Thank you po engr. Ask kolang po if pwede ba gamitin ang pressure head dito sir.. At pwede po suggest ng same problem pero pressure head approach ang solution.? Salamat po. Napakalinaw ng explanation at animation. 🎉🎉🎉
Good Evening po. :) Pa-clarify lang po. Pag pressure head kasi diba Pressure/Gamma po 'yon? So far wala pa po ako naeencounter na pressurehead po yung gamit. Pero pressure diagram pwede po. :)
Sir putsi ko po ba ito e apply sa gate na kung saan 2 liquids sya, then hahanapan ng force para masira ang gate, so puydi po ba sir na ganyan gawin ko para iisang force nalang makuha ko para mag moment?
@@EngineerCruz I forgot to emphasize sir na the gate touches 2 liquids po will it be the same result? I checked it but i can't get any answers sa choices
Good question! Usually vertical height ang hinahanap diyan sa mga ganyang problem. Pero pagdating sa board exam, as much as possible i-check mo BOTH kung yung slanted height ba or vertical distance ang pinapahanap. For sure, isa lang nasa choices diyan. :) Pero yun nga, yung usual is yung vertical distance lang hinahanap. Pero good question yan. :)
engr, sa class po kasi namin, naging uniform na po na convert to water palagi when it comes sa mga ganyang problems po. Nag same naman po ng sagot sa problem na to with this method. Magkakadiscrepancy po kaya to pag sa ibang problems?
Napaka underrated niyo po, you deserved more followers. Maraming salamat po, ang galing niyo mag explain!
Awee. Thank you so much, Engr! ☺️❤️
up underrated mo ner! power
Thank you so much, Engr! 😊
galing, sa indeterminate structure and deflection din po sana engr.
Sure, Engr! Soon!!!
thankk youuu po, Engr.
God bless!
thank you po, engineer!
Welcome, Engr! ☺️ Good luck! 💪🏻
@@EngineerCruz Suggest ko lang po, engr. sa next upload nyo po ay about naman po sa Moving Vessels hehe. Thank you po.
Thank you Sir
thank you sir, vid naman about purlins.
Hi te
@@twixx-ky1ql sino kapo?
Thank you, Engr! Sige po. Gawa po ako soon. 😊
Sir baka naman pwede niyong ring ituro samin yung 3ME and titanic method ☺️
Ayan fave method ko! Sige soon turo ko. ☺️
Baka po meron na din kayong vid tutorial for 3reservoirs?
Soon! Gawa ako! Basic lang yan. 🤙🏻
Pwde po gawa ka ng tutorial para sa footing, steel design, at rotating vessel kasi malapit napo yong exam tapos di pa masyadong na gets yong concept.
Will do probably soon! Super tagal nang walang upload sorry huhu. Have been handling 2 sites at once.
@@EngineerCruz thank you, neer! Ang galing mo magturo patuloy molang yong pagtururo para madami kapa Po matulungan. Sobrang solid niyo Po magturo!
Thank you po engr. Ask kolang po if pwede ba gamitin ang pressure head dito sir.. At pwede po suggest ng same problem pero pressure head approach ang solution.?
Salamat po. Napakalinaw ng explanation at animation. 🎉🎉🎉
Good Evening po. :) Pa-clarify lang po. Pag pressure head kasi diba Pressure/Gamma po 'yon? So far wala pa po ako naeencounter na pressurehead po yung gamit. Pero pressure diagram pwede po. :)
Sir putsi ko po ba ito e apply sa gate na kung saan 2 liquids sya, then hahanapan ng force para masira ang gate, so puydi po ba sir na ganyan gawin ko para iisang force nalang makuha ko para mag moment?
Yes pwede po, Sir. Wala pong problema diyan. Basta naka layer yung 2 liquid. Pwede mo iconvert into one or derecho PcgA na. 😊
@@EngineerCruz I forgot to emphasize sir na the gate touches 2 liquids po will it be the same result? I checked it but i can't get any answers sa choices
Pwede po pa explain ano process nong number 3? Tas pano e analyze yung distance niya from the bottom. If naka slant ba or directly above
Good question! Usually vertical height ang hinahanap diyan sa mga ganyang problem. Pero pagdating sa board exam, as much as possible i-check mo BOTH kung yung slanted height ba or vertical distance ang pinapahanap. For sure, isa lang nasa choices diyan. :) Pero yun nga, yung usual is yung vertical distance lang hinahanap. Pero good question yan. :)
@@EngineerCruz thank you po engr! baka po may vids ka din para sa hydrostatic forces on curved surfaces
engr, sa class po kasi namin, naging uniform na po na convert to water palagi when it comes sa mga ganyang problems po. Nag same naman po ng sagot sa problem na to with this method. Magkakadiscrepancy po kaya to pag sa ibang problems?
Pwede naman yun! Kaso lang mej hassle. But can you send me your solution that you converted the liquid into water first? ☺️
@@EngineerCruz okay na engr! medjo di ko pa gets yung concept nung nai comment ko ‘to. Thank you so much 💗
Engr Orifice po😄
Sige, Engr! Gawan natin. 👌🏻