Beats By Dre Beats X Wireless Earbuds Main Wire Replacement | Repair Tutorial
Вставка
- Опубліковано 27 гру 2024
- Send your device in for repair 👉 bit.ly/2wwrMdQ
Are you a repair ninja? Buy the parts here 👉bit.ly/2SEZQjW
Tools used in this repair? Buy the tools here 👉bit.ly/2FhciPv
Steps to fix your device.
1. Heat up the right side of the Beats X near the main wire
2. Pull up on the plastic cover to expose the mainboard
3. Unsolder the battery
4. Heat up and unsolder the board from the beats X right side
5. Now heat up the left side of the beats
6. Expose the main board
7. Unsolder the mainboard from the left side earbud.
8. Get back to jamming out 🎵
Feel free to reach out to our radical animal-friendly support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)
If you are tired of pre-gaming or talking with our radical animal-friendly support team and find yourself pondering the meaning of electronics as a whole, you can ponder them deeper by checking us out on these platforms for social-ish activity:
Snapchat @joesge
Instagram @joesge
Facebook @joesge
-
JoesGE.com is a pretty cool place (depending who you talk to it might be more than pretty cool. But hey, I'm just writing this down so that it says something down here, because that's more professional right?) and if you're still reading along at this point you might as well sit down and grab some popcorn because this is about to trail on about how we are this premiere repair service located in Washington State North of Seattle in basically the "Armpit of the US" near Mt Baker (Mt Baker has the world record for most snowfall at 1,140 inches in a season).
All this to basically say that we are all addicted to coffee and stay in the warehouse for ridiculously long hours in order to keep up with the demands of the youth for these two-sided head audio devices and speakers that float when you throw them in the ocean or in your bathtub to test if they actually float. On top of that, we do like it when less stuff ends up in landfills so we hoard everything on shelves with wheels so that we pollute less, it just sits in our warehouse losing molecules slowly over time degrading to become smaller and smaller.
If you are still reading at this point you deserve an award, or a high five, or something because you must either be the most patient person on the planet, or you read blogs frequently. And if the latter is the case, then this whole thing must seem pretty short so let's keep going.
We do some really interesting things here at JoesGE which are frequently documented in our sometimes weekly sometimes never vlogs.
Also, if you are wondering how we keep up with the demands of the people so well, its because 90% of the people that work here are all Russian around getting things done most of the time. Yes, that was a pun, you are welcome. We hope you have a pun-filled day, because who couldn't use a few laughs?
Beats X Main WIre Part = www.joesge.com/products/beats-by-dre-beats-x-beatsx-main-internal-neckband-wire-replacment-parts
Solder Iron = www.joesge.com/products/60w-adjustable-led-soldering-circuit-board-repair-iron-kit-tools?variant=40553764192302
Do you happen to have the wiring diagram?
I do not think we have a wiring diagram for those earbuds.
Ok. Thanks for your response. Any chance you could explain which wire goes where, please?
Can you please make a video of joining the cut wire of the above beats? My Cat chewed it. 😥
We don't do that repair since it wouldn't be a permanent fix.
Do you happen to know what is the colour of the wires behind the pins @11:04 top to bottom or you never take apart that plastic stuff?
Anyway, you are doing an amazing job! Thank you :)
I am looking for the colour of those wires too. Do you knows em?
@@waiyanhtay2812 sadly, I didn’t find the right combination or a color-coded scheme, which is why I have ditched the project of repairing my Beats… 😔
Sorry to hear that bruh. Thanks anyway mate. Take care
is the black wire the neutral one in the lipo battery?
Hello, thanks for commenting. Please email us at support@joesge.com and we will be able to better help you there. - Aaron P
My have the same exact problem , do you have q website or something where you came fix mine and how much would you charge me for ?
We unfortunately do not repair the Beats X anymore we do sell the parts though.www.joesge.com/products/beats-by-dre-beats-x-wireless-repair-parts?_pos=1&_sid=dcf116631&_ss=r
Where to get the replacement cable?
Hello, we do sell the part here 👉 www.joesge.com/products/beats-by-dre-beats-x-wireless-repair-parts?variant=32334670364718
what is a hair-like yellow wire?
In this specific case, where was the fault in the wire? just trying to understand why you replace the whole harness rather than reconnect or repair the connections/pads (assuming that's what failed)
Hello, thanks for commenting. Please email us at support@joesge.com with your question. We will be able to better assist you there. - JoesGE
Hello how i can know the problem is the main wire or the battery ???
Hello, thanks for commenting. Please email us at support@joesge.com and we will be able to better help you there. - Aaron P
To everyone I 100% recommended to send in your beats for repair I trust these guys I have before sent two beats studio I believe two years ago and it was broken like the ear piece was just hanging there and the other one was a snap pair and both are in great Condition
Thanks for trusting us with your repair Carlos. Happy we had a chance to help you.
Oy vey the soldering! My hands aren’t nearly steady enough lol. I may or may not have destroyed the board in the process lol. Whoopsie! The main wire, the battery, chip, and the left, and right earpieces are still good though. Oh and I warped the housing for the charger lol. Live and learn right? I knew what I was getting into before I began so I wasn’t worried about bungling it. If you’ve never done this before and your hands are shaky like mine, get these guys to do it. It’ll save you some headache in the end.
Sorry it didnt go as planned.
@@Joesge it is what it is. I knew the risks. I definitely learned during the experience though. I have no regrets.
@@Joesge I love being in charge of my own business
Good job!
Thank you! Cheers!
Nice. Would have been better if it was a bit closer tho... 🤷🏿♂️
“Take your flat head and just push it in, should slip off” bruh mine doesn’t even budge, and I fear I have now damaged the cable that goes to the earbud (which was probably anyway the issue in the first place)
Sorry that this video didn't help you
Crazy
It’s a process.
Easy. Just kidding.
It’s a process 🤓