Great video, bro. I've got to get me some of that EDCI. And one of those mats. I'm a little ocd about where and how I put stuff when I'm doing my knife maintenance. Most of what I use is about the same.
Thanks Bryan. Some great kit there! I always advise newer knife dis-assemblers, to use the 4mm drive bits. Which by default, have then using smaller driver handles. Which in turn gives them less grip, when putting teeny tiny screws back into the knife. Their #1 issue, when putting knives back together with 1/4" driven bits, and larger bit drivers. Is stripped screws. : - )
Great video Brian, I appreciate the cleaning tips! Ive been waiting for one someone that I follow to do a knife maintenance video! I’ve been wondering what are the best cleaning products to buy for knife maintenance, now I know, 👍🏻!
This video was really educational for me, since i also have a 0562ti and was curious to take it apart.... need to get som KPL i think, to try something else than WD40.... I really dig you don´t do "retakes", hop i the video. Thanks ALOT!
I've recently learned that there is a large black market for these knockoffs/fakes and in my research have found that some ways to distinguish real from fake is the steel insert on the release and the different bolt sizes on the body vs the one on the clip. Are there any other tips you may have?
Thanks for sharing the knife care tips and tools. ZT 0562TI looks like a very nice knife.
Knice video. I love the 0562 design enough that I picked up both the CF version and the Black Ti murdered version.
I too love the design. Love my 0562CF. Had one, gave it to a friend and missed it so much I got another one.
Thanks for doing this video. It was really helpful both in terms of technique and what products to use.
Great video, bro. I've got to get me some of that EDCI. And one of those mats. I'm a little ocd about where and how I put stuff when I'm doing my knife maintenance. Most of what I use is about the same.
They’re great. And for like $10.
Have most of your tools, but the EDCi is something I need to get ASAP!!!
Thanks Bryan. Some great kit there!
I always advise newer knife dis-assemblers, to use the 4mm drive bits. Which by default, have then using smaller driver handles. Which in turn gives them less grip, when putting teeny tiny screws back into the knife. Their #1 issue, when putting knives back together with 1/4" driven bits, and larger bit drivers. Is stripped screws.
: - )
I really like my little stubby wiha 09BO700 that holds the bits in the handle for more stubborn screws.
I've had one of those in my Amazon cart for like a year lol
Thank you!
I'm slowly collecting the proper tools. thanks for the insight into what I still need to get (besides the knife). :)
Nice job !!! Thanks
Grease on bearings 🤔. Hope you had a good Christmas Bryan best of luck in the new year!!
CONTROVERSY!!! lol
Great video Brian, I appreciate the cleaning tips! Ive been waiting for one someone that I follow to do a knife maintenance video! I’ve been wondering what are the best cleaning products to buy for knife maintenance, now I know, 👍🏻!
Follow Nick Shabazz... he takes apart every knife he gets ....
This video was really educational for me, since i also have a 0562ti and was curious to take it apart.... need to get som KPL i think, to try something else than WD40....
I really dig you don´t do "retakes", hop i the video.
Thanks ALOT!
I've recently learned that there is a large black market for these knockoffs/fakes and in my research have found that some ways to distinguish real from fake is the steel insert on the release and the different bolt sizes on the body vs the one on the clip. Are there any other tips you may have?
I bought the cf version. I have no idea why they didn't skeletinize the steel liner. I may have to skeletinize it my self.
Bro blade cmp 20,how much bro buy
Nanch precision driver with Wiha bits is what I use. Just based off of what I’ve seen it’s better than the ifixit
I’ll check that out!
I have a 0562cf and I cannot break loose the pivot to save my life. Any suggestions because I really don't want to mail it in.
Free spinning pivot - Get a t8 on each side and gentle crack it loose
Nice kit
I have occasionally used 3 in 1 oil to breath life back into G10 but from the looks of it the mineral oil does a better job of it.
Cool thx
Whats your experience with bearing wearing off titanium?
You should probably at least watch the whole video before you go writing this question on every 0562 video on YT
Nice Johnny Dangerously reference. :D
Was totally accidental.
Smells like a donkey’s ass had me crying 😂
「コンテンツを調整する必要があります」、