MIDI is a powerful tool, allowing us to control complex hardware and software easily, but what is it? We take a look at a MIDI controller footswitch to see how MIDI can be utilised for guitars in this Too Afraid To Ask video. Meloaudio MIDI Commander: meloaudio.com meloaudio.com/products/meloaudio-midi-commander-guitar-floor-multi-effects-portable-usb-midi-foot-controller-foot-switches Leave your own TATAs in the comments section and perhaps they'll become the topic of a future video. More from CSGuitars: Gain access to exclusive content at: www.patreon.com/csguitars Buy CSGuitars Merchandise: www.csguitars.co.uk/store Website: www.csguitars.co.uk Contact: colin@csguitars.co.uk
CSGuitars what amp sim do you use? I used amplitube 4 whitout an interface and it worked great hadn’t a lot of latency but now something glitches whit it and there is like 3 seconds of latency now. So I’m looking for an alternative also because I didn’t really like its interface!
dONTE KNOW IF YOU HAVER EVER BUILT THIS SETUP BUTT.... Actually if an MPE midI pickup is applied to a guitar, the guitar notes can activate effects... Literally 1 set of effects per note! Then if you applies the newish Perfect tuning systems like Evertune (ie. removing detune bends) the bends can also activate effects (also activating auto bending and detuneing yah crazy butt were controlling with midi)! aLSO TO NOTE:THE GUITAR would effectively have the capacity to in time with the guitar score control a keyboards synth plus...... drumroll any other equipment via midi aka the Midi tech plays lead guitar... Plus we could finally get to full use of Guitar voltages as synth input!
dude, this is actually incredibly helpful. I have a Randall with a midi foot switch, but I have had no idea how to use. It has literally been sitting there since I bought the amp. Like you, my amp has way too many tone options, and it is impractical to use while playing. Now I know how to use that midi switch to get the different tones I have dialed in. Love the TATAs!
it can do everything as long as you don't necessarily care about how it does it -- the availability of only 128 values for CCs/etc is a rather frustrating limitation that severely diminishes the value of MIDI for certain applications =/
I’m relatively new to playing guitar and I’m drawn to your channel more and more. You do a fantastic job of clearly explaining guitar tech. Thanks so much Colin for the content you post!
You forgot the best use, using MIDI with a backing click to change your amp live without ever having to touch a pedal board. That's what I use MIDI for so I don't have to pedal dance and play and sing.
According to my research, this can also be used to control lighting effects as well, which actually would be the main reason I would play to a click, so that I can perfectly synced with a pre-programmed light show.
@@reaganharder1480 We do that as well. The only downside, the only device that converts MIDI is a DecaBox. Expensive and high learning curve. But if you are running a laptop at the same time you can avoid it.
I think i subbed over a year ago. But this series of videos has been the most helpful thing i have ever found on the internet to expand my recording and understanding of equipment, I've been trying to find and learn this type information. But it feels like everywhere I go I'm digging through blog posts, digging through forums, or I'm digging through manuals to try to figure out what these things mean/do. There's no simple tutorials with these visuals etc. This literally opens up the whole world for me, to get the equipment that I actually want, and get the equipment that I actually need, to make the music I want to make. I know that's long-winded but I really want to say thank you I can't tell you how much this series has helped me already and how much it will help me in the future once i start uploading a lot more my music, I'll probably tagged you in some stuff or send my appreciation via the descriptions. This honestly is going to change my career when it comes to making/performing music. Thank you. Thank you. Thank you. Thank you.
When I need to know something I come to this channel! Thanks dude It’s true I ignored midi and only knew the connectors were midi. That’s where my midi world started and ended lol
The single most informative summary of MiDi I've ever heard. I may revive my 1980 zoom 4040 and invest in a midi cable as a result. It will feel like something new to me. Exciting. Thanks Colin!
The Voodoo Lab Control Switcher can turn any amp channel switching into a midi signal. This works great for those of us still using traditional non-digitized/midi amps.
Nice commercial. I'm not being funny. I always watch your videos because you give me the most learn for my click by doing all the research I would have done. Cheers! Will DEF add to my pedal board.
You’re cracking me up, dude. So true about guitarists and our preferred tech! Just inherited a MIDI controller and no clue how to use it. Your vid helps. Cheers!
OMG now it makes sense :) I've heard other people talking about how they use MIDI FX pedals but I always thought it was like a multi FX pedal like a zoom GFX8. Thanks :)
Great video. I really believe that MIDI and modeling amps are the best way forward for us musicians. I'm a bass player and just bought one of fenders bass amps with a modeler and the thing is incredible I can dial in the exact tone in my head and run a USB line out to my laptop. Using one bass and baritone guitar I've tracked for metal, rock, hip hop and country sounds. I will be looking to upgrade further when I get a new laptop.
I have an ES-8. The interface is shit and annoying because you constantly have to click through a million menus, but it can do EVERYTHING and will never fail you once you figure it out. YMWV, but I had to add an EB Tech Line Level Shifter in the loop to adjust the levels of my main tube amp (Randall RT100) signal which was way too hot. That amp also didn't play nice with the ES-8's latching/momentary channel switching (it would "chirp" when switching high gain channels), so I got a Voodoo Lab Control Switcher which turns channel switching into a midi signal that the ES-8 controls without issue. But, my backup solid state plays nice with the ES-8 out of the box without having to add anything (it doesn't have midi either). On the ES-8, I have every patch send an actual latching channel switch signal as well as a midi channel switch simultaneously so it can work with my main and backup the same. I rewired a footswitch cable from my backup to mirror the channel switching of the Control Switcher, so if my main ever goes down, I just have to swap out 3 of the 4 cable method and plug in the footswitch cable into the ES-8 and I'm back and running without having to change any settings.
An interesting note on those MIDI jacks/cables with the 5 pin DIN. Old School Soviet era musical equipment also used a 5-pin DIN as their primary jack, and it is very similar but not the same as the 5 pin DIN MIDI jack.
Great topic. and Just to pile on a little more as to just how good of a guitar friend MIDI is...... haha: A guitar performer can also use a MIDI controller to run a DMX light show, or change patches on your effects units like these cheapo lexicon rack effects I have(same idea as the amp in the vid), or trigger sound effect samples, or play bass/drones/pads with a MIDI foot controller like a 12-step, ALL while playing your guitar.
Another thing you can do with MIDI is program it in advance, such that all you have to do on stage is stay synced with it, and your pre-programmed track will do everything else for you.
Hail Colin, Tackler of TATAs! Little off topic here, but your watch is badass, bro. And you definetly make it worth tpo stay until the absolute end of the video everytime :D
not sure if you are playing heh, but they are working on it. The original MIDI is from the early 80's and they used that monster DIN like original PC keyboards used. They also used a serial-data protocol that was pretty inefficient regarding power waste and it was slow. 220ohm current sink resistors holy crap what a waste. Today it could be gigaherz through a 1megohm circuit that was lightning fast and uses basically no juice. the data packet size could be increased 100x if needed. so IMO this 30 year old convention definitely needs an upgrade
@@certifiedpossum8655 I do know that. But that's also the reason why it's still not ready yet. MIDI doesn't work unless it's easy to implement, universal and backwards compatible and used by everyone... so it has taken decades to come up with an extension. And the improvements aren't really amazing as such.. more resolution, more channels, more bandwidth... but it's all the same old same old :) So ultimately we need innovation from the device makers and ensure that interoperability that made MIDI so good stays untouched. And that's not given :)
@@jjrusy7438 I'm an electronics engineer, and MIDI hardware layer is absolutely well thought out and doesn't need "gigahertz" speeds... the main reason for the current loop was noise immunity and simplicity. the current loop allows you to have cheap cables and connectors and very high interference immunity while still providing long cable runs AND galvanic isolation with optocouplers. These are essential aspects of MIDI being reliable and fool proof on the road and in the studio. for example, USB is one of the worst things that ever happened to MIDI since it gave away galvanic isolation, made the hardware and software implementation way more complicated, isn't as immune to noise, doesn't allow as long of cable runs than original specification etc... All it gives you is apparent convenience, but event that isn't guaranteed since it often requires drivers and if the cable for what ever reason disconnects, in many cases you need to restart your software to restore the connection instead of just plugging it back in. So no, midi doesn't need gigahertz speeds, it need to be reliable, highly versatile, cheap and fool proof. Just increase of baudrate to 10x the current one would be over the real requirement. For those who need it all, we have OSC... MIDI doesn't need to be OSC.
This actually makes me think of another topic for a TATA - loop switchers (and some of them are also midi controllers) and how to use them effectively. More specifically - how to use them effectively with a pedal (or amp) that has an effects loop. My assumption is - have one loop connected to the input and the effects send, have a second loop connected to the effects return and the output of the pedal. Add other pedals to other loops. Use the switcher to determine the order of the pedals (and which ones are in the loop). If you want to use the pedal with the effects loop both loops need to be switched on. Am I close? 😅
Damnit you're easily the best guitar channel out there, really feeding my inner geek. Thanks for breaking this one down, got a midi controller en route now.
Great video as always! Even though I know at least the basics of almost every topic you cover in this series, I still always watch them and learn new things. Keep up the awesome work!
Thanks. As a beginner, the used cheap amp I had just quit, and this was helpful when researching amp capabilities/plug ins for future use or expansion, assuming I make it that far!
Using modelers live doesn't always require you to take your hands off the guitar. They maybe full floor modelers, the Headrush pedalboard, or the compact version the mx-5 immediately come to mind.
Once again another great explanation which in this case came in a very good time cuz I was just going to do my research and learn a thing or two about midi. Thanks a lot man, grretings from Brazi!. o/
I must say that acronim TATA on Serbian means father.. So when you say "I'm nailing your tatas" sounds very wrong when you understand both languages :D
I'll just point out that MIDI can also control stage lighting. There are dedicated light controllers from several different companies that can be controlled with MIDI to cycle stage lights when MIDI commands are sent to the lighting controller.
Sweet man! I was actually thinking about investing in a midi controller the other day. I already know how they work, but I'd love to hear your opinion on the bigger and more advanced ones. Would you be able to do reviews on the more advanced ones??
So this idea of midi switcher is like a multi effects pedal which may provide realistic sound of an amp or dirty channel depending on the cost of the Multifx While Switch is a controller of a real amp just using your foot.
Thanks for the video and product review. I have a couple budget midi foot controllers, and was unsure about the meloaudio one which I had seen online. I setup my pedal board to control the channel switching on my mesa boogie at the same time as switching pedals, including presets on my Line6 M9 and M5. It works great, but the devices I have have quirks and limitations. I may try the meloaudio one at some point. Thanks.
Hey Colilin! (spelling?) Thanks so much for doing this video! I was recommended the midi commander, but I'm kinda old and afraid of technology, so I've never hooked it up. I bought it last year lol! I bought it to hook it up to my 11 rack so that I could either use that instead of my 60 pound combo amp at shows whenever there are any, or maybe to make commands in Reaper. Thanks to you doing this video I'm about to at last try it out and see what it does. If you have any tips for someone like me for these applications, please let me know. I love your videos, thanks a lot!!!
I use fcb1010 for 10 years. Its good enough. but as simple as they are, they are very expensive because of lack of popularity. Was thinking of getting one as you showed, but it is two buttons less than fcb1010, for me its crucial.
Can the Line 6 FBV 3 also be used as a MIDI controller switch like this? If not I will buy this. Setup concept is this... laptop will be used as a effects/loop/amp modeler > connect a MIDI controller to the laptop to control settings. Guitar inputs to a DAC. Laptop connects to a DAC that outputs to a speaker... and now I'm ready with 100s of presets to change the sound of my guitar. Would that work? What MIDI foot switch should I go with? Software used will be Helix Native and DAW is Cubebase elements. My DAC (mixer) is a Yamaha AG03.
Thanks for this video. I have this same foot controller. I have it connected to my Windows 10 laptop. A couple of questions: 1) Is it possible to start and stop backing tracks in Abelton Live using the footswitches on this unit? 2) Is it possible to send MIDI note data with this footswitch, so I can trigger keyboard notes from a synth VST with the footswitches on this unit?
I have this exact pedal the only thing I have no idea how to do is make it change individual things like only turning on the high gain setting, noise gate or the sound setting
I'm a Pro Tools user, I wouldn't have a clue how to use Logic. There are lots of videos on UA-cam regarding this product though, I'm sure a few of them will feature people who are using it with Logic.
CSGuitars thanks for the reply. How about a video about how to use the empty banks that are set up for axfx or Kemper etc. I only ask cause the manual is horrible and there really aren’t any vids on how to use the think in general.
Hi, could i change the channels on a Mesa Boogie Dual or Triple Rectifier using Midi commands throught the midi footswitch input on the back of the amp? Thanks
Thnx for the much needed info! I really learned alot! A new TATA; how do analog pedals work? I always wondered how an analog delay works for example or an analog overdrive without tube
Thanks for the vid. Very imformative. Nice to have something about MIDI for us string puckers; the keyboard guys make it look like rocket science. I;m curious what Amp modeling software you are using?
I have a EVH stealth which is midi capable and various analog pedals. Here is my question: can I set up a midi controller that can switch my amps channels while simultaneously switch certain pedals on and off? I’m tired of tap dancing to get my clean, rhythm and lead tones! I want one click for each, is that asking too much?
I wish the Midi commander had an input for 9 volt power supply, everything else on my pedalboard is plugged into my isolated power supply, I don't want to have to use another plug socket for this
Well Hallelujah!!! After watching a shit ton of videos on the midi commander, you finally answered THE ONE QUESTION i had....all within the first 5 minutes! Awsome. Im ordering this right now. Thanks! Ps.... is it easy to make the top 4 buttons to switch presets,just like the bottom four? In other words,im just looking for preset changes on all 8 buttons...thanks!
MIDI is a powerful tool, allowing us to control complex hardware and software easily, but what is it?
We take a look at a MIDI controller footswitch to see how MIDI can be utilised for guitars in this Too Afraid To Ask video.
Meloaudio MIDI Commander:
meloaudio.com
meloaudio.com/products/meloaudio-midi-commander-guitar-floor-multi-effects-portable-usb-midi-foot-controller-foot-switches
Leave your own TATAs in the comments section and perhaps they'll become the topic of a future video.
More from CSGuitars:
Gain access to exclusive content at: www.patreon.com/csguitars
Buy CSGuitars Merchandise:
www.csguitars.co.uk/store
Website:
www.csguitars.co.uk
Contact:
colin@csguitars.co.uk
CSGuitars what amp sim do you use? I used amplitube 4 whitout an interface and it worked great hadn’t a lot of latency but now something glitches whit it and there is like 3 seconds of latency now. So I’m looking for an alternative also because I didn’t really like its interface!
dONTE KNOW IF YOU HAVER EVER BUILT THIS SETUP BUTT....
Actually if an MPE midI pickup is applied to a guitar, the guitar notes can activate effects... Literally 1 set of effects per note! Then if you applies the newish Perfect tuning systems like Evertune (ie. removing detune bends) the bends can also activate effects (also activating auto bending and detuneing yah crazy butt were controlling with midi)!
aLSO TO NOTE:THE GUITAR would effectively have the capacity to in time with the guitar score control a keyboards synth plus...... drumroll any other equipment via midi aka the Midi tech plays lead guitar...
Plus we could finally get to full use of Guitar voltages as synth input!
foot switches are out of date it's time the guitar player controls midi with the strings! but... add foot swtiches back in an yaggg!
@@marcolondon1005 last night I FARTED!
i still love the fact that MIDI is basically in v1.0 since it came out
If it works, don't fix it
As opposed to USB that still kinda sucks and we're on what is essentially version 6 since 1996.
Kylie McInnes there’s a reason why my boss refers to it as Universal Security Breach 😂
ccandrew111 lmaoo
First time perfect :p
dude, this is actually incredibly helpful. I have a Randall with a midi foot switch, but I have had no idea how to use. It has literally been sitting there since I bought the amp. Like you, my amp has way too many tone options, and it is impractical to use while playing. Now I know how to use that midi switch to get the different tones I have dialed in. Love the TATAs!
Oooohh digital technologies ? Now we're getting into my territory ! Love how midi is a basic format and how it can do pretty much everything
it can do everything as long as you don't necessarily care about how it does it -- the availability of only 128 values for CCs/etc is a rather frustrating limitation that severely diminishes the value of MIDI for certain applications =/
"Meddy"
"Dedgitul"
Meddy Waters
Theck peck
"sound of shattering glas in my head"... Thank you, now i can´t unhear it anymore
Thats how you change your toooon
I’m relatively new to playing guitar and I’m drawn to your channel more and more. You do a fantastic job of clearly explaining guitar tech. Thanks so much Colin for the content you post!
You forgot the best use, using MIDI with a backing click to change your amp live without ever having to touch a pedal board. That's what I use MIDI for so I don't have to pedal dance and play and sing.
And Periphery!
That is a very good way of doing it! And you must really trust your drummer to never go off the click lol
@@ebheron hasn't happened yet!
According to my research, this can also be used to control lighting effects as well, which actually would be the main reason I would play to a click, so that I can perfectly synced with a pre-programmed light show.
@@reaganharder1480 We do that as well. The only downside, the only device that converts MIDI is a DecaBox. Expensive and high learning curve. But if you are running a laptop at the same time you can avoid it.
Knowledge is power! My request for a TATA: What is open tuning? Thanks.
I think i subbed over a year ago. But this series of videos has been the most helpful thing i have ever found on the internet to expand my recording and understanding of equipment, I've been trying to find and learn this type information. But it feels like everywhere I go I'm digging through blog posts, digging through forums, or I'm digging through manuals to try to figure out what these things mean/do. There's no simple tutorials with these visuals etc. This literally opens up the whole world for me, to get the equipment that I actually want, and get the equipment that I actually need, to make the music I want to make. I know that's long-winded but I really want to say thank you I can't tell you how much this series has helped me already and how much it will help me in the future once i start uploading a lot more my music, I'll probably tagged you in some stuff or send my appreciation via the descriptions. This honestly is going to change my career when it comes to making/performing music. Thank you. Thank you. Thank you. Thank you.
When I need to know something I come to this channel! Thanks dude
It’s true I ignored midi and only knew the connectors were midi. That’s where my midi world started and ended lol
The single most informative summary of MiDi I've ever heard. I may revive my 1980 zoom 4040 and invest in a midi cable as a result. It will feel like something new to me. Exciting. Thanks Colin!
The Voodoo Lab Control Switcher can turn any amp channel switching into a midi signal. This works great for those of us still using traditional non-digitized/midi amps.
Nice commercial. I'm not being funny. I always watch your videos because you give me the most learn for my click by doing all the research I would have done. Cheers! Will DEF add to my pedal board.
You’re cracking me up, dude. So true about guitarists and our preferred tech! Just inherited a MIDI controller and no clue how to use it. Your vid helps. Cheers!
OMG now it makes sense :) I've heard other people talking about how they use MIDI FX pedals but I always thought it was like a multi FX pedal like a zoom GFX8. Thanks :)
I love this series. Very helpful in filling in gaps. Thanks
Great video. I really believe that MIDI and modeling amps are the best way forward for us musicians. I'm a bass player and just bought one of fenders bass amps with a modeler and the thing is incredible I can dial in the exact tone in my head and run a USB line out to my laptop. Using one bass and baritone guitar I've tracked for metal, rock, hip hop and country sounds.
I will be looking to upgrade further when I get a new laptop.
This is a perfectly timed video. I’m looking at getting the Boss DD-200 and ES-8 and really want to switch delay/tone presets with MIDI
I have an ES-8. The interface is shit and annoying because you constantly have to click through a million menus, but it can do EVERYTHING and will never fail you once you figure it out. YMWV, but I had to add an EB Tech Line Level Shifter in the loop to adjust the levels of my main tube amp (Randall RT100) signal which was way too hot. That amp also didn't play nice with the ES-8's latching/momentary channel switching (it would "chirp" when switching high gain channels), so I got a Voodoo Lab Control Switcher which turns channel switching into a midi signal that the ES-8 controls without issue. But, my backup solid state plays nice with the ES-8 out of the box without having to add anything (it doesn't have midi either). On the ES-8, I have every patch send an actual latching channel switch signal as well as a midi channel switch simultaneously so it can work with my main and backup the same. I rewired a footswitch cable from my backup to mirror the channel switching of the Control Switcher, so if my main ever goes down, I just have to swap out 3 of the 4 cable method and plug in the footswitch cable into the ES-8 and I'm back and running without having to change any settings.
WoW. Cool entry into the midi world for guitar. Far more than I ever knew. Thanks
An interesting note on those MIDI jacks/cables with the 5 pin DIN. Old School Soviet era musical equipment also used a 5-pin DIN as their primary jack, and it is very similar but not the same as the 5 pin DIN MIDI jack.
Ahh thanks for the help mate. I’m a bit rusty on my midi
Great topic. and Just to pile on a little more as to just how good of a guitar friend MIDI is...... haha:
A guitar performer can also use a MIDI controller to run a DMX light show, or change patches on your effects units like these cheapo lexicon rack effects I have(same idea as the amp in the vid), or trigger sound effect samples, or play bass/drones/pads with a MIDI foot controller like a 12-step, ALL while playing your guitar.
Another thing you can do with MIDI is program it in advance, such that all you have to do on stage is stay synced with it, and your pre-programmed track will do everything else for you.
Another thing you can do with MIDI is to sound like absolutelly crap...
Hail Colin, Tackler of TATAs!
Little off topic here, but your watch is badass, bro. And you definetly make it worth tpo stay until the absolute end of the video everytime :D
if MIDI is good, why don't we have MIDI 2.0?
wait
Because MIDI is so good... there's little to improve and a lot to screw up for a new standard.
@@Mtaalas MIDI 2.0 is a real developing thing btw
not sure if you are playing heh, but they are working on it. The original MIDI is from the early 80's and they used that monster DIN like original PC keyboards used. They also used a serial-data protocol that was pretty inefficient regarding power waste and it was slow. 220ohm current sink resistors holy crap what a waste. Today it could be gigaherz through a 1megohm circuit that was lightning fast and uses basically no juice. the data packet size could be increased 100x if needed. so IMO this 30 year old convention definitely needs an upgrade
@@certifiedpossum8655 I do know that. But that's also the reason why it's still not ready yet. MIDI doesn't work unless it's easy to implement, universal and backwards compatible and used by everyone... so it has taken decades to come up with an extension.
And the improvements aren't really amazing as such.. more resolution, more channels, more bandwidth... but it's all the same old same old :)
So ultimately we need innovation from the device makers and ensure that interoperability that made MIDI so good stays untouched. And that's not given :)
@@jjrusy7438 I'm an electronics engineer, and MIDI hardware layer is absolutely well thought out and doesn't need "gigahertz" speeds...
the main reason for the current loop was noise immunity and simplicity. the current loop allows you to have cheap cables and connectors and very high interference immunity while still providing long cable runs AND galvanic isolation with optocouplers.
These are essential aspects of MIDI being reliable and fool proof on the road and in the studio.
for example, USB is one of the worst things that ever happened to MIDI since it gave away galvanic isolation, made the hardware and software implementation way more complicated, isn't as immune to noise, doesn't allow as long of cable runs than original specification etc...
All it gives you is apparent convenience, but event that isn't guaranteed since it often requires drivers and if the cable for what ever reason disconnects, in many cases you need to restart your software to restore the connection instead of just plugging it back in.
So no, midi doesn't need gigahertz speeds, it need to be reliable, highly versatile, cheap and fool proof.
Just increase of baudrate to 10x the current one would be over the real requirement.
For those who need it all, we have OSC... MIDI doesn't need to be OSC.
This actually makes me think of another topic for a TATA - loop switchers (and some of them are also midi controllers) and how to use them effectively. More specifically - how to use them effectively with a pedal (or amp) that has an effects loop.
My assumption is - have one loop connected to the input and the effects send, have a second loop connected to the effects return and the output of the pedal. Add other pedals to other loops. Use the switcher to determine the order of the pedals (and which ones are in the loop). If you want to use the pedal with the effects loop both loops need to be switched on.
Am I close? 😅
Damnit you're easily the best guitar channel out there, really feeding my inner geek. Thanks for breaking this one down, got a midi controller en route now.
Great video as always! Even though I know at least the basics of almost every topic you cover in this series, I still always watch them and learn new things. Keep up the awesome work!
Man. Thank you so much! I had no idea until this video! Thank you so much.
Can you demonstrate how to make the savage changing channels and stomp boxes or presets (channels and stomp boxes at the same time)
Enjoyed your video very much! I’m a beginner and you’ve got me on the verge of actually understanding this. Very well done!
Thanks. As a beginner, the used cheap amp I had just quit, and this was helpful when researching amp capabilities/plug ins for future use or expansion, assuming I make it that far!
MIDI is such an amazing technology in music production. Loved your video man!
Sometimes, I hate my M-Audio KS-49. I feel a little better about it after seeing that you use one, Colin. Great video as always.
Very nice explanation, i finally got it because of this vid!
Ooooh, you mean M1-D1, cheers Colin!
Exactly what I needed to feel less intimidated by MIDI. Thank you amigo ! 👍
Using modelers live doesn't always require you to take your hands off the guitar. They maybe full floor modelers, the Headrush pedalboard, or the compact version the mx-5 immediately come to mind.
Once again another great explanation which in this case came in a very good time cuz I was just going to do my research and learn a thing or two about midi. Thanks a lot man, grretings from Brazi!. o/
I must say that acronim TATA on Serbian means father.. So when you say "I'm nailing your tatas" sounds very wrong when you understand both languages :D
🤣
I'll just point out that MIDI can also control stage lighting. There are dedicated light controllers from several different companies that can be controlled with MIDI to cycle stage lights when MIDI commands are sent to the lighting controller.
Thank you for this video!! Love the 50p video!! Best regards from Chile.
Thank god this came out because I was sure as shit not goona be judged by Google for asking this.
Very helpful to many! Thanks for sharing brother! Be Well!
can hear the Mr Scary influence with that V tune.
I already know about midi, but I thought your narration would be an ace background while I break up this bud and pack it into this bowl.
I had one of these. They work well, but I got rid of mine due to the noisy switches.
Sweet man! I was actually thinking about investing in a midi controller the other day. I already know how they work, but I'd love to hear your opinion on the bigger and more advanced ones. Would you be able to do reviews on the more advanced ones??
I remember my Atari had a MIDI, mid 1980´s. The feature was pushed quite a lot by Atari back then.
So you're actually keeping the Engl ? if yes, you clearly need more dinosaurs, man.
There's a lot of room on top of that one that needs filled up.
This was a fantastic video. Thanks so much.
Switches are awful but no worse than the £300 Midi Maestro
Such a great series!
So this idea of midi switcher is like a multi effects pedal which may provide realistic sound of an amp or dirty channel depending on the cost of the Multifx
While Switch is a controller of a real amp just using your foot.
Thanks man! Good job! I learned something new!
3:18 Does it remember the physical knob positions also?
It does. Of course you won't be able have visual feedback, but knob position most of the time is saved (except for the Master volume)
Been using MIDI since 86...still use it to this day...
Oh man I am digging this framerate.
For the next TATA:
PLEASE explain in and out of phase pickups!
Thanks!
In-phase coils enhance the frequencies that out-of-phase coils cut. It's about the relationship between the coils' output signals.
Thanks for the video and product review. I have a couple budget midi foot controllers, and was unsure about the meloaudio one which I had seen online. I setup my pedal board to control the channel switching on my mesa boogie at the same time as switching pedals, including presets on my Line6 M9 and M5. It works great, but the devices I have have quirks and limitations. I may try the meloaudio one at some point. Thanks.
thank you! i have learned a lot!
i recently connected my midi foot controller fcb1010 to my plugin.it a lot cleaner and efficient than connecting "real" pedals together
Awesome explanation!
Hey Colilin! (spelling?) Thanks so much for doing this video! I was recommended the midi commander, but I'm kinda old and afraid of technology, so I've never hooked it up. I bought it last year lol! I bought it to hook it up to my 11 rack so that I could either use that instead of my 60 pound combo amp at shows whenever there are any, or maybe to make commands in Reaper. Thanks to you doing this video I'm about to at last try it out and see what it does. If you have any tips for someone like me for these applications, please let me know. I love your videos, thanks a lot!!!
I use fcb1010 for 10 years. Its good enough. but as simple as they are, they are very expensive because of lack of popularity. Was thinking of getting one as you showed, but it is two buttons less than fcb1010, for me its crucial.
My experience with MIDI has so far been limited to using the MIDI port on my PC's sound card to plug in joysticks in the 90s
1985 represent! Atari ST + Korg or Roland keyboards ... midi tunes ... man that was a while ago.
Great explanation! More amps need to adopt this really :)
Can the Line 6 FBV 3 also be used as a MIDI controller switch like this? If not I will buy this. Setup concept is this... laptop will be used as a effects/loop/amp modeler > connect a MIDI controller to the laptop to control settings. Guitar inputs to a DAC. Laptop connects to a DAC that outputs to a speaker... and now I'm ready with 100s of presets to change the sound of my guitar. Would that work? What MIDI foot switch should I go with? Software used will be Helix Native and DAW is Cubebase elements. My DAC (mixer) is a Yamaha AG03.
Carbon 2 is a great little synth!
Regarding this topic, I would love some information on the kaos pads for guitar
Really great video
Thanks for this video. I have this same foot controller. I have it connected to my Windows 10 laptop. A couple of questions:
1) Is it possible to start and stop backing tracks in Abelton Live using the footswitches on this unit?
2) Is it possible to send MIDI note data with this footswitch, so I can trigger keyboard notes from a synth VST with the footswitches on this unit?
I have this exact pedal the only thing I have no idea how to do is make it change individual things like only turning on the high gain setting, noise gate or the sound setting
Great vidd good sir! Subscribed!
Good luck with the footswitch, got my eyes on a ZOOM BASS multi effecrs pedal......
I greatly appreciate this video. I recently got Peavey's ReValver and have been wondering how to utilize the program with MIDI for live settings.
Thanks. Does this have continuous midi so I can turn up and down a channel in increments by holding down the assigned switch?
Nice tutorial! Can you use it with the katana librarian? That would be awesome
Your videos are the fucking holy grail of information.
Could you post a tuto on setup in Ableton? Thanks.
thanks for this
TATA - What is amp simulation & how and when to use it?
Hi Colin could you please tell me how to program all 8 switches as presets only?
If you feel ambitious, we'd love video on MIDI CC messages vs channels and what omni is, etc.!
Very good video.
This didn’t necessarily sell me on the midi commander but more on an engl amp 😬
What's a power conditioner and how do I know if I need one?
Thank you showing the midi commander. Any chance you could do an instructional vid on how to set it up with Logic?
I'm a Pro Tools user, I wouldn't have a clue how to use Logic.
There are lots of videos on UA-cam regarding this product though, I'm sure a few of them will feature people who are using it with Logic.
CSGuitars thanks for the reply. How about a video about how to use the empty banks that are set up for axfx or Kemper etc. I only ask cause the manual is horrible and there really aren’t any vids on how to use the think in general.
Hi, could i change the channels on a Mesa Boogie Dual or Triple Rectifier using Midi commands throught the midi footswitch input on the back of the amp? Thanks
You can, but better consult your manual to see what MIDI messages or "instructions" your amp expects and program the controller accordingly.
Thnx for the much needed info! I really learned alot! A new TATA; how do analog pedals work? I always wondered how an analog delay works for example or an analog overdrive without tube
Oh boy, are you going to enjoy a video I'm currently working on all about analog delay.
@@ScienceofLoud Can't wait! :D
Thanks for the vid. Very imformative. Nice to have something about MIDI for us string puckers; the keyboard guys make it look like rocket science. I;m curious what Amp modeling software you are using?
I have a EVH stealth which is midi capable and various analog pedals.
Here is my question: can I set up a midi controller that can switch my amps channels while simultaneously switch certain pedals on and off?
I’m tired of tap dancing to get my clean, rhythm and lead tones! I want one click for each, is that asking too much?
I wish the Midi commander had an input for 9 volt power supply, everything else on my pedalboard is plugged into my isolated power supply, I don't want to have to use another plug socket for this
Colin... You have gained a new subscriber for your roasting of Jay Erk on Pedalboards of Doom
Glad to have you on board.
Also, fuck that guy.
Exactly! Fuck that guy! I was the dude who had his evening poo brightened 😂
Well Hallelujah!!! After watching a shit ton of videos on the midi commander, you finally answered THE ONE QUESTION i had....all within the first 5 minutes! Awsome. Im ordering this right now. Thanks!
Ps.... is it easy to make the top 4 buttons to switch presets,just like the bottom four? In other words,im just looking for preset changes on all 8 buttons...thanks!
Hi, any chance you can explain using Cus (custom mode) to map the commander into Ableton. That would be so cool. Thanks.
Does the positive grid spark amp use midi??
And how does the spark work
For playing live with bias fx would I need to bring my laptop to the gig. And will it play through a Marshall stack?
Nice. Here's my related TATA... Is a Multi-Effects System such as the Digitech RP500 also a MIDI device?
Smoke machines and lighting...good fun.
Can I program the Kemper to have the 8 fx slots toggle on/off (set globally) for every profile. Thanks