Senhores, vocês são os verdadeiros mecânicos gerais. Digo isto, porque fiz um curso de mecânica geral no Senai aqui no Brasil, nos anos 70, mais precisamente no período de 1976 a 1979. No curso nos aprendemos a usinar diversos tipos de peças mecânicas, por isso o nome mecânica geral. O curso envolvia, TORNO MECANICO, primeira maquina utilizada para facear e desbastar o furo de centro e dentes da engrenagem inicialmente, PLAINA essa maquina que foi usado para desenhar os dentes da engrenagem no formado correto, acompanhando apenas o traço feito de acordo com o molde colocado em cima da tinta branca, incrível, vocês fizeram uma plaina de FREZA e RETÍFICA, a FERRARIA, vocês moldaram essas engrenagens sob alta temperatura, curioso, sem equipamentos de segurança de trabalho exigida aqui no Brasil. Vocês são verdadeiros profissionais que deveriam ser muito valorizados. Deus os abençoe!!!🙏🙏🙏
Congratulations to this hardworking men, its so incredible seeing them work in such a great process, may their safety be also considered. Blessings gentlemen.
Es ist wirklich beeindruckend, wie mit so wenig Ausrüstung solche Meisterwerke geschaffen werden, oder? Glaubst du, dass solche Videos mehr Wertschätzung für handwerkliche Fähigkeiten wecken können?
Even though they don’t have safety equipment but they’re very professional knowing how to get their job done and I love them working very hard not afraid to get their hands dirty 👍
En este momento viendo este video recuerdo cuando en la Escuela industrial Alvaro Obregon de Monterrey N.L MEXICO APRENDI LOS PRINCIPIOS DE FUNDICION Y DESPUES MAQUINANDO EN EL TORNO DANDOLE LS TERMINACION las piezas y despues en Dibujo industrial como profesional en fabricas de mantenimiento para que las fabricaran hoy tengo 80 anos y recordar es vivir hoy 17 de julip de 2024
I would really like to see how well that gear meshed with the other gear. I was amazed at how much they seem to rely eyeballing everything but It was an amazing thing to watch.
I had the same question. Especially about the cardboard template that was traced to define the profile of the gear teeth. Maybe considering the large size of the teeth, and/or the intended application of this gear, this isn't an issue...? But I also agree overall, that the process of how this gear was cast, etc., is quite interesting!
@@AngelGonzales-c9n Seguramente debido al bajo nivel de vida que los países occidentales imponen a estos pobres seres humanos les pagan bien porque logran llevar a casa lo mínimo necesario para su familia... pero esta forma de trabajar sólo se encuentra aquí y seguro que no. en Europa
@@Claudio10656 Slow your roll commie stuff is cheaper over there
4 місяці тому
@Claudio10656 Western countries demand high quality of living. The thing is that Western countries have evolved away from primitive techniques. If the rest of the world wants to catch up, then they need to evolve.
Оборудование приемлемое, рабочее, они хорошо потрудились, старались. Такую шестерню отлили, обработали (на вид) отлично. Сразу видно что это не первая деталь, поставлена на поток. Молодцы! Уважаю!👍😁
No air pollution there! While the US and a handful of other countries are forced to comply with stringent air quality standards, this is allowed to continue!
Etant enfant, il y avait une fonderie en face de chez nous et j'ai accompagné mon père qui donnait de temps en temps ''un coup de main '' il ne s'agissait pas de pieces aussi grosses ais plus fines dans leur conceptions car prototypes de pièces destinées à l'industrie. Les habits étaient differents , ols etaient en bleu de travail et leurs chaussures en cuir simple . Je ne vois pas de différence autre que culturelle. Ne vous apitoyez pas sur leurs conditions de vie c'est de l'anthropomorphisme occidental . Interrogez vous sur vos idées préconeçues et un rien meprisant et méprisable, soyez plutôt admiratifs de ce que peut realiser l'espèce humaine .
Добрые и мастеровые люди, покажите точность сопряжения вашей детали в паре с другой шестерней. Будет ещё одно подтверждение вашего удивительного мастерства. Вам земной поклон. ❤👴🙏🤝
Wow....I am amazed at the amount of hard work and craftmanship that goes into the mold making, the melting and pouring, then machining it down. I thought it was going to be a boring video, but it turned out to be a very interesting video.
I like the safety sandals they wear and wonder what steel quality they have. Their raw materials are a wild mixture of everything that looks like metal Seems to be India or Pakistan, they have the money for nukes but are too poor for minimum security
A Krupp or Oerlikon factory in 1880 showed a larger industrial culture. A neglected factory, inhumane working conditions, primitive products, workers, who had no idea of personal hygiene or clothing culture. The conditions in the molding shop and the foundry were horrible. Balancing a car tire to the gram, here weights cause outstanding problems. There is no safety in the workplace. The resulting surface of the gear is shaped to the same degree. Since the tread is not balanced for sliding, the transmission in which this wheel is installed works like a heat source, because a third of the transmitted power is lost during sliding. That's enough to make you pull your hair out..
I take it they have no health and safety rules and regulations still, makes me laugh how they all wearing sandals whist pouring that molten metal, sparks burn his feet....lol
C'est sur qu'ils n'ont pas beaucoup de chaussures et vêtements de protection par contre cela nous montre le passage de l'artisanat vers des techniques industrielles et comment travaillaient nos ancêtres
This gear is for Pakistani next King to be born , for his wrist watch 😂 . It takes human sacrifice to make a Rolex Watch gear like this . Safety is in heaven not on earth.
No safety, no sandals, no goggles, no helmet, no gloves, no underwear, no cutlery to eat, and no toilet paper in the toilet bowl, only fingers, they are my heroes.
Top-notch video! The scale and power of these machines are incredible, and you’ve done a great job showcasing their capabilities. Your technical explanations are spot on, making this a must-watch for engineering fans.
Solo resta decir, Felicitaciones Lo que lograste más allá de querer mejorar la estética pintando, es increíble . No puedo imaginar la cantidad de tiempo empleado, mis mejores deseos para futuros proyectos
Aside from the safety aspect, the whole thing is a fundamentally solid job. Very physically demanding, but safe, and with simple technology. Respect for that. The workpieces would not meet any industrial standards, I think some of them are for agricultural machines or simple systems. You would still have to work on that. Precision, homogeneous structure, consistent quality. I am sure that would work in Pakistan too. Good luck and keep it up 😉
such an amazing skills these guys have learnt over time, every single worker from blast furnace to machinist, die cutter and crane operator are fully aware of what to do when to do. Only if these hard working serious guys given some advance tools and safety equipment they can perform even more efficiently. I am pretty sure these guys are not paid very much, this is one reason these highly skilled and hardworking people are fleeing away and immigrating to other countries for better living and better rewards for their skills.
Yeah this kind of machining know how may not be useful when moving to a more advanced, western country, but that kind of a work ethic will get them far *anywhere!*
I wonder why they are turning it clockwise? They have to put the cutting tool in the tool holder upsidedown that way. You can't tell when it needs sharpening as easily.
Все на глазок, а металл для отливки разносортный.Я не специалист, но думаю, что для таких деталей испытывающих большую нагрузку к качеству металла должны быть высокие требования. А так в целом ребята молодцы, на примитивном оборудовании делают такие вещи. Респект!
@@Сергей-щ4ш4о почему примитивном? Токарный станок отлично работает, резцы хорошо заточены, строгальный станок прекрасно себя показал всё исправно "откидной механизм работает" Я тогда вообще работаю на станках оставшихся от Петра Первого Великого 🤣
As condições de trabalho são humilhantes. A fajta de EPI está estampada em todas fases do procedo, além de ser reslizado num ambiente inseguro e totalmente insalubre. Os operários são verdadeiros heróis.
we should all respect what they manage to achieve working with what they have, and especially in those conditions, .. they certainly deserve credit for the work they turn out and none would argue about them earning there wages, they certainly do .. reminds me of my first few years as an apprentice.
Ognuno dei paesi più sviluppati dovrebbe vedere da dove veniamo, una bella lezione per le giovani generazioni per capire i primi passi del progresso, mi inginocchio a questi grandi lavoratori ed auguro a loro tanta salute insieme ad un futuro migliore
For all of you people that are noticing that they're only wearing sandals and commenting chuckling laughing Etc why don't you send them a pair of boots and make them all happy including yourself
The only precision tool I saw was a Vernier caliper. Involute control was all by layout. Pretty good for a bunch of shoeless guys that seem to know what they're doin.
Excellent compilation from the start to the end! I’m wondering how much would the finished gear cost with all this labor intensive work? The workers skill and their dedication is amazing. Is that a shaper machine that they use to shave the tooth? I am amazed how the casting is sound with no cavities. Great job! The engineering is also fantastic. The owner should be mindful to provide safety tools and ppe. Is there no a regulatory body in that country? Anyway, the skill of the workers and the engineering behind all the process is appreciated! Bravo!
Minha nossa !
Segurança " ZERO " .
Mas , merecedores de toda nossa admiração .
Como pode trabalha em um lugar desse sem os traje de segurança adequada pra o ambiente trabalhando de chilelo meu Deus
Α
@@FlorianoaparecidoCidao
Yeah! And much lower cost too! If we got ri of the ancillary B. S. In what WE do in the USA, we could compete in this market too.
Senhores, vocês são os verdadeiros mecânicos gerais. Digo isto, porque fiz um curso de mecânica geral no Senai aqui no Brasil, nos anos 70, mais precisamente no período de 1976 a 1979. No curso nos aprendemos a usinar diversos tipos de peças mecânicas, por isso o nome mecânica geral. O curso envolvia, TORNO MECANICO, primeira maquina utilizada para facear e desbastar o furo de centro e dentes da engrenagem inicialmente, PLAINA essa maquina que foi usado para desenhar os dentes da engrenagem no formado correto, acompanhando apenas o traço feito de acordo com o molde colocado em cima da tinta branca, incrível, vocês fizeram uma plaina de FREZA e RETÍFICA, a FERRARIA, vocês moldaram essas engrenagens sob alta temperatura, curioso, sem equipamentos de segurança de trabalho exigida aqui no Brasil. Vocês são verdadeiros profissionais que deveriam ser muito valorizados. Deus os abençoe!!!🙏🙏🙏
皆様、工場での作業お疲れ様です。鋳造から旋削に、そして、ギアシェーバー加工まで巧みな技術すごいです。また、外パスを使って内径測定もすごいです。
Congratulations to this hardworking men, its so incredible seeing them work in such a great process, may their safety be also considered. Blessings gentlemen.
All that hard work....raw talent, minimalistic equipment, unsafe environment. Still a masterpiece. Great!!! Respect ❤
👍
Es ist wirklich beeindruckend, wie mit so wenig Ausrüstung solche Meisterwerke geschaffen werden, oder? Glaubst du, dass solche Videos mehr Wertschätzung für handwerkliche Fähigkeiten wecken können?
Even though they don’t have safety equipment but they’re very professional knowing how to get their job done and I love them working very hard not afraid to get their hands dirty 👍
En este momento viendo este video recuerdo cuando en la Escuela industrial Alvaro Obregon de Monterrey N.L MEXICO APRENDI LOS PRINCIPIOS DE FUNDICION Y DESPUES MAQUINANDO EN EL TORNO DANDOLE LS TERMINACION las piezas y despues en Dibujo industrial como profesional en fabricas de mantenimiento para que las fabricaran hoy tengo 80 anos y recordar es vivir hoy 17 de julip de 2024
❤❤❤❤❤
I would really like to see how well that gear meshed with the other gear. I was amazed at how much they seem to rely eyeballing everything but It was an amazing thing to watch.
I had the same question. Especially about the cardboard template that was traced to define the profile of the gear teeth. Maybe considering the large size of the teeth, and/or the intended application of this gear, this isn't an issue...? But I also agree overall, that the process of how this gear was cast, etc., is quite interesting!
E la porosità? Salterà tutto l’ingranaggio! 😮
Finden Sie es faszinierend, wie viel Vertrauen in die Erfahrung und das Augenmaß der Arbeiter gesetzt wird, anstatt auf High-Tech-Ausrüstung?
These are seriously brave men working in a foundry with only sandals on their feet.
See him hop when sparks got his toes!
No eye protection!!!
Bueno a mí no me engañan,,,,, son robots de presicion de carne y hueso descalzos 🤨 ojalá y les paguen 💰 bien por su obra de arte
@@AngelGonzales-c9n Seguramente debido al bajo nivel de vida que los países occidentales imponen a estos pobres seres humanos les pagan bien porque logran llevar a casa lo mínimo necesario para su familia... pero esta forma de trabajar sólo se encuentra aquí y seguro que no. en Europa
@@Claudio10656 Slow your roll commie stuff is cheaper over there
@Claudio10656 Western countries demand high quality of living. The thing is that Western countries have evolved away from primitive techniques. If the rest of the world wants to catch up, then they need to evolve.
I loved the huge voltage leak from the travelling crane to earth, super safe that.
Unreal 😂
What are those homosexuals doing ?
❤o pop p@@scotty2746
😢
l@@scotty2746🎉😊🎉
These men are amazing. Almost unbelievable what they able to do with the limited equipment at their disposal.
Оборудование приемлемое, рабочее, они хорошо потрудились, старались. Такую шестерню отлили, обработали (на вид) отлично. Сразу видно что это не первая деталь, поставлена на поток. Молодцы! Уважаю!👍😁
53:30
они заслуживают нашего восхищения.
Digne du début de l industrie , 200 ans avant l époque moderne. Belle ingéniosité
Safety Record: 5 minutes 10 seconds before the last accident.
Seriously though, you guys do amazing work.
That's why their reproductive rates are so high. Replacement biological units are needed constantly due to deaths in the workforce...
Hey... You there.... Get back to work! Work FASTER! As DEVO says.... CRRACK that whip!
Interesting to see how Westerners worked in the 19th century
We never had the safety sandals.
Amazing skill, but the workshop mess and lack of any safety footwear makes it look like something from the 1890's
No air pollution there! While the US and a handful of other countries are forced to comply with stringent air quality standards, this is allowed to continue!
Heroes of the 21st century!👏👏👏👏👏👏👏👏👏👏👏👏👏God Bless Then All 🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿! Real workman ,the only way to get money honestly!👏👏👏👏👏👏👏👏👏👏👏👏
Mis más absolutos respetos,y grandes felicitaciones,de ver como trabajan.y sin proteccion.Dios los bendigas.
It is called Production Engineering. Congratulations for the high standard skills that you display in Production Engineering.
These guys definitely earned their money. No OSHA here. I hope the best for those workers.
Etant enfant, il y avait une fonderie en face de chez nous et j'ai accompagné mon père qui donnait de temps en temps ''un coup de main '' il ne s'agissait pas de pieces aussi grosses ais plus fines dans leur conceptions car prototypes de pièces destinées à l'industrie. Les habits étaient differents , ols etaient en bleu de travail et leurs chaussures en cuir simple . Je ne vois pas de différence autre que culturelle. Ne vous apitoyez pas sur leurs conditions de vie c'est de l'anthropomorphisme occidental . Interrogez vous sur vos idées préconeçues et un rien meprisant et méprisable, soyez plutôt admiratifs de ce que peut realiser l'espèce humaine .
Добрые и мастеровые люди, покажите точность сопряжения вашей детали в паре с другой шестерней. Будет ещё одно подтверждение вашего удивительного мастерства. Вам земной поклон. ❤👴🙏🤝
Дешевый труд всегда самый благородный, ибо они бережливо относятся к кошельку клиента, а вот капиталист обдерёт, как липку
Не удивлюсь, если они металл из пивных банок используют 🤔
I bet they make one heck of a sandcastle when they go to the beach
200 years ago , that was the way we used to to it too in America !
looks extremely accurate & precise from the moon
Un trabajo hipnótico.
hi
Para hacer un solo piñón de estos, hay un trabajo endemoniado, fantástico
بارك الله بعملكم ورزقكم الصحه والقوه..ولاكن انصح لكم ان تضعوا نظارات للوقايه من نسر الحديد لعيونكم ..حفظكم الله تحياتنا ..محمد فاضل كحيل ❤
Real artisans at work. Bravo! 👏👏👏
Wow....I am amazed at the amount of hard work and craftmanship that goes into the mold making, the melting and pouring, then machining it down. I thought it was going to be a boring video, but it turned out to be a very interesting video.
Молодцы! Хорошо поработали! Уважаю!👍👍👍😁
I like the safety sandals they wear and wonder what steel quality they have.
Their raw materials are a wild mixture of everything that looks like metal
Seems to be India or Pakistan, they have the money for nukes but are too poor for minimum security
Yet you can not deny the incredible amount of skill and accuracy they are working with !!
A Krupp or Oerlikon factory in 1880 showed a larger industrial culture. A neglected factory, inhumane working conditions, primitive products, workers, who had no idea of personal hygiene or clothing culture. The conditions in the molding shop and the foundry were horrible. Balancing a car tire to the gram, here weights cause outstanding problems. There is no safety in the workplace. The resulting surface of the gear is shaped to the same degree. Since the tread is not balanced for sliding, the transmission in which this wheel is installed works like a heat source, because a third of the transmitted power is lost during sliding. That's enough to make you pull your hair out..
No
Can't believe they ware sandals ! 😳
Невероятно!!! Парни из стали.
amazing.. but the diregard for worker safty is crazy.. open toe shoes, baggy loose clothing.. no eye protection.. its nuts
The precision of the metals going into the mixture is beyond precise! A perfect allow every time!
🎉🎉🎉❤❤❤ I love teknologi ❤❤❤🎉🎉🎉 fisika ( teknik ilmu fisika)
מדינת עולם שלישי, בית יציקה - פועלים עם סנדלים! ללא כובעי מגן, ללא אוזניות! מדינת עולם שלישי!
These fellas don't need no stinking CNC BS.
Deus abençoe vcs homens valorosos , que tenham muita saúde , um grande abraço
This is very serious. Occasional hazards. No hand gloves, no safety boots, no goggles and helmets.
No Health and Safety Executive!
The hazard is only occasional so nothing to worry about.
I am sure they would take action if it were a permanent condition.
@@johanea Can Your Grandmother suck eggs?
@@davidhorn6008 this is the 3rd world
We will NOT allow YOU do make the risk assessment!
I take it they have no health and safety rules and regulations still, makes me laugh how they all wearing sandals whist pouring that molten metal, sparks burn his feet....lol
C'est sur qu'ils n'ont pas beaucoup de chaussures et vêtements de protection par contre cela nous montre le passage de l'artisanat vers des techniques industrielles et comment travaillaient nos ancêtres
ما شاء الله ❤❤❤ الله اكبر❤❤
3@@UniversalResearchInnovation
You don't get it. They're safety sandals 😅
This gear is for Pakistani next King to be born , for his wrist watch 😂 . It takes human sacrifice to make a Rolex Watch gear like this . Safety is in heaven not on earth.
With enough talent and determination, anything can be repaired. These people are survivors. < Salute! >
Voçes estão de parabéns todos vocês merecem um prêmio prêmio esse que Deus der muita Força a todas e Paz e Bem valeu turma galera são Paulo Brasil
ما شاءالله تبارك الرحمن. ونعم الوكيل. عمل جيد وجبار ومثقن، حياكم الله
No safety, no sandals, no goggles, no helmet, no gloves, no underwear, no cutlery to eat, and no toilet paper in the toilet bowl, only fingers, they are my heroes.
A. I. has determined this part is no longer needed! You are all fired!
Top-notch video! The scale and power of these machines are incredible, and you’ve done a great job showcasing their capabilities. Your technical explanations are spot on, making this a must-watch for engineering fans.
1:14:33
Es increible, en pleno siglo XXI y esta gente trabajando en una fundicion con chanclas de playa. Yo veo este video y mas que admiracion me da pena.
obrigado pela transmiss'ao aqui no youtubem eu aqui em Dublin vendo esse debate, obrigado
What an extrremely hot, dirty, and dangerous place to work/
Thrse people are tough and can make anything!! I admire them
Nice to watch but must be officially and strictly supervised and regulated.
Grande trabalho. Mas, como sempre perigoso. Deus abençoe esses trabalhadores.
Solo resta decir, Felicitaciones
Lo que lograste más allá de querer mejorar la estética pintando, es increíble . No puedo imaginar la cantidad de tiempo empleado, mis mejores deseos para futuros proyectos
Hola, video espectacular, realmente los felicito por realizar este tremendo trabajo de Ingeniería. a puro ñeque ...
고철을 아무거나 막 집어 넣는군. . .
기어의 내구도에 문제가 있을 듯.
그냥 철 덩어리를 선반으로 깎는게 빠르겠는데. .
Воо дают! Всё думал, как же они сделали атомную бомбу? Теперь поверю если скажут, что где-нибудь, на такой же улице.
Люди из говна и палок делают вещи, а у нас из того же делают говнопалку.
Индийцы учились в СССР. Наша школа!
With some scrap metal these men could make gold. Fantastic !
Ho LUTIN , BRAVO LES GARS , VERY GOODJOB ET NIVEAU SÉCURITÉ CA CRAINT quand 😢😢😢😢😢 même
@@serpicon130007
Aside from the safety aspect, the whole thing is a fundamentally solid job. Very physically demanding, but safe, and with simple technology.
Respect for that.
The workpieces would not meet any industrial standards, I think some of them are for agricultural machines or simple systems. You would still have to work on that.
Precision, homogeneous structure, consistent quality. I am sure that would work in Pakistan too.
Good luck and keep it up 😉
يعملون في ظروف صعبة وخطيرة يؤدون عملهم باحترافية وابداعية عالية .. اكيد مقابل اجور زهيدة .. انه شرف العمل من اجل الحياة .. بالتوفيق لهم
Impressive as it may be, the smelting method they're using produces high carbon iron, which is brittle. So that gear may have a pretty short lifespan
Tribute to the hardworking men. Beware that the bosses do not become too rich !!!
حقا تستحق الاحترام والتقدير تحياتي لكم من مصر
Schon faszinierend was man mit einfachen Mitteln machen kann. Was mich interessieren würde, wo man diese Sicherheitssandalen her bekommt. :-)
such an amazing skills these guys have learnt over time, every single worker from blast furnace to machinist, die cutter and crane operator are fully aware of what to do when to do. Only if these hard working serious guys given some advance tools and safety equipment they can perform even more efficiently. I am pretty sure these guys are not paid very much, this is one reason these highly skilled and hardworking people are fleeing away and immigrating to other countries for better living and better rewards for their skills.
Yeah this kind of machining know how may not be useful when moving to a more advanced, western country, but that kind of a work ethic will get them far *anywhere!*
This is a very interesting video. What caught my attention was that the workers were wearing slippers. Safety shoes are required at this site.
I wonder why they are turning it clockwise? They have to put the cutting tool in the tool holder upsidedown that way. You can't tell when it needs sharpening as easily.
يعملون بجد واخلاص
*EXCELENTE AMIGOS: ESTÁN CONTRATADOS,MANO DE OBRA CALIFICADA.*
wielki szacunek panowie dla waszej ciężkiej pracy
Все на глазок, а металл для отливки разносортный.Я не специалист, но думаю, что для таких деталей испытывающих большую нагрузку к качеству металла должны быть высокие требования. А так в целом ребята молодцы, на примитивном оборудовании делают такие вещи. Респект!
@@Сергей-щ4ш4о почему примитивном? Токарный станок отлично работает, резцы хорошо заточены, строгальный станок прекрасно себя показал всё исправно "откидной механизм работает"
Я тогда вообще работаю на станках оставшихся от Петра Первого Великого 🤣
As condições de trabalho são humilhantes. A fajta de EPI está estampada em todas fases do procedo, além de ser reslizado num ambiente inseguro e totalmente insalubre. Os operários são verdadeiros heróis.
멋진 영상 입니다. 응 원보냅니다🎉🎉🎉꾹❤꾹❤😊😊
Extraordinario! Merecem agradecinentos 'equipamentos de seguranca". Deus proteja!
we should all respect what they manage to achieve working with what they have, and especially in those conditions, .. they certainly deserve credit for the work they turn out and none would argue about them earning there wages, they certainly do .. reminds me of my first few years as an apprentice.
I wonder what the prep work with all that sand takes exactly?
What a fine industrios people .
Ognuno dei paesi più sviluppati dovrebbe vedere da dove veniamo, una bella lezione per le giovani generazioni per capire i primi passi del progresso, mi inginocchio a questi grandi lavoratori ed auguro a loro tanta salute insieme ad un futuro migliore
After watching this video! I have an all new respect for anything made in India! I am impressed!!!
Great job well done. Your true artisans .
For all of you people that are noticing that they're only wearing sandals and commenting chuckling laughing Etc why don't you send them a pair of boots and make them all happy including yourself
They would never wear Steel toe boots .They would feel awkward in them. This is how they like to work. To each their own
Yes but it’d be only a drop in the bucket. They need better leaders to help them organize.
Parabéns povo mais inteligentes que eu já vi 👍🇧🇷
good use of steel toe nail flip flops they never took off in england
The fact that they still walking around with both feet intact in incredible😂.
보호구 착용 시급해 보이네요.
Amazing people and great work!! I just wish their bosses would pop for some boots and ppe!!!
"Safety first" is the slogan alltime reminded to workers in this company and that reassures us a lot 🤕!!! Congrats.
Simplement impensable ,Chapeau Messieurs
It's a cog for opening and closing draw bridges.
Highly skilled excellent workers
I was wondering with this utter unsafe conditions, so far how many of their workers many already get handicapped 😮😢
The only precision tool I saw was a Vernier caliper. Involute control was all by layout. Pretty good for a bunch of shoeless guys that seem to know what they're doin.
Like to know what type of material is injected into the sand?
co2 gas
What does the co2 do?
My guess would be that it hardens the clay or whatever the sand material is.
The yellow sand is harder that makes molds
Pakistani fearless amazing skilled workers wearing safety less sandals.
일요일을 격주로 쉬면서 일하신 60년대 우리 아버지 모습
Very well thank you
PRICE OF THIS GEAR ?
Excellent compilation from the start to the end!
I’m wondering how much would the finished gear cost with all this labor intensive work?
The workers skill and their dedication is amazing.
Is that a shaper machine that they use to shave the tooth?
I am amazed how the casting is sound with no cavities. Great job! The engineering is also fantastic.
The owner should be mindful to provide safety tools and ppe.
Is there no a regulatory body in that country?
Anyway, the skill of the workers and the engineering behind all the process is appreciated! Bravo!