Before heading back down in the spring you should totally take a leg via the Åland and Finnish archipelago, lots of neat places to explore and plenty of natural harbours for free anchoring! Very very nice sailing.
As I’m a UA-cam sailor, from a Landlubbing farmer family, I enjoyed the explanation about the starboard tack. I enjoy learning sailing info from your videos, Thanks Sam!
Sweet video, when you reconnect the wires to your mast maybe install quick disconnects. That way you don't have to cut them again. Looking forward to your next videos. Cheers.
Sam its been great following your videos from you left usa, its been a great achievement for you. As for the yanmar cold start problem, if it were my engine i would aquire an eberspacher or mikuni diesel air heater glowplug and drill and tap a threaded hole in the air intake manifold and fit the glowplug in. Wire it through a relay from ignition circuit so it heats while holding key in crancking position and disconnects when engine starts. Probably a preheater element from an older tractor might be better as it wouldent draw as much current. Certainly would improve cold starting. Not been critical but would advice renewing raw water filter before it disentegrares and leaves u in the brown smelly stuff. Im a great believer in the 6 P,s Im preparing my boat for a cruise to orkney & shetland from the clyde this year. Enjoy your break.
That's a good tip, thanks. Never would have thought to modify the engine to have a glowplug. Another option I can see would be to get a secondary switch for the plug, or to change the ignition switch to one with glowplug function maybe. That way you can warm up the plug before cranking, as it should be.
A testament both to Sam's abilities but also the soundness of the Cape Dory. That boat has taken good care of you, Sam. There should be a known fix for your cold start issue. Our Yanmar always fires up on the first crank in temps down as low as 25 deg F, even after being winter stored for 6 months. I would talk to a Yanmar tech.
Sam, just started following your channel. I live in New Mexico. In the past 25 years or so I have made 5 trips to west coast of Sweden for sailing. I have been as far south as Kungsbaka and north to Grebbestad. I have an old friend that has a summer house near Lysekil. I understand how the North Sea can get. Fair winds and following seas. Steve
Man I just wanted to let you know how much I enjoy your videos. While others spend 30% or more of their time with drone footage, canned music, intros, pictures of animal life, and other stuff., your videos just jump right into it. That’s the way it should be.
Sometimes I just sit in my chair and watch your videos and I am amazed that a local man is sailing the n a twenty eight foot boat. It just blows me away! You have accomplished a lot. By the way, a true Southern Gentleman never sails to windward in the ocean.
Let us know when you are back in the Gothenburg area, happy to lend a hand and buy you a beer! Your video simply pushing off the dock towards Hawaii was - the - watershed moment that made me buy a sailboat! Keep up the good and inspiring videos!
I had the same probelm with my diesel heater. its just a question of adjusting the fan. I put a washer or two under the screw that fastens the elctrical panel. That way the fan was adjusted a lot better to the sensor. The fan itself also had some casting residues, that initially rubbed against the sensor. I removed the residues with sandpaper and voila! A have no more errors...
I know it's kinda dumb, but I can't help feeling sorry for Pickle all alone in the cold. ☺️😁 I saw on Instagram you stopped by in Vienna. Hope you enjoyed the city. Thanks so much for all your great videos! Enjoy your days on land in the warm Florida weather. 🙂
Sam, I love your content.. and it's my dream to go sailing. I have plenty of money saved up to help out. Not buy my own boat, but to easily help out. I'd gladly be a crew mate if needed.
My MD7a volvo was always a little underpowered for theCD28. Your sailing adventures have delighted thousands. Looking forward to more miles under ther keel for you!
Sam thanks for the content enjoy your time on the land to recharge your personal batteries thanks for taking me around the Atlantic this past year I am landlocked in Northwest Pennsylvania and appreciated all of your videos good health to you.
Excellent idea to change the oil now. Get rid of all the acids and crud you don't want to work on the bearings while the engine sits for months at a time.
I have a small John Deere tractor with a Yanmar diesel. It has an electric air heater that preheats the intake so when starting, the intake air is warmed. It starts very well, even when below freezing. Maybe you can find and retrofit to your situation. Just a thought.
Wow! What a mighty wee vessel! I knew the numbers re her size, seeing her out of the water!? she's a brave and sturdy little ship. Have a great rest and Fair Winds come splash down!
Wow super clean bottom. You've been in cold water but you also crossed the Atlantic. Yeah... must be some good paint. Edit: do you remember the brand Sam? Thanks.
These videos are awesome. I've never sailed a day in my life but somthing about these videos are inspiring to a debt slave stuck in the system lol. Be safe man.
I seem to recall that when you solo sailed to Hawaii, you had not sailed a boat on anything larger than a lake or a bay! I admire what you have accomplished. In SA to do similar you require to pass your captains certification. For this reason, I would like to buy a US registered boat which is exempt from this requirement. I am bright enough to pass these exams but after I was run down by a truck, I have lost the ability to write legibly which kind of limits me!
Thank you Sam for bringing us on your adventures. I have to thank the UA-cam algorithm for suggesting your channel. I didn’t know that I needed this, but thank you again
Thanks for showing the actual movement of the boat while sailing and the noise. Sailing is not a static situation on a smooth road or noiseless! Best wishes for fair weather.
Sad you didn't have time to cross over to Thyboron and sail through Limfjorden in Denmark.... supposed to be beautiful. That's where I'm planning to sail this summer 🙂
My 2GM won’t start in the 40’s F. If I have electricity I heat fuel lines into injector with a hair dryer and point the hair dryer into the air intake. Starts right up
Sam, was taken aback when I saw that it was necessary to cut the mast electrical-wires. Anyway, do-not use simple spade quick disconnects unless you can 100% guarantee that there will be absolutely air-tight and no water ingress because they will quickly corrode. I would try and find some gas/water-tight locking connectors to permanently install (maybe in a watertight enclosure) if you feel you will ever need to disconnect in the future. If not, I would make strong mechanical connections with each wire (probably J-hooks since you don't have a lot of extra cable) then carefully solder each connection and then seal every wire and the bundle with fusion-tape--making sure you fill any air-pockets or voids (use plenty of tape and wrap the outside at least 6-8 inches each way from the splice). But whatever you do, the connections need to be gas-tight or you'll for sure get corrosion in the connections from constant sea-air and water. Q: Are you an Amateur (Ham) Radio operator; HF is a great communications medium and a good way to pass time when all your books, podcasts, and movies are stuck in the cloud--LOL? And if you lose your other electronics, it can save you in an emergency situation. When I was young I used to keep radio-schedules with several ships in both the Atlantic and Pacific. I would pass progress-reports, weather information and exchange welfare checks with their families using both voice and morse-code. This was all before modern GPS, and satellites were available. Really love your videos and your GREAT community of commentors--have learned a lot on you channel!
Love your content! Side note: The "Wind Mills" are called Wind Turbines lol. I'm actually going into the profession of repairing them, hopefully after some time I can buy a boat and do what you're doing. Love your content, keep up the great work!
My buddy did that for a while and he had 300+ travel days in a year. Salary was absolutely amazing but there's a limit to how many years you can travel 300+ days for sure.
Great adventure Sam, thank you for taking us along. You have inspired me to get into sailing and for that I truly thank you. Looking forward to your next adventure!
Looking forward to your Florida Bay/Everglades vids. We've camped/cruised our Hobie 18 from Tampa to Miami and all points between. Favorite ENP spots are Barnes Key anchorage, Rabbit Key, all the capes at Cape Sable, Flamingo, Highland Beach, Little Shark River into Whitewater Bay. SAiling the channels from Flamingo east towards Dump Key, Jimmie Channel, Captain Key and Crab Key. Watch the wind and tides so you don't get dried out in the upper reaches of the Bay. Good Luck, have fun
Most sailing vloggers head for the tropics in winter. You and the “Sailing Uma” couple are the only ones marching to the rhythm of a different drummer.
Sam: A lot of old school Direct-Injected Diesels....the owners would tap a hole in the intake to recieve GM style 9volt fast glow plug. Yes, those GM 9volt glow plugs get yellow real fast versus a 12volt glow plug. Usually in colder climates where people did that. Even Cummins then/now equip their direct-injected diesels with an Intake glow plug (just 1)...to stir up the air for extreme cold scenarios and cold-blooded engines. Just an idea for you to keep in mind. When time and weather allows....make sure to do as much preventive and necessary maintenance before you lower your boat back in the water. The water is no place to play Russian Roulette with stuff that needs to be looked at and fixed.
Sam, what a spectacular sailing season that was, well done, Eric the Viking has an awful lot of catching up to do to equal your ocean crossing explorations! Do you have any photos/plans or video of the fitting of your transom platform, they are so practical I think they should be on all sailboats where possible especially for singlehanders to assist boarding from swimming or dinghy’s! Does the wind vane operate beside it, they seem very close together? SkipRay.
Hello Sam always waiting to see your next videos but you have to make more videos what are we supposed to do? We are going to be doing our nails waiting for your next season but it's all good it is ever break I guess I remember productivity for your consumers and one of your favorite fans I guess I have to wait like everybody else. Anyway Sam stay safe my friend God bless you and enjoy your vacation we'll be waiting.
As for your diesel heater.. if its a Chinese copy you should probably carry two spares for it especially in colder climate. Or get the webasto version and have a little less worry. Maybe a aftermarket intake heater would help your cold start trouble. BD diesel makes one that looks straight forward to install.. BD Diesel 1041563 X-Flow Air Intake Heater Kit.
Sam, first time I saw you was in a tiny beach/kid dinghy? In southern California, and now you are in my neighbourhood!? (Zealand, Denmark) very cool! Have a good winterbreak bru.
When abouts are you planning on re-floating Pickled Herring? I enjoy your Vlogs and admire how you face your challenges. I was disabled in 1992 when a speeding truck wiped out my car after punching it into me, disabling me. I know that I cannot handle a boat much larger than 40 foot but you make smaller boats look easier to handle. I live in Zululand, South Africa and even in winter, the coldest it gets is maybe 18 centigrade. I get sea breezes warmed by the currents flowing South from the Equator so it is highly unlikely to ever snow here.
Re: your water tank inspection port, I installed the same inspection ports on my water tanks. Remove the ports and reinstall, but caulk first. I used Butyl rubber tape. The screw top should have an O ring so that is probably not the problem. The leaks are where the port screws into the tank.
I've found that even with a brand new inspection port of that type with the O-ring, they still leak if submerged unless you really crank them on ridiculously tight. We had to use a hammer and screw driver to pound-rotate the lid super tight to keep water from entering the bilge from our swim platform. Kind of defeats the purpose of being an inspection port. They seem to only be designed to keep casual water out, not submerged water.
Sam, I remember your episode when you bought your Cape.Dory 28 for 8500 bucks and it's just amazing that this budget boat took you on this journey! How much more do you estimate you had to put into her to get it up to ocean going status? Im considering buying a similar boat for even less amd was just wondering what I'm getting into.
Omg I’m literally down the fjord from you. My boat is on Tjörn at Wallhamn Marina. When you get back, there are thousands of anchorages, but I’m sure your Swedish friends will tell you 👍⛵️⚓️ Warren s/y Legend🏴🇬🇧
I am danish and come from Copenhagen, you should visit Denmark, you have to visit Kronborg Castle, and then sail into Copenhagen haubour, a lot of restaurants and people are son friendly, have a nice trip.
It would be awesome if you were coming up to the stockholm area for a while and check out the awesome archipelago before you're maybe hitting finland and going around that way and then south :)! I'm a big fan and have been following for quite some time now from stockholm, i got my maxi 77 up here in stockholm, which will go down in the water again in about 2 weeks :) You should have a stockholm meetup! :D
A shame you did not end up in Denmark! :D As a yanmar owner, I can sugest to renovate your cylinderhead. After I got this done, the enigne will start great in all weathers.
I hope you do the south coast of the UK and visit my home port of Plymouth, I can show you around the Plymouth steps and show you were the founding fathers boarded from on the barbican. Might be able to get you a few paragliding flights along the coast or Dartmoor. I can get you a free mooring for a few days, a trip to the Sciliies is thoroughly recommended from there! Enjoy your time off and relax your mind from the sea! But always wish you were back!
Before heading back down in the spring you should totally take a leg via the Åland and Finnish archipelago, lots of neat places to explore and plenty of natural harbours for free anchoring! Very very nice sailing.
And from Åland to Turku you can use my sauna and washing machine
I second that! Could take Göta Canal across Sweden for a different experience!
Agreed, it would be a shame to go this far and not go to the Finnish archipelago, late spring is a good time also.
I need a sauna.
Your heater isn't broken it has carbon build up. They are easy to take apart and clean . My heater had the same code and it was just carbon
A bit surreal to see you in my tiny childhood marina. Welcome to Sweden!
Same feeling here. From Hawaii to so familiar waters and marina. 😁
Vilken ort ligger marinan?
Sleep tight, Pickle. Enjoy the break, Sam!
As I’m a UA-cam sailor, from a Landlubbing farmer family, I enjoyed the explanation about the starboard tack. I enjoy learning sailing info from your videos, Thanks Sam!
You also have right of way over other craft under sail (within reason of manouverability ).
There's more .
Sweet video, when you reconnect the wires to your mast maybe install quick disconnects. That way you don't have to cut them again. Looking forward to your next videos. Cheers.
Sam finally turns on that motor. I think he is ready to get of that sailboat.
That shot of Pickle covered in snow was AWESOME! Don't worry, spring will be here before you know it! :-)
Sam its been great following your videos from you left usa, its been a great achievement for you.
As for the yanmar cold start problem, if it were my engine i would aquire an eberspacher or mikuni diesel air heater glowplug and drill and tap a threaded hole in the air intake manifold and fit the glowplug in. Wire it through a relay from ignition circuit so it heats while holding key in crancking position and disconnects when engine starts. Probably a preheater element from an older tractor might be better as it wouldent draw as much current. Certainly would improve cold starting. Not been critical but would advice renewing raw water filter before it disentegrares and leaves u in the brown smelly stuff. Im a great believer in the 6 P,s Im preparing my boat for a cruise to orkney & shetland from the clyde this year.
Enjoy your break.
That's a good tip, thanks. Never would have thought to modify the engine to have a glowplug. Another option I can see would be to get a secondary switch for the plug, or to change the ignition switch to one with glowplug function maybe. That way you can warm up the plug before cranking, as it should be.
Great video. If you don't mind giving out the information, what bottom paint did you use? It did a great job..
A testament both to Sam's abilities but also the soundness of the Cape Dory. That boat has taken good care of you, Sam. There should be a known fix for your cold start issue. Our Yanmar always fires up on the first crank in temps down as low as 25 deg F, even after being winter stored for 6 months. I would talk to a Yanmar tech.
Sam, just started following your channel. I live in New Mexico. In the past 25 years or so I have made 5 trips to west coast of Sweden for sailing. I have been as far south as Kungsbaka and north to Grebbestad. I have an old friend that has a summer house near Lysekil. I understand how the North Sea can get. Fair winds and following seas. Steve
Man I just wanted to let you know how much I enjoy your videos. While others spend 30% or more of their time with drone footage, canned music, intros, pictures of animal life, and other stuff., your videos just jump right into it. That’s the way it should be.
Hard to believe that little boat has all those miles on it. Great job 👏 Great videos
Rest well Pickle. See you next season. Thanks for sharing Sam!
Sometimes I just sit in my chair and watch your videos and I am amazed that a local man is sailing the n a twenty eight foot boat. It just blows me away! You have accomplished a lot. By the way, a true Southern Gentleman never sails to windward in the ocean.
Let us know when you are back in the Gothenburg area, happy to lend a hand and buy you a beer! Your video simply pushing off the dock towards Hawaii was - the - watershed moment that made me buy a sailboat! Keep up the good and inspiring videos!
Battens in your H16 sail makes a big difference in speed. I know they're a pain to put in but you should do it.
What a season! Great stuff.
It's been a great season of sailing! Looking forward to picking back up in May. Safe travels Sam!.
The white boat was very nice 👍
tack Niklas
Enjoy your break, Sam
It’s thirty years since I did any deep water sailing. Your vids help me relive some of the best times in my life. Cheers!
"Goodbye Denmark, we're going to Sweden" - too bad, hope you make it to my home country next season :-)
I had the same probelm with my diesel heater. its just a question of adjusting the fan. I put a washer or two under the screw that fastens the elctrical panel. That way the fan was adjusted a lot better to the sensor. The fan itself also had some casting residues, that initially rubbed against the sensor. I removed the residues with sandpaper and voila! A have no more errors...
I know it's kinda dumb, but I can't help feeling sorry for Pickle all alone in the cold. ☺️😁 I saw on Instagram you stopped by in Vienna. Hope you enjoyed the city. Thanks so much for all your great videos! Enjoy your days on land in the warm Florida weather. 🙂
Sam, I love your content.. and it's my dream to go sailing. I have plenty of money saved up to help out. Not buy my own boat, but to easily help out. I'd gladly be a crew mate if needed.
Where you from mate
USofA! Why?
Always bittersweet tucking the boat away for the winter. Looking forward to seeing the camping videos from Florida!
My MD7a volvo was always a little underpowered for theCD28. Your sailing adventures have delighted thousands. Looking forward to more miles under ther keel for you!
Sam thanks for the content enjoy your time on the land to recharge your personal batteries thanks for taking me around the Atlantic this past year I am landlocked in Northwest Pennsylvania and appreciated all of your videos good health to you.
Excellent idea to change the oil now. Get rid of all the acids and crud you don't want to work on the bearings while the engine sits for months at a time.
Thanks for all the good vids Sam. Take care Smooth Saling.
I have a small John Deere tractor with a Yanmar diesel. It has an electric air heater that preheats the intake so when starting, the intake air is warmed. It starts very well, even when below freezing. Maybe you can find and retrofit to your situation. Just a thought.
Pretty clever to go on the hard in Sweden. Springtime and some of the worlds most beautiful women might make for a great start to next sailing season.
All feminists.
Wow! What a mighty wee vessel! I knew the numbers re her size, seeing her out of the water!? she's a brave and sturdy little ship. Have a great rest and Fair Winds come splash down!
Wow super clean bottom. You've been in cold water but you also crossed the Atlantic. Yeah... must be some good paint. Edit: do you remember the brand Sam? Thanks.
These videos are awesome. I've never sailed a day in my life but somthing about these videos are inspiring to a debt slave stuck in the system lol. Be safe man.
I seem to recall that when you solo sailed to Hawaii, you had not sailed a boat on anything larger than a lake or a bay! I admire what you have accomplished. In SA to do similar you require to pass your captains certification. For this reason, I would like to buy a US registered boat which is exempt from this requirement. I am bright enough to pass these exams but after I was run down by a truck, I have lost the ability to write legibly which kind of limits me!
Thanks Sam , please keep posting and looking forward towards Spring when you sail again .
Thank you Sam for bringing us on your adventures. I have to thank the UA-cam algorithm for suggesting your channel. I didn’t know that I needed this, but thank you again
Also, could you place wire connections on it so that next time you have to cut them, it’s just a simple plug and play?
I can’t wait to see your Med adventures- something I aspire to do in retirement. I’ll be taking notes!
Thanks for showing the actual movement of the boat while sailing and the noise. Sailing is not a static situation on a smooth road or noiseless! Best wishes for fair weather.
Sad you didn't have time to cross over to Thyboron and sail through Limfjorden in Denmark.... supposed to be beautiful. That's where I'm planning to sail this summer 🙂
Love your videos !! seeing you on a Hobie brings back lots of memories... loved the rudders humming ..enjoy ...!
Thank you for taking us with you!
The most inspirational Florida man ever. My new favorite youtuber
The more I watch the more I love it
Hey Sam, I didn’t see you topping off your fuel tank. Hoping that you don’t have condensation in your fuel in the spring. That could be big problem.
Well on the good side, cutting the wires gives you a chance to put on some sealed detachable connectors so you won't have to cut them again.
Saving this for later after work! Love your sailing adventures. Jag lär mig svenska så exalterad inför detta äventyr.
Lycka till! Tack för du vill lära dig vårt språk :)
I like you'r video's. They are nice to watch because they are very calming.
My 2GM won’t start in the 40’s F. If I have electricity I heat fuel lines into injector with a hair dryer and point the hair dryer into the air intake. Starts right up
we are going to miss the Pickle! but have a fun winter!
Cool pickle, warm Sam, have a great winter, put up a wish list, man! Great season of sailing!!!!
I love the maintenance videos. Thank you!
Good video and I'm looking forward to your winter adventures.
I'd guess that an internal Crankcase Heater would be more effective than blowing hot air into the engine compartment external.
Sam, was taken aback when I saw that it was necessary to cut the mast electrical-wires. Anyway, do-not use simple spade quick disconnects unless you can 100% guarantee that there will be absolutely air-tight and no water ingress because they will quickly corrode.
I would try and find some gas/water-tight locking connectors to permanently install (maybe in a watertight enclosure) if you feel you will ever need to disconnect in the future.
If not, I would make strong mechanical connections with each wire (probably J-hooks since you don't have a lot of extra cable) then carefully solder each connection and then seal every wire and the bundle with fusion-tape--making sure you fill any air-pockets or voids (use plenty of tape and wrap the outside at least 6-8 inches each way from the splice). But whatever you do, the connections need to be gas-tight or you'll for sure get corrosion in the connections from constant sea-air and water.
Q: Are you an Amateur (Ham) Radio operator; HF is a great communications medium and a good way to pass time when all your books, podcasts, and movies are stuck in the cloud--LOL? And if you lose your other electronics, it can save you in an emergency situation. When I was young I used to keep radio-schedules with several ships in both the Atlantic and Pacific. I would pass progress-reports, weather information and exchange welfare checks with their families using both voice and morse-code. This was all before modern GPS, and satellites were available.
Really love your videos and your GREAT community of commentors--have learned a lot on you channel!
Thanks for another great video Sam. I love being a bird on your shoulder.
Thanks for the season!! Always sad when it's time to put the boat on the hard.
Love your content! Side note: The "Wind Mills" are called Wind Turbines lol. I'm actually going into the profession of repairing them, hopefully after some time I can buy a boat and do what you're doing. Love your content, keep up the great work!
My buddy did that for a while and he had 300+ travel days in a year. Salary was absolutely amazing but there's a limit to how many years you can travel 300+ days for sure.
Whatever you do, don't tilt at them
Great adventure Sam, thank you for taking us along. You have inspired me to get into sailing and for that I truly thank you. Looking forward to your next adventure!
Looking forward to your Florida Bay/Everglades vids. We've camped/cruised our Hobie 18 from Tampa to Miami and all points between. Favorite ENP spots are Barnes Key anchorage, Rabbit Key, all the capes at Cape Sable, Flamingo, Highland Beach, Little Shark River into Whitewater Bay. SAiling the channels from Flamingo east towards Dump Key, Jimmie Channel, Captain Key and Crab Key. Watch the wind and tides so you don't get dried out in the upper reaches of the Bay. Good Luck, have fun
No Drama Just Serenity🙏
Thx for all the posts.Its been great watching them all...
Thank you very much for a great season!
impressive and inspiring trip you have taken there. So you have to keep going when the heat and spring return.
Always better to change oil end of the season. The microscopic particles of engine metals in oil makes it acidic which causes further corrosion
Most sailing vloggers head for the tropics in winter. You and the “Sailing Uma” couple are the only ones marching to the rhythm of a different drummer.
Sam:
A lot of old school Direct-Injected Diesels....the owners would tap a hole in the intake to recieve GM style 9volt fast glow plug. Yes, those GM 9volt glow plugs get yellow real fast versus a 12volt glow plug. Usually in colder climates where people did that. Even Cummins then/now equip their direct-injected diesels with an Intake glow plug (just 1)...to stir up the air for extreme cold scenarios and cold-blooded engines. Just an idea for you to keep in mind. When time and weather allows....make sure to do as much preventive and necessary maintenance before you lower your boat back in the water. The water is no place to play Russian Roulette with stuff that needs to be looked at and fixed.
Thank you for the journey Sam...
Sam, what a spectacular sailing season that was, well done, Eric the Viking has an awful lot of catching up to do to equal your ocean crossing explorations! Do you have any photos/plans or video of the fitting of your transom platform, they are so practical I think they should be on all sailboats where possible especially for singlehanders to assist boarding from swimming or dinghy’s! Does the wind vane operate beside it, they seem very close together? SkipRay.
Hello Sam always waiting to see your next videos but you have to make more videos what are we supposed to do? We are going to be doing our nails waiting for your next season but it's all good it is ever break I guess I remember productivity for your consumers and one of your favorite fans I guess I have to wait like everybody else. Anyway Sam stay safe my friend God bless you and enjoy your vacation we'll be waiting.
Sweet. I'm looking forward to off season Sam videos
As for your diesel heater.. if its a Chinese copy you should probably carry two spares for it especially in colder climate. Or get the webasto version and have a little less worry. Maybe a aftermarket intake heater would help your cold start trouble. BD diesel makes one that looks straight forward to install..
BD Diesel 1041563 X-Flow Air Intake Heater Kit.
Great end to your season. I've enjoyed the videos and looking forward to the coming season.
Sikaflex is your freind just give a good layer on the water tank and is good
My Yanmar 3GM30F starts fine in all weathers , no gloplugs, think yours needs overhaul
Welcome to Sweden! Let me know if you plan to make a stop in Lomma this spring.
Yes please post the Hobie Cat and Glider rating stuff!
Thx for a great voyage
Sam, first time I saw you was in a tiny beach/kid dinghy? In southern California, and now you are in my neighbourhood!? (Zealand, Denmark) very cool!
Have a good winterbreak bru.
When abouts are you planning on re-floating Pickled Herring? I enjoy your Vlogs and admire how you face your challenges. I was disabled in 1992 when a speeding truck wiped out my car after punching it into me, disabling me. I know that I cannot handle a boat much larger than 40 foot but you make smaller boats look easier to handle. I live in Zululand, South Africa and even in winter, the coldest it gets is maybe 18 centigrade. I get sea breezes warmed by the currents flowing South from the Equator so it is highly unlikely to ever snow here.
Re: your water tank inspection port, I installed the same inspection ports on my water tanks. Remove the ports and reinstall, but caulk first. I used Butyl rubber tape. The screw top should have an O ring so that is probably not the problem. The leaks are where the port screws into the tank.
I've found that even with a brand new inspection port of that type with the O-ring, they still leak if submerged unless you really crank them on ridiculously tight. We had to use a hammer and screw driver to pound-rotate the lid super tight to keep water from entering the bilge from our swim platform. Kind of defeats the purpose of being an inspection port. They seem to only be designed to keep casual water out, not submerged water.
Have a nice winter. Thank you for your videos!
Sam, I remember your episode when you bought your Cape.Dory 28 for 8500 bucks and it's just amazing that this budget boat took you on this journey! How much more do you estimate you had to put into her to get it up to ocean going status? Im considering buying a similar boat for even less amd was just wondering what I'm getting into.
Yes, he does the sell the boat and the fever well. I’m in the same situation as you and have the same question
Sam it was great seeing you at the home depot if you ever need a hand I would volunteer
Omg I’m literally down the fjord from you. My boat is on Tjörn at Wallhamn Marina. When you get back, there are thousands of anchorages, but I’m sure your Swedish friends will tell you 👍⛵️⚓️
Warren s/y Legend🏴🇬🇧
I am danish and come from Copenhagen, you should visit Denmark, you have to visit Kronborg Castle, and then sail into Copenhagen haubour, a lot of restaurants and people are son friendly, have a nice trip.
not forget Christiania
If you are planning a leg in Finland after the winter, you are welcome for some sauna, wash, anchor and dinner in Pellinki archipelago
It would be supercool if you could visit Hallberg Rassy when you get back to Orust.
Sam, hands down you have the best sailing UA-cam videos. Hopefully one day you will earn enough from your channel to buy a slightly updated sail boat.
Very good video!
Thanks!
Thanks for video.
What is the roofheight in your boat. Looking quite roomy inside.
too bad about the heater..recall you got a cheap Made in China model... enjoy your break and look forward to new videos!
It would be awesome if you were coming up to the stockholm area for a while and check out the awesome archipelago before you're maybe hitting finland and going around that way and then south :)! I'm a big fan and have been following for quite some time now from stockholm, i got my maxi 77 up here in stockholm, which will go down in the water again in about 2 weeks :) You should have a stockholm meetup! :D
that's a really nice mast crane! my old marina had an old telephone pole with a makeshift boom. tricky even with a couple of people.
A shame you did not end up in Denmark! :D
As a yanmar owner, I can sugest to renovate your cylinderhead. After I got this done, the enigne will start great in all weathers.
I hope you do the south coast of the UK and visit my home port of Plymouth, I can show you around the Plymouth steps and show you were the founding fathers boarded from on the barbican. Might be able to get you a few paragliding flights along the coast or Dartmoor.
I can get you a free mooring for a few days, a trip to the Sciliies is thoroughly recommended from there! Enjoy your time off and relax your mind from the sea! But always wish you were back!
Sweden is popular. I only watch two sailing channels, and both of you are wintering in Sweden.
which is the other channel?