8:50 - I believe that's a correction constant for fuel consumption. If your computer is under- or overreading, you can correct it by changing this number
God bless you my friend you are my hero God bless you I hear your videos and I learn a lot plus I fix my car too God bless you man that's what I can say thank you very much
Menu Nr. 14 FS-Eintraege means error memory entries. As far as I know you can read the error codes which your car has. Google will tell you what they mean. Menu Nr. 20 is the correction factor for the computer to calculate the fuel consumption. You can set it higher than 1000 if it is computing too low, and lower than 1000 if it is computing too high. I mean if the display says 12 l/100km and in real it is only 9 l/100km the factor is wrong. In my 3 series it was 1134 instead of 1000 somehow, and the consumption was always shown higher than it really was.
I have question, i want to buy E90 and in my country its mostly took down KM by alot. I seen on your car it show working hours 1600 H, average speed around 50 km/h. So when you calculate its around 80-90k km. Your board say 190k km which say it was 120 km per hour average... So what's with that?
In order to check the km you will have to use a proper scanner or carly app (for bmw). There are a lot of modules that store the real km on the car like: key, instrument cluster, CAS, abs module and so on. I didn't notice that on my car but for sure after software update has began with 0 km. (The instrument cluster I mean)
Ok here is the hidden menu. Number 1 = i have no idea Number 2 = I really dont know what that mesns Number 3 = i dont know what this means ..................... Cool video man 👍👍😂😂
FS-Eintraege means how many errors it has in the memory. Is there a way to put like the water-temp. into the main menu? I mewn the menunwhere you can go throuh it with the bc-button on the indicator?
So id done the code OFF part on 01 of the menu, then i go to the 07 part where he checks the temp and let go of the button the same as he does and it just goes back to the original screen of showing the time and under it says +24°C, is that my coolant temp or is my thermostat bad?
Menu no. 6 is the tank and its two chambers, you can see how much fuel is left in each one, and the third digit is the total amount of fuel left in the tank. No. 20 is fuel consumption correction. The no. 1000 is 100%, if you change it to a greater or lesser number the fuel consumption on the digital computer will change too. For example your car burned a certain amount of fuel (e.g. 6l per 100km), and it shows 6.2l, so you have to correct it and change the number to 968, so that it shows 6l not 6.2. A pure mathematics. C'mon, man??? Recording a video and you don't know what you're showing??
i have shown how to acces the menu and i shared all the infos that i had. if u check my facebook page you will find all the infos available for all the menu numbers. @warpdrivem on facebook. thx for your infos!
Definately coolant . Your temp goes up , higher than say...100 , fan kicks in to cool it down to 85'ish , and so on . Coolant temp is never constant at 90 degrees.
Hi Warp Drive M, does the hidden menus stay on when you're driving? The digital speed would be great if it can be accessed through the BC button scroll.
Harry Yang all the features will be on till you shut down the engine. you can scroll aswell thru the menu...but if u have it all the time on your dash u have to code the car! thx
@@mauricio9022 - not temperature no but with Carly you can code certain things - I got a digital speedo readout (small) which can be selected between actual speed and the one they typically display that reads higher than your actual speed. Once you have Carly you can display the various temperatures on your smartphone - engine oil, coolant, transmission etc. DashCommand also works quite well for basic stuff but in terms of diagnostics the Carly adapter is quite powerful and will work with both Carly and DashCommand. For BMW diagnostics Carly for BMW is the best at a reasonable price
Is there any way to leave the coolant temperature on all the time like one of the main menus on the square box so when you can select BC you'll see the coolant temperature thank you
It's show you lock on because the nr is not correct you have to add the last digits from Left to Right or you have to push again the small needle from cluster to unlock! Success!
Then you added the last 5 of the vin wrong. Once it's correct next time you go to 19. It'll say lock off. But you'll have to do it each time before driving. I use menu 7 for temp. Between 85 to 115 is averages for temp in C°
+Michael Spardaro for every reprogramming action you will need NCS expert or Carly app or another programming tools. You have to know what you are doing otherwise you can brick your computers.
8:50 - I believe that's a correction constant for fuel consumption. If your computer is under- or overreading, you can correct it by changing this number
BMW makes you do the Peter Panda Dance to get any data
God bless you my friend you are my hero God bless you I hear your videos and I learn a lot plus I fix my car too God bless you man that's what I can say thank you very much
Really helpful used to check engine coolant sensor is working ok. Thanks
ur german is pretty good my friend! like to see that
It would’ve literally been faster to add a temp gauge in the cluster than doing all this.
you need to be A) german and B) engineer to work with this shit xD
the best i ever saw ! big like
I was able to reset my fuel guage using this as well. Thanks for sharing.
how?
How? Can you explain it to me
I dont think ill be messing with this but its cool to see what you can do💪🏻
Finally normal explanation
Hold Press
CTFU bruhhhh
🤣🤣🤣🤣🤣🤣🤣🤣
:D :D :D .... English is not his main language. But yeah that is sweet and funny :)
Why on earth did bmw make this so fucking complicated 😩😩
Menu Nr. 14 FS-Eintraege means error memory entries. As far as I know you can read the error codes which your car has. Google will tell you what they mean. Menu Nr. 20 is the correction factor for the computer to calculate the fuel consumption. You can set it higher than 1000 if it is computing too low, and lower than 1000 if it is computing too high. I mean if the display says 12 l/100km and in real it is only 9 l/100km the factor is wrong. In my 3 series it was 1134 instead of 1000 somehow, and the consumption was always shown higher than it really was.
Thx for the infos. After this video I've posted a complete list on my Facebook page @warpdrivem with all the menu's
your video help me. thank you
Thanks for information , is useful 👍
I have question, i want to buy E90 and in my country its mostly took down KM by alot. I seen on your car it show working hours 1600 H, average speed around 50 km/h. So when you calculate its around 80-90k km. Your board say 190k km which say it was 120 km per hour average... So what's with that?
In order to check the km you will have to use a proper scanner or carly app (for bmw). There are a lot of modules that store the real km on the car like: key, instrument cluster, CAS, abs module and so on. I didn't notice that on my car but for sure after software update has began with 0 km. (The instrument cluster I mean)
Ok here is the hidden menu.
Number 1 = i have no idea
Number 2 = I really dont know what that mesns
Number 3 = i dont know what this means
.....................
Cool video man 👍👍😂😂
FS-Eintraege means how many errors it has in the memory.
Is there a way to put like the water-temp. into the main menu? I mewn the menunwhere you can go throuh it with the bc-button on the indicator?
4:27 TANK LEFT - RIGHT and BOTH
I have no idea why I watched this ;)
As coolant temp is available to be seen in hidden menu is it possible to code it to normal main menu somehow?? Did anyone tried it??
i want the same answer !!!!
Me too
Thank you for this. Danka bro
Thanks. Good instructions.
Thank you. Very good informative video
So id done the code OFF part on 01 of the menu, then i go to the 07 part where he checks the temp and let go of the button the same as he does and it just goes back to the original screen of showing the time and under it says +24°C, is that my coolant temp or is my thermostat bad?
Thank you for this
THANK YOU THANK YOU THANK YOU!!
14. FS means Fehler Speicher - how many error codes are safed atm
Felicitari,dupa accent mi am dat seama ca esti din Romania
Ha ha...ms 😎
That's what I was wondering too
If my car doesnt show hours, it means that someone turn down the millage?
I have a one question ... which is code for fog lights bmw e91 318d 2009
Fog lights are in FRM module. All the mods could be done with carly app or ncs expert
@@WarpDriveM ok..which of these h7,h4,h11 or..?
Facelift model LCI H8
@@WarpDriveM viel danke bro.. 🤗
Thank you. GOD bless
Can I save those next to the consumption, how much I have left to drive, you know the things you operate with the left stick. Thanks great video!
Nothing from hidden menu can be saved. Only if you code the cluster (kombi).
Warp Drive M oh ok thanks! Have a great day!
found this menu by accident, i had no idea.
Same here and I glad I did
They should’ve kept the temperature gauge standard on all e90 smh
Good point, but they used the instant fuel consumption as a trademark instead and the water temp is usually not needed if the car is reliable 😉
Warp Drive M instant fuel gauge doesn’t make any sense to me. Its ok that’s BMW
Will the temp or digital speed stay on display or only when delving in these menus?
Only if the menu is started you can see the Infos after turning off the car you have to start everything from the beginning
Coolant temp is #7 under KTMP-MOM
Menu no. 6 is the tank and its two chambers, you can see how much fuel is left in each one, and the third digit is the total amount of fuel left in the tank.
No. 20 is fuel consumption correction. The no. 1000 is 100%, if you change it to a greater or lesser number the fuel consumption on the digital computer will change too. For example your car burned a certain amount of fuel (e.g. 6l per 100km), and it shows 6.2l, so you have to correct it and change the number to 968, so that it shows 6l not 6.2. A pure mathematics.
C'mon, man??? Recording a video and you don't know what you're showing??
i have shown how to acces the menu and i shared all the infos that i had. if u check my facebook page you will find all the infos available for all the menu numbers. @warpdrivem on facebook. thx for your infos!
CoolestVideo onUA-cam
How do you change it and will it benefit the cars fuel consumption .?
Can you explain what's the reset menu 21?
Is going to reset all the fuel consumption, time, in fact all the saved values
Fantastic, thanks!
I never knew BMW had this hidden feature. Might strip my car to see what other hidden features it has.
hi :) the number 7 you sure is coolant temperature not the oil engine ? because on my disel i have 94°c to 105
Definately coolant . Your temp goes up , higher than say...100 , fan kicks in to cool it down to 85'ish , and so on . Coolant temp is never constant at 90 degrees.
I guess most of the info can also be read through an OBD2 code reader
Yes some can be read with a good scanner, but not all.
I pressed the damn button but it is showing nothing. Any idea why I am not able to access this "secret menu"? Pls
Hi Warp Drive M, does the hidden menus stay on when you're driving? The digital speed would be great if it can be accessed through the BC button scroll.
Harry Yang all the features will be on till you shut down the engine. you can scroll aswell thru the menu...but if u have it all the time on your dash u have to code the car! thx
You can code some of these readings so they change using the BC button - I did some of this using Carly
@@Jagshemasher you coded temp cooling ?
@@mauricio9022 - not temperature no but with Carly you can code certain things - I got a digital speedo readout (small) which can be selected between actual speed and the one they typically display that reads higher than your actual speed. Once you have Carly you can display the various temperatures on your smartphone - engine oil, coolant, transmission etc. DashCommand also works quite well for basic stuff but in terms of diagnostics the Carly adapter is quite powerful and will work with both Carly and DashCommand. For BMW diagnostics Carly for BMW is the best at a reasonable price
Very nice. Thank you.
I’m unable to unlock the menu and I’m sure I’m doing it right. Any advice? Thanks
For sure you are doing something wrong because this is the method that is used in service as well. It works 100%
Mine doesn’t come up for some reason after following these steps
it is not very simple.Is it possible to make it with a tester?
thank you.
how you did headlights so glossy and colorful?
this is the video in wich i installed the wrap: ua-cam.com/video/mRBOFFjl4AE/v-deo.html
hi, what is the normal operating temperature for the n47 engine? in this menu mine goes from 89 to 95 celzius
Between 88 and 105 °C so its running normal
it's under pressure so even when it goes to 100c it's fine
Thank you for sharing it
Thanks for this. Going for a drive now to check the temperature on my 330d is ok👍👍
Does it go back to normal if I want it to?
It always goes back after you turn the ignition off
Consumption for the whole week...1000L wow really ? This guy is funny :))))))))))))))))))
Is there any way to leave the coolant temperature on all the time like one of the main menus on the square box so when you can select BC you'll see the coolant temperature thank you
Thanks
What would the reset option do? Number 21. What does it reset
+Hadi Mikdad I have no ideea...and I couldn't find anywere any info about this
everything like clock, date . Range. And do on :D
Hey man, I need your help. I got my code from the first menu. It adds up to thirty but when I put the code it nothing happens and it doesn't unlock.
Very useful. Cheers
hello, I have bmw e91 2006 gasoline my temperature to 106 then goes down to 102 in town. that's normal ???? greetings from Germany
Hello, do you mean 106 °C or 106° F
The temp must be at 87 °C or about 189- 190°F
Warp Drive My temperature is only up to 120
Warp Drive M 106 c
KORR VERB is probably to calibrate fuel consumption
It might be...(verb- verbraucht/consumption)
awesome
Danke
bmw e92 320i 2011, i cant acces the hidden menu using the vin number calculation method, after i insert the sum of digits menu is still Lock:on
It's show you lock on because the nr is not correct you have to add the last digits from Left to Right or you have to push again the small needle from cluster to unlock! Success!
Then you added the last 5 of the vin wrong. Once it's correct next time you go to 19. It'll say lock off. But you'll have to do it each time before driving. I use menu 7 for temp. Between 85 to 115 is averages for temp in C°
BTW mine is a 2010 528i. So I know it'll work on yours
I just get the numbers in the top box and nothing on the bottom box
HOW DO YOU RESET OR REPROGRAM THE GAS CONSUMPTION GAUGE?
+Michael Spardaro for every reprogramming action you will need NCS expert or Carly app or another programming tools. You have to know what you are doing otherwise you can brick your computers.
from the center display/computer
How can I reset my fuel gauge it's stuck
You can use the test menu nr 2 to see if works and if works the sender unit in the tank it might be bad or you can use the reset menu 😉
Apa pe loc este in crestere, depaseste si 75 grade dar cand sunt in miscare nu urca peste 60
Thermostatul trebuie schimbat. Temperatura de funcționare e intre 80 si 88°C
Te pup!
What’s code 24 mean
The menu goes only till 21. Not sure what you mean. Where did you saw 24?
This is for people why cant afford to buy the Carly adaptor and permanently code it.
When you turn the car off it's all gone doing it this way
Is Carly app a subscription service or flat one time fee which includes software updates?
Fabulous info!
number elf ich packs nimmer hahaha
After this watching video , I feel sorry for bmw owners, really sorry...😂😂😂
For snow i see that in my carr
Și dacă vei sa iesi din meniul asta în cel normal cum faci? Ai filmat atât și nu arăți cum ieși
iei contactul si iasă automat.
🤗 🤘😊🤘
Medium consumption 🤣🤣🤣
191k, high mileage !
I know but for a diesel is not that much. By the way I recently sold this one and I bought another one a gas one with 128k. Go check my other videos.
300k here :) thats high
that is kilometer not miles. thats around 120k miles
Menu 12 i don't have idea, menu 14 also dont have idea
Salut!
Esti Roman.
Salut, da 🙃
@@WarpDriveM locuiesti in America?
Nu, in Germania 🇩🇪🇷🇴
www.bimmerboard.com/forums/posts/876857 This page will tell you what all of the codes mean and how to get to them.
Koja glupost u Bmw E90!
Svi modeli prije uredno su imali pokazivač temp,a moj e90 lci umjesto toga ima econometar nebiran uređaj
H
It's a bullshit waste of time !! BMW has let itself and its customers badly down with this useless disturbing of the instruments panel !
interesting but not practical. wtf is bmw thinking?
I dont understand how you activate the water temperature actually. You show how to see the menu, not how to activate the function. Useless.
Just watch it again...
interesting but not too usefull
Thank you. Very good informative video