Axiom CNC Training Tech Tips (How to run a file on the RichAuto controller)
Вставка
- Опубліковано 2 лис 2020
- Axiom CNC Training Tech Tips (How to run a file on the RichAuto controller)
In this short Tech Tips video we will be covering how to setup and run a file on your Axiom CNC machine. Homing, setting origins, spindle RPM and selecting your file will all be covered in this short video. We will also be providing you with some helpful Tech Tips along the way to improve your CNC experience. Tech Tips listed below...
Tech Tips:
01:00 Setting multiple origins; save your X&Y zero twice this way you alway have a back up.
01:24 Installing a collet into the collet nut; be sure your collets snap into the collet nut before installing them into the spindle.
Learn more: www.axiomprecision.com - Наука та технологія
Is it possible to run Gcode generated on Fusion 360 on the Axiom machine? if so, what post processor do I use to get the .mmg files? Thanks
Hi if my bit cut why on working process how should i do
when we selected the u disk file the set work paarameters page doesnt show up, is there any way to fix this ?
Hi!
Can I change fall speed from 0.200 to 0.500 or...?
Hi, great video,
Is it necessary to turn off machine when changing bit?
How do I set the Richauto controller to start cutting only when the desired number of RPM is reached?
Thank you, it is not necessary to shut the machine down to change your tooling. Your RichAuto controller will have a 3 to 4 second setting that will let the spindle come up to operating RPM before the file starts.
How do you change the speed scale during program execution?
To change the speed scale during a file operation you will us the Y+ and Y- buttons to increase or decrease by 10%. Here is a link to the Tech Tip video for speed scale. We hope this information was helpful. ua-cam.com/video/9QNnXpHpn5s/v-deo.html
hello. I want to get my z 0 but the sensor does not detect it. I have to stopped it using the richauto controller. What can be? Thank you
If you a referring to the blue puck not sensing the contact with the bit...this can be caused by a poor connection or bad wire in the puck cable, or a loose connection in the backside of the female plug.
It would be recommended to check that wire, it can be replaced very easily as it simply attaches to the bottom of the puck with a screw. Generally, when suspected as having a poor connection...we cut this wire back approx. 2 inches and then reattach.
If you need further assistance, please give our support team a call.
Thank you,
Hi, thanks for the video question. I think I messed up pushing too many buttons. My y seems to be out. I have an iconic eight can you tell me how to put it back to factory settings please thank you in advance❤🇨🇦
If you need to reset your controller back to factory settings please email our support team.
support@axiomtoolgroup.com they should be able to supply you with the necessary files to reset your controller.
which rich auto dsp is that in the video?
The controller shown in this video is the RichAuto B18 series controller.
How do you display the entire file name in controller. It cuts off after a few letters.
There might be a character limit on the display. Shorten the name of need be.
I am getting a error unknown file when selecting a file. What be wrong?
Be sure you are saving your files in the correct formate. If exporting them from the Vectric software remember to use the Axiom post processor saving them as a .mmg file.
How to edit your jog speed???
To switch between the fast and slow jogging speeds, press the fast/slow button on the controller to toggle between them. Here is a link to the Tech Tip video that covers this. We hope this information was helpful.
ua-cam.com/video/bpvkf_JCXqg/v-deo.html
How much is this price????
Please visit our website (axiomprecision .com) for full pricing and availability. We hope this information was helpful.