I have the same motor and they are real good motors to have. I plan on putting new rings on mine and cam and springs. Going to build it for a rock crawler I'm going to build. Be Better than a side by side after I'm done. Going to rebuild a 400 turbo tranny for it and get a aluminum transfer case for it. Going to use 3/4 ton Chevy axle on it also.
I have a gen 6 454 in my dads shop truck that he gave to me for my square body and I wanted to do a carb swap on it this summer but I’ve never seen full videos on what I’m looking for till now so please be specific on how or where you gonna get the intake manifold from
Still working on this? Looking to pick up a L21 454 and do the exact same set up (intake,carb,zz502 cam, etc)for my dads Chevelle. I’d love to see more of your process with this engine!
Is it okay to use an impact to take the bolts off the cylinder head? Or any bolts for that matter? I always see people using electric rachets, but what's the point if my impact can do the same job.
I usually break the bolts lose with a breaker bar first, then run them out with an impact or electric ratchet, depending what I have closest to me. I never use one putting bolts back in, however.
Nice engines , truly can make 500 hp na with stock short block and heads just gota pick right CAM intake carb headers zz 502 cam nice street strip got one in my gen 6 great engines for guy who just wants throw quick engine together go 11s or 10s on laghing gas retard timing and watch plugs detonation kill ya 200 shot is ok if carefull
An older one should work as long as the ports match. There may be some interference with the machined edge on the head, which will require a small notch to be put in the intake. I'll be sure to go into detail when I get one!
@@dalemcgarrett284 alright sweet I’ve seen videos on them saying that you’d have to notch its somewhere but they never really went into depth and showed where but I appreciate it a lot
Notch what ? There's no notching the old manifold drops right on oval port that is , maybe thinking notch on the heads were the springs go on somtimes there is cast flash in spring pockets were rotator eliminators go only somtimes
I have the same motor and they are real good motors to have. I plan on putting new rings on mine and cam and springs. Going to build it for a rock crawler I'm going to build. Be Better than a side by side after I'm done. Going to rebuild a 400 turbo tranny for it and get a aluminum transfer case for it. Going to use 3/4 ton Chevy axle on it also.
I just came across your channel. this looks like a fun little project to follow. how's it coming along? when do we get to see some more?
New stuff coming very soon. Been super busy with work lately but should have some free time coming up. Thanks for watching!
I have a gen 6 454 in my dads shop truck that he gave to me for my square body and I wanted to do a carb swap on it this summer but I’ve never seen full videos on what I’m looking for till now so please be specific on how or where you gonna get the intake manifold from
Just get any decent dual plane bbc will fit ,airgap Is best if $ if not get speedmaster repop 200$
Still working on this? Looking to pick up a L21 454 and do the exact same set up (intake,carb,zz502 cam, etc)for my dads Chevelle. I’d love to see more of your process with this engine!
I agree with the credit score analogy 😂
I just bought a 454 big block for 3k rebuilt. Did I get a good deal? It only had about 60k miles before the rebuild
That sounds like a great deal. Especially if the work was done properly.
I live in Wisconsin and I just Subscribed and like you not a lot of money 💰🤑
Like to see you build this and put it in something
Is it okay to use an impact to take the bolts off the cylinder head? Or any bolts for that matter? I always see people using electric rachets, but what's the point if my impact can do the same job.
I usually break the bolts lose with a breaker bar first, then run them out with an impact or electric ratchet, depending what I have closest to me. I never use one putting bolts back in, however.
Nice engines , truly can make 500 hp na with stock short block and heads just gota pick right CAM intake carb headers zz 502 cam nice street strip got one in my gen 6 great engines for guy who just wants throw quick engine together go 11s or 10s on laghing gas retard timing and watch plugs detonation kill ya 200 shot is ok if carefull
Come to Texas2K
Or are you just throwing on an older 454 intake manifold, would that type of thing be possible
An older one should work as long as the ports match. There may be some interference with the machined edge on the head, which will require a small notch to be put in the intake. I'll be sure to go into detail when I get one!
@@dalemcgarrett284 alright sweet I’ve seen videos on them saying that you’d have to notch its somewhere but they never really went into depth and showed where but I appreciate it a lot
Notch what ? There's no notching the old manifold drops right on oval port that is , maybe thinking notch on the heads were the springs go on somtimes there is cast flash in spring pockets were rotator eliminators go only somtimes