SAB Panel Liner Review + BMC Comparison: Which Should You Buy?
Вставка
- Опубліковано 3 жов 2024
- A review and comparison of the SAB and BMC panel liners.
SAB 패널라이너 리뷰하고 BMC와 비결해보기! 어떤 제품이 더 우수 하나요?
Support us: / frostedsnow
Newtype Affiliate Link: newtype.us/fros...
Instagram: / frosted.snow
Tiktok: / frosted.snow
Kugdai: / kugdai
Watch the SAB panel liner unboxing:
• 1/72 The-O, SAB Panel ...
Watch the Resin Basics series:
The Resin Master Trailer: • The Resin Master
01. Resin Basics Intro with Kugdai: • RESIN GUNPLA for Begin...
02. Resin Pre-assembly: • HOW TO BUILD RESIN GUN...
03. Resin Clean-up: • CLEAN RESIN PARTS - Ho...
04. SD Jesta Full Build Completion: • Video
05. 1/60 Guncannon Full Build Completion: • 1/60 GUNCANNON: Trash ...
Shop My Tools:
Amazon Storefront US: www.amazon.com...
#gundam #gunpla #sab
Heya everyone! If you don't see the panel liners on Newtype yet, just wait a tad for it :)
Just bought the 0.2 and 0.5 I can’t wait to try them out!
@@scottle4085 Awesome!! Enjoy em :)
@@frostedsnow have you tried Dspaie , they are really good price and would like to see a comparison or if you have used them know your thoughts .
He's trying so hard and doing so well. I respect his passion and effort! Great video as always!
Thank you so much!
The ending with Kugdai was amazing. I could feel how hard he was trying while also getting frustrated.
He's a trooper!
At least he is trying to explain what he’s going to do well it’s nice he’s willing to do this
He enjoys talking about this kinda stuff!
I've been checking Newtype literally everyday since the last video and I watched this one right after I finally put in my order and now I'm even more excited! I've had about 4 kits in my backlog because I wanted to line them and now with your inspiration I can try to tackle resin kits too. Thank you both for the video and for your hard work.
Oh you have! Luckily you didn't have to wait too long. Enjoy the chisels :)
Hello! Sharon and Kugdee. Hope that you are both well and your family's. The items that you get for free is wonderful for you both. The hobby is expansive. And with your reviews of the items that you get we can then make up our own minds weather to buy them or not. And makes buying items easier. Thank you both for the reviews. You have both sold me on buying a set of sab panel liners. As better the tools will always make the building easier. As i will keep supporting you and buy from newtype. As to keep the program going. As you both do wonderful and professional work. Thank you both for another wonderful program. Wishing you all the very best for now and the future.
John, your messages are always so lovely to read. The hobby can really get expensive indeed! Thank you always so much for your support.
Been waiting for this and you know I used the link! Thanks frosty and cookie! Good job cookie! English is getting better everytime!
Thanks for waiting and using the link!! You're awesome! Kughee is still studying English bit by bit everyday :)
frostedsnow no problem! :) love you guys! Plus, Im pretty sure we wouldn’t be able to get them without you guys so thank you!
Thanks for the update on the SAB scribing tools. Used your link and got a whole set on order.🙏
You're welcome! And you are just superb. Thank you so much for using the link on a whole set! Enjoy em :)
love the Video I think Kugdai really sells me on the SAB ones with the feel of them in the hand ,he is also getting much better with his english :)
Thanks Anthony! We really think they are a great quality product. He's working hard on his English :)
That ending, kugdai is so cute! XD
Lol and I'm just like -__-
@@frostedsnow HAHAHA! Both of you are amazing!
The ending of the video was great, much respect for the effort.
Glad you enjoyed!
Just bought some of these with your affiliate link and I can't wait to try them out! Thanks for the great video!
That's really awesome of you! Thank you. Hope you enjoy the liners :)
Kugdai is getting better fast! Thanks for the very informative vid, keep up the good work!
Glad you enjoy it!
Thank you for recommending these chisels, the BMC chisels have been sold out for a while and I saw this video. When Kugdai said these were better than BMC, I knew I had to get these, and wow am I glad I did. They are so easy to use. thank you for the recommendation! And I am a big fan of you and your husbands work. I aspire to be on that level one day lol
You will get to the level you want the more build! Enjoy the journey :) oh and so glad you like the chisels!
awesome review! i think the real difference besides the dimensions of the handles is that BMC is heat treated where as the SAB is not, this will probably play a factor on how long the scriber will last. Kugdai's English is getting better! keep up the good work xD
Does the BMC being heat treated make them better in the long run?
@@iTsAznThunder heat treated means it's definitely harder. I guess we will see over time. I have a bunch BMC chisels and I just ordered my first saab chisel to try it out. I've been using a lot of madworks chisels lately. mainly because BMC chisels cost and arm and a leg and they stopped production recently and who knows when they will start again. I find the old madworks line is better and sharper than the new tungsten madworks chisels. they are easy to find and they are dirt cheap. cheers!
that last part though.. "iam going to pretend iam building. tell me when" 🤣❤🤙
hahaha love the bloopers at the end!!! thanks again for the honest review
Glad you like them!
These do seem extremely nice and well made. I expected them to be expensive given the quality but 300$ at a discount is outside of my price range sadly.
I love your videos, you always bring a smile to my face.
Thanks so much John!
Thank you for the review! Im working on resin kits now and this is the step I'm at!
Perfect timing right!
Great video as always I've been thinking about get a set of scribes to customize and clean up panel lines on my kits. Might have to get the SAB scribes since I got some sausage fingers! 🤣
Good timing! Yeay!
This genuinly was super informative! Great video!
Nice, I need to give this a try. I did come across lines that I find weren’t deep enough. This should help.
Glad it was helpful!
I have to say Kungdai made some really good points, I'll have to get some SAB they may feel better in my hands. Also hi Kungdai!!
If you have big hands and don't wanna buy holders, it'll be better to hold. And Hello from Kughee! :)
Really great review! Definitely seems like SAB is the way to go
Thanks Andrew!! We're big fans of the liners.
Um. Yes. Thanks for the informative video!!
Hi, I'm new to the hobby because G_Witch got me into this 😂 but as a beginner I have a couple of questions:
1. When should I panel line with a chisel?
2. If I'm not going to paint the kit, is it okay to use the chisel and then use my preferred panel lining marker?
Even if I will only stick to the G_Witch Gunplas for now, it's always awesome to see your channel.
1. Whenever you want to make the existing panel lines, bigger/deeper, or if you would like to create new panel lines
2. Yes, you don’t have to paint. You definitely should.I’m apply a topcoat before adding the panel lining though. So scribe new lines>topcoat> panel lining
Bro, my second kit was a master grade, and I fell in love with them. They’re magnitudes better than the hg kits. I have still built a few hg kits though, just to spice things up
Just started building HG gundam kits to start with. Practicing panel line colouring next.
Wow! That one take at the end! Nice one ^^
Haha, thanks! Improvement, right?
Absolutely 👍
I’ve been using 0.3 as my go to 😅😅. Time to lower it down then. Also it’s literally impossible to get BMC in australia :(.
if you feel okay with 0.3 ,it's okay!
Awesome review snow! If you or Kugdai were only to choose 3 or 4 panel liner sizes for your tool kit, which sizes would you choose? and tell Kugdai to stay classy ☕️😆
Hey NickDom, it really depends on what kinda kits you build. 0.15 for HG, 0.2 for MG. Then, look at the largest lines you will ever scribe on your kits, ex: if you plan to do large scale resin one day. I'd still just buy at 0.5 or below though, cuz in a pinch, you can use a 0.5 to scribe each side of a 1.0 panel line and get away with it, if that makes sense!
@@frostedsnow Thanks for the info 🙂 yeah makes total sense. I went with .2, .5 and 1 as a starting point. Mostly build MG and got into resin recently so pretty excited to try these out.
Nice 👍 I need some
It's good stuff!
Was looking at BMC but then that price really killed me. I then looked these up and got 4 of them. I guess now I know I made a pretty good choice.
Sweet shirt!
Thanks!
Awww Kugdai outtake =)
Went to Newtype and looked at buying 0.2 and 0.6. The shipping to Australia cost more than the two items. 🙁
Sorry to hear :( The owner is working on bringing it to non-US citizens, but the chisels themselves will cost about 50% more than on Newtype after amazon fees and so on. I will share on my social media if it's available in the future.
아죠시.. 연습 많이 하신 거였구나... 아마존에서 산 중국산 패널라이너가 너무 구려서 BMC 물량 풀리길 기다리고 있었는데 SAB로 해봐야겠네요!
Does the Madworks MultiFunction tool hold these chisels??
Kugdai : the bmc feels more sturdy and heavy duty
Also kugdai : my wife ( me ) broke my bmc
I know right lol
My BMC 0.15 broke when it dropped. But I bought all size from BMC Zero to 1mm.
For me, BMC is still the best. some brands are chasing BMC, Like LINE MASTER and SAB
Hi I got a question I building abuster tortoise zoids and I want to do some panel Liner and I don't know wish one to get can you please help me
Do you know what is the size tip for RG? In particular the Sazabi :)
Where can one get practice plastic to pratice scribing? Great vid btw!
Junk parts!
Does anyone know how to paint clear parts? You might be asking "Why not go to reddit?" because I am too lazy to read the answers. What I'm doing is painting the clear parts of the SDCS Phenex and I am using neon fluorescent paint, I am not doing it now but I just need to know how to do it.
Just airbrush it like you would normally with no surfacer and I use a clear top coat
what widths chisel do you use for panel lines? to make the original deeper
mentioned in vid!
Hi guys, what do you think about the ones from DSPIAE?
0:25 Been telling everyone the 0.2 is the go to! lol
Yes!!
PG 사용할 페널라이너 세 가지만 추천해 주세요
PG는 메인으로 .3이나 .4정도 쓰실거에요 ^^
@@frostedsnow 감사합니다
General scribing chisel question: Once they start wearing out, do people resharpen them, or just buy new ones?
These dont wear out too easily, bmc last a lifetime. Sab probably the same. You can resharpen them if you wanted but you need a specific tool if you dont want to risk ruining the angle. But could probably be done without if really careful . Tool is hard to get though outside of japan.
there are sharpening jigs meant for regular size chisels and even big lathe tools and they should work just fine for small tools like panel liners. as long as you set the correct angle and keep the tool from getting too hot it should be fine.
We don't and haven't heard of ppl in Korea resharpening them. We just keep using it
@@thebigbient8736 Good to know! My dad's talked about needing to resharpen woodworking chisels, so wanted to make an informed purchase.
BTW NEWTYPE DOES NOT ship international as of August 2023... the increased shipping costs after the pandemic have become exorbitant...
yall still think we should have locked our selves in our homes...LOL all the economic issues, fuel, food, travel..etc... collateral damage yet everyone is quiet...
how does it compare to Madworks? Lol! Haven’t tried both SAB and BMC. But Madworks is more available in the South East Asia region.
They dont lol
Have never tried Madworks before!
What type of tape did you use? Can you get it at any hobby shop in korea or do you have to order it?
pretty much any hobby shop I'm not particular about the brand
what is the typical size for stock panel lines? i just want buy one tool to increase the depth of the panel lines
I used the 0.2 on the MG tallgeese in the video
@@frostedsnow i want to pick one size so i can deep the panel lines of the kit...i don't want to add any new lines..do you prefer .3mm or different widths?
Geez, the pressure on those poor chisels
i just got ascriber so this will be good
They look nice but a full set is $300. a bit crazy.
You could sell a boat load if these were on a amazon store
The owner is working on it for non-US people, but said that it costs about 50% more than Newtype after all the amazon fees and so on.
@@frostedsnow i can see that.
Sería genial subtitulos en español
Hello, I have a friend who is studying in Seoul, I'd like to order Mr hobby & gianotes for myself and have him ship it to me, Could you please recommend a website from which I can order such things, also I'd like to order the chisels which you are promoting, Thank you in advance ;)
You can search Hobby Factory or Neighbor Hobby Korea for paints and tools/kits. chisels are here : smartstore.naver.com/globalgoods
@@frostedsnow Thank you, you are awesome!
Cute Cookie ~
He is! haha
Yooooooooo woooooooot
first
You beat me!!
But my main question is which one is cheaper because the BMC is already expensive lol
A moment of silence for the 0.8 ㅜㅜ
It's still alive and well, I just missed it in the assembly line as I was scribing onto the plaplate lol
second
Beated me to it!
@@frostedsnow i just glad you post a new video
i have been waiting
Brother Cookie, Fighting!!😁😂🤣
Speck or watch more english, fighting!!😁😂🤣
Fighting!! Thank you!