X5SA 500 PRO Installing Video
Вставка
- Опубліковано 4 жов 2024
- Detail:
Large 3d printer Tronxy X5SA-500 Pro High-Precision DIY 3D Printer FDM Guide Rail Ultra-quiet Auto Leveling ImpressoraIntelligent memory Power failure resume printing
500*500*600mm
Titan extruder
TMC ultra quiet driver
Filament detection
Z axis dual lead screw drive
Auto-Leveling
Double Limited Switch
store.tronxy.c...
#3d
#3dprinting
#3dprinter
#machine
#3dprints
#budget3dprinter
#3d printer
#fast3dprinter
#fast
#Best 3D printer for large prints
#Large print area 3D printerBest 3D printer for large prints
#Fast 3D printer
#CORE XY 3D printer
#Klipper firmware 3D printer
#Remote control 3D printer
#3D printer with Wi-Fi connectivity
#Large print area 3D printer
#TRONXY VEHO 600 PRO V2 features
#Affordable high-performance 3D printer
mine arrived today... can't wait to start assembling it!
Can you please tell me how you like it? I'm interested in buying one, but I see really poor reviews
I have this exact printer, I would not recommend it, took me ages to mod it to get it to even work. In the end I fitted some tensioned upside down anti-lash screws bolted to the x bars to stop the threaded bars from moving every time the stepper motors engaged/disengaged & making accurate levelling totally impossible. I have to re-set the z offset for *every* single print, no matter what & I also have to check the bed level with a vernier gauge after every print, to see if it needs correcting & re-auto levelling.
Even then it may take two or three goes to get the Z offset to actually be accurate once a print starts. Imagine trying to do all this if the threaded bars are moving the bed every time you breathe on it or the steppers dis/engage, without my mod!!
I would buy a smaller better quality printer next time.
я думаю есть смысл вместо двух двигателей установить один по середине и ременную передачу. Тогда эта проблема уйдет навсегда. и регулировка будет только механическая
I'd love to try one of these if you need anyone to test/review
I have a question....im 1-2 days away from buying one....would using thread locker on all nuts and bolts be a good idea to lock everything in place?
I just unpacked mine last night and am missing some screws, the M4 x 30 (14:52) aren't anywhere in the package to be seen, nor are they even listed on the 4 packages of screws. Not a good first impression.
I didn't even get a instruction guide
DO NOT BUY THIS PRINTER!! So many problems out of the box. Homing works maybe 25% of the time, but most times, the bed crashes into the print head. I will be changing out the firmware on this. I also had missing parts, which I had to source myself.
Unless you want to mod the living hell out of this printer, I would not recommend buying this at all.
I've had no problems at all .
have you fixed the issue? and if not, what is a good printer of this size with this price point
Ther extra switch for limit switchmy question is is z estoppe switch or is z axis e stop done with bed leveling hal sensor
I bought the X5SA 500 PRO and I regret paying $ 1,000 for this stupid junk ... the z-engine has problems ... the calibration does not save the coordinates ... the system and updates do not work ... the sensor is far away and is printed in the air ... the customer service responds very slowly and does not provide a solution successful ..
Damn you, I wasted so much time on this scrap machine
If you’re watching this then unfortunately it’s probably too late. Do not buy this printer! You’ll get better results sourcing parts and making a completely custom one yourself. Strongly recommend returning it before trying to assemble as you only have about 15 days and packing it back up is not an easy task.
What is wrong with the printer?
@@enmanuelhenriquez975 cura 4.1 doesn't work?
Hey, what's the difference between x5ST and x5SA ? thanks
500mm bed/longer frames
gracias.
Where to buy and cost please?
pls visit our online shop www.tronxyonline.com
15:50 the video missed mark use RM4*16 screw on top of dolly
good printers. but the sales department should be fired!
So you have the pro guide rails for the 400 printer?
yes we have,
pls visit our online shop www.tronxyonline.com
Make the X5Sa 500 Pro a good printer before starting the next monster. Trouble is inevitable here.
what is wrong with the printer?
I bought the X5sa Pro piece of crap the extrusions are small and impossible too get it square, this one looks better
ol too much to do in relation to the price
I am very disappointed in this quality
every reviewer says Tronxy Printer Problems , no one says its good !!!
no, all the reviewers say the instructions suck and its a pita to put together and setup, but once you get them figured out theyre massive, cost effective, and have amazing build quality
It’s not for an amateur 4sure. But everything can be fixed
They know what they are talking about
Very bad quality!!! I do not recommend this company to anyone!!!