Can i fly a 3d printed VTOL? Titan Dynamics Hornet tiltrotor tricopter VTOL using INAV not Ardupilot
Вставка
- Опубліковано 4 жов 2024
- Hi All,
i know it's been a while, but i got a new groundbreaking (well for me at least) building a tilt rotor 3d printed VTOL.
design can be bought from @TitanDynamics here www.titandynam...
Full Specs here:
3x EMAX ECO-II 1300kv
7x4x3 Gemfan Hurricane props
Speedybee F405 wing flight controller
Ruibet 45a 4in1 ESC
Printed in both Overture Aero PLA (Prefoamed) and ESUN PLA+/CC3D
Battery i used are:
3300 4s with an 850 4s as a ballast weight up front (this thing can take a lot of batteries)
Credit to @gizfpv for the tips on setting up the manta, i used the same mechanics to setup this hornet as well specially the slowing down of the tilt rotor speeds were fantastic.
How to setup INAV for VTOL, ill make a separate video for this.
You and people like you who go out and push the boundries of aeromodeling are legends.
Why thank you! i appreciate this sentiment! i love technology, and love trying new things out!
Kudos more to the designers making this possible :)
Heck of a project, good luck working through it. I started printing my first plane last night with Overture Air without any luck. I was told you could print it like regular PLA and obviously I was doing something wrong. Fooled around with temps and print speed and it was better but not looking anything like your prints. Can you share your configuration changes to get those results.Thanks and good luck getting that beauty flying 100% like it looks in your mind's eye.
Can you share the INAV settings? I want to build one too
Hello my friend, do you remember that you wanted to post the diff all file
I did and I forgoty apologies I'll see if I can get it today
Beautiful....it flies so smoothly. I built the Hornet too, but I'm a little bit insecure about the inav config. Could you share your config just to check if I missed something? Many thanks.😊
Will do sorry I just got back on the yt land haha
H nice to see te maiden. I made the Hornet too and it is ready for maiden but can't solve the issue of arming.Flightcontroller Matek V-tol. So i like to now how you made de Nav setup. Thx.
Hey mate check out this video! ua-cam.com/video/MEDjHdZZMdA/v-deo.htmlsi=Nj_TP3H0-ot__eps
A great intro to inav vtol setup
Hello my friend, can you post your diff all for inav?
I will do it tomorrow I'll do a diff all 👍
@@locarshobbies thank you my friend.👌
Hello my friend, which time you post the diff all?
Hello, have you found a solution to the lack of performance on your Titan? I have printed the same model with 1300kv motor 4S and 7 x 5.5 propellers and it can barely keep flying, I have tried with 6S without improvement, kind regards kim
Hi! So, 1300kv running 7040 3blade on 4s will be a bit lackluster, I have experienced improvement with the use of 6s with the same prop setup in 4s I'm constantly on the top third of the throttle to keep her flying running but on 6s I'm around 50-60%
Hello my friend do you think on the diff all file, please.
Hi this is so bad by me as I have been so busy however can I refer you to this link he has a diff that I followed and a step by step instruction I will update the video with this link so that propel can see what or how to setup 😊 apologies for not getting teh diff
ua-cam.com/video/MEDjHdZZMdA/v-deo.htmlsi=zOgKca04lf_PvRW_
Hi, does the motor at the back stop when you transition to forward flight ?
Yeah mate she definitely stops in fwd flight mode
Inverse reverse upside.....thing 😂
HEY! It's a technical term right!?
Ive been informed it's called "Anhedral":
Hello. Can you share config file? Thanks.
Will do shortly!
@@locarshobbies Hello again, is the config file ready? If so, can you send it? :) Thank you in advance.