For being out of the box. That thing can really rip. Excited to see what it does after you do some mods on it? Keep rocking out these awesome videos 👍👍. And thanks again. 🙏🙏
230,250 sunt net superioare din toate punctele de vedere ,fata de noua generatie. Asta e o mare involutie pt compania stihl,asa e cand se tine mai mult cont de marketing decat de calitate. Spor in conrinuare Ram 🤝
I just picked up a like new ms250 for a good price, I bought a ms250 as my first saw 20 years ago, I should not have sold it but i got fresh one from the factory! Anyone who’s had a 025 or ms250 can tell you they rip thru wood!!!
I bought an ms250 for my replacement of a makita dcs520i that I've had for years. I'm really happy with it,even in stock form with a stihl chisel chain and 18" bar. I also run a ms441c and ms310,but the older I get the heavier they feel,lol. Most of my firewood is red oak or maple and no bigger than 22" in diameter so the ms250 will cut about 90% of what I need.
My neighbor gave me his 2005ish MS250C (toolless tension adjustment) after I felled and sawed up some trees on his property at his request. He was disgusted with his MS250C. It would not hold a chain tension setting and after it threw a chain he was afraid of it. I cleaned it up (removed about 6 ounces of oil soaked sawdust with brushes and dental picks in the bar channel, clutch cover and throughout). I replaced the 16" bar and chain with an 18" and it is a real workhorse. Prefer my 15% more powerful Husqvarna 353 e-tech for felling trees but the MS250C is a great downed tree finishing and branching aid. I think the stock Stihl chains cut better than the stock Hus'. But proper manual sharpening evens that difference. The Stihl "safety" flanges on the chain limit tip plunge cutting (I have 18" bars on both machines and sometimes fell large trees that require a plunge into the notch) that the Husqvarna chains do not suffer. I really like them both . . . but I wish Stihl would open their fly and sell through outlets instead of only dealers. I have no local Stihl dealer (closest one - 20 miles away - closed shop two years ago). I can get Husqvarna parts all over at box stores and the internet.
I was looking for a trim saw but true value didn’t have one in stock so I bought the ms 250 instead cause it was light and small enough. I just cut down a dead oak on the property, about the diameter of the bar, it did fantastic. Very happy with the purchase. I’ll see how it does up in a tree tomorrow.
Faine modele astea 180 230 250 260 270. Chiar au fost modele reușite pentru gospodărie și lemne de foc. Interesant cat de mult face un lanț pregătit corect. Aproapr că n a simnțit lama de 71. Te salut si toate cele bune
Legendary lol. They are good saws, and all that most guys need for firewood. My favorite plastic case stock saw is the husky 450. It's the same specs as a 353 and has the easy to remove top cover for cleaning the air filter. You should try that 250 with some picco chain, the smaller saws really like it.
Evening popa, I just bought another ms 250 on sale 379 dollars. Have one from six years ago and still very strong 💪 running and high compression. Great little ripping buger. 🙏 you have a great one sir😊❤🦅🦅🦅🙌😉
Salut, sunt surprins sa vad ca in 2021 se mai produce. Bune, semipro dar durabile si usor de reparat, cred personal din clasa mica medie ms240 ms260 sunt excelente ,carter de mag- alloy. Faci clipuri super, ma refer la toate in general. O zi buna
Special acest videoclip😍, îmi amintesc când aveam vreo 16 ani mi-a făcut taică-miu cadou un Stihl 025 (west germany) scria pe capacul de la demaror😂, mai merge și acum, mulțumesc pentru amintire și spor la treabă in continuare.🪵🪚👈
Hello from northeastern Pennsylvania. I usually end up cutting some pretty big wood and run a couple 038 Magnum chainsaws with 28 inch bars. However time is taking its toll on my back and I need to run a smaller so I'm now so I run a ms250 all the time and it's problematic when I get to larger things. I was wondering could you tell me the type of bar you put on that and where you got the shims from? I'd love to try it out myself . Also great job on the video loved it😁
@@poparamiro Hello from Pennsylvania, that'll give me a good start on finding what I need. I talked to a couple different people hear about my plan of putting a larger bar on my small saw and most of them said not to bother. But they don't have my bad back and one of them told me the oiling problem can be fixed. He suggested I buy the bar and look where the oil whole matches up with the oiler on the saw. Take out my small Dremel grinder and extend the whole to meet the oiler. Might work, I'll have to take a good look at it before I start messing with it. Thanks again and keep up the good videos Eric
Un model excepțional, la fel și ms251. Spre deosebire de 250, 251 necesită modificări la evacuare pentru degajarea gazelor și temperaturii fiind mai restrictivă fin fabrică.
Mine is hard to start plus im 77 yo bad shoulder... Does it pull easier without the bar. ...then possibility once warmed up...put the bar and chain on.... My MS 250 C has easy start. The MS 250 ( used) is tough to pull.. Any suggestion welcome
One thing I found with the 250 kit was my saw wanted to idle to high, around 3,700-3,800. I know the cause of this problem, now. The intake boot plate and gasket provided with the kit are to thin. Since, the throttle rod is of a finite length, this causes the throttle plate to be opened slightly by the throttle rod. Fix - replace the intake boot plate and gasket with oem Stihl parts.
hello, but where did you find the new stihl ms 250 model, from which website did you buy it, I would like to buy it myself, it cuts very well, respect for the work done
@@georgedavall9449 Makitas are good saws,but parts and service here in the us is nonexistent. An ms250 is a good cutting reliable saw that's supported by a great dealership network and aftermarket parts are cheap and plentiful. I can't advocate for a company like makita who cant supply parts and has zero service after the sale.
@@ciphercode2298 Point taken, however, even Stihl dealers are victims of the supply chain. Issue. I’ve been waiting for a chain for weeks, and then the dealer sold me the wrong chain, but are holding the right one for exchange, when I get back there. There ARE places like ‘Saw Again,’ that carry practically every part for most all the Dolmar/Makita saws. They are reputable, and I have bought from them. However, now that Makita has stopped production, who knows how long parts will be available, to your point. I’m mostly a Husqvarna guy, but have Stihl, Echo, and Dolmar saws. Take care Cipher
Salut! Azi am nevoie de un sfat bun! Vreau o drujbă mică pentru treburi ușoare! Am zis 211 e suficient! Și e singurul hobby ce se fabrică în SUA. Dar pe urmă am aflat că Ms 230 și Ms 250 costă tot cam cât un 211 și deși puțin mai grele sânt mai durabile mai rigide pot face o tăiere mai precisă nu au suspensie atât de flexibile. Avantajul lui 211 ar fi consumul și filtrarea. Și poate ungerea . Deoarece are rezervoare 280 cu 180 ml. Față de 460 cu 200. Dar toate cele trei vin cu șină de 35 3/8 1,3. Deci cred că nu vor fi probleme. Un lucru totuși ar fi! La Ms 250 cum credeți că va rezista garnitură tăietoare având o putere poate prea mare pentru lungimea și pasul șinei standard. Astfel ar atinge viteze mari în tăietură încingând șină și lanțul mai tare decât ar trebui. Mult mai mult ca un 211 de exemplu. Dumneavoastră știți mult mai bine tot ce vreau să zic! Și puteți să mă îndrumați spre ce-a mai bună alegere! Menționez că mai am un 261 și voi folosi al doilea Fierăstrău că ajutor la chestii mai mici. Deoarece lanțurile 3/8 pico sânt mult mai ieftine și au mulți analogi. Deci reduc consumul de lanțuri mai scumpe. Și uneori pot primi ajutor pentru a termina mai repede. Ms 211 230 s-au 250 pot fi operate chiar și de un copil. Mulțumesc Anticipat!
@@poparamiro La vremea respectivă! Nu descoperisem Echo CS 450ES. Care pornește mai ușor și are pompă de amorsare! Ms 250 este s- au era o sculă super acuma nu știu la ce calitate le produc. Am cercetat și zic unii că rupe lanțurile 3/8 1,3 Pico. Dar nu asta mă sperie! Totul e să pornească ușor! Cine va folosi nu are super puteri! Și eu voi folosi în unele situații ușoare când nu merită deranjat MS 261 c. De asta m-am orientat apoi spre Echo CS 450 ES. Unde dacă Dvs. Ne faceți MM și reglajul corespunzător. Vă fi super alegerea. Dacă nu! Ne vom mai gândi!
For being out of the box. That thing can really rip. Excited to see what it does after you do some mods on it? Keep rocking out these awesome videos 👍👍. And thanks again. 🙏🙏
Thanks for king words!
I will port the muffler first...
Best regards!
230,250 sunt net superioare din toate punctele de vedere ,fata de noua generatie.
Asta e o mare involutie pt compania stihl,asa e cand se tine mai mult cont de marketing decat de calitate.
Spor in conrinuare Ram 🤝
Tendinta si directia peste tot din pacate, dar nu e o surpriză..
Toate cele bune și spor!
I just picked up a like new ms250 for a good price, I bought a ms250 as my first saw 20 years ago, I should not have sold it but i got fresh one from the factory! Anyone who’s had a 025 or ms250 can tell you they rip thru wood!!!
All the best!
I bought an ms250 for my replacement of a makita dcs520i that I've had for years. I'm really happy with it,even in stock form with a stihl chisel chain and 18" bar. I also run a ms441c and ms310,but the older I get the heavier they feel,lol. Most of my firewood is red oak or maple and no bigger than 22" in diameter so the ms250 will cut about 90% of what I need.
Nice saws!
Thanks for watching and comment!
My neighbor gave me his 2005ish MS250C (toolless tension adjustment) after I felled and sawed up some trees on his property at his request. He was disgusted with his MS250C. It would not hold a chain tension setting and after it threw a chain he was afraid of it. I cleaned it up (removed about 6 ounces of oil soaked sawdust with brushes and dental picks in the bar channel, clutch cover and throughout). I replaced the 16" bar and chain with an 18" and it is a real workhorse. Prefer my 15% more powerful Husqvarna 353 e-tech for felling trees but the MS250C is a great downed tree finishing and branching aid. I think the stock Stihl chains cut better than the stock Hus'. But proper manual sharpening evens that difference. The Stihl "safety" flanges on the chain limit tip plunge cutting (I have 18" bars on both machines and sometimes fell large trees that require a plunge into the notch) that the Husqvarna chains do not suffer. I really like them both . . . but I wish Stihl would open their fly and sell through outlets instead of only dealers. I have no local Stihl dealer (closest one - 20 miles away - closed shop two years ago). I can get Husqvarna parts all over at box stores and the internet.
Thanks for watching and comment!
Great video, thank you. Little and powerful. I'm impressed.
Thanks for watching!
I just bought one ms250 and can't wait to try it at the cabin.
Good morning this is beautifull The new STIHL MS 250 chainsaw
Thanks for watching and best regards!
I was looking for a trim saw but true value didn’t have one in stock so I bought the ms 250 instead cause it was light and small enough.
I just cut down a dead oak on the property, about the diameter of the bar, it did fantastic. Very happy with the purchase. I’ll see how it does up in a tree tomorrow.
Thanks for watching and comment!
Excellent, as always! 👍✌😃
Thanks for watching and comment!
Szuper gép,jól megy!👌🤝👍
Thanks for watching and best regards!
Fantastic efforts, thanks for the footage my friend 😁👍❤️🇬🇧🇬🇧
Thanks for watching and comment!
Faine modele astea 180 230 250 260 270. Chiar au fost modele reușite pentru gospodărie și lemne de foc. Interesant cat de mult face un lanț pregătit corect. Aproapr că n a simnțit lama de 71. Te salut si toate cele bune
Salutare!
Da, nu s a stresat cu sina de 70cm...
Spor si numai bine!
Păi și renumitul ms 170 nu e fain Ionuț?😈🤣🤝
@@vladionut3079 ba da. Cel mai faci vibrator
Legendary lol.
They are good saws, and all that most guys need for firewood. My favorite plastic case stock saw is the husky 450. It's the same specs as a 353 and has the easy to remove top cover for cleaning the air filter.
You should try that 250 with some picco chain, the smaller saws really like it.
😁
Thanks for watching and comment!
Best regards!
Salut ! Excelenta masina! Spor la treaba!
Salutare si spor!
Evening popa, I just bought another ms 250 on sale 379 dollars. Have one from six years ago and still very strong 💪 running and high compression. Great little ripping buger. 🙏 you have a great one sir😊❤🦅🦅🦅🙌😉
Thanks for watching and comment!
Ваш канал очень интересный.,смотрю с удовольствием.Ничего лишнего ,все по делу,спасибо вам за вашу работу.А stihl ms 250 прекрасная бензопила.
Thanks for watching and kind words!
Yes, ms 250 is great...
All the best!
I’ve owned my ms250 for 3 years now still reliable and always wants to cut.
Ce bine merge acest ms 250 stoc, dapoi cînd va avea Muffler Mods. Ea în realitate este peste urmașul ei 251. Super clip💪. Sănătate maximă Ram🤝🤝🤝
Chiar a mers bine stoc...
Toate cele bune și spor!
Fir intins !😁🤣💪
@@poparamiro Mie pește mi trebuie nu fire întinse🤣🤣🤣
🤣🤣🤣
💪
I have 250 since 2009 goox what a great chainsaw for firewood.
True, thanks for watching!
Nice little saw,badass.The larger Stihl models are off the chain.I got one some years ago and it cranks every time with a minimum of maintenance.
True, thanks for watching!
Merge bine cotarca.
Toate cele buna RAM și numai bine🤝🤝🤝
😁
Numai bine ! 🤝🤝🤝
Stihil chain saw is very durable 💯
Yes, great saws...
Best regards !
BRICI SĂNĂTATAE SCULE DE SCULE 👍👍👍🤝🤝🤝
Numai bine spor!
🤝🤝🤝
Ram, mută te mai la sud ca să scapi de zăpadă. 🤭Faină drujba.. Prezentare ca la carte. Tipic Ramiro Popa. Felicitări maestre🤝🤝
Multumesc!
😁 Era glaciara 🤣
Spor si numai bine!
of course, a legendary chainsaw.
i buy today in West-Ukraine a 210 and a 250, its cult the 250!
Nice!
Best regards!
Nice test RAM! Ms 250 one of the Best! Maybe test ms250 vs holzfforma g255?
Mulțumesc!
Daca as fi avut G255 sigur as fi facut versus...
Toate cele bune!
Salut, sunt surprins sa vad ca in 2021 se mai produce. Bune, semipro dar durabile si usor de reparat, cred personal din clasa mica medie ms240 ms260 sunt excelente ,carter de mag- alloy. Faci clipuri super, ma refer la toate in general. O zi buna
Salut!
Bine spus..
Mulțumesc și numai bine!
@@poparamiro 🙋👍🤝
@@josepodasdemadeira 🤝🤝🤝
Special acest videoclip😍, îmi amintesc când aveam vreo 16 ani mi-a făcut taică-miu cadou un Stihl 025 (west germany) scria pe capacul de la demaror😂, mai merge și acum, mulțumesc pentru amintire și spor la treabă in continuare.🪵🪚👈
Multumesc si eu pentru comentariu!
Toate cele bune și spor!
Thats a huge bar for this saw, didn't realise it can work it. Will you need to add oil each cut ?
Yes, oiler not fitting, it s just for testing...
Hello from northeastern Pennsylvania. I usually end up cutting some pretty big wood and run a couple 038 Magnum chainsaws with 28 inch bars. However time is taking its toll on my back and I need to run a smaller so I'm now so I run a ms250 all the time and it's problematic when I get to larger things. I was wondering could you tell me the type of bar you put on that and where you got the shims from? I'd love to try it out myself . Also great job on the video loved it😁
Greetings from Romania!
That bar is a D009 Husqvarna mount, but it is just for one cut, the oiler not working...
Thanks for watching and comment!
@@poparamiro Hello from Pennsylvania, that'll give me a good start on finding what I need. I talked to a couple different people hear about my plan of putting a larger bar on my small saw and most of them said not to bother. But they don't have my bad back and one of them told me the oiling problem can be fixed. He suggested I buy the bar and look where the oil whole matches up with the oiler on the saw. Take out my small Dremel grinder and extend the whole to meet the oiler. Might work, I'll have to take a good look at it before I start messing with it. Thanks again and keep up the good videos Eric
Un mare like 👍👏
🤝🤝🤝
@@poparamiro salutare
Salutare si toate cele bune!
Did you use bar adapters for the medium sized bar to small mount ?
Yes... Just for testing...
Best regards!
@@poparamiro I was debating the same test but everything I have is in 3/8
@@poparamiro I have pushed limits on the 026/ms260s I do with upto 32 inch full comp 3/8 full chisel for giggles
@@ChippyOutdoors nice!
Un model excepțional, la fel și ms251. Spre deosebire de 250, 251 necesită modificări la evacuare pentru degajarea gazelor și temperaturii fiind mai restrictivă fin fabrică.
Mine is hard to start plus im 77 yo bad shoulder...
Does it pull easier without the bar. ...then possibility once warmed up...put the bar and chain on....
My MS 250 C has easy start.
The MS 250 ( used) is tough to pull..
Any suggestion welcome
Easy start handle...
Thanks for watching and all the best !
Sa fie primita si asta! :D eu zic ca merge ok pentru o drujba stock.
Da, a mers ok stoc...
Toate cele bune!
One thing I found with the 250 kit was my saw wanted to idle to high, around 3,700-3,800. I know the cause of this problem, now.
The intake boot plate and gasket provided with the kit are to thin. Since, the throttle rod is of a finite length, this causes the throttle plate to be opened slightly by the throttle rod.
Fix - replace the intake boot plate and gasket with oem Stihl parts.
Thanks for info!
All the best!
Salutare si succes in tot ce faci frumos clip imi puteti zice un magazin sau un site de unde ati cumparato? Mersi
Salut!
Multumesc!
Din pacate e dusa din Ucraina, inainte sa inceapa razboiul...
Numai bine!
Am o intrebare,de unde ati gasit modelul nou si original?
E dus din Ucraina, inainte sa inceapa razboiul...
What kind of wood is that? We only have pine in my area of Montana,U.S.A.
It is beech...
hello, but where did you find the new stihl ms 250 model, from which website did you buy it, I would like to buy it myself, it cuts very well, respect for the work done
From a friend...
Best regards!
@@poparamiro but do you have an idea where I can buy one too
What is the maximum bar length that can be fitted here?
Don t know exactly...
Salut ram de unde ai cumparat.o si la ce pret ? Ms
Salut!
E a unui prieten, din Ucraina adusa, înainte de razboi. 1600 Ron a fost...
Numai bine!
Hola Poparamiro's tengo una 023c puedo pasarla a 025 ? gracias
Hi!
I think it can be converted, not sure tho...
Thanks for watching !
👍👍👍👍
🤝🤝🤝
Buna !!!!!!!!!!!!
Spor si toate cele bune!
Chain is 3/8 picco no 0.325
A apărut Holzfforma g395?
O sa apara in curand cred....
Unde ai mai găsit 250 poate pe o piață non euro .? .
Din Ucraina adus, chiar inainte sa inceapa rozboiul...
Numai bine!
14in bar? in Argentina they came with an 18in bar
De unde ai luat-o
Din Ucraina, inainte de razboi...
Чётко!!!
A high revving little 45 cc saw, not big enough for you though POP
😁🤣
Best regards!
Same price as the makita 5000p so would be good comparison video!
I have a 346xp vs ms 250 ....
Best regards!
I love makita saws,but parts and service are pretty nonexistent here in the United states. I ran a dcs520i for years.
Dol-KITA 5000 eat that little Stihl for LUNCH, and Dinner!!! 👍✌
And ‘Poparamiro’ would agree!
@@georgedavall9449 Makitas are good saws,but parts and service here in the us is nonexistent. An ms250 is a good cutting reliable saw that's supported by a great dealership network and aftermarket parts are cheap and plentiful. I can't advocate for a company like makita who cant supply parts and has zero service after the sale.
@@ciphercode2298 Point taken, however, even Stihl dealers are victims of the supply chain. Issue. I’ve been waiting for a chain for weeks, and then the dealer sold me the wrong chain, but are holding the right one for exchange, when I get back there.
There ARE places like ‘Saw Again,’ that carry practically every part for most all the Dolmar/Makita saws. They are reputable, and I have bought from them. However, now that Makita has stopped production, who knows how long parts will be available, to your point.
I’m mostly a Husqvarna guy, but have Stihl, Echo, and Dolmar saws. Take care Cipher
Salut,ce lamă are
Salut!
TsuMura 70cm, e doar pentru test...
Numai bine si spor!
Yo masinko hai lo kasari garne ho
Thanks for watching!
250 mạnh nhé anh
Best regards!
@@poparamiro ok
Mobil na phaleko kasari banaune
Thanks for watching!
I wonder how well it would cut with a light 04 bar and chain.
Good for sure..
Thanks for watching and comment!
14250 at WOT? Sounds kind of lean to me!
Salut! Azi am nevoie de un sfat bun! Vreau o drujbă mică pentru treburi ușoare! Am zis 211 e suficient! Și e singurul hobby ce se fabrică în SUA. Dar pe urmă am aflat că Ms 230 și Ms 250 costă tot cam cât un 211 și deși puțin mai grele sânt mai durabile mai rigide pot face o tăiere mai precisă nu au suspensie atât de flexibile. Avantajul lui 211 ar fi consumul și filtrarea. Și poate ungerea . Deoarece are rezervoare 280 cu 180 ml. Față de 460 cu 200. Dar toate cele trei vin cu șină de 35 3/8 1,3. Deci cred că nu vor fi probleme. Un lucru totuși ar fi! La Ms 250 cum credeți că va rezista garnitură tăietoare având o putere poate prea mare pentru lungimea și pasul șinei standard. Astfel ar atinge viteze mari în tăietură încingând șină și lanțul mai tare decât ar trebui. Mult mai mult ca un 211 de exemplu. Dumneavoastră știți mult mai bine tot ce vreau să zic! Și puteți să mă îndrumați spre ce-a mai bună alegere! Menționez că mai am un 261 și voi folosi al doilea Fierăstrău că ajutor la chestii mai mici. Deoarece lanțurile 3/8 pico sânt mult mai ieftine și au mulți analogi. Deci reduc consumul de lanțuri mai scumpe. Și uneori pot primi ajutor pentru a termina mai repede. Ms 211 230 s-au 250 pot fi operate chiar și de un copil. Mulțumesc Anticipat!
Cred ca un ms 250 e perfect!
@@poparamiro La vremea respectivă! Nu descoperisem Echo CS 450ES. Care pornește mai ușor și are pompă de amorsare! Ms 250 este s- au era o sculă super acuma nu știu la ce calitate le produc. Am cercetat și zic unii că rupe lanțurile 3/8 1,3 Pico. Dar nu asta mă sperie! Totul e să pornească ușor! Cine va folosi nu are super puteri! Și eu voi folosi în unele situații ușoare când nu merită deranjat MS 261 c. De asta m-am orientat apoi spre Echo CS 450 ES. Unde dacă Dvs. Ne faceți MM și reglajul corespunzător. Vă fi super alegerea. Dacă nu! Ne vom mai gândi!
Nu ați scăpat încă de zăpadă ⁉️🤣
😁🤣🤣
Vremuri grele ...
Numai bine si spor!
😎👉👍👍👋👋
🤝🤝🤝
I am trading in ms250 delicious machine with suitable price for semi-professional cutter
Thanks for watching!
3/8 czy 325
3/8
Thanks for watching and best regards!
mine is a .325. But after this chain is worn, I’m switching everythinv to 3/8th’s
Like2
Numai bine si spor!
🤝🤝🤝
This guy bought whole setup muffs chaps saftey googles lol😅
Es malo ese modelo de Sthil.
Thanks for watching and comment!
Pırasa doğrar gibi doğruyor
Thanks for watching!