Using one PSU for two monoblocks defeats the whole purpose. The idea is having a seperate PSU for each channel. If you run both from the same, you just have a regular stereo amplifier in two cases.
One of your Kickstarter options is (2 x V3) plus (2 x 48V/10A). How would that be used? Is there an advantage to using the 10A PS for one V3 vs using the 5A PS?
@@lehsu I bet you think that was really clever... don't you? No speaker is exacty 2, 4, 6, or 8 ohms. These are median values that reflect the average load they place on an amplifier. Their actual impedance can vary substantially across different frequencies.
@@O90EKQZVP9 For a less picky person the answer was already there. I'm seeing this more and more over time ... people aren't conversing to exchange information or to learn or teach .... Conversation these days has become a competition in which the "winner" gets the las word. As reflected in our friend's overtly picky response. He thought he'd found a gap in my answer and was happy to exploit it rather than understanding the larger message. All this is reminiscent of the "You misplaced a coma, so your entire book is invalid." crap from the 1970s.
What if I have short 18" speaker cables and long IC's to each speaker where the amp needs to be very close to speakers that are 8' apart, will I need to get two 48V/10A PS or is there some kind of extension cables to make the splitter go further?
Hello! The one-to-two setup is suitable for desktop/near-field listening. When it comes to a bigger space like a home theater, one-to-one is recommended, where 2 48V/5A PS units separately drive each V3 MONO. The latter one will suit your needs better. :)
From a technical standpoint every inch of DC cord adds resistance to the amplifier's power supply, which can result in some minor to serious instabilities. If your speakers are 8 feet apart your best bet is to have the amps with the speakers, use two separate power supplies, plugged in near/behind your speakers and longer balanced signal cords.
Bir amfi üreticisi güç kaynağı için en yüksek verimli adaptör kullanması gerekir ürünün içinden çıkan 24v5a yeterli besleme yapamadığı için ben neden adaptör yükseltmek için ekstra para ödemek zorundayım bizim ülkemize gelen 🇹🇷v3 ürünlerde adaptör seçeneğim yok malesef üretici firmadan almak istediğimde ekstra nakliye gümrük masrafları ödemek zorundayım ben v3 modelinin bütün videolarını izledim kullanmak istediğim hoparlörlerim güçlü olduğu için 24v-5a bana yeterli gelmeyeceği kanaatine vardım firma bu ürünü toplam maliyeti üzerine bindirerek sadece 48v-10a şekliyle göndermeli diyorum kimse yeni aldığı ürüne 60-70.$ daha verip neden adaptör alsın.?
If you take the 2x 10amp PS & 2x monos option on KS. Do you get two filters? Or is the filter supplied only w the one 10amp PS w splitter to two monos setup?
So they had to develop a new box to fix the Y connector's problems. How is that decluttering your setup? I have been and will continue to recommend that 2 x V3M + 2 x 36V5A supplies is your best setup for stability, temperature and longevity. The two smaller supplies take up no more space than the big one with the filter.
I connected fosi audio v3 mono on my marantz 5.1 av receiver through front pre out. During the audyssy speaker calibration my av receiver detected that my front speaker connection is phase in correct. But i connected them properly. After i connected my speakers revised ( polarity inverted) then my av receiver detected that speakers phase is correct.
This happens a lot with external amplifiers ... either the speaker position puts it out of phase or the wiring does (as you discovered). You chose the correct path of simply flipping the speaker wires.
Have Faith! I too received my 10A Powertsupply with 2 V3 a few days ago. Fosi delivers, and the 10A PA is absolutely awesome with the neat Power Filter which is also black btw.
I would love to know more about this DC filter that was showed in the video. I would order them right away. Can you please tell me more about them? Have a nice day
Good day! This filter helps to eliminate noise that might appear in a one-to-two setup. If you are one of our backers on Kickstarter who opted for the 48V/10A PSU+V3 MONO, you will get a filter for free.😁
Using one PSU for two monoblocks defeats the whole purpose. The idea is having a seperate PSU for each channel. If you run both from the same, you just have a regular stereo amplifier in two cases.
You can choose the separate power supply if it makes you feel better.
One of your Kickstarter options is (2 x V3) plus (2 x 48V/10A). How would that be used? Is there an advantage to using the 10A PS for one V3 vs using the 5A PS?
If your speakers get under 4 ohms yes ... for 6 or 8 ohm speakers, no.
@@Douglas_Blake_579what about exactly 4 ohm speakers?
@@lehsu
I bet you think that was really clever... don't you?
No speaker is exacty 2, 4, 6, or 8 ohms. These are median values that reflect the average load they place on an amplifier. Their actual impedance can vary substantially across different frequencies.
@@Douglas_Blake_579 not sure why you took that so personally i dont think they meant offense just asking a question
@@O90EKQZVP9
For a less picky person the answer was already there.
I'm seeing this more and more over time ... people aren't conversing to exchange information or to learn or teach .... Conversation these days has become a competition in which the "winner" gets the las word. As reflected in our friend's overtly picky response. He thought he'd found a gap in my answer and was happy to exploit it rather than understanding the larger message.
All this is reminiscent of the "You misplaced a coma, so your entire book is invalid." crap from the 1970s.
What if I have short 18" speaker cables and long IC's to each speaker where the amp needs to be very close to speakers that are 8' apart, will I need to get two 48V/10A PS or is there some kind of extension cables to make the splitter go further?
Hello! The one-to-two setup is suitable for desktop/near-field listening. When it comes to a bigger space like a home theater, one-to-one is recommended, where 2 48V/5A PS units separately drive each V3 MONO. The latter one will suit your needs better. :)
From a technical standpoint every inch of DC cord adds resistance to the amplifier's power supply, which can result in some minor to serious instabilities. If your speakers are 8 feet apart your best bet is to have the amps with the speakers, use two separate power supplies, plugged in near/behind your speakers and longer balanced signal cords.
Thank you for listening to your customers again. Great work Fosi.
Bir amfi üreticisi güç kaynağı için en yüksek verimli adaptör kullanması gerekir ürünün içinden çıkan 24v5a yeterli besleme yapamadığı için ben neden adaptör yükseltmek için ekstra para ödemek zorundayım bizim ülkemize gelen 🇹🇷v3 ürünlerde adaptör seçeneğim yok malesef üretici firmadan almak istediğimde ekstra nakliye gümrük masrafları ödemek zorundayım ben v3 modelinin bütün videolarını izledim kullanmak istediğim hoparlörlerim güçlü olduğu için 24v-5a bana yeterli gelmeyeceği kanaatine vardım firma bu ürünü toplam maliyeti üzerine bindirerek sadece 48v-10a şekliyle göndermeli diyorum kimse yeni aldığı ürüne 60-70.$ daha verip neden adaptör alsın.?
I'm hearing these v3 Mono's aren't recommended for High Level Subwoofer connections.. Is this true?
I am using v3 stereo with 2 class ab active subwoofers 10" with high level inputs, it works fine for me, I don't like RCA subwoofer
If you take the 2x 10amp PS & 2x monos option on KS. Do you get two filters?
Or is the filter supplied only w the one 10amp PS w splitter to two monos setup?
Only those who pledged for one-to-two (one 48V/10A PSU+two V3 MONOs) setup will be presented with the filter.😉
Fair enough! 😃
@@fosiaudio I think you meant to say: (one 48V/10A PSU+two V3 MONOs)
@@StSam Yes, thanks for correcting!
So they had to develop a new box to fix the Y connector's problems. How is that decluttering your setup?
I have been and will continue to recommend that 2 x V3M + 2 x 36V5A supplies is your best setup for stability, temperature and longevity.
The two smaller supplies take up no more space than the big one with the filter.
I connected fosi audio v3 mono on my marantz 5.1 av receiver through front pre out. During the audyssy speaker calibration my av receiver detected that my front speaker connection is phase in correct. But i connected them properly. After i connected my speakers revised ( polarity inverted) then my av receiver detected that speakers phase is correct.
This happens a lot with external amplifiers ... either the speaker position puts it out of phase or the wiring does (as you discovered). You chose the correct path of simply flipping the speaker wires.
thx providing this information. is the filter a separate box or is it inside of the power supply?
It's separate.
Hi, Fosi, these were supposed to start shipping 15JUN, but I haven't seen any updates about that.
Have Faith! I too received my 10A Powertsupply with 2 V3 a few days ago. Fosi delivers, and the 10A PA is absolutely awesome with the neat Power Filter which is also black btw.
@@onuponedown Ha I got mine a while back yeah
The mismatch between the female hands and AI male voice is unsettling.
Absolutely!
Will the 5Amp supplies come with a filter too or is it just the 10A??
Only the backers who pledged for one 48/10A PSU with two V3 MONOs will receive one for free.
If you have a 5A power supply per mono, you don't need the filter; it's just a fix for two amps sharing a power supply.
Who is using two mono amps on a desktop with such small speakers?
It's just for the demonstration.
In real life ... for desktop setups, this would be way too much power.
Okay okay okay...can you just send em now ...im sooo ready ...😊😊
Okay, okay. Our colleagues have been making preparations for all of your parcels.🤣🥰
I would love to know more about this DC filter that was showed in the video.
I would order them right away.
Can you please tell me more about them?
Have a nice day
Good day! This filter helps to eliminate noise that might appear in a one-to-two setup. If you are one of our backers on Kickstarter who opted for the 48V/10A PSU+V3 MONO, you will get a filter for free.😁
👌👍