We Used a CHAINSAW to Install NEW LIGHTS
Вставка
- Опубліковано 7 жов 2024
- Hey Gang. First, we want to disclaim this video by saying you DO NOT need a pole saw to install these lights. They are extremely user friendly! But as you guys know, real world isn't perfect, and sometimes you have to adapt to a situation! We had a lot of fun on this one and want to thank Cooper Lighting for partnering with us. Thanks for the support and we'll see ya in the next one.
#halolighting #bringhalohome
@gethalolighting @bringhalohome
PO Box: 7516 Bluebonnet Blvd box number 439
Baton Rouge, LA 70810
Support the Stud Pack boys here and grab a Hat! (New Merch coming soon!)
studpack.com
Head to www.cooperligh... for any of your lighting needs on any project!
Contact: Studpack225@gmail.com
These guys have helped me to save a lot of $$; I've canceled my Netflix, Amazon Prime Video, and Hulu subscriptions -- THIS is content!
Yes it is Content !!
I can't get through a video. I find the guy a bit annoying. I just fast forward to the part stated in the title
@@lostintime8651 They are just common Hard working people that enjoy their work and thought they would share it and make some money of course.
@@dereksellars , I like to DIY whenever possible. I've gotten what I consider to be very good info from this guy's vids. His son is fortunate to be getting such a high level of training.
That's nice but I haven't convinced my wife yet to watch this so Netflix remains
I knew this day would come. Sponsored content. They made it big time!!!
TIP: when you use the screwdriver to put a small locator hole in the ceiling use that swivel driver that you use on the plates. You can easily spin it sideways to feel for the joists of obstructions. It keeps the hole small. Good thought process in the lighting layout. Nice install!
Since I've actually had to cut boards with one of those pole saws, I about lost it when you pulled that out to get the job done lol.. That's a real contractor being resourceful and getting the job done..
From Louisiana here, MUCH Respect for the Attic work right now!!! Its CRAZY HOT Lately!
Say that again! 🥵🥵
Stud Pack is like a modern version of This Old House but not so modern that it's over produced. Just the perfect balance to get my nostalgia fix.
We haven't used a can style recessed light in years. The flat LED style makes worrying about rafters obsolete. They're only 1/2" thick and can clear rafters 95% of the time.
with regards to your better hole cutting tool, most any competent machinist should be able to make the bits that you need. I suspect they were carbide, as they would be far less susceptible to wear from the drywall and breaking when it strikes a beam. A tool steel answer would probably be pretty good, just requiring some honing from time to time. Hopefully you found the real source. Great video and probably the best promotion of a lighting product of its kind.
I think the are High Speed Steel (HSS) not carbide. 1/4" or 3/8" HSS sharpen on a bench grinder to the needed shape. It is basically a trepanning tool for sheetrock.
I can personally vouch for Cooper lighting. I've installed dozens of their fixtures. My favorite things about them is selectable light color (customer loves it too) and easy installation.
They're awesome! We've been using their stuff for years! So partnering with them is super exciting for us
Hilariously resourceful!! Perfect out come for not having your skillsaw or reciprocating saw available... you two are so witty and funny while getting a fantastic result, I always look forward to your next creative endeavor!!
Hey guys! Love the videos! Here’s an extra tip when you poke the hole in the drywall to check if you’re clear. Take any wire the size of the hole you punch with the screw driver, and bend it into a 90 degree elbow. Make sure the wire is slightly longer than the radius of the light, and stick that end up through the hole. Take the remaining side and twist the wire around 360 degrees. If there’s something in the way, the wire in the attic will hit that object and let you know where it is. May save a trip up in the attic!
I am all about symmetry and love how much detail you put into laying out these lights! Paul, I gotta say, I love watching your videos and how well you explain and educate viewers. You make a great teacher! Now Jordan just needs to do more work😉
So much brighter!! Fantastic work guys!!
I really like those Cooper Lighting Halo light packs! I’m 65 now, don’t know how much more mid summer attic work I have in me(respiratory and cardiovascular issues), but I’ve done my share of DIY electrical, HVAC, etc. I usually will place a box fan in the attic opening to either pull or blow cooler(ha when it’s 100 outside and 130+ in the attic it’s still cooler air) through the attic space. A dry clean dust brush, paint brush or even a soft bristle broom sweep will fill the drywall dust halo around where the less expensive cutter left the mess. If you still have at least one complete cutter for the better drywall circular cutting rig stop by a couple of local welding and machine shops to see how much they’ll charge to make you some extra cutter heads. Nice job. And, as for the pole saw, sometimes you just gotta do what you have to do thought I was a bit concerned on one of the cuts shown where the chain saw blade was so close to your Romex. You would have been sick and aggravated with yourself had you cut it.
Good tips thx Mitch 👊
Hell yeah!!! This was a great video. Jordan kicking ass on drilling those holes. Get’em boys!!!
Thx Nicholas 👊
I LIKE THAT WHERE U CAN ADJUST THE ANGLE. HALO LIGHTING LOOKS REALLY GREAT
I was already a subscriber but happened to be on the Cooper Lighting website researching some Halo fixtures and saw a link to this video. Great job, guys, all around! fyi to anyone looking at Halo fixtures for residential -- I've bought a few different canless versions for my home and the least expensive model didn't come with the integrated NM cable clamps mounted on the box as shown in this vid. So I needed to use the knockouts and supply my own clamps. Also, that particular model I bought came with wire nuts, not the push-in connectors. Sorta minor, I know, but might help some DIYer understand what they're getting.
The wafer can lights are nice, i prefer the ones with the batwing attachment to the rock…. None the less, they have made remodels so much better than old work can lights
Great as always. You know its a good channel when I watch you do what I do all the time and still enjoy it. Never boring, never outlandish. Just good and smart.
here ya go guys!!!! this channel is blowin' up and very happy and excited for you guys!!!!!!!!
Those lights are really nice. I'm going to purchase some and start my own little project at home Thanks guys..
You guys are absolutely amazing!
Great Father & Son Team
Happy Father's Day Paul!
Thx Jim 👍💪
Hey, here's an interesting tip for ya. I work at an HVAC company that focuses a lot on air quality and air flow throughout the home. One of the biggest heat and AC losses comes from those holes in the ceiling for lights. If you seal them by caulking or with closed cell foam, it will save the home owner a lot in lowered energy bills. Another big one is the holes you cut in top and bottom plates for electrical wiring. It basically creates an airflow stack effect that shoots a bunch of heat out through your attic in the winter, or allows a lot of heat to come into the house in the summer from the attic. Anyway, I love the level of craftsmanship you strive for, and thought you might appreciate this.
Also, I live in Washington right near where you worked on your future son-in-law's home :)
Awesome thx Jack 👍💪
I look forward to a new video everytime I open UA-cam you two are absolutely amazing so glad I discovered your content you two absolutely crush it! Keep up the good hard work can’t wait for more videos!
Paul, for a recessed light I’ve used a very cheap long screw driver which I bent at a 90 degree with a 4inch length…..insert into ceiling, push up with handle parallel to ceiling then push handle perpendicular to ceiling with the 4 inch 90 then running parallel to ceiling on back side of ceiling…..then and rotate 360 degrees and if you don’t hit anything you know you’re good to drill a 5 inch up to 8 inch hole etc. Great tutorial and better results. Talk about a “make it work” obstacle to be overcome……pole saw, hand saw, band saw, man saw, don’t matter y’all….cause StudPack gonna get the job done.
Great tip thx TJ 👍👊
LOVE IT GUYS... THANKS FOR THE SHOW
His camera work isn’t that bad!! Also who’s picking the music? I love it.
I also give props to your pop. I start messing stuff up when I’m on camera. My school was always recording me cause I was doing a huge project for them. Eventually i got wise and did all the hard stuff before they turned the cameras on
Great job on the crown trim, that looks sharp
Those lights look like great products and have the installer in mind.
Good job on the lighting, and your explanation of where to locate cans. Im an electrician, mostly residential service work, and I have that conversation with customers a few times a week. Put the light where you need it!!! That’s what cans are meant for.
Check out the Rack-a-tiers dust bowl for catching the dust.
Luv rack-a-tiers stuff and website 💪
I have that same hole cutter- it is nice when its working properly
Super sleek am always looking forward to watching the series 👌. The knowledge learnt from here is beneficial to my practice as an architectural designer and an entry contractor.
Thanks for being a team player Cooper Lighting!!
almost time for floors!! i’d like to see your all’s take on 3/4 in. hardwood floor install. great video
Great video! You Guys in NA have it so easy. We live under rocks,concrete and bricks in Europe. My concrete ceilings are very scary...just mounting a light fitting is very hard drill action...
These guys do great work and great entertainers as well keep up the great work
Yes, 3000k for lights! Too many people set these lights to 4000k+ and it makes everything look awful. 3000k is a good compromise between daylight and soft white.
2400K. Guy still.
I used to be in the 3000k club, but now I'm in the 2700k club. Warmer colors make houses look more inviting, more comfortable, and just all-around better.
@@mr.g937 I've been in the 2700k club for a while, but remodeling my kitchen to a white/grey color scheme made 3000k work much better. Still, when I can't get 3000k (like Philips Edison-style bulbs for my island pendants), I'll choose 2700k over 4000k any day.
Even better, white-tunable smart bulbs that can automatically adjust from 2000K to 6500k.
Love the channel. I've installed 4" Led pucks myself, but didn't have a pole saw nearby :)
You guys are funny & do excellent work @ the same time. 😀
Thx 👊👍
The lighting does look awesome. I have to give it to you. Good job Stud Pack!
I have an issue with Cooper Lighting. We installed 41 of their COB LED lamps and drivers. Ten years later they are beginning to fail and the driver and LED's have been discontinued and I cannot for the life of me find a replacement that will work. Neither Platt nor GraybaR could find anything other than residential model LED's that can't be fitted with flexible conduit. I'm glad they comped you the lights which appear of good quality. Thanks for the great channel Paul.
Just use a stud finder to help in your layout ,no holes.Thanks for the video.📐🔨👍🇨🇦
OMFG. When the pole saw comes out... Go get some lil buddy!!!
Love these videos. I so wished my attic was that big.
Mooomm ..Dads in the attic again and he's up there with a chain saw ..
Get these guys to 100k like right now!
I have the same cutter. its the best one. Most electrical supply houses will have blades for it.
full send bro never lift! weekend vibes!
Go to Amazon (of course) put in drywall hole cutter and 15 or more cutters come up. Many are built just like yours with a bearing sleeve in the plastic cover. Priced from $19 to $100. Most with replacement blades available.
Awesome video guys! Way to use the tools that you have! Super happy for your sponsored products now!
WOW another great video I love how you think outside of the box that's how it goes in construction I have been there many times myself i get so excited when I see that you have another video out keep up the great work and as always GOD BLESS YOU 🙏 GUYS
Great video, guys ! Just did an install with these lights, they went in easy, Great lights, that pole saw was a barrel of laughts! But it got the job done!!
Always a great day when you guys post a new video! Love the explanation, attention to detail, and great editing on the video itself. Nice!
I feel some much better knowing that I am not the only one has has performed surgery with a pole saw.
I have one of those hole cutter
You can still buy the blades for Labor Saving Devices
Great Video! Seems like whatever tool or fastener you think you won't need (and leave at home or on another job site) is the one you will need! I've used a pencil through the loop (on the little spring on the housing) to install the can light moulding.
Good job guys another great video you have a bright future here on UA-cam and your work speaks for itself.
Love those Halo 4 inch LED lights. I've used their 4 inch gimbal LED lights that are direct ceiling mount like the the standard 4 inch lights, but you can tilt the light to make it point straight down. You guys are great and a joy to watch
Thx Mark 👍👊
As you suggest, proper layout is critical and obviously time well spent. Having said that, it always seems that the perfect position for a fitting corresponds with a ceiling joist. Battens can be worked around but not so easy for joists.
Upvote because you know what a Rocketdyne F-1 Engine is. Nahh.. Love watching you guys. Having worked in Nawlins doing some construction BK and AK, I know the heat is a killer sometimes.
Thx David. F1 engines were tested in Mississippi just north of I-10 at Stennis Space Center. The I-10 bridge over the Pearl River is so high so that the barges carrying the F-1s could get under it 😳
good stuff
BTW milwaukee makes a mini chain saw...you might need it next time
Measure the cutter bits for that thing and post them up. I have some tool steel from a lathe I had sitting in a drawer. If I have some that is the same size, then I'll send them to you. Fifteen minutes in front of a bench grinder with the old one as a sample should net you a usable bit.
Love the ingenuity to minimize your exposure to that heat in the attic to use what you had available. Sometimes you gotta do what you gotta do and using a handsaw up there is a hard pass.
Cheers from BR fellas 🤘
Love the Halo lights - such a well-engineered product. Question: after my contractor left, I went to adjust the color temp on the lights to a warmer setting. I found one box loose just sitting on the ceiling drywall (there's a second floor above, so no insulation). Is that a concern? They don't seem to run hot and it would be a PITA to try to attach it to the joist througha 4" hole.
Worth waiting till the end. 👏👏
I wish you would have done the recessed light setup in my kitchen☹️. Brand new build last year. And all the can lights are set so far back that they basically just light up the tops of my cabinets. Thank goodness I have under cabinet lights.
Three words: Radiant Barrier Foil - makes a world of difference and would be so easy-peasy on that attic! Another great video in da can LOL!
Thx Cathie👍
These guys are the best!!
I love these easy installed lights. I agree with you usability versus aesthetic and the balance between them. Be nice just to have a vacuum to suck up the dust too otherwise it will set off the smoke detectors. Don't ask me how I know.
The lighting turned out great! Well done.
Hi, Not sure if anyone has answered on your old hole saw but it looks like the Hole Pro X-305 and they do sell replacement blades for those on Amazon. I enjoy your videos keep up the good work.
Lighting lay-outs for recessed cans could be such a pain in the ass. Wafers make installs 1000% nicer. Not only in ease of lay-outs,but, you can often wire without crawling all through the attic. The world of LED makes concerns about lighting loads a minimum now days. Paul.. another great vid on general lighting and so glad that you took the time to emphasize terminology such as IC and AT ratings. Looking forwars to when you outline CRI and how the the Kelvin scale applies to paint scheming and tints.
Thx 👊💪
You can save time going into the ceiling/attic by bending a piece of wire to the size of half the diameter (radius) of your hole saw and then poke that into your hole and twist it around while moving it up and down to see if it hits any noggins/beams/trusses
Get a lil bit of steel / wire like a brick tie bend it into an L shape, stick it up in the center hole and spin it around also push it up and spin it around. I would easily install atleast 100 a week using this method.
👍👊
G'day guys. Big support for your channel here. Wish that Cooper had a range down here in Aus. They looked high quality and a breeze to install. Really great content and always getting better 👍👍
Great content. Thanks for the vids
love your videos mate! Im a sparky in Sydney Australia watching, enjoying your vids. quick tip .... use a fibre glass ladder. Keep up the great vids!
You guys are amazing! Thanks again.
It looks like it might be Amartisan Hole Cutter is the brand of ceiling hole cutter. the set is $64 on Amazon.$10 for set of replacement blades.
Another Great video !!! I do stuff like this on the side from my regular job and I just love watching you guys !! Thanks !!
It is relaxing to watch :):):) Thanks again :):):)
If you think ahead. You could install slope lights before drywall.
Making it up as you go.
STUD PACK merch.. Black light velvet posters.👍
Might have to explain it to your son how cool that is.😁
🙂✌❤
There doesn't seem to be a project you boys can't handle, pole saw and all, lol. Great video Paul and Jordan with an awesome finish, that lighting looks outstanding. Remain blessed and keep the great video's coming!!!!!!!!!!!
Great content no fluff and to the point
23:30 That chainsaw is thinking wood is wood, either in tree form or as a board. Let's do this!
I’ll take an autographed Stud Pack poster for my gallery. Thanks!!
I used HALO'S last spring in the living room....EASY and NICE.
There are lighting softwares or the manufacture could help with fixture selections regarding mounting height, spacing, accent, task or general, comfort level, color, etc. Some of the track lighting are out of sight, the one with two wire catenary hanging fixtures for night clubs or high end homes. Custom lighting paired with an interior designer is like walking into a different world ready for parties or just relaxing.
Nice job guys
Excellent work - as usual!
Damn nice lights and damn good work! Jordan no maybe about it, you can handle those lights!
Awesome video as always!
Paul can you make a short video on how to make the level perfect? Like your tips and tricks for laser level? I know how to use mine but there’s other settings that I’m sure are better for a specific project. Anyways it’s a selfish request! Thanks guys and love the channel
Those lights are dinosaurs! 😵
Love you guys!! Rad work
Camarata style with the pole saw.
The light fixtures look great. Not sure I'm big on the proprietary light engines (bulb), unless I'm wrong and they're common between brands. But if they last forever, it might not matter. Great video. Great content.
Thx Larry 💪
that is some clean lightning
I believe this is the hole cutter you have: Toolly 1-5/8" to 8" (40-200mm) Adjustable Circle Hole Saw Cutter, Twin Blade Hole Saw for Recessed Lights Ceiling in Recessed Drywall & Ceiling Tile. Available on Amazon.
Dr. Google prescribed this one to me: Nora NSC-6600 Round Hole Cutter. The product picture on one website (for whatever that's worth) even shows the same manual. CityLightsUSA has replacement blades for $10 each (model: Nora NSC-6501).
Nice. Thx all 👊👍
I have one of the hole cutters that is better than the one you bought, but not as nice as your old reliable ,it was less than $40 it has the adjustments like your old one , got it at ace hardware ! Also I go in reverse to start helps you check before you actually cut and make sure you are straight