Great video. . The ‘creeping cuts’ tip for using the mitre saw is gold. As a new mitre saw owner I’ve struggled to get accurate cuts. Cheers for that tip,
Well just found out the distance between my thumb and index finger is 6ins ( I'm only 5ft and petite!). As well as for DIY that will come in handy in my quilting and patchwork hobby, as well as for my gardening hobby when planting bulbs!! Thanks!
Hi Stuart. As a DIYer of over 40 years experience I'm always amazed by how much you know and how little I know ! Always learns loads from your videos. Keep 'em coming please. Huge thanks for sharing.
I bought my first house in 1985 and I’ve been a keen DIYer ever since. If only I could have seen this back then, I’m fairly sure I would have produced a lot les fire wood. All the tips are winners, but knowing the size of your hand is genius. Thank you. PS. Right thumb to ring finger…. 8” 😉
I've worked in the industry with lots from the US and all are used to working in metric so I think it's more the homeowners that are sticking to the old system. However, more and more I do hear m/mm being mentioned on US UA-cam videos so maybe gradually happening.
Having just retired last year I’m reinventing myself as a diy woodworker your channel is great so many tips and well explained video’s, great stuff many thanks
Having found myself without a tape when needing to measure something in a DIY Store I merely nip round to the ‘tape measure department’ and ‘borrow’ one - replacing it when I’ve finished… Works every time!👍
I’ve done all these tips for my entire career, put never realised I did until I saw this. I must have been taught them in my early years and they’ve become a natural action. So cool to be reminded why we do what we do. Top tips and very well presented.
Some good tips there Stuart. Despite knowing how to use measures myself and working in engineering for a while, I once managed to measure a shed 10cm longer than the concrete base I'd had laid out in my back garden. Thankfully the shed guys were great and they lopped 10cm off both sides enabling the back wall of the shed to come in and the roof now overhangs a wee bit. I was so embarrassed but we had a good laugh about it.
Another really useful set of tips. After watching I checked all of my tapes against each other by measuring a straight piece of timber and comparing - two gave exactly the same measurement but the others were out - one 5mm longer because the slider had been bent inwards at some point! I have now tweaked them all to give exactly the same measurement so if I do inadvertently pick up a different one it should be ok. I’ll periodically check and reset if required.
Brilliantly simple, simply brilliant, and importantly, easily applicable to everyday DIY situations. I nearly like it. And when A R Saker says that, it means it must be more than merely good, it's ace. Great stuff buddy, keep em coming.
I have 20 degrees C on my tape too. Really useful tips, thanks for sharing them - my favs being the perpendicular ruler tip - I would never have thought of that - and the other I should have thought of being the difference between the saw blade thickness and the tungsten tip. Great stuff.
Im quite sure navy bomb disposal divers use that last tip to inspect ordinance in low/no visibility circumstances. Another good video, the presentation is great!
Clear, concise and well demonstrated without music. Measuring internal spaces with a couple of sticks taped together also a good method as no need to creep up with the cut. 'Story sticks' in general really useful, but covered elsewhere. Hultafors Talmeter is the one tape measure that stands apart from the others - for me at least. Thanks Stuart.
as a DIYer i struggle using measuring tapes - esp the ends of the tapes where they become bent - anyhow great vid and tips - esp the last one - Dads genius tips..nothing better! Thanks
Thanks for the tips. Really appreciate it. The hand measure theme we use also as Asians. We callnit a GEET. the rest of the tips were useful. Please keep them coming as experience is a valuable source and very much appreciated. Kimd Regards Karamat Hussain
Great tips but when assessing where to cut in relation to the pencil line I'd add another mark because if I can forget anything in the time it'll take to cut it... it'll be which side to cut it.
Measure twice and cut once. With the tape measure as a cabinet maker, I would ensure guys I was training knew how to calibrate the end of the tape for exact internal and external measurements. I enjoyed this video mate.
Nice! I used to work in an industry where I used grease pencils. Of course, with a wide mark, you can't get an accurate measurement unless you start marking short and "color" up to the measurement. Then a tic on the keep side for which side is the measurement. Same concept as you used on the example with the sharpie, but I use it everywhere. Then it doesn't matter how wide your marker is as you're referencing the edge of the mark.
Very informative video Stuart, I would like to add when working with another person, it is important that you compare tapes. I worked in a small custom cabinet shop, we would check our tapes often.
Hi Stuart Two things I'd add. You mentioned that trimming a board with a plane is awkward. However you can quickly knock up a shooting board to use with your plane which makes it easy and quick. The other is if you don't have an old tape to use on your staff, self adhesive tapes are cheaply available on EBay etc. Thanks for a great channel. Ian
@@ProperDIY - Hiding from Covid-21. When I'm allowed out I've been looking for a plot of land on which to build another house - but everything is so slow at the moment... I just checked my tape - it says '1995', but I've never bothered to actually read this stuff... hahaha. I was taught decades ago to keep to one tape, but you explained it better. It was nice to catch up...
Well, the span between my thumb and forefinger varies by at least 10-15% depending on my mood and the stress I feel at work so I'll probably still have to fall back on a stress-free yardstick, I guess .) anyway, always getting pretty good tips in your videos - thx
Great video. . The ‘creeping cuts’ tip for using the mitre saw is gold. As a new mitre saw owner I’ve struggled to get accurate cuts. Cheers for that tip,
Glad it was helpful!
This tip really helped me fit my skirting more accurately 👍
Respected :
Very very good for those who are accuracy conscious.
Regards
Thank you
Final tip was brilliant
Thanks
Great tip with hand measure 👍
Well just found out the distance between my thumb and index finger is 6ins ( I'm only 5ft and petite!). As well as for DIY that will come in handy in my quilting and patchwork hobby, as well as for my gardening hobby when planting bulbs!! Thanks!
WoW!
The first two and a half minutes I've learnt more about a tape measure that I have in a lifetime!
Great!!!
Hello
I seen your DIY videos and it’s awesome .
Glad you like them!
so so so handy. thanks again for sharing.
Glad it was helpful!
Brilliant knowledge Stuart 👏
Thank you
Hi Stuart great video , my dad always said measure twice cut once then force it to fit , keep up the good work ,G.
Thank you
What fantastic information. Thing i didn't know. Thank you.
Hi Stuart. As a DIYer of over 40 years experience I'm always amazed by how much you know and how little I know ! Always learns loads from your videos. Keep 'em coming please. Huge thanks for sharing.
Many thanks - we are all still learning!
Great set of Tips 👍
Thank you , outstanding!
I bought my first house in 1985 and I’ve been a keen DIYer ever since. If only I could have seen this back then, I’m fairly sure I would have produced a lot les fire wood. All the tips are winners, but knowing the size of your hand is genius. Thank you. PS. Right thumb to ring finger…. 8” 😉
Nice one! I'm glad I've been useful
Gonna take a few tips from this one. Good video 😁
Glad it was useful
You are my favorite DIY Man I like watching on UA-cam that is you PROPER DIY (Stuart Matthew’s) is the best 😀👍
I never regret watching your videos as I always learn something new. Could you do a video on tuning up a mitre saw for super accurate cuts please.
Thank you. Yes - will do soon
Another fab video ... thanks for the superb tips
No problem
Excellent tips, i subbed because of it. Thanks.
Every day’s a school day. Some neat stuff there, thanks.
Thank you
Great tips TKS
I wish the US would catch up with the rest of the world
I've worked in the industry with lots from the US and all are used to working in metric so I think it's more the homeowners that are sticking to the old system. However, more and more I do hear m/mm being mentioned on US UA-cam videos so maybe gradually happening.
Awesome tips, thank you very much 😍
Super I’m the person walking around the shop with a tape measure going into the garage now to measure me hand 👍
Very entertaining and helpful. Your channel’s success is very well deserved.
Thank you so much 😊
I'm hooked and now have a Friday alarm to check for new videos!! Love it.
You really are putting the pressure on me now!
Having just retired last year I’m reinventing myself as a diy woodworker your channel is great so many tips and well explained video’s, great stuff many thanks
Nice one - I'm glad you're enjoying it.
All your tips are absolutely bob on.
I cut 370 pieces of ply at 800mm by the time this video ended. 🤣 Times money
“Really handy” 🖐🏻
Learned more again!! top vids
Great as usual. just off to measure my hand
Absolute gold. One of your best videos yet. Keep them coming.
Thanks, will do!
This is amazing I’m trying to cut alcove shelves where the walls aren’t even straight and it’s my first project
Really useful tips, thank you.
Describing the final tip as "really handy" made me laugh out loud too!
Glad you enjoyed it!
Thanks Stuart. All great stuff but I have the same feeling I had when I saw a video of a guy showing how to put together a set of 58 webbing.
Ha! An old contractor in the 80's taught me that last one too. A wise 'hand' he was. Brilliant.
Thanks. Once you know it seems obvious to do
That last tip was really handy
Love the last tip. I can honestly say I have never come across that one before! 👍
Glad to bring you something new
"and remember till next time... 8 inches" 🤣🤣 👍
👍
Some new and very useful tips there Stuart, thanks.
Having found myself without a tape when needing to measure something in a DIY Store I merely nip round to the ‘tape measure department’ and ‘borrow’ one - replacing it when I’ve finished… Works every time!👍
I’m 65 years old, and every day I’m realising how much I don’t know 😳 Thanks for the advice and ‘great’ tips from a new subscriber 🇦🇺
Welcome aboard
I can't believe this. I've just watched a video about tape measures, and thoroughly enjoyed it! Stuart, you're a genius!!
Glad you enjoyed it!
Very informative video
Great tips. Thanks
No problem!
Great tips especially measuring with your hands and the mitre saw tip
Glad you enjoyed it
Thank you, this is really helpful.
Glad it was helpful!
What a guy! Great tips. Keep them coming 👍
I’ve done all these tips for my entire career, put never realised I did until I saw this. I must have been taught them in my early years and they’ve become a natural action. So cool to be reminded why we do what we do. Top tips and very well presented.
Thank you very much
A very educational video ,cheers m8
Thanks
Another great video. The mitre saw tip is ace. Thanks.
Glad you enjoyed it
As someone who used to hold a staff for a engineer ( those were the days ) I like the tip for a tape measure staff .
Thanks. I used to be the engineer!
Every time I hear your intro jingle it just makes me smile!
Me too - and I hear it quite a lot!
Great tips, thanks! Especially the mitre saw one.
Great video. Really added value to my DIY. Thank you Stuart.
Glad it helped
Wonderful tips, thank you very much Sir. You are a PRO!!
Thank you
Thank you
That last tip 👍🏻I'll be using that!!
Glad it was helpful!
Absolutely brilliant. Some great tips from an engineer.
Glad you think so!
What you’ve demonstrated is that precision is often more important than accuracy.
Some good tips there Stuart.
Despite knowing how to use measures myself and working in engineering for a while, I once managed to measure a shed 10cm longer than the concrete base I'd had laid out in my back garden. Thankfully the shed guys were great and they lopped 10cm off both sides enabling the back wall of the shed to come in and the roof now overhangs a wee bit. I was so embarrassed but we had a good laugh about it.
Thanks! It's easily done
I learnt the hand trick from my father too - rather handy! Pun intended.
Stuart your tips and explanations are really useful and was not aware of quite a few of them and as an amature diy very helpful.Love your vlogs.👌👍
Glad you like them
Great video Stuart. Especially the tip for sub base gauge marking.
No problem
Great info.
Glad it was helpful!
Old way's the best way 🖖
Another really useful set of tips. After watching I checked all of my tapes against each other by measuring a straight piece of timber and comparing - two gave exactly the same measurement but the others were out - one 5mm longer because the slider had been bent inwards at some point! I have now tweaked them all to give exactly the same measurement so if I do inadvertently pick up a different one it should be ok. I’ll periodically check and reset if required.
Fantastic tips. Thanks for sharing.
Glad it was helpful!
Thanks Stuart great tips will be using one tape per job in future 👍👨🏻🏭
No problem 👍
By heck. Great stuff. As ever. Thank you from Singapore.
Thanks for watching! I used to live in Singapore - ECP!
Incredible info's!
Glad you think so!
@@ProperDIY you're explainations are simple, straight forward and easy to comprehend,thank you!.
Brilliantly simple, simply brilliant, and importantly, easily applicable to everyday DIY situations. I nearly like it. And when A R Saker says that, it means it must be more than merely good, it's ace. Great stuff buddy, keep em coming.
Thank you very much!
First class thanks
No problem 👍
I have 20 degrees C on my tape too. Really useful tips, thanks for sharing them - my favs being the perpendicular ruler tip - I would never have thought of that - and the other I should have thought of being the difference between the saw blade thickness and the tungsten tip. Great stuff.
Glad it was helpful!
Im quite sure navy bomb disposal divers use that last tip to inspect ordinance in low/no visibility circumstances. Another good video, the presentation is great!
Thank you. Really - maybe where my dad got it from
Great tips, I showed my missus the last one about measuring with a body part, she still doesn't believe it was 8 inches...😂
Difficult in B+Q !!!
Great learning tips always learning from you thank you 🙏
My pleasure!
Clear, concise and well demonstrated without music. Measuring internal spaces with a couple of sticks taped together also a good method as no need to creep up with the cut. 'Story sticks' in general really useful, but covered elsewhere. Hultafors Talmeter is the one tape measure that stands apart from the others - for me at least. Thanks Stuart.
Glad you enjoyed it!
as a DIYer i struggle using measuring tapes - esp the ends of the tapes where they become bent - anyhow great vid and tips - esp the last one - Dads genius tips..nothing better! Thanks
Glad it was helpful!
Thanks for the tips. Really appreciate it. The hand measure theme we use also as Asians. We callnit a GEET. the rest of the tips were useful. Please keep them coming as experience is a valuable source and very much appreciated. Kimd Regards Karamat Hussain
Great tips but when assessing where to cut in relation to the pencil line I'd add another mark because if I can forget anything in the time it'll take to cut it... it'll be which side to cut it.
Measure twice and cut once. With the tape measure as a cabinet maker, I would ensure guys I was training knew how to calibrate the end of the tape for exact internal and external measurements. I enjoyed this video mate.
Thanks
Some great tips there Stuart. As a new subscriber I love to watch your videos. Keep the great information and tips coming.
Thanks and welcome
nice video great tips
Thanks
Nice!
I used to work in an industry where I used grease pencils. Of course, with a wide mark, you can't get an accurate measurement unless you start marking short and "color" up to the measurement. Then a tic on the keep side for which side is the measurement. Same concept as you used on the example with the sharpie, but I use it everywhere. Then it doesn't matter how wide your marker is as you're referencing the edge of the mark.
Great point!
Fantastic tips, thank you 👍
No problem 👍
Very informative video Stuart, I would like to add when working with another person, it is important that you compare tapes. I worked in a small custom cabinet shop, we would check our tapes often.
Great point! Sounds strange to some but worth the 30 second to do it
Thanks for another clear and insightful video. I’m off to measure my hand. 😉
Go for it!
Hi Stuart
Two things I'd add. You mentioned that trimming a board with a plane is awkward. However you can quickly knock up a shooting board to use with your plane which makes it easy and quick. The other is if you don't have an old tape to use on your staff, self adhesive tapes are cheaply available on EBay etc. Thanks for a great channel.
Ian
Thanks. Good points!
@@ProperDIY Even IKEA has those paper measuring thingis hanging around everywhere. Maybe they are accurate enough??
@@SteifWood Class 3 I would guess!
Brilliant
Another excellent video
Glad you enjoyed it
Sorry to be late to the party... but a very interesting and useful vlog. Thanks.
That's ok. Better late than never - where have you been?
@@ProperDIY - Hiding from Covid-21.
When I'm allowed out I've been looking for a plot of land on which to build another house - but everything is so slow at the moment...
I just checked my tape - it says '1995', but I've never bothered to actually read this stuff... hahaha. I was taught decades ago to keep to one tape, but you explained it better.
It was nice to catch up...
Useful video - thanks. Love the ending lol
Thanks
Great video , thanks
Very handy tips as always! I'm going to check out my tape measures today and only use one per project
Glad it was helpful!
Thank you dear, love your videos, always very informative and well explained…as always please stay safe
Thank you! You too!
Again, fantastic...
Glad you think so!
Great tips
Glad you like them!
A big tip at the end
Thanks
Well, the span between my thumb and forefinger varies by at least 10-15% depending on my mood and the stress I feel at work so I'll probably still have to fall back on a stress-free yardstick, I guess .)
anyway, always getting pretty good tips in your videos - thx
Don't forget that diamond