I have a NVR kit from Netword Video Recorder and would like to know how to solve the following problem: 4 cameras are presenting IP conflict and in the system menu there is no information on how to update the system or the NVR.
Hello Ademar Pls try the following: If all the 4 camera's have the same ip address connect one camera only and try to reach camera edit and change it to a new ip ex: 192.168.1.10 Make it 192.168.1.19 and save changes & so on. Also make sure ip adrress of the NVR has the same ip address range of cameras Ex: 192.168. range .1 Anther method Connect camera directly to the pc and create a new ip for each cam matching NVR ip address range Good luck
@@ademarsilva306 find firmware version detail on your nvr at info page and double check if newer firmware version is available on web its easy to download and extract on flash drive then plug it into your nvr and update firmware from maintain page
I changed my router and now I can’t see anything on my phone app. Only the nvr works. It is connected to internet. How do I reset to factory settings? I’ve already tried simple reboot. I can’t stand the customer service.
Hello Jorge 1 Pls make sure the network cable is connected correctly 2 Go to network settings page and note or picture the IP settings of this page you may need it later in case of cams are not showing any more! due to change of ip address. 3 at the same page activate the (DHCP) and make sure to save the setting 4 Restart the NVR and wait few minutes then try viewing on the app. I hope it works 🙏🤞
It did not work for me i am using NVR and for mobile app i am using IP pro. Please suggest another method as per when i click the right mouse button after it appearing wrong password nothing happens. I clicked right button 20 to 30 times
Hi Robert, as usual for most of NVR'S it should start recording automatically after powering it of course with healthy HDD also the same for audio if your cams has a (built-in microphone) If so and still having recording problem pls reset the NVR to factory default and all settings should work fine and activating audio record from incode setting is must. Good luck
This actually worked for me, surprisingly. Thank you!
🎩🙏
They have that desk in that machine cord volume to
I have a NVR kit from Netword Video Recorder and would like to know how to solve the following problem: 4 cameras are presenting IP conflict and in the system menu there is no information on how to update the system or the NVR.
Hello Ademar
Pls try the following:
If all the 4 camera's have the same ip address connect one camera only and try to reach camera edit and change it to a new ip ex: 192.168.1.10
Make it 192.168.1.19 and save changes & so on.
Also make sure ip adrress of the NVR has the same ip address range of cameras
Ex: 192.168. range .1
Anther method
Connect camera directly to the pc and create a new ip for each cam matching NVR ip address range
Good luck
@@mohamaddeheini894 thanks for the tip. How do I update Nvr.
@@ademarsilva306 find firmware version detail on your nvr at info page and double check if newer firmware version is available on web its easy to download and extract on flash drive then plug it into your nvr and update firmware from maintain page
Is it possible to change cloudID?
Hi
If you mean serial number of cloud id
Its not possible
Will this keep the recordings intact as I need to get to those?
It should work and record normally with consideration of HDD capacity and number of days has been recorded
This didn't work for me. Do you know any other way I can change the password?
Hey there!!
What is the app name or dvr/nvr brand??
NVR Leshp
I changed my router and now I can’t see anything on my phone app. Only the nvr works. It is connected to internet. How do I reset to factory settings? I’ve already tried simple reboot. I can’t stand the customer service.
Hello Jorge
1 Pls make sure the network cable is connected correctly
2 Go to network settings page and note or picture the IP settings of this page you may need it later in case of cams are not showing any more! due to change of ip address.
3 at the same page activate the (DHCP) and make sure to save the setting
4 Restart the NVR and wait few minutes then try viewing on the app.
I hope it works 🙏🤞
It did not work for me i am using NVR and for mobile app i am using IP pro. Please suggest another method as per when i click the right mouse button after it appearing wrong password nothing happens. I clicked right button 20 to 30 times
Hii
Pls try the other video
I hope it works 🙏
In order to record and have volume what do you need to do that
Hi Robert, as usual for most of NVR'S it should start recording automatically after powering it of course with healthy HDD also the same for audio if your cams has a (built-in microphone)
If so and still having recording problem pls reset the NVR to factory default and all settings should work fine and activating audio record from incode setting is must.
Good luck
Tied many times and didn’t work. I use eseecloud app
So sorry to hear that
Pls try the battery method
as per this link and I hope it works for you
ua-cam.com/video/N5jkU_4YN20/v-deo.html
Ciao, ho lo stesso problema ma non ha funzionato, uso ip-pro, grazie
Didn’t work gave me 4 trys and then locked it up for 9 mins
Its normal to be locked pls restart nvr then try again but before make sure you have the same type of Nvr and application as shown in the video
work
🎩🙏
It didn’t work for me I tried it several times
What is the application name you are using to view your dvr remotely??
@@mohamaddeheini894 I believe is Esee cloud but I can’t get into it without the password for my nvr
This didn't work for me.
Pls try the other method anther video
What is ur dvr mobil application??