"BEAST" NEW Arrma OUTCAST 6s EXB RTR!!! Full overview, tips, and first Rip...
Вставка
- Опубліковано 30 чер 2021
- SAY WHAT!!!! It's finally happened. HUGE props to ARRMA for offering the ultimate extreme stunt truck in ready to run form. Had an absolute Blast trying this sucker out this maiden bash. Aside from a cracked wing mount, I had a breakage free first outing. Good thing, because I had a migraine and forgot my damn tool box. Gotta love a dull headache in the heat...Lol. Loving this new truck!!! Planning to go open rear diff and make some slight tuning changes. Thanks to Horizon Hobby, M2C Racing, and Fast Track Hobbies in Rocklin, CA. Bash on my RC Brothers...
If I haven't seen or replied to a comment or question, please don't take offense 🤗. On a road trip with family with spotty cell service. Loving this new EXB RTR 😍. Noticed after pulling the body I'd snapped my wingmount near the rear chassis brace. Aside from that, no breakages 💪. Good thing cuz I had a brain fade and forgot my damn tools 😝🤣🤣. Planning to tune and dial this sucker soon. Appreciate the comments, suggestions, and support 👍. Happy 4th of July!!!! 🍻😎💪👊👊
Can you make a video about setting droop?
@@jboymiller17 I've covered it in previous vids 👍. The main thing is you should have to push the shock rod ends upwards a bit to fit the shocks onto the A arms (push in the set pin) with the car on a stand. The idea is to adjust the droop screws so they push against the chassis at full droop and take pressure off of the shock rod ends. 😎💪👊👊
Sorry to ask again just want to check when I put 4s tyres on so I don't loose speed would it be worth it gearing up thanks for all your help
@@joevozzo1 no problem 👍. You generally want to go up 2 teeth on the pinion when going with the 4s Backflips. 🍻
@@richduperbash2966 thanks
I Love This Truck 😍🤘, thank you so much Rich for your supe unboxing, I really enjoyed it very much 😎👊, I also really like the outcast as' set, all the exb Parts are very interesting. Good test Brother, as always number 1🏆🤘🤘👊😎
Thank you dear brother for the huge shoutout, you are the inspiration for the whole bashing comunity brother 🥰. The Outcast looked super good, amazing. The bash looked solid as few, im gonna go to half on LSD what i normaly run, looks uo way to fast, and breaksloose.
You bet dear Brother 😍. Shout-out well deserved 🤗. You've been such an influence in the ARRMA and entire RC community 🥰🥰. Always willing to help guys and steer them the right direction. Truly appreciate the kind words and friendship Thomas. Agreed on the LSD 👍. Going open rear diff soon. The ground was bone dry and slippery loose of course, but I think open fits my tastes better. 🍻🚀🚀😎💪👊👊
Perfect bench overview and maiden rip Brother Rich!!👊Absolutely love that Arrma decided to make the Outcast and Talion an EXB/RTR! So easy to just plug and send!😜Killer jumps and sweet frontie!! I feel the Outcast 6s has been put on the back burner with all these new rigs and 8s line. Glad to see the EXB version lighting the spark again! Great vid my friend!! Have a great 4th!😎🤘👊🍻🍻
Thanks so much Brother Eric 😜. I had a migraine during the unboxing and maiden bash, but had a Blast testing her out anyways 😍. Stoked ARRMA decided to offer this EXB option 😱. The Talion looks absolutely sexy AF 👀🥰🥰🥰. Look forward to getting this sucker tuned soon. Dropping in the rear open 1.9mm shims after my trip. I prefer to whip the rear into turns personally 😉. The handling felt good overall out of the box though 👍. Appreciate the kind words as always Eric 🤗. Have a great 4th tomorrow!!!! 🍻🚀🚀😎💪👊👊
Awsome rig!! Nice to see the right people getting the new release first! Great shake down run dude!!🤘😱
Thanks so much Brother 😜. Really appreciate it. 🍻😎💪👊👊
I LOVE this truck! 2 exbs in one day! Arrma just keeps getting better ! Awesome video. Thanks for Posting!
Only thing that would make them better is if they were using your m2c parts as the standard parts for exb models, im surprises they haven't tried doing some sort of co-op contract
Thanks so much Brother Avery 😜!!!! Had a blast out there despite fighting a migraine 😝. Looking forward to putting some fine tuning on her. Thanks so very much for all you and your Dad do to push the hobby to the next level. Have a great 4th of July!!!! 🍻🚀🚀😎💪👊👊
Awesome video. I got out of bashing and have been racing for the last two years but this makes me want to bash again! That truck is the best looking RTR I've ever seen. It isn't quite where I had my last outcast but I wont have to drop tons of money in it when I get it like the last one. I love that big heatsink on the motor. A good fan and that bad boy will be ready to send! Great to see you're still out there doing this and making killer videos. Thanks Rich!
My favorite rig as an EXB RTR 👍👍👍 that is awesome! Arrma nailed it again, what a beautiful rig with sooo many improvements. Best Review as always 😍😍😍
Thanks so much Kimberly 😍. I think an EXB RTR is a great option 😱. The electronics feel super smooth too 👌. Just have to keep my motor temps a bit cooler. ARRMA did a great job here 🤗🚀🚀😎💪👊👊
Great review! Love Arrma's initiative lately!!!! Glad they came up with a better bumper too.
Thanks so much Brother 😜. I'm digging ARRMA's drive and progression 😍. This platform might not be perfect for everyone, but it's Killer to have different options. The bumper is awesome!!!! 🍻😎💪👊👊
Looks like a beast! 😍 And gosh your control is on point! 😉👍
Love the video. Have it on preorder. Hope it ships quickly!!!
Man, I must have been sleeping, as I did not know they were coming out with this rig! I love it and need to find one! Great stuff as always!!
I like you're chill attitude and way to present these videos well done budy great video to
Oh yah, baby!! Lets go!
Well they sent the right one to you Brother, I love this Truck!👍🏻 It's going to be no.6 in th Arrma stable. I was on the new Talion until I took a hard look at it, wow it perfect and the run you gave it convinced me for sure. Looking forward to more with it. Congrats to Arrma for putting out RTR EXB's. They just keep stepping up the game😁😁✌🏼✌🏼✌🏼🤟🏻🤟🏻🤟🏻
This will be my New Rig!!! I loved the look of the Black OK8's EXB roller. So glad they made the 6s version. Arrma is just Killing it! Great Rip Rich as always! Your driving is always on Point! Thanks for showing this new rig and can't wait for the adjustments you make to get it's full potential! Stay safe and bash on from Colorado!!!!
Thanks so much Ervin 😜!!!! So stoked ARRMA is showing the O6s some EXB love 😍. The fact that it's RTR is just icing on the cake!!!! Can't wait to get back in town and dive into the tuning 👀. I'll definitely get her dialed to my liking next outing. 🍻😎💪👊👊
Came to watch this video again- man this is a great truck 🛻
Subscribed. Insane skills man. Great work on capturing the excitement as well.
Thanks so much my friend 🤗. Truly appreciate the kind words 🍻😎💪👊👊
She looks sick mate, congrats on the new truck. Great video as always broski, Arrma coming through with the goods!
Thanks so much Brother Ed 🤗. Absolutely stoked to get this new rig 😱. She'll be nice and dialed next time out 👌. Just needs a little garage tuning love. 🍻😎💪👊👊
Awesome Rich. Congrats Bro. No doubting Outcast is the most Fun exciting truck in it's platform. It's agility, speed and gymnastic ability in unmatched. It's legendary status goes way back and I'm glad Arrma is now in tune and true with their Bashing at heart CORE mentality. We are now starting to experience the future of Arrma trucks in EXB and it's only gonna get better from here. Awesome first Go with Outcast 6s RTR EXB Bro Rich.
Thanks so much Brother Chris 😜!!!! So stoked to see the progression 😱. Yes.... she'll still get some M2C upgrades, but this is definitely a tough truck that will handle most bashing without issue 👍. ARRMA has come a long way since the original 06s in 2016 👀. Still such a blast to bash!!!! The platform will never get old. Can't wait to rip the skatepark with this sucker 😱🤣🤣. The EXB line is a direct result of basher's feedback and ARRMA's willingness to deliver what guys want. It's proof that they listen and respond. Such an awesome thing to see Bro. 🍻🤙🤙😎💪👊👊
Good stuff Rich!
Again, nice video. I’m going to use your advice you gave on motor mount bolts. I’ve stripped a few on my kraton exb. I only ran my exb outcast one time .
The ESC is acting funny. So once I get a new one in and the warm weather comes, I can’t wait to have some fun. By far my favorite looking truck! I can’t wait to get his big brother as well! As you can tell, I’m super deep into the hobby. I love it. I’m going to take my rigs and driving to the next level this year. I love every aspect of the hobby
Hell yeah God footage as always! Thanks arrma for the sneak peak!
Thanks so much Shawn 🤗. Bash on Brother 🍻😎💪👊👊
Good times Rich ! Stay Rad brother 😎 , my pre order has already been placed !
🤯 light bashing , great video like always 😂
Congratulations on the new outcast man. What a beautiful truck. I've been drooling over this and the Talion all day haha. I was kind of hoping they would do something new to the backflips but it's OK cuz the backflips are an amazing tire as is. It just would have been nice to try them belted. That one jump off the ramp felt like it floated forever haha and did I see it right that it front flipped then back flipped and your steering it mid air was just beautiful. I love the new front bumper on it.the new bumpers are just amazing. Do you like the lsd plates in the diffs on the outcast? Thanks for showing the new outcast. It'd nice seeing it shown and gone over .I've drooled over the pics lol but it's nice to appreciate it in a more in depth perspective for sure.congrats again on the new truck man I definitely look forward to seeing more of it 🍻🍻🍻🍻🍻🍻🍻🍻
I am so getting one. Great video
Sick rip as always man🤘
Love all these EXB rigs, I definitely want the Talion, I do prefer a long chassis though😁
My old mans Notorious is still going hard💪
Great vid. I purchased an Arrma kraton exb with my hard earned cash, and when it arrived it had no motor mount hardware. I called Arrma and expressed that…. 6 weeks later the parts showed up. So I had their roller lacking parts to actually get it up and running for 6 weeks and after sending multiple emails about my concern, nothing happened. But nice to see they can send you one at no expense so you can produce a video!! Horizontal hobby is killing it!!
Thanks Brother 👊. That sucks it didn't come with the proper hardware. Quality control issues are frustrating 😝. I would've just messaged them and ran to Ace Hardware to get running sooner personally. The stock hardware is typically grade 10.9. It's fine for general bashing, but better to get 12.9 grade for high torque areas. 🍻😎💪👊👊
Bro, thanks for the overview, now I am going to buy one.....soon!
You bet Brother 👊. Definitely a super FUN and highly capable rig. Hope to get her out again soon!!!! 😎💪👊👊
Nice truck Rich, I ordered a bunch of M2C upgrades like $700 cad for my K6 V5 rtr. Hopefully it will take a bashing without busting or bending shock towers and chassis, I got the ZRS shock caps too. Thanks for the tips and continued inspiration to push our rc rigs as hard as you can. Happy Bashing!
Thanks so much Steve 🤗. There's nothing like building your own custom M2C Beast 😱. The design and grade of 7075 with Mitch's parts is on another level no question. You still want to avoid hitting huge boulders or curbs at warp speeds, but she should do fantastic for regular, extreme bashing with hard hits 💪. My biggest thing is keeping the fasteners snug and healthy so the parts can keep doing their job as designed. Happy bashing to you too Brother!!!! 🍻😎💪👊👊
I love your videos bro! Awesome stuff.
Thanks Brother 🤗. Truly appreciate it.
🍻😎💪👊👊
Lol i knew it! I knew you were going to be one of the first to get it from Arrma. Badass, though im disappointed they didnt do a 1/5 monster truck like a granite or big rock
awesome rc and bashing
Damn it really looks good👍🏾
Nice . Another awesome review , I just ordered mine today , looks like I’ll have some fun . It’s going to be a roller 8s . All that air off your new improved ramp? Sick as always 👍😉
Can’t wait to see TALION
Awesome video rich.
Thanks so much Brother 🤗. Really appreciate it!!! 🍻😎💪👊👊
That's how you break in a new truck man 💪
Great Vid..Enjoy My Outcast but this EXB looks Amazing along with the hop ups I had to add to my V5..The EXB is the way to go with pricing..Lookn to get the Kraton EXB as my next basher..🤘👑❤
I was wondering when the Outcast 6S would be released in EXB form! Dope.
The best truck all around hands down .ARRMA!!you make good videos hella good driving bro
Thanks so very much Wayne 🤗
Nice rip, brother!!
Thanks Brother 🤗. It takes getting used to the LSD diffs on her, but I'm digging it. 🍻😎💪👊👊
Man I’m really stuck in between this and the new Talion! Killer session as always. The Outcast 6S is sweet looking now💪🏼👍🏼
Get em all I say 😂
I just got the Talion a few weeks ago I will most likely pick up the outcast EXB/RTR as well... dude, who am I kidding 😂 I’ll take the whole 6s line up when I can afford it! One rig at a time...
That’s a really nice looking RC and great bash session as always. I think I will get one just have to wait til they are back in stock. Appreciate the shout out and look forward to seeing the next vid 👊👊💯💯
Thanks so much Mike 😜!!!! Your Typhoon fan is absolutely insane 😱🤣🤣. Can't wait to put it to good use soon. Really appreciate it Brother 🍻🤙🤙😎💪👊👊
@@richduperbash2966 👊👊💯💯
Eventually im going to have to get some of your fans for my reeper, hopefully you got some compatible with a 4985
@@restinpiecesrc5528 Whenever you’re ready I will make sure you get the correct at up for your RC I appreciate the support 👊👊💯💯
Killer rip there brother.
EXB is the new BLX🤞
Smart move by Arrma for a RTR EXB line/options with this and the Talion.
Cool how Horizon sent Eric the Talion and you the Outcast as you guys might lean that way in preference? It's like they know you guys 😎👍
Interested in this with the LSD's as you mentioned it handles different. I know it's dry and slid around a bit more but maybe the LSD's help with that🤔 which was nice to see.
Arrma Killing the game
Great sends off the new ramp, that save about half way through... WTH was that😱😂🤣
.... Love it brother
Laters
Thanks so much Brother Dennis 😜!!!! They probably sent me the Outcast cuz I have nice skateparks to rip her around in 😱. She's right in her element on hips and vertical transitions 🚀🚀🥰🥰. Definitely taking a visit to the concrete jungle soon. Dude it was wicked summer dry and slippery at this break in spot. Great place to test the LSD handling. I'll likely be going to an open rear diff. The handling felt good, but I like being able to whip around turns faster with max agility. Appreciate the kind words Brother. 🍻😎💪👊👊
7:56 😂🤣 your laugh makes me laugh everytime....Great Video and always love your content....lot of love from DALLAS TX.
Thanks so much Brother 😜. Gotta love the good times in our hobby 🤗. Happy bashing my friend!!! 🍻😎💪👊👊
@Rich Duperbash facts...I'm finally finished rebuilding the diffs and diff cases and gearbox on my outcast 6s EXB RTR...I haven't even gotten a chance to enjoy it because the diffs gears teeth were all broken in the gearbox just on my second 5 minute run...making a video to upload on my channel, but I should've done like you said and added shims...wish I seen your tips day 1 when I bought mine...lesson learned..how is yours holding up
@@DaVerseOfficial mine is holding up solid. The ARRMA EXB shim kit is great if you want to replace the LSD plates and just go with traditional open diffs that you tune with different weight oils. That's honestly my preference overall. Still running 50/200/20k front to rear 🍻
@Rich Duperbash thanks a lot for the info. A lot of people run different oil weight, but I trust your opinion the most because you put your RCs through the MOST HEADACHES/BASHES/WORSE NIGHTMARES...lol, but you have fun doing it and give GREAT tips...if something happens with my setup, I'm going to rebuild my diffs with your recommendations. THANKS AGAIN💯❤️🤝🏾👍🏾🍻
Great Vid as always. Send it Brother !
Thanks Brother 🍻😎💪👊👊
I just bought the talion exb but can’t get it til Friday. I can switch it to the outcast. I can’t decide. I think I like the talion better I’m just worried about parts availability.
What batteries do you recommend for this type of bashing on the 6s EXB? What's a good spec range on the lipo.
EXCELENTE VIDEO AMIGO!! ME GUSTO MUCHO! 😃 +1 SIGE ASI AMIGO! TIENE BUENISIMA PINTA ESE NUEVO OUTCAST!!
Hey Rich duperbash I have a question? If you were to choose which one would you rather get? I'm thinking about getting a Arrma outcast 1/8 exb but idk if I should get the RTR or the roller? Thank you!
Wow, everything about this video is impressive.
Thanks so much Brother 😜. Really appreciate it. 🍻😎💪👊👊
I noticed with having the LSD center diff set to maximum effect REALLY heats up the electronics.... I'm running a castle 1520 1650kv motor, no cooling, 20 tooth pinion, heats up very quick, a lot quicker than I'd expect. When I had the original 2050kv motor (not the spektrum motor) with a 14 tooth pinion, and standard center diff, my temps were really solid even without a heatsink. I ran about 200k in my center differential as well. These LSD diffs just allow for the power to be distributed so much better, almost perfect 50/50, which is a lot of strain for the motor.
Wowww ..
Nice video bro, crazy bashing..hahahhahaha..
I like it..😘👍👍👍
Thanks my friend. Much appreciated. 😎💪👊👊
awesome rc want one
Real beast👍🏽💪
With the game changer fans, are you connecting that to the loose wire that you zip tied up or are you connecting it to a designated battery?
Rich enjoy your road trip your always good about replying to a comment……o and no reply needed here brother haha. Now that truck looks amazing but I am partial to that Talion release, the V2 6S Talion was my first Arrma and introduced me to the brand before it exploded in popularity. 🍻🇨🇦🤝
Just added a v5 notorious to the fleet, super pumped to try this short wheelbase platform 😍😍😍
CONGRATS Steven 😱. Give yourself time to adjust to the air control. It's actually pretty challenging compared to the longer Kraton or Talion. Great pickup though 😍. I've kept atleast 1 or 2 in my fleet since the original was released in 2016 🍻
The Outcast is one of the all time favorites!so glad they decided to offer this Stunt truck in a “upgraded” form!
Great video as always brother!!!! Can’t wait
To hook up again and try that new mega ramp!! 😎🤟🏼🤟🏼🍻
Thanks so much Brother Dave 😜!!!! I think it was just a matter of time 😱. Definitely one of my all-time favorites too Bro. Can't wait to hook up again. Hopefully, the wind and heat will cut us a break. Have a great 4th Brother!!!! 🍻🚀🚀😎💪👊👊
Awesome 🤩
Cap head bolts are awesome, i use them in my reeper to hold that big hobbywing 4985
Yes Rich 😎 what an intro to a new rig super strong out the gate it seems tho will you link us to those 12.9 hardwares you spoke off for the underside of the chassis to the braces that would be great thanks for the show and Risk🎯💎
Thanks Brother 👊. Here's where I order my 12.9 goodies. Monsterbolts.com 🍻😎💪👊👊
that ramp jump at @11:53 is awesome! I got genuinely scared
I been out the hobby 15 years. Last car a Savage 25 nitro. Bought an outcast 6s exb without putting any research into it and couldn't be happier. Electric came a long way.
Yeah it's nuts how much RC has changed 👀. Brushless power got me hooked back in the hobby after 20+ years away. Enjoy my friend!!!😎💪👊👊
I just bought my notorious a month or so ago. now I NED THIS!
It’s almost the same thing. You could upgrade the parts to the exb.
interesting concept. Now you can buy a rtr that can go pretty hard. I dig it.
Nice review , does this car do standing backflip like the normal outcast 6s?
Once again a killer video. The minor tweaks you do to this ready to bash version, I wish they would incorporate into the released version. Sometimes it’s the little things that can really make a difference over time.
Thanks so much Brother 😜. ARRMA has incorporated several ideas directly from basher feedback 👍. That's part of the reason I share mine on the channel to help encourage them.They adopted the 20mil center diff fluid and 39T spur gear idea months after seeing the results with the V1 Kraton 8s in bashing situations with true 1/5 aftermarket power systems 💪. They also earlier incorporated tower to tower bracing from basher influence. Smaller details like going to M4 where the front chassis support bolts to the top plate 🍻. They definitely respond to sound ideas and readily accept feedback for improvement. 😎💪👊👊
@@richduperbash2966 that is very cool you can help them in that way. You are their little Bashing QA.
Yesss the Front Flip smooth like Butter!!!
Thanks Jesse 🍻😎💪👊👊
It's a perfect flying machine !!!
As always, great vids and content! Few questions: Do u find standing the shocks as straight as possible as opposed to laid down absorb landings better? Also have u tried putting slash 4x4 shocks under the stock shocks? Looking to get a little more cushion and reduce chassis slap
Thanks so much my friend 🤗. I find the stock shock position often works best for all around use. Tuning the stock shocks makes the biggest impact. Double shock set-ups are generally too stiff depending on the spring rates and dampening and leads to crappy handling.. I always recommend relatively easy chassis slap. It takes significant stress off the hubs, arms, and the rest of the suspension components. The best suspension set-up I've found is the M2C ZRS bladderless set-up. I installed it after this first run. I'm a speed basher and prefer plush handling overall. That's how you get the power down. 😎💪👊👊
Yes yes&yes brother Rich awesome 🏁👊
Thanks Kizzel 😜. Hope all is well Brother. Happy 4th!!! 🍻😎💪👊👊
@@richduperbash2966 happy 4 to u as well brother thanks
Family always 1st Rich! Enjoy ur holiday!
Thanks Brother 😍🍻😎💪👊👊
Man what I would do to get a new Arrma truck from them! I literally want to get one of every Arrma model hahah 5 down so far! Just need to get a decent camera to try out making a video 👍 Love ALL your content Rich! You're the main reason for me choosing Arrma when getting into RC last summer 👊
Thanks so much Brandon 🤗. I'm most grateful to have found this truck sitting on the porch 👀. Definitely was a huge surprise 😱. I definitely hear you about wanting all the models Brother. They each have their own unique handling and bashing experience 😍🍻😎💪👊👊
I hope their T6 heat treatment issues are resolved because I'd really like to try one. Wouldn't wheel spin reduce the load and run cooler? Learning here.
Will see how their T6 fairs with harder use 🤔. I have an extra M2C chassis on standby from my original beefcake Outcast build. Tore that rig down to build my longer Orange Darling XL with the Mojave chassis 😍. When the tires keep breaking traction and spinnig at this bone dry spot, I end up using extra throttle (high RPMs) to achieve the speeds I'm after. Winding the motor up and down rapidly gets it hot easily. Sand running heats up electronics too, similar to grass. 🍻😎💪👊👊
@@richduperbash2966 Gotcha. Higher rpm to achieve the same speed. Thanks! 👊
So should I look into shimming my Kraton EXB that I just got or is it something I should run and then re-look at it?
Also what battery do you run for the fan setup? Or what is recommended to run them since I assume your hooked up to the regular batteries that is running the rig.
I usually check my diff and shock fluid levels early to ensure they're adequate. Typically within the first few bashes. That's when I add the crown gear bearing shims if not sooner. I either use 2-3 Tekno tkr1222 shims (.10 thick) or pair them with the .20 shims. I use a 1300 mAh 3s lipo with the GCRC fans. 🍻
@@richduperbash2966 gotcha, so mainly if I just check the fluids at least and top it off or change them out to some other combination I should be good. You do know if you just send me your Kraton or OutKast EXB you could just precheck then before you send them to me... Just saying 😜😂😂 If I don't annoy you beforehand you and your family have a safe and fun 4th of July buddy
Hey can you give me a quick rundown on how you have your shocks and diffs tuned on your outcast trucks? I'm kinda new and I wanna get my rig dialed in 👊✌😎
Dear god do you have a pilots license,it seems you were flying at 30 thousand feet.nothing but respect and props to the OG RC master.
I would like to get in touch with you for help with my kraton 6s exb. What you do with the diffs and suspension is awesome. Thanks
That exb bumper 😍. Reinforce that body so we can abuse it soon 😉. Itching to bash but still waiting on my notorious m2c chassis to show up
The bumper is a Huge improvement 😱. No more Tbone required 👌. Leaving town for a family get-together this weekend. Hope you get that chassis and we can connect again soon John 😱🚀🚀😎💪👊👊
hey rich, i got myself one of these a while back. and i want to put the 16 tooth pinion on. and i saw you put some different screws in the motor mount. What size are they and how many washers did you put in there aswell?
Hey Ben. I use 20mm M4 socket head screws with M4 washers, just one washer per screw. The socket heads take a 3mm driver and are almost impossible to strip. You can crank them down proper tight 🍻
Do you think I can put a 1100 kv hobbywing on one of these? I'm getting it for my girlfriend. Super nice run btw.
Is avc not your cup of tea? Or worth using here and there? Any reason why you don’t keep it turned to zero vs completely disabling it.
I only like slight AVC when doing straight speed runs on road. I like to have full control of what the cars doing and make my own subtle corrections as needed 👍. Disarming the AVC through the programming ensures there's no interference occuring through any of the inputs. 🍻😎💪👊👊
hay there SuperBash. im still catching up with your videos. i got the addiction yesterday and went ahead and ordered the Outcast 6S EXB. I have the 6S and 8S Kraton. i kept kicking myself for buying a truck so close to what i have. but something you said in the vid. if you have the kraton you will still want the Outcast. So im taking your word for it. I cant wait to start taring it down before my madden voyage with it. So... what is your latest set up you running in the Diff's.? so i have a good start when i get in on line. keep up with the awesome vid and great tips and advice.. thanks Rich.
Thanks Brother 🤗. For the Outcast 6s EXB, I'm running 50/200/20k front to rear diffs. For the Kraton 6s, I'm running 50/500/20k, but I'm running a standard open center diff (no LSD). 500k was too much with LSD. 🍻😎💪👊👊
Love this and the new talion exb
Me too Brother 😱. ARRMA keeps surprising us with awesome options. The Talion looks so bloody fast 👀🍻😎💪👊👊
If An Out Of The Box R.C Can Withstand Your Driving 😱😱 It's Going To Sell Like Hot Cakes 👏👏👍
Hi Rich, I was wondering what you would recommend for a MAX6 combo 1650kv motor fan and/or heatsink? I was doing some research and I couldn't really find anything that would fit!
Hey Dustin 🤗. Pretty certain with the included removable HD zip ties the Game Changer RC heatsink would fit no problem. You can reach Mike at his eBay store under contact seller. He'd steer you the right direction. 🍻😎💪👊👊
@@richduperbash2966 thanks for the advice Rich!
😂Laugh definitely reminds me of my late uncle lmao.. I miss that guy
Question...im looking to upgrade my ESC away from the V4 (6s kraton) Blx185. I want my new ESC to be compatible or capable of running lower KV motors without cogging issues. Whats your dream motor for the 6s line?. Is the new V5 spekra 150 capable of running it? Do you feel its a worthy ESC? Or do I need to go with its big brother that Arrma puts in the 8s line, the spektra 160a. Or Will it be too big for my 6s kraton, and not fit? Im staying with Spektum line cuz I am experimenting with their smart stuff. looking forward to your advice. Thanks RICH!
I'd say running a 160A ESC is always better with the higher torque motors. I'm still running the Spectrum 8s Firma ESC in my Kraton EXB 6s, been almost a year 👍. It's a snug fit, but works no problem. Just have to Dremel the small lip off the ESC tray and remove the 8s mounting tabs. Same footprint as the Max6 and Hexfly Hex6. Just started using the Firma 150A ESC with this new release. Not sure about it's full potential just yet. 🍻😎💪👊👊
@@richduperbash2966 Nice... and the motor you recommend with your 8s firma for 6s? your the best!
@@richduperbash2966 Wait... if you remove the four 8s mounting tabs... how do you mount it?
@@EastTactics I really like the Hobbystar 1730kv 4092. Tons of torque and super fast with a 20T pinion. Normally use 30lb mounting tape and a zip tie with my ESC. 🍻
@@richduperbash2966 Awesome! I like it! thanks again. Between my post here and your answer I spoke to a guy who says Shoe goo works fantastic too to hold the ESC to the plate. Thanks again Rich.
Great video!! Would you choose this rig over the Mojave EXB 1/7? I'm looking to snag one of these. I own a Kraton and want another rig!
Thanks so much Brother!!! Both the Outcast and Mojave are Mad fun 😍. They're 2 totally different rigs though. If you like easier stunts and tricks, the Outcast is the one. The Mojave is about 2" longer than a Kraton. It gets the power down easier than the Outcast and is probably more fun to drift and just rip around with. Go with whichever one interests you the most. 🍻😎💪👊👊
Bonjour super video😀
So I have a notorious v5 6s, so what your saying is defiantly install that 16t pinion that comes with it. I’m pretty new to the RC world
I prefer Robinson Racing Extra Hard #1216 pinions myself Aaron 👍. They last way longer than the stock pinions. You'll have way more speed and wheelspin running the 16T. Just keep an eye on temps. I'm not new at this, but haven't ran the newer Spectrum 6s electronics long enough to trust their limitations. You should aim for around 150F tops on the motor temps. Much hotter and you should consider gearing down. Past 170F can be damaging to the motor over time. 😎💪👊👊
@@richduperbash2966 awesome thank you for the response much appreciated!
was gonna buy a outcast 4S! but horizon has these on sale for 489!!! gonna get one on the way and maybe talk my oldman into geting one as well
Hey Rich. What do you think about the stock S652 servo? Stay with it or replace it right out of the box with Savöx 1210?
I would probably swap it out. Have a look at the Power HD 23kg WP. Same specs as the 1210, but much cheaper and mine have outlasted the 1210 overall. Think it's got stronger gears. 🍻😎💪👊👊
@@richduperbash2966 Thank you Rich...
So you think they will come out with an exb kraton 6s ready to run???I know they have a rolling body but it would be amazing if they came ready to run 💪🏼
I'm thinking they probably will Ari 🤔. Definitely think it's a great idea overall. Options are always nice🍻😎💪👊👊
729? The service sucks I have went thru 4 servos and 2 esc horizon replaces it but sucks something breaks each run. That’s on my exb Mojave and Kraton both 6s
Great vid! I have a kraton 6s and the shafts keep popping out of the dif cups in the front , I changed the dif cups to m2c racing and it’s stillhappening any feedback would be appreciated.
Thanks Brother 👊 I've had this happen periodically, but mostly while running flexible RPM arms. I also had an issue with my EXB K6s 😝. The solution was removing the lower red strengthening caps. You might have to remove the pillow ball spacers to shorten the throw between the outdrive cups and hubs. 🍻😎💪👊👊
I didn’t see any ballooning. Are those a new belted version like the new Talion EXB has?
These are the regular dboots Backflips 6s tires. Venting makes a huge difference for ballooning. 😎💪👊👊