Had difficulty finding over ride button, after watching video, went under the dashboard with light and found it right there, made it really easy after watching video how it looks like :) ,,koodos ...thank you so much ..and for people who are confused when to push over ride button.. just after you push break padel and after some time it will chirp 3 horns...
My remote starter stopd working probably 2 years ago. never knew what was wrong with it, so today i watched the wideo and tryed to reset it. works perfect now.Took me 5mins ford E250 factory setup Thanks for such an Awsome video. 💥💥💥💥💥
Thanks for the video! It took me a bit to find the programming button (it was tucked behind the driver's kick panel of my 2010 Mazda 6), but once I found it, it took all of about 60 seconds to get my new remote synced with the car.
Dude! Thanks so much for this video. I had looked all over the Internet, trying to find the proper procedure to program these PC mini remotes. I assumed that valet switch would be involved somehow, but couldn’t figure out how. This was easy Peezy. Hats off to you for posting this.
Just tried this method with my 2011 Ford Escape and it worked perfectly! The remote I bought to replace the square one in the video was slightly different but joy anyway!
Thanks a lot🙂 I can't find the program button , so I try without this step and it works also to. I turn on my mazda 6 2007 next push the break pedal and hold, next push remote starter button and hold to for around 15 secounds and now it's works like before 👍 thanks for this video , was very helpful for me
Bought a used Mazda 6 for my son and it came with 2 of these remotes. Used car dealer had no info . Remnotes start engine but shuts off as son as any door is opened! I am looking for info on how it works - a user guide or better yet installation manual as I used to install this equiopment back in my youth 80-90's LOL and know automotive electrical systems very well. Any resources you can point me to?
In this video you mention stepping on the brake pedal, releasing the brake pedal and releasing the programming switch. When is the programming switch depressed - before or after turning on the key?
2013 Ford Fusion Hybrid. Cannot fine programming switch for the life of me. Do the stealerships always install, or do they sometimes leave out so you must return and pay for programming?
Hey do you have a video or and help on valet mode for these remotes? Mine doesn't start the car it just beeps. Someone told me it might be on valet mode
I tried. I did everything correctly but after I try to start the truck I get back 3 honking and the truck doesn’t start. Any idea or it’s me keeping doing wrong
I have a 2012 MKZ that I bought used and it came with the GOH-PCMINI remote but the vehicle won’t start using it. Where would this switch be located and how can I fix this ?
Brother. I have 2010 mustang GT which came with 2 stock remotes (lock unlock + engine start). I want to upgrade both my keyfobs to 1 single keyfob which can all in 1. Can you help and advise how do I do that?
Hello is this work on Ford Fusion 2012 hybrid i have one key work but the other key need battery I afraid it’s-not sync to my car what should i do if it’s not sync Please advise
GOOD VIDEO LESSCO! Found it while searching for something else. Is there a way to program my 07 Dodge remote key to also start my vehicle without having to carry the remote control also?
Hey Lessco, would you and could you do a video on how to program a 2008 Malibu remote transmitter using the scan tool. I think that all of us who owns a 2008 or later model Malibu knows there are only two ways to do this, which is either go to the dealership or go to a car locksmith. By showing all of the Malibu viewers who own a 2008 or later model how to use the scan tool to program the remote , hopefully we can purchase a scan tool and do it our self. Please Lessco, make a video on this issue. Your video would be a first, and I can ASSURE you that you would get so many hits on the video that it would just blow your mind. Thank you, and all of us are looking forward to seeing the video.
This won’t work for a Subaru with an OEM remote start system, they don’t have programming buttons. To program a new fob for any Subaru with an OEM remote start model year 2011-2016 are as follows (2017-current should be a similar process) tested and works Programming Instructions 1) hold the drivers door open and keep it open thru the process. 2) step on the brake pedal and keep it depressed thru the proceess 3) turn the ignition key from "lock" to "on" 3 times quickly, ending up in the "on" position. This will not work if the key is turned slowly. 4) The lights will flash and the horn will honk 3 times to indicate remote start is in the programming mode. 5) press the remote start button once. 6) the horn will honk once to indicate the fob is programmed 7) Repeat step 5 to program additional fobs. 8) Turn the key to "lock" to exit programming mode. If you're using a used fob, it might be a good idea to replace the battery before programming.
I have a 2010 MKT(push start). THe remote start button is a GOH pcMini. How do I make it not die when door is opened after remote starting? Also, how do I program a new remote start button?
Try and pull the drivers kick panel by your left knee (plastic trim panel, clipped in at top, bolted on the bottom). It's located a little ways back behind the power pedal switch. Wires are all taped up tight. You should be able to leave panel screwed in on the bottom and have enough give to reach the switch. You can leave the door open while programming.
Just for the record my program switch on my Sebring was hidden under my dash but it looks exactly like what he showing ya I'll try and take a pic of mine to show ya what to look for cuz I'm just a Dumbass and I found it, so I'm sure you'll find it if I show ya mine hang tight I'll take a pic.
Life saver thanks
Had difficulty finding over ride button, after watching video, went under the dashboard with light and found it right there, made it really easy after watching video how it looks like :) ,,koodos ...thank you so much ..and for people who are confused when to push over ride button.. just after you push break padel and after some time it will chirp 3 horns...
My remote starter stopd working probably 2 years ago. never knew what was wrong with it, so today i watched the wideo and tryed to reset it.
works perfect now.Took me 5mins ford E250 factory setup
Thanks for such an Awsome video. 💥💥💥💥💥
Thanks for the video! It took me a bit to find the programming button (it was tucked behind the driver's kick panel of my 2010 Mazda 6), but once I found it, it took all of about 60 seconds to get my new remote synced with the car.
Dude! Thanks so much for this video. I had looked all over the Internet, trying to find the proper procedure to program these PC mini remotes. I assumed that valet switch would be involved somehow, but couldn’t figure out how. This was easy Peezy. Hats off to you for posting this.
glad it helped, its what I try to do here...
Just tried this method with my 2011 Ford Escape and it worked perfectly!
The remote I bought to replace the square one in the video was slightly different but joy anyway!
2013 Expedition, worked like a charm!
Thanks!
Worked perfectly the first time!!THANK YOU!!🙏🏾🙏🏾🙏🏾
Thanks a lot🙂
I can't find the program button , so I try without this step and it works also to. I turn on my mazda 6 2007 next push the break pedal and hold, next push remote starter button and hold to for around 15 secounds and now it's works like before 👍 thanks for this video , was very helpful for me
Bought a used Mazda 6 for my son and it came with 2 of these remotes. Used car dealer had no info . Remnotes start engine but shuts off as son as any door is opened! I am looking for info on how it works - a user guide or better yet installation manual as I used to install this equiopment back in my youth 80-90's LOL and know automotive electrical systems very well. Any resources you can point me to?
Awesome! Worked perfectly for my mazda.
This works for me today
2006 Jeep Grand Cherokee limited V8 4.7
Thanks
In this video you mention stepping on the brake pedal, releasing the brake pedal and releasing the programming switch. When is the programming switch depressed - before or after turning on the key?
Robert Hartmann hold the program switch as you turn the key and press the brake.
dosnt work for me bibp 3 times but the remot is not working
I can’t seem to find the programming button on a 2011 Lincoln MKT push to start.
I'm totally gonna try this (wish me luck) If I don't post my results within 24 hrs my car 2012 Escape Blew up and took me with it)
I already have the factory ford remote start system with a 1-way fob; if I buy a 2-way fob will it work or do I need to buy a different antenna?
Did you ever get an answer to this question?
Worked Perfectly!!! Thanks!
2013 Ford Fusion Hybrid. Cannot fine programming switch for the life of me. Do the stealerships always install, or do they sometimes leave out so you must return and pay for programming?
Hey do you have a video or and help on valet mode for these remotes? Mine doesn't start the car it just beeps. Someone told me it might be on valet mode
I tried. I did everything correctly but after I try to start the truck I get back 3 honking and the truck doesn’t start. Any idea or it’s me keeping doing wrong
Never says what to do with the remote switch just to release it ,do you press it in with the break pedal?
I have a 2012 MKZ that I bought used and it came with the GOH-PCMINI remote but the vehicle won’t start using it. Where would this switch be located and how can I fix this ?
Brother. I have 2010 mustang GT which came with 2 stock remotes (lock unlock + engine start). I want to upgrade both my keyfobs to 1 single keyfob which can all in 1. Can you help and advise how do I do that?
Is are there a kit for it or it is in the car from the factory?? And is it work on 2014 Mustang ?
I'll have to do that when I get back into the town where my 09 Escape is at
(Truck driver)
Hello is this work on Ford Fusion 2012 hybrid i have one key work but the other key need battery I afraid it’s-not sync to my car what should i do if it’s not sync
Please advise
Has anyone does this for their 2010 ford escape?
Worked for my 2011 Ford Taurus
ok... in the mopar systems is the programming button on a gray wire with a female end? if so mine is either missing or broken off.
+Kevin Burgess sounds like it..
How do I make my truck stay started longer it shuts off to quick when I use the car starter
My 2007 Honda Pilot's remote key stopped unlocking , can't get into my car even using the key manually, please help. Only have driver side key hole...
GOOD VIDEO LESSCO! Found it while searching for something else. Is there a way to program my 07 Dodge remote key to also start my vehicle without having to carry the remote control also?
yes, you can use a factory add on starter like the plug and play kits we have on our site, you hit lock 3x to activate it.
I'm having issues in my 07 Subaru Outback finding the programming bottom can someone help me please
Hey Lessco, would you and could you do a video on how to program a 2008 Malibu remote transmitter using the scan tool. I think that all of us who owns a 2008 or later model Malibu knows there are only two ways to do this, which is either go to the dealership or go to a car locksmith. By showing all of the Malibu viewers who own a 2008 or later model how to use the scan tool to program the remote , hopefully we can purchase a scan tool and do it our self. Please Lessco, make a video on this issue. Your video would be a first, and I can ASSURE you that you would get so many hits on the video that it would just blow your mind. Thank you, and all of us are looking forward to seeing the video.
+LENOVOVO Ill see what I can do
Lessco Electronics All right Lessco!!!!! :-) :-) :-) THANK YOU!!! Thank you so VERY much!!! :-) :-) Have a great day! :-)
Very helpful thank you
will this work on a 2016 Ford Fusion?
I have this type of remote what I need to know is can the run time be extended?
Hey man I'm having an issue with my Code FCC Goh pcmini. 07 jeep. It starts but won't stay running. It keeps starting and stoping.
Do you have a check engine light?
I try and dosnt work
Will it work on a Ford Escape 2008
I did that but my gauges go thru the cycle then doesn't crank, 09 f150
Hello, would you be able to do a video on how to change the batteries in the Subaru GOH-PCMINI-4Q? Thanks so much!
+Candace Morey that remote opens like a clam, just pry it open with a thin tool and youll see the battery in there
Thanks!
This won’t work for a Subaru with an OEM remote start system, they don’t have programming buttons. To program a new fob for any Subaru with an OEM remote start model year 2011-2016 are as follows (2017-current should be a similar process) tested and works
Programming Instructions
1) hold the drivers door open and keep it open thru the process.
2) step on the brake pedal and keep it depressed thru the proceess
3) turn the ignition key from "lock" to "on" 3 times quickly, ending up in the "on" position. This will not work if the key is turned slowly.
4) The lights will flash and the horn will honk 3 times to indicate remote start is in the programming mode.
5) press the remote start button once.
6) the horn will honk once to indicate the fob is programmed
7) Repeat step 5 to program additional fobs.
8) Turn the key to "lock" to exit programming mode. If you're using a used fob, it might be a good idea to replace the battery before programming.
Bro is this true with 2011 chevrolet? Thanks
I can’t find the switch on mine 2014 f150 platinum
My does not work it bips 3 times and it wont star, what should i do?
I have one that doesnt work it tries to start and then the horn honks 6 times what could be wrong with it? I have the small ford one
That means it's in valet mode. Check your manual and shut off valet mode. Then, tada, you have remote start again
This worked the day I did this, but the next morning and thereafter it sets off my alarm system
I have a 2010 MKT(push start). THe remote start button is a GOH pcMini. How do I make it not die when door is opened after remote starting?
Also, how do I program a new remote start button?
Hi did you ever figure out an answer for your question?
The best
Anyone find the program button on the lincoln navigator? 2010...cant locate it.
Try and pull the drivers kick panel by your left knee (plastic trim panel, clipped in at top, bolted on the bottom). It's located a little ways back behind the power pedal switch. Wires are all taped up tight. You should be able to leave panel screwed in on the bottom and have enough give to reach the switch. You can leave the door open while programming.
I did on my 2012 L it’s right under the dashboard close to the spot where you plug up a scanner
Where can I buy one of these? Mine was destroyed
Try seller fordtruckworld1983 on ebay. I've bought several and all have worked well.
charles lambing thanks man!!
I can't find the programming button in my ford focus
me either, did you find it?
Its A wire with a button on the end of it
What's it mean if it keeps once and don't start
I'm trying to send you an email but it won't go thru
I did all the steps and told me to do and it's still not starting
Wait that wire is already in my Ford expedition already
hello, how can i take off valet mode on a 08 mazda cx 7?
call code alarm / audiovox tech at 631 231 7750
It beeps and stops
Just for the record my program switch on my Sebring was hidden under my dash but it looks exactly like what he showing ya I'll try and take a pic of mine to show ya what to look for cuz I'm just a Dumbass and I found it, so I'm sure you'll find it if I show ya mine hang tight I'll take a pic.
I can't connect the pic sorry
It was working now it stopped
My car keeps turning on and off
try relearning the tach signal, if you need tech help call audiovox at 631 231 7750