Screen Printing on Sweatshirts with Comet White Water Base vs Meteor White Plastisol Ink

Поділитися
Вставка
  • Опубліковано 4 чер 2014
  • Screen printing on sweatshirts can be tough, this video shows how to print sweats with easy. To print this we used these products.
    Comet White Water Base: www.screenprinting.com
    Meteor White Plastisol: www.screenprinting.com
    Solid Loc Screens: www.screenprinting.com/solid-l...
    Let us know what you think by sharing on our FaceBook / ryonet
    Check out our Twitter / ryonet

КОМЕНТАРІ • 22

  • @MrBIGHAITIAN
    @MrBIGHAITIAN 9 років тому +1

    Great great video can't wait to get my new press you guys should be shipping it out soon

  • @ballerpro03
    @ballerpro03 4 роки тому +1

    Question: how much detail can a 130 mesh screen hold? If I wanted to do more detail should I get yellow mesh or white. Does it matter

  • @mahijangid7342
    @mahijangid7342 4 роки тому

    How can we print logo on Collar T shirt. Pls share vedio for that. And How we can Print Soft hand texture in Plastisol ink with Heat press.

  • @tluangaazl8920
    @tluangaazl8920 4 роки тому

    what causes migration ? it usually happen on hoodie and sweat shirt..

  • @WanderingMarissa
    @WanderingMarissa 8 років тому +1

    If you're printing wet on wet with water-based ink on a hoodie, would you use a low cure additive, or would that just be if you are flashing in between? Hoodies are 60% combed and ring-spun cotton 40% poly fleece.

    • @Ryonet
      @Ryonet  8 років тому

      +Marissa Mason Are you printing on dark or light colored garments?

    • @WanderingMarissa
      @WanderingMarissa 8 років тому

      Both, but the majority are dark.

  • @GMCustomEmbroideryVillaPark
    @GMCustomEmbroideryVillaPark 5 років тому +1

    Hello there what kind of screen are you using and do you have a link where i can buy it?

    • @Ryonet
      @Ryonet  5 років тому

      Hey there! It's a static screen that you can purchase from screenprinting.com

  • @ballerpro03
    @ballerpro03 4 роки тому

    Yeah my ink isn't clearing and I raised my off contact. Is there a adhesive I could use besides web spray?

    • @Ryonet
      @Ryonet  4 роки тому +1

      What mesh count are you using? Is your ink warm/above 80° when you're printing?

    • @ballerpro03
      @ballerpro03 4 роки тому

      Ryonet yes it was at least 75 degrees , i raised the off contact to like 5/8 and sprayed the screen with water and wiped it before I started printing and it came out

  • @alexsaed2441
    @alexsaed2441 9 років тому

    but why is your printing not clear? or is the font made like that

    • @Ryonet
      @Ryonet  9 років тому

      Alex Saed it was designed to be that way. =)

  • @shanepanton2513
    @shanepanton2513 10 років тому

    Which last longer after washing a few times

    • @Ryonet
      @Ryonet  10 років тому

      It pretty comparable, but I'd say probably the plastisol.

    • @shanepanton2513
      @shanepanton2513 10 років тому

      Cheers thx mate.

  • @drjpi
    @drjpi 9 років тому

    which riley is that

    • @Ryonet
      @Ryonet  9 років тому

      GM BROTHERS riley JR 4x2

  • @vintagemxer9165
    @vintagemxer9165 4 роки тому

    DO NOT use Comet white on 50/50 sweats as most are.

  • @MrBIGHAITIAN
    @MrBIGHAITIAN 9 років тому +1

    Great great video can't wait to get my new press you guys should be shipping it out soon

    • @Ryonet
      @Ryonet  9 років тому

      FRITZ PRINTER thanks for the comment!