Acura MDX Clicking NOISE when turning Right front AXLE replacing guide with torque specs

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ •

  • @michaelrausch6950
    @michaelrausch6950 2 роки тому +3

    Nice video. No alignment needed because you didn't really change or move anything just unbolt, right?

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому +1

      Yeah we didn’t bother the adjustment bolts

  • @tsw808
    @tsw808 2 роки тому +2

    Perfect video, just in time to learn and do it myself this wknd. Where did you tap the axle out with the pry bar? There is barely any location and space to get a good force to tap it. Thanks

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому +1

      It got space more than enough that’s all u need in the bottom

    • @tsw808
      @tsw808 2 роки тому +1

      @@RBTheMechanic does a bad axle makes a clunking sound when driving on uneven road? I just had it replaced in the summer, not sure if it’s a defective axle. It’s a after market part thou. Thanks

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому

      @@tsw808 no it could be like joint ball joint arms

    • @tsw808
      @tsw808 2 роки тому +1

      @@RBTheMechanic I found the stabilizer bar bushings was worn, replaced it and the sound is gone. Thanks for the reply.

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому

      @@tsw808 good job

  • @Mitch-nz2iz
    @Mitch-nz2iz 2 роки тому +2

    After watching this video and the last 1 and it being warm enough to drive with window down I've noticed clicking only while backing up hard left (left front), looks like I'll be doing CV replacement soon.

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому

      Yeah I got 2009 accord comming next week not axles!!!

  • @АмиранАсамбиани
    @АмиранАсамбиани 5 місяців тому +1

    Good day to all. Please tell me the oil needs to be drained from the automatic transmission when replacing the inner CV joint. Honda Odyssey 2013 3.5 v6.

    • @RBTheMechanic
      @RBTheMechanic  5 місяців тому

      Dealer they will tell u and sell u use original only

    • @АмиранАсамбиани
      @АмиранАсамбиани 5 місяців тому

      @@RBTheMechanic Should the oil be drained from the automatic transmission or not, or will it stay there?

  • @Random.Adventures.
    @Random.Adventures. Рік тому +1

    curious is it common for rack and pinion to lealk on these and do you happen to have a vid for it

  • @robertogonzalez4463
    @robertogonzalez4463 Рік тому +1

    excuse me for the question, I have a 2007 mdx, I need to change the ball joints, can I just change the ball joints? Or do I have to change the entire lower arm? Thanks for your answer and for your videos.

    • @RBTheMechanic
      @RBTheMechanic  Рік тому

      Ball joint is part of control arm so it will need to be replace with arm

  • @shihw9082
    @shihw9082 2 роки тому +1

    Hello, any idea why my 08 mdx passenger axle keeps popping out loose after it was replaced? Just notice the gap that connects the mid shaft today after doing an oil change. Any advice is appreciated. Thanks

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому +1

      Could be wrong axle really the axle dosent have space to pop out

    • @shihw9082
      @shihw9082 2 роки тому +1

      @@RBTheMechanic the auto store confirm it’s the corrects axle. I was thinking the c clip that’s locks the axle in may need to be replace? Thanks for the reply.

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому +1

      @@shihw9082 could be if it’s tiny tiny bit like thickness of nickle coin it shouldn’t be issue

    • @shihw9082
      @shihw9082 2 роки тому +1

      @@RBTheMechanic that is about the gap I see. So I will leave it as is for now. I plan to replace the right side motor mount. Any brand you recommend? Thanks for your fast reply.

  • @johnmiller4979
    @johnmiller4979 2 роки тому +2

    Great video, but the sound needs improvement, matbe too much wind or mike quality poor

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому

      Yeah it’s my shop heater and I’m in street
      Intersecons traffic both sides

  • @cristianrivas7540
    @cristianrivas7540 Рік тому +1

    Easy taking it off on a lift but kicking my butt on a floor Jack