How to fix Logitech X50 Bluetooth speaker CRACKING SOUND

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • buy me a drink? - paypal.me/jade...
    This is a video tutorial on how to fix Logitech X50 Bluetooth speaker CRACKING SOUND
    RESPECT and SHARE Thank you!
    SUBSCRIBE and like for more videos!
    Ocean by KV / kvmusicprod
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/2OCvpHU
    Music promoted by Audio Library • Video
    IG: / jad6d
    Twitter : / jad6d
    FB: / jadednirac

КОМЕНТАРІ • 103

  • @Premnicholussamson
    @Premnicholussamson 2 роки тому +5

    To fix that diaphragm i just used a Electrical insulation tape..and it worked fine. Did the job 👍🏻

    • @Jad6d
      @Jad6d  2 роки тому +1

      that works too

    • @danielgallo7343
      @danielgallo7343 2 роки тому

      Al menos deja de sonar horrible..gracias por la solución

  • @someguy5719
    @someguy5719 2 роки тому +4

    I repaired mine using surgical tape, i think it's much better than using plastic tape. Your video was very helpfull for the repair, thank you🤝👋

  • @aljonacacio8279
    @aljonacacio8279 3 роки тому +12

    My jbl go has the same problem, it also has some cracks that causes static sound. What I do is I put a very small amount of super glue using needle on each cracks. I let it dry for about a couple of minutes. Fortunately, it works. My speaker now works perfectly well again. This technique might works on small to medium size spaker with mild to moderate damage.

  • @vilgregorioorada3022
    @vilgregorioorada3022 3 роки тому +4

    i never expect na masasayang ang oras ko manood nito that transparent tape na nilagay bibitaw din yan... 'Rugby' lang katapat nyan

  • @hitanshuroy8443
    @hitanshuroy8443 2 роки тому +3

    Hi I just repaired my Logitech X50 & it works absolutely fantastic, thank you so much. Love 😍

  • @SMITESHSURESH
    @SMITESHSURESH 2 роки тому +2

    I was just trying to find how to open the speaker to try and fix it, but this! This is exactly what I needed 🤯Thank you so much!!!

  • @XxvakerxX
    @XxvakerxX 4 місяці тому +1

    En la mía no se notaba algún daño pero seguí con los pasos con cinta de aislar eléctrica y quedó excelente
    Muchas gracias!

  • @baminorchez683
    @baminorchez683 10 місяців тому

    Thank you so much.....haven't been using due to cracking sound for almost a year and almost threw it out.... Now its fine as new....

  • @faresbahareth2723
    @faresbahareth2723 3 роки тому +3

    Thanks, it's really fix my problem with my JBL Pulse speakers

    • @Jad6d
      @Jad6d  3 роки тому

      good to know, please like and sub, thanks

  • @ashishsharma582
    @ashishsharma582 3 роки тому +1

    thanku bhai meri problem solve ho gyi sirf apki wajh se 😘

  • @komphatak3395
    @komphatak3395 4 місяці тому +1

    Exactly the same problem. Thanks mate.

  • @adityaprakash1148
    @adityaprakash1148 Рік тому

    A very thank you fOR MAKING THIS VIDEO , You Extend the life of my X5O life.

  • @jimvenmortel6934
    @jimvenmortel6934 Рік тому +1

    Thank you so much Finally I fix my speaker same as you .

  • @adah17
    @adah17 3 роки тому +7

    Thank you for this video I was able to fix my Logitech X50.

    • @Jad6d
      @Jad6d  3 роки тому +1

      welcome, a like and subs would be appreciated, and an update by now i used " stickglue " not scotch tape

    • @shafanisa3608
      @shafanisa3608 3 роки тому

      @@Jad6d what if i use silicone rubber sealant? is it okay?

    • @kingyt6121
      @kingyt6121 2 роки тому

      @@shafanisa3608 yes

  • @mayuraggarwal1925
    @mayuraggarwal1925 2 роки тому

    My Logitech X50 has same problem and resolved like you and sound is very perfect. Thank you so much... :)

  • @nikhilganesh1438
    @nikhilganesh1438 2 роки тому

    Thank You So Much bro, it works with my JBL Go speaker, keep it up!

  • @vimal9319
    @vimal9319 3 роки тому +6

    best is to use a rubber-based adhesive

    • @MasakyoRenSai
      @MasakyoRenSai Рік тому

      Any recommendations for products easily found in the Indian market?

  • @rittoroy6582
    @rittoroy6582 3 роки тому +3

    Thank you so much... solved my issue

  • @turkurma1379
    @turkurma1379 2 роки тому

    Thankyouuu broo!! it works✨ Im glad that my speaker is usefull again and save my money💓

  • @TrackerScout
    @TrackerScout 3 роки тому

    Fix may be power strip:
    Logitec speakers seem to do it, usually to surround sound speakers. But for me after trying everything and even though did it when was unplugged from pc. The problem I discovered a week later was that my power strip was too close to the subwoofer box (all speakers plug into the subwoofer). It took awhile to discover because for years I had the same setup for my pc, power strip and subwoofer on the floor and never had a problem, only recently started doing it. But am glad I finally figured it out.

  • @prasanna250
    @prasanna250 3 роки тому +2

    Sorry don't try feviquick. And tape also. There is so vibration in sound so there's 2 things not working u have to change speaker

  • @emmanoeljunior5581
    @emmanoeljunior5581 3 роки тому +2

    Thanks, it helped a lot!

    • @Jad6d
      @Jad6d  3 роки тому

      im glad, please subscribe

  • @juandanielcarpio6960
    @juandanielcarpio6960 3 роки тому +3

    Gracias bro! Problema solucionado

  • @TheGuscolombia
    @TheGuscolombia Рік тому +1

    Una mejor forma es usar pegamento de zapatos, yo lo use y feliz porque la cinta con el tiempo falla la goma, use pega de zapatos porque adquiere la forma de la suspensión de caucho rota y la reemplaza obteniendo el sonido lo más original posible, saludos

  • @adityathakur5001
    @adityathakur5001 3 роки тому

    Thanks bro. God bless you

  • @lilianbojorquez3274
    @lilianbojorquez3274 Рік тому

    THANKS!

  • @marlonbraydonvelasquez9706
    @marlonbraydonvelasquez9706 2 роки тому

    He vuelto a usar mi bocina gracias a este video 😃

  • @AniketHanumante
    @AniketHanumante 3 роки тому +1

    Thanks!!

  • @nosdenosde
    @nosdenosde 2 роки тому

    I used flexible adhesive made by scotch and it worked. but the sound is not the same quality.

  • @macranjoh
    @macranjoh 11 місяців тому

    How did you remove the top cover? mine feels stuck :/

  • @ramarathod859
    @ramarathod859 4 роки тому

    Thx dear we need this video

    • @Jad6d
      @Jad6d  4 роки тому

      welcome, sub it will greatly help :)

  • @justmayalittle
    @justmayalittle 4 роки тому +2

    my speaker fell of and now it has that cracking bass... can that be fix by that?

    • @Jad6d
      @Jad6d  4 роки тому

      you have to open it, if the diaphragm is the one broken then it can be fixed

  • @midnightvegeta
    @midnightvegeta 4 роки тому +1

    sakto! thank you!

    • @Jad6d
      @Jad6d  4 роки тому

      welcome, sub it will greatly help :)

  • @ramaraman9256
    @ramaraman9256 2 роки тому

    Thanku bro. 👌

  • @arnavsadhu
    @arnavsadhu Рік тому

    Could u tell what the speaker part number says about it?

  • @lauraromero6965
    @lauraromero6965 10 місяців тому

    Cómo pudieron quitar la top cover!!!

  • @yizhanlove1877
    @yizhanlove1877 Рік тому

    I have a different problem. i dropped my bluetooth about a month ago and now it does not make any sound. I open it but the speaker is not craked. can you please help me. its atendo sound with a lamp.

  • @prateekdey8952
    @prateekdey8952 2 роки тому

    Gasket makers silicon work great for these

  • @snehasingh5655
    @snehasingh5655 Рік тому

    Help me cupkarbar kaise remov Kiya hai

  • @tevesjohndavid5416
    @tevesjohndavid5416 4 роки тому +2

    How did you open the topcap it seems impossible

    • @Jad6d
      @Jad6d  4 роки тому

      just pry it, it is just held on by an adhesive, you can also heat it with a heater to soften the adhesive

    • @tevesjohndavid5416
      @tevesjohndavid5416 4 роки тому

      Thaaanks

    • @chira4real
      @chira4real Рік тому

      did i removed it

  • @douglasperez3977
    @douglasperez3977 4 роки тому

    Great..! Job ....!

    • @Jad6d
      @Jad6d  4 роки тому

      thanks please like and sub

  • @melbinvarghese2888
    @melbinvarghese2888 4 роки тому +3

    Can you give the technical specifications of the diaphragm, so that I can buy it separately from a spares shop?

    • @Jad6d
      @Jad6d  4 роки тому +1

      sorry but logitech did not provide any, maybe you can bring it to the shop with you

    • @amargupta705
      @amargupta705 3 роки тому +3

      Brother go and visit 'ALL ABOUT JUGAAD' channel he has a permanent solution for Logitech X50 cracking sound. Cause i was having a same problem like you👍

    • @gitagupta3825
      @gitagupta3825 3 роки тому

      @@amargupta705 yes bro i had seen his video he gives a really good solution for Logitech X50.

  • @julianperez513
    @julianperez513 7 місяців тому

    Se mojo mi logitech x50 maldita sea sera que hay solución😢???

  • @bryanrafsanzani225
    @bryanrafsanzani225 3 роки тому

    may i know the driver name and size? i was searching for that & cant found it

  • @Noir-mh3es
    @Noir-mh3es 6 місяців тому

    i use a masking tape with T-7000 adhesive

  • @Yhill_nn
    @Yhill_nn 4 роки тому

    would this apply to cracked bass sound? i've got mine dropped a few times (this speaker is really sturdy btw). the mids and highs are still working ok, but the bass got affected. even when youre just listening to a vocal recording of people speaking, but a bit bassy, it's cracking. i think a part of it broke inside coz when i shake it, i hear something from it, like a piece broke. i hope it's not major and can still be fixed

    • @Jad6d
      @Jad6d  4 роки тому +1

      yes the tear will cost the bass sound to crack

    • @Yhill_nn
      @Yhill_nn 4 роки тому +1

      @@Jad6d cool. Im gonna try to fix it. Hope i wont do more harm lol

  • @marknielalcabasa8717
    @marknielalcabasa8717 3 роки тому +1

    I used glue for the speaker and it sounds like new must try

    • @swetharavi4906
      @swetharavi4906 3 роки тому

      But it gets teared again....

    • @marknielalcabasa8717
      @marknielalcabasa8717 3 роки тому

      @@swetharavi4906 put 3 to 4 coat glue on the all speaker

    • @marknielalcabasa8717
      @marknielalcabasa8717 3 роки тому

      @@swetharavi4906 if you use glue sticks it will not bounce and no bass trible only

    • @swetharavi4906
      @swetharavi4906 3 роки тому

      @@marknielalcabasa8717 thank you... 😊

    • @shafanisa3608
      @shafanisa3608 3 роки тому

      what if i use silicone rubber sealent? is it okay?

  • @kayemendoza3726
    @kayemendoza3726 3 роки тому

    Hi. I can’t seem to open the top cap even after using hot air. How do I do this?

    • @Jad6d
      @Jad6d  3 роки тому

      just force it, maybe the adhesive is stronger on your unit

  • @arieltemp
    @arieltemp 2 роки тому

    How many inch on this speaker??

  • @carlitosmontejo5441
    @carlitosmontejo5441 2 роки тому

    If it worked for me thank you very much I love you

  • @karansingh-tu4eg
    @karansingh-tu4eg 4 роки тому +2

    Has it repaired upto 90% bro

    • @Jad6d
      @Jad6d  4 роки тому +1

      yes about 90% sound quality

  • @Mhoon21
    @Mhoon21 2 роки тому

    What is the size of the speaker

  • @yasukayami1820
    @yasukayami1820 3 роки тому

    Where i can buy tools

  • @frankofranko282
    @frankofranko282 3 роки тому

    What size of the speaker..

  • @premkhatoi4348
    @premkhatoi4348 4 роки тому

    How New spekar replace

  • @shivamsingh40
    @shivamsingh40 Рік тому

    Still can't open the top lid

    • @Jad6d
      @Jad6d  Рік тому

      you can use a blower to heat the top portion to soften the adhesive

  • @Professorii
    @Professorii 13 днів тому

    I need that speaker...is this available in online store ?? Anyone know what says the name ....I just checked company description and there only mentioned 38.1mm driver..

  • @deeprana6069
    @deeprana6069 4 роки тому

    From where we can buy this rubber ring

    • @Jad6d
      @Jad6d  4 роки тому

      you cant buy that, thats why we need to DIY fix it

  • @jasperkennethsi
    @jasperkennethsi 4 роки тому

    Thank you hahahaha

    • @Jad6d
      @Jad6d  4 роки тому

      welcome, sub it will greatly help :)

  • @dream0darkness013
    @dream0darkness013 3 роки тому

    Mine has no sound whatsoever

  • @vivekdasakashdas5737
    @vivekdasakashdas5737 2 роки тому

    A Kash DJ

  • @sreyasdaniel7860
    @sreyasdaniel7860 3 роки тому

    You are a legend

  • @brentgiant.v.2691
    @brentgiant.v.2691 3 роки тому +2

    Sa akin linag yan kulang ng stick glue

  • @ayushjoseph2886
    @ayushjoseph2886 3 роки тому

    You can deny or ignore the truth but you can't change the truth.
    Jesus is the only and only way to heaven.
    Repent for your sins.Jesus Christ is Lords of lord.There is no other way to get heaven without Jesus.He died for mankind sins and ressurected from death ,And his second coming is soon.
    Today is the time ,
    whosoever believe and obey JESUS
    Will get Salvation and will be saved from eternal death.
    REPENT FOR YOUR SINS.You don't know when you will die.
    JESUS SECOND COMING IS SOON

  • @farhadrahman1658
    @farhadrahman1658 Рік тому

    Useless tips.

  • @ryanreylozano131
    @ryanreylozano131 3 роки тому +2

    Exactly the same problem. Thanks mate.

  • @ayushjoseph2886
    @ayushjoseph2886 3 роки тому

    You can deny or ignore the truth but you can't change the truth.
    Jesus is the only and only way to heaven.
    Repent for your sins.Jesus Christ is Lords of lord.There is no other way to get heaven without Jesus.He died for mankind sins and ressurected from death ,And his second coming is soon.
    Today is the time ,
    whosoever believe and obey JESUS
    Will get Salvation and will be saved from eternal death.
    REPENT FOR YOUR SINS.You don't know when you will die.
    JESUS SECOND COMING IS SOON