Це відео не доступне.
Перепрошуємо.
How To Use a Process Meter - (5 Step Guide to Source / Simulate 4-20mA)
Вставка
- Опубліковано 31 жов 2020
- In this video I show you how to use a process meter to source or simulate 4- 20 mA using a fluke 789 process meter on Instrumentation loops.
I also talk about the different modes and how to determine the setup of aa current loop.
In this video, I’m going to show you an easy to follow 5 step guide to using a fluke 789 process meter - for sourcing or simulating 4-20mA loops, perfect for a whole host of instrumentation calibration and fault finding needs.
Quickly, before we move onto to the steps on how to use the fluke 789. we should discuss the difference between sourcing and simulate modes.
Transmitters and other sensors that give 4-20mA signals are connected to a plc or other input device that reads the current within the loop. These current loops are usually 24v DC powered.
These Instrumentation loops can be either have the 24Vs powered from the input card or the transmitter is externally powered and it provides the 24Vs for the loop power.
When using a process meter in place of transmitter to test a loop you will need to use it in a different mode depending on what is powering the loop.
If the transmitter was supplying the loop power, you’ll need to source the loop.
If the input card or isolator is powering the loop, you’ll need to simulate the loop.
Lets now lets look at the steps you’ll need to source or simulate, afterwards I’ll go through a few tips how to identify how a 4-20mA loop is setup so you will know what mode to use.
Remember electricity is dangerous, so only work on equipment you are competent to do so! And always check the voltages you are working with.
▶▶Check out brilliant T-shirts / Merch at my store:
www.redbubble....
▶▶Check out my website for more articles on Instrumentation:
www.instrument...
▶▶ Amazon Affiliate link to Fluke 789 - amzn.to/3fhDQWj
▶▶ Fluke 117 guide for voltage and resistance operation modes - • How to Use a Fluke Mul...
No music
Clear
Simple
And no much talk.
👍
Glad you enjoy the video and hope you found it useful, hopefully you subscribed :)
I just started an apprenticeship in which I thought I’d be doing nothing but electrical work but instrumentation is a huge huge part of what we do. I came from a commercial and residential background so this industrial stuff is so new to me. So much to learn about these instruments it seems
Same! I come from industrial work I went from 5 year electrical apprentice to 1st year automation totally different language!
If you need one of the best Process Meters on the market check out the price of the Fluke 789 here on Amazon! - amzn.to/3fhDQWj
▶▶Check out brilliant T-shirts / Merch at my store:
www.redbubble.com/people/rudd4y/shop?asc=u
▶▶Check out my website for more articles on Instrumentation:
www.instrumentationcontrol.info/articles
Another useful & informative video. Keep up the nice work!
Thanks Lee. Glad you enjoy!
Wooow, thanks a million times,
that was very explanatory, simple and straight to the point
This is excellent! Thank you for this.
You're very welcome!
Thanks for the useful information.
Glad it was helpful!
Could you do a tutorial using a Hart 475 with a Fluke simulator and press pump to do loop tests/simulations and calibrations on Rosemount flow, pressure, level and temp?
Great and informative review👍
Hi Bro, may I know what is the software you use to produce all this fantastic videos? Your videos are wonderful and full of values. Thanks.
Hi there. Thanks for your kind words. The software is called video scribe.
@@InstrumentationControl It must be very time consuming and taxing to produce videos like this...tough job but you do an amazing task. Thanks a lot
Any videos for using a hart 475?
Very useful
Glad you think so!
Muy buen video.
Saludos!!!!
Can this meter source/simulate 0-10vdc control loop systems? Does it have a 250 or 500 ohm resistor in it? 250 0-5vdc or 500 0-10vdc?
Hi there, this meter will only source mA. Of course if you can use an external 250 / 500 ohm resistor with this meter for your voltage inputs.
I've been a Industrial electrician for about 9 years but want to jump to being a instrument tech.. how can I start about that ?
Find a company looking to train a new instrumentation tech (hard)
Or go to school (easy but expensive)
thanks alot
No problem, hope it helped!
Sir can we connect single 4-20 ma to 2 sources?(i mean from single 4-20ma can we run 2things?)
Hi there, Yes we can have multiple devices in a single 4-20mA loop. A common use case is a field transmitter with a local digital display within the loop that is displaying the 4-20 the transmitter is controlling as well being connected to the control system for remote indication.
Thanks I’m trying to decide on a new meter. What’s the main differences between the 789 and 117 mentioned here please?
Hi James, The 789 will allow you to source and simulate 4-20mA current loops, if you work with industrial instrumentation then its the best version to go for. If you don't need that functionality then save yourself some money and go for the 117. If you do decide on either option please consider using my affiliate link in the description to amazon. It won't cost you anymore and helps my channel out :)
@@InstrumentationControl I’ll gladly support you. However I think I need one somewhere in the middle. Can you recommend one that can simply read 4-20mA and do you have a video on how to do so?
@@BoandBeceadventures It sounds like the Fluke 179 would be ideal for you James, it reads down to 0.01 mA on DC loops. Here's a link for you to use (my affiliate) amzn.to/3bYFfzF as for how to take a mA measurement if you look at my fluke 117 video there is a section for measuring mA, Its the same with the 179 only you have more resolution. The 117 only reads down to 0.001 Amps or 1 mA. No good for 4-20 loops. Hope this helps!
@@InstrumentationControl thank you I will look first thing tomorrow morning and if I do purchase I will definitely use your link. Thank you again
@@InstrumentationControl what do you think about this one and do you have a link for it Fluke 87V/IMSK Industrial Digital Multimeter with Fluke i400 Clamp Meter Combo Kit
💜💜
BUT WHAT ABOUT THIS >>>...You must need to connect negative terminal of transmitter to 400 mA(red probe) terminal and common probe to negative terminal of power supply to measure mA value.