methods and see how they work out :)
@@fLaMePr0oF i use this method with jam jars it works so well parts come out spotless trick is to use 2 sometimes 3 jars with rinsing solution i.e. use jar 1 then jar 2 then jar 3. Jar 3 should be virtually free from cleaning contaminants.
@@antsfur Thanks, will give that a go!
I've just registered my business name everywhere although I won't be doing servicing for a long while yet, just basic maintenance and selling my custom builds / mods - 😁"NotaWatchmaker"😁
It's great to watch a skilled person at work, and very relaxing too,,bravo that was amazing
Happy new year to all of you. As always a joy to watch you at work. Regards Andre form Holland
Great attention to details in order not to scratch any component this is how a Rolex should be handled congrats
Hi eugenio248 ... yes I try to keep everything as smart as Rolex intended! Thanks so much for the feedback. Richard
happy new year richard , thanks for your help last year!
Great Video - I have one question please, what screwdriver did you use to take the two screws out that hold in the movement to the case? I did the initial three to take the winding mechanism off, however the slot on the screws are too small to fit the driver in!
Hi there ... most watchmakers will use a set of screwdrivers that looks like this .... www.amazon.co.uk/dp/B07B8RBLDT ... something like this this will give you most of the sizes you need. However, it might be best to start on less valuable watches. I would not recommend that you start doing this on a Rolex or other valuable watch without any experience as it is very easy to damage the watch. Hope this is useful. Richard
@@richardperrettwatchmaker thanks, Richard!
Appreciate the response.
Did you use the screwdrivers above? The ones I have are similar to these, but as I say the two screws/clamps that hold the movement to the case are too thin-slotted to fit it in!. I had a look online and there’re ‘parallel’ screwdrivers which have a parallel end, rather than the normal tapered tip, however I don’t know if the tip is actually thinner than normal ones and thus’ wouldn’t be an advantage.
Appreciate your help Richard.
Thanks
i have an old rolex precision model (wind up only) that i bought while in the navy circa 1974. the stem comes out and will wind but not set the time. reminds me of the model you are working on...
Amazingly stable hands. Your knowledge is impressive. The voice makes for good ASMR as well. Well done Mr. Perrett !
I have a pair of tweezers very similar to your modified tweezers and I've never known what they were for. They have sat, ignored, in my bench drawer for years.
Now I know what they can be used for. Thank you.
I love this video. I started practicing on an Air King movement. I wanted to know if you finished this video. Also what watch oil and grease do you recommend.
Hi Lynn ... episode 2 is shot and I am editing the footage at the moment. Hopefully coming out this weekend. Thanks for the feedback. Richard
@@richardperrettwatchmaker Another question. Do you have a video that covers how the timing devise works? You showed it in this video when you say that the performance of the watch indicates that the watch needs work.
Great video and channel. Great to see the gear you use to shoot your closeups. Too bad your monitor died at the end.
Hey Richard,another great video!Very interesting to see the older style of balance bridge and balance in these vintage Rolex watches!😮❤❤❤❤❤
Hi Richard. I found a beautiful Patek pocket watch at Bogoff. It’s from 1924 and 18k for $5400. If I needed servicing in the future, could you work on it or should I take it to Patek?
Your attention to detail is impressive, especially not scratching everything in sight!
Hi PUREBLOOD.. I think working on a watch is like visiting a beach. Whilst there you should enjoy it but you should make sure you leave no trace of you having been there. Thanks for the feedback. Richard
When is the final part coming? Thank you for great entertainment and skilled workmanship, amazing
Not qite sure when I am releasing Episode 2 but favourite is next weekend. Stay tuned! Richard
One of the best vids you’ve done ever bro, so concise and clear! Bravo !
Excellent video and very well presented. Can you let me know what solution/s you use for cleaning the parts?
I was surprised to see rolled links. Also surprised by the quality of finishing on the movement. Enjoyed the video. Well done Sir!!
Yeah, one of the downsides of some of the vintage Rolex watches is that their original bracelets were pretty trashy compared to today’s standards.
I do enjoy your videos, but this one was especially good. They are much better when you narrate them all the way through. Keep up the great work!
Thanks for another great Rolex resto video! Always enjoy watching these old beauties get refreshed!
Happy NewYear Richard! As any soldier knows you can always call in Air support...well Amazon support anyway. ;-)
Happy New Year Richard, thank you for sharing. Kind regards
Loving the narration Richard. Adds a whole lot more interest to the video. Happy New Year.
Thanks Steve ... I like doing the narration but have had it in my head that the almost silent videos do better. We shall see I guess! Richard
Great work man. I love these videos and the descriptive commentary.
Hey, Richard. Thanks for the video! I have a question about the wheel you removed with your modified tweezer tool (driving wheel I think?). Does it come off of the pinion for the third wheel and then is friction fit back on during reassembly?
Hi joejunk... Yes it is as you describe. The wheel is friction fit onto an elongated pivot if one of the wheels in the going train. Hope this helps. Richard
Nice job Richard! I’d like to make a tool like you did for the 5 spoke wheel. Can you say more about it so I can replicate or could you make a short video on it! Re ultrasonic cleaning, how long do you do each clean for in the ultrasonic? What cleaning and rinsing and IPA do you use? I also use an ultrasonic cleaner and struggle to get good consistent results. I use Elma fluids and do a clean and 2 rinses all 20 minutes long. On very dirty watches I do a pre clean with peg wood, rock o and essence of renata with cotton buds. Sometimes if parts still come out a bit dirty I use Renata again. Cheers, Boyd.
Thank you Richard for your gift: a video to starting great the new year! I really hope to see the end of it soon. your workmanship it is a constant that manifests trughout all your videos. Really hope to see you "live" in the future. Stay safe! I wish you a wonderful 2022! Cheers from Italy.
The base plate has holes in it specifically to allow access to the pallets in order to add lubrication... wondering why you don't use them?
IHi Steve ... I think the answer is in the video. I like to dunk the whole fork very briefly in alcohol after lubrication as I think this gives the best results. This is not possible when the fork is attached to the movement. Hope this explains. Richard
i used to wonder where is the 1st wheel in the train of wheels.....thank you for letting me know that it is the mainspring barrel (@13.06)
The hidden wonders of horology! Glad that was helpful Dr D r! Richard
happy new year Maj Perrett......may you and your channel keep ticking happily....just like the watches you restore
Hi Dr D R ..... Thank you so much! Happy New Year! Richard
I never saw a rolled link Rolex bracelet until now. Nice work on this watch. Beautiful 12 hour movement.
HNY! Great video and excellent commentary explanations along the way. Very educational. Looking forward to watching more! I wish you all the best.
Very nice detailed descriptions and very professional...Happy New Year
Hi Speedy Checkmate ... Thank you so much! Happy New Year! Richard
Thank you for answering a long-standing question.... I noticed in your other videos that some of the Rolex wheels are pink/purple & got the answer @ 9:27 - Teflon! 👍 I assumed it was more than just a decorative element like the blued steel screws, so really interesting to see Teflon being used at such a fine scale.... looks like it might be used to allow even finer tolerances in the separation of moving parts. Intriguing!
Thank you for your videos, you really speak and gently and easy to follow.
Mindbogglingly fascinating!
Great video Richard even with the camera issues. I'll be looking for your next video my friend. Thanks for sharing take care.
Happy New Year Richard. I always enjoy your videos.
You seem very thorough . Good job
Happy New Year!
Nice work as usual. I was wondering why those gears are purple. I thought it was just for style and had no idea it was Teflon. When "Big Problem" popped up when replacing the balance, my heart skipped a beat! 😳😁🤣
Thanks for posting another enjoyable video.
I always wonder how Rolex's in particular end up with so much damage on their dials and hands. The brand constantly shouts about the water proofness of oyster cases after all.
What do Rolex people do with their watches, use them as hammers when they can't be bothered going to the shed ???
Good start to 2022 there Richard...I'm really going to have to sort out my SuperOcean.
Great cinematography as ever 👍👍👍
I love the way you advertise your watch brand, fantastic
Happy new year Richard, the air king is a smashing watch, honestly you bring my youth back to me standing over my uncles shoulders watching him repair watches, your a joy to "watch" 😉
When setting the time should the hands move clockwise or anticlockwise when turning the crown upwards?
Question?
Why do you use the ultrasonic cleaner and not the cleaner with water ?
I’m just curious.
Stem removed at 2:10 but back in at 2:15 ? Did you put back in for any reason ? To release energy ? Cannot buff the scratches out of the glass ? Way to gone ?
I was looking at the two screws for the automatic works,the threads on them appear to be rolled rather than cut.Can you confirm this Richard?It would at least satisfy my curiosity....................................
Your explanation of your movements are very easily understood and I've learned alot from your videos. Thank you sir.
Happy New Year - Thank you for your videos.
That was amazing. I would forget how to put it back together.
What a lovely new year's day surprise. Thanks for the video Richard and have a great year.
A Happy New Year to you! I enjoyed your video's very much and I most certainly will keep enjoying them in 2022.
Hi 1959Berre! Thanks fo your engagement sir! Happy New Year! Richard
Happy New Year Richard! Wishing you health and happiness.
How was the barrel arbour hole in the bridge? I noticed that the cap had wear on it.
Congratulations on the new piece of kit.
Hi Peter! Good to hear from you sir and a Happy New Year! I need to take a look at the footage and answer your question! Richard
Hello Richard, is there a problem in ultra-sonic washing some parts (balance spring, palet fork) as these sometimes include pasted parts....? I have read that somewhere...Best 2022 wishes !!!
Rolex movements is a joy to watch, solid and beautiful, one day I'll work on one! Nicely done, great watch! Happy new year!
I will certainly get in touch with you when I am thinking of buying a watch.
Happy new year from Penrith hope it isn’t too hot at the dock! Any signs of previous fettling or do you think it’s been untouched since it left the factory?
Hello Richard, great video. Would you be so kind as to tell the reference of your caseback opening tool. Thanks
Thank you for a wonderful tutorial.
Great video as usual Richard, nice little Air-King, it's a pity all movements with high jewel counts arn't decorated with engine turning it looks really good, but i suppose it would put prices up. Thanks Richard Happy New Year to you and family.
Happy 2022 Major! Some very good close up images in this video--felt like I was looking through a microscope. Looking forward to watching episode 2 with the new display screen.
Hi Paul ... Thank you so much! I will be posting episode 2 with a day or so! Richard
New year greetings Richard. Thanks for the videos.
Happy New Year Culture Vulture! Richard
Have you considered uaing the thin plastic celophane they use to package cd's and dvd's? I come across it eegularly but havent tried it yet.
Thankyou Mr P! Another great video of a quality watch refurb! Looking forward to the next...
Happy new year Richard . Good job and great looking watch
Happy New Year! "care is required, oops dropped it"! Vintage watches are my favorite, beautiful watch.
Air-Kings are severely underrated watches.
Happy New Year , load with lots of videos
Happy New Year Sudeesh Patteri! Wishing you a really good 2022 sir! Richard
Happy New Year Richard! Absolutely love the simple layout of the running train on this beauty 🤌
Hi JSG Watches... Yes, its a little 1890 pocket watch really with a few refinements! Whats not to like?! Happy New Year! Richard
Excellent. Can't wait for part 2. Happy New Year
Thanks for another fantastic video, much appreciated! Question, at 11:00 you mention 3 cleaning solutions you use in your ultrasonic cleaner. Would you mind going into greater detail on the three solutions? Many thanks!
Hi BDC C ... Sure www.cousinsuk.com/product/lr-566-watch-cleaner and then it's own rinse followed up with isopropyl alcohol. Important - No heat in the ultrasonic! Hope this helps. Richard
@@richardperrettwatchmaker Brilliant, thanks Richard!
Good health,
Curt
Nice video as always Richard! How often should one service this movement?
I think Rolex wants you to do it every 2 years, but of course they would.
Hello Richard. As a long time collector who recently took up watchmaking I appreciate that you are using some less expensive watchmaking tools us hobbyist have access to. When I started getting into the watchmaking side with basic movement services, many professionals chimed in on the tools required including a ELMA or L&R cleaning machine that spins the movement parts in a solution. They seemed firm on that for a proper parts cleaning. Like many watchmaking tools theses machines can be pricey for the home hobbyist. I appreciate you as a professional watchmaker still use a affordable tools like a ultrasonic machine. I also seen some of your other video's where you are using Stella brand Italian made tweezers instead of Dumont. I'm sure you buy more expensive Bergeon or Hortec when justified but go a bit more economical on things that you can. I would like to see you make a video on what tools a beginning watchmaker needs vs required for a proper job starting out. Thanks.
Hi 24 Hour GMT Channel ... great feedback thank you. The importance thing is what a tool does as evidenced by the result. Ultransonic cleaners are great I think. Perhaps more importantly so do some high end watch brands who specify their use in the latter stages of cleaning. These days I tend to use steel and brass tweezers which I customise the tips of to my liking. Thanks again. Richard
@@richardperrettwatchmaker Yes sir. Very true. It does appear that like watch brand snobbery, not surprising there is a bit of snobbery on the tool side as well. Thanks.
@@24hourgmtchannel64 Just keep in mind that an ultrasonic cleaner offers a _different type of cleaning_ to those 4-stage pro machines.
An *ultrasonic* is a gentler (and more forgiving!) option because it's using small waves to _knock dirt off without moving the parts_ (like a dishwasher)... it's a cheaper machine but you still need to manually do rinse & dry cycles.
Those *4-stage cleaners* _move the parts through the solution_ to get a deeper cleanse (think top-load washing machine).... but they also clean end-to-end. Most pros & long-time hobbyists I've seen use a combination of both... ultrasonic for the case, band & sometimes the whole lot if it's not too rusty/dirty.... 4-stage when they need some heavier cleaning.
It's important to understand the context & the reasons why certain tools (and even certain brands) are recommended.... not just assume it's 'snobbery' because they cost more. I've managed to collect numerous watchmaker & jeweller tools over the years which I use for completely different purposes in other hobbies, because they are perfect for doing specific (and usually very fine) jobs. Use what works for you! 👍
Good video Richard, very informative. Too bad your monitor stopped cooperating. Hopefully you'll show us how it all ends once your new equipment is sorted. I always like to see the final numbers on the time grapher.
Happy New Years
Cheers
Happy new year love watching you videos and you have some skill with watches did you go to watch school or self taught
Thank you so much Robert! Self taught ... I was a military engineer working on Main Battle Tanks in my 'former life'. Happy New Year and thanks for the feedback. Richard
@@richardperrettwatchmaker I am military will have completed 22 years in September I’m a driver by trade in logistics I like your major watch you have made it’s cool all the best for this year and keep up with the content you have some skill in what you do
Happy New Year! I love watching your videos, and I've learned quite a lot. Thanks
Hi Richard, another great video!
18 months ago I bought a new Rolex Submariner with a gold inlay blue bezel and central gold links, (£11,250) from the Leeds main Rolex dealer. Everything is perfect but the dealer said to service every 5 years. Is that what you recommend as I will probably be sending it to you? I'm retired and although worn daily, is is not subject to any workplace environment, just looking pretty on my wrist.
Hi Will ... If everything is perfect I would not have it serviced for a few years yet personally. Much as I would enjoy having your watch I do not think from what you say now is the right time. These pieces are very well made and you are good for another two or three years at least unless you start to see any symptons of reduced performance. Hope this is helpful. Richard
Never a dull moment, eh Richard? Happy New Year!
I have enjoyed a number of your videos and one of the things I like is that you’re not wedded to the use of expensive equipment, eg: hand levers from India, ultra sonic clean
Nice video, thanks. Always wondered about those purple dials.
Thanks David ... is a frequent question so I though I would answer it before it was asked this time! Thanks for the feedback. Richard
Happy New Year Richard !
Those 70s airking will never get old 😍😍
Sorry, it's been a while since I've checked in! These Rolex tool watches were so purpose built, but their prices are absolutely out of sight for most normal folk. I've wanted an Exporer I for ages, but there's no way I'm shelling out the prices they are asking now. Anyway, this Air King is in good hands, and about to be seen in a totally different way with your new camera/scope setup. Cheers.
Hi Clay... Great to hear from you! Richard
Fantastic video Richard and lovely time piece to work on. You make it look so easy. Happy new year.
Haha! Thanks Paul! Happy New Year from Wales! Richard
Thanks Richard and a very Happy New Year to you🚒👍👍
Which color is this dial? I have the same one but ref 1002 Air King with a different written ``A`` in Air King. It looks Like a little bit purple. It is a rare dial? Thank you
Happy New Year Richard, great to see the close up camera work & nice to hear the running commentary again, very descriptive & helps us " mainspring monkeys" with identification. Looking forward to part 2 of this video. Regards from along the coast @ Llantwit Major
Possibly the wiring harness going into the back of the LCD has become faulty. A common problem on that kind of screen on a Canon EOS M3. You will easily be able to change the harness with your skill set. There are vids on You Tube on how to do it.
Hi Juanita M ... my thoughts also. I show an attempt at resolution in the next episode! Thanks for the feedback. Richard
Super vidéo! Est-ce que tu as des livres a conseiller pour s'instruire sur la restauration de montre?
Love your videos! Do you service watches too?
Hi dave ... yes I do but my repair bookings are full at the moment! Sorry if this isn't helpful but it does I guess answer your question at least. Richard
Happy new year, nice video!
Is there any risk for the jewels, running them through the ultrasonic cleaner, by cleaning the entire main plate and bridges? Wondering if they could fall off?
Most jewels are fixed pretty solidly in their sockets in the main plate & bridges, and watchmakers ensure that any jewels that can be removed are secured by their little Incabloc clasps before they put them in the cleaner. But if a jewel does fall out in the ultrasonic machine it will either stay in the 'tea strainer' with the bridge or (worst case) fall to the bottom of the tub. Either way, Richard can re-fit them or order replacements if they do break.... it's amazing how robust these little timepieces are!
@@medea27 thanks for the response, much appreciated.