I LOVE sounds from ST’s the 2 in 1 exhaust … despite I’m deaf with cochlear implant. I alway live for that sounds for years and it’s my favourite sound for years and still it is … so happy to hear that when you switched on 🙏🏼⚡️⚡️🙌🔥
Hell yeah just got my bars and risers installed and copped the brown handlebar plus bag definitely going to make it a goal to put every thrashin part I can on my 03 gunmetal blue metallic unit the mid bend bars and risers with the goodntites with grade 8 hardware are fuggin rock solid, I'm going the same route as the 100 yr black and silver unit yall featured, but I want a daggum sticker in my order this time lmao 🤣
I just picked up my lowrider st. Those stock pipes would make a good boat anchor. I can’t wait to get a pipe. Even slip-Ins (I had inexpensive sharkroad slip ons on a 2021 streetglide special 114, and the slip ons by themselves not only sounded good, but the torque Omg!! I am going to check out thrashins pipe sounds awesome!!
This is gunna sound crazy bro but you gotta trust me, try it on a personal dirt bike exhaust or something if you don’t believe me. After you install a new exhaust, before you ride it you have to get it spotless clean with brake cleaner and “blue it”. Intentionally heat the pipe up and let it blue in a controlled environment when it’s spotless clean. If you dont eventually the exhaust will get hot enough to blue, it’ll blue all weird and not uniform or beautiful with a bunch of spots burnt on anywhere there was dirt or debris. You get one chance to blue one pretty the first time you start it after install. Start the bike with the heat shields off and the exhaust spotless clean from brake cleaner. Let the bike warm up, then just hold it at about 3k rpm until the headers start glowing red, let them get nice and red, then cut the throttle and begin to roll it open, let it close, roll it open, let it close. Letting the engine breathe will cool the exhaust back down, when they’re not red shut the bike off. They’ll cool down gorgeous blue and never change color again
I’ve done it at least 5 times, from motocross bikes to brand new Harley’s. It sounds wild I know and I don’t blame you for not trusting it, I learned it from an aviation genius/3rd generation gncc rider. Last time was a full akropavic system on a vrod, it came out so dope!
Did you tune the bike ..reason I'm asking I got some Vance an hines pipes an a performance air cleaner I'm about to put on and wondering if I should tune it ..thanks
I’m also considering the dual exhaust for my lowrider ST. I feel like it will fill the space underneath the shortened right side bag much better than the 2-1 exhaust would. Just by eyeballing it from pictures of it what looks like a 2020 lowrider S I think it would clear the bag. I would just like to see it done before I put the money into one. But the bike they show is close to what I envision for mine. Mini floorboards and the same bar set up but dual exhaust
We actually had a customer who is already running duals on his FXLRST. He is stoked with it and no issues so far. WE HAVE NOT personally tested it yet, and may recommend some heat tape under the bag, and to make sure your bike is tuned. The exhaust does fit with the bags, we just want to verify the exhaust gases and heat of the bag. For the most part it should be good, but if the bike is overheating and sitting in traffic or 1 place too long, maybe it could be an issue. We will confirm soon.
The look and sound is awesome! Polished stainless totally primo! Curious which baffle in that system! Dog ball or flow through! Cory didn’t mention! Gonna have to call the store!
Pipe sounds dope! What size risers and bars are on that bike with the pipe? 6.5” risers and mid bend bar/stock bar? Going to be ordering up some parts for mine. Patiently waiting for the video of yours with the upgrades before deciding what size risers/bar to go with. ✌️
What’s the lead time on these? Put an order in for one about 3 weeks ago. I assume it’ll take a few months. Not at all being pushy, I know you guys are a a small operation and busy as fuck. Appreciate you guys!
Hey Dylan, Here is great link to learn about Anti-Reversion crateinsider.com/using-anti-reversion-to-create-free-power/ "To make a long story short, reducing and or eliminating exhaust reversion is free power. Or at the very least, it’s cheap power. Preventing reversion will reduce the contamination of the air/fuel mixture by the spent exhaust gasses and will improve the efficiency of the engine. It’s really a very simple concept when you look at it in simple non-technical terms." We have teamed up with Feuling Parts to bring you the ultimate in V-Twin Performance Exhaust. Over a year in the making and countless hours spent on design and in the Dyno room, we bring you the all new THRASHIN Anti-Reversion Exhaust system!
This is 1 of 4 baffle options for this exhaust, this baffle is the 2 1/2" stepped to 2 3/4“ perforated Feuling 'Dog Ball' baffle Part # TSC-1961-0. Designed for larger cubic inch high performance engines, this baffle has a 2 1/2” inlet stepped to 2 3/4”. This is a high flow baffle that produces superior low/mid range torque without sacrificing top end power. Aggressive crisp and snappy sound with the signature 'Dog Ball' higher RPM note. IF YOU WANT IT LOUDER and a bit more raspy, customers go with 2 1/2" straight through perforated core Part # TSC-1952-0. Designed for high performance and larger cubic inch engines looking for a very aggressive sound.
Sound is night and day. Maybe Harleys can sound like that in the future with the new supreme court rulings on EPA. Though Cali will never change. BTW who makes your exhaust?
This is bad I’m falling in love with the LRST. I got a big bore RG and it’s bad ass . But something about this mini road glide is starting to grab me a bit
@Tarthu Ruttle the new cam from woods thru fuel moto? Was thinking about the 777xe cam and the contender pipe for the ST. What did your hp/tq numbers look like and at what rpm after tuning?
Right on I’m just waiting on my pipes from you guys to get done and I’ll be rippin and dippen on my 2022 low rider S… I have the 9.5 risers the mid aggressive bend bars the thrashin perch clamps on my bike now. Love them and how they feel I’m 5’8 and it’s what’s most comfortable for me! Check out thrashins vid on bars guys if your not sure but everyone is different so whatever works best for you I also have some parts to still install derby cover billet lever shifter with tip linkage points cover and my p-54’s all by thrashin if they got a part my bikes got it all on there.
Hey Frankie, I appreciate your perspective. I’m 5’8” too and just got my 2022 FXLRS a couple of weeks ago. I don’t know about you but I’m experiencing numbness in my right hand after about 20 or 30 minutes or riding, not to mention some shoulder pain - both of which got me thinking that maybe some pullback risers might alleviate those issues. Also, what seat are you using? I’m concerned I may have ordered a seat (before I even had the bike) that will exacerbate the problem - the Whiplash Speed Co. Slipstream, which I understand lowers and moves the rider back (maybe not ideal for a shorter dude) rather than, say, a Saddlemen Stepup, which I understand might raise the rider up and push him a little forward. Guess I’ll find out soon enough on the Whiplash seat. Anyway, I welcome your thoughts or anyone else’s on risers, bars, and seats.
@@davidh.2477 yep I get it in both after a few mins of riding also I changed grips and that helped a bit but not by much I have heard of softer grips or grip busters but have not tried them also maybe some different gloves 🧤 but don’t wanna feel like you have a pillow in your hand cause you definitely wanna make sure we have that hand to grip contact. It’s just one of those things I thought 💭 my risers oils help cause they are pull backs but again it did not help that much just put me in a more comfortable riding position.
@@frankiechavezio3857 That's sucks that you get it in both hands. I had never experienced that with another bike -- not with the Road King I traded in for the LRS, nor with my Bonnie T120. I'm thinking maybe it's just the higher bar position that I'm not really used to. Even with the stock riser, my hands are raised up and more level with my shoulders, whereas with the other bikes it's a more relaxed and less aggressive posture, with my hands down well below my shoulders. Maybe we got bad circulation?? Or maybe it's more common than we know? Anyway, curious to know what seat you're on. Ride safe, thanks bro
I LOVE sounds from ST’s the 2 in 1 exhaust … despite I’m deaf with cochlear implant. I alway live for that sounds for years and it’s my favourite sound for years and still it is … so happy to hear that when you switched on 🙏🏼⚡️⚡️🙌🔥
So glad you guy's got an ST!! I've had mine for about 2 weeks. Got all kind's of T/C parts going on it.
Hell yea, next week we are going to start tearing into ours!! Keep an eye out
Do you sell this exhaust, but blacked-out? I can't find that color option on your website.
I’ve always loved a 2 into 1 exhaust
My springer softail had a Hooker 2 into 1 with and open end bell
I loved the way it sounded!
I just got a '23 FXLRST... The stock pipes are embarrassing. It sounds like 1000 butterflies queefing simultaneously.
Amazingly accurate description
That comment made my cry 😂
I just got a ‘24 and came here for this comment I felt the same
Hell yeah just got my bars and risers installed and copped the brown handlebar plus bag definitely going to make it a goal to put every thrashin part I can on my 03 gunmetal blue metallic unit the mid bend bars and risers with the goodntites with grade 8 hardware are fuggin rock solid, I'm going the same route as the 100 yr black and silver unit yall featured, but I want a daggum sticker in my order this time lmao 🤣
I really like the sound of that pipe. I just wish it didn’t aim up in the air.
🤘🏼Mines on order for my ST!! put that bad boy on the Dyno! Let’s see what numbers that pipe puts up! 🙏🏼
Stock 0:49 Thrashing exhaust 1:21 throttle 1:53
I just picked up my lowrider st. Those stock pipes would make a good boat anchor. I can’t wait to get a pipe. Even slip-Ins (I had inexpensive sharkroad slip ons on a 2021 streetglide special 114, and the slip ons by themselves not only sounded good, but the torque Omg!! I am going to check out thrashins pipe sounds awesome!!
This is gunna sound crazy bro but you gotta trust me, try it on a personal dirt bike exhaust or something if you don’t believe me. After you install a new exhaust, before you ride it you have to get it spotless clean with brake cleaner and “blue it”. Intentionally heat the pipe up and let it blue in a controlled environment when it’s spotless clean. If you dont eventually the exhaust will get hot enough to blue, it’ll blue all weird and not uniform or beautiful with a bunch of spots burnt on anywhere there was dirt or debris. You get one chance to blue one pretty the first time you start it after install. Start the bike with the heat shields off and the exhaust spotless clean from brake cleaner. Let the bike warm up, then just hold it at about 3k rpm until the headers start glowing red, let them get nice and red, then cut the throttle and begin to roll it open, let it close, roll it open, let it close. Letting the engine breathe will cool the exhaust back down, when they’re not red shut the bike off. They’ll cool down gorgeous blue and never change color again
I’ve done it at least 5 times, from motocross bikes to brand new Harley’s. It sounds wild I know and I don’t blame you for not trusting it, I learned it from an aviation genius/3rd generation gncc rider. Last time was a full akropavic system on a vrod, it came out so dope!
Before pipes, I'm going to have to try those floorboards.
Man I hope the hype for this bike dies down soon so I can get one lol
Did you guys put a tune on the bike with the pipe? If so, which one?
Unfortunately during the time of this video, it was not tuned
I really wish this was available for the touring bikes
I love the drivetrain wine from that bike almost like a gear drive!
Sounds like a thunderheader on a twin cam so that’s cool for m8 owners. I like it.
Did you tune the bike ..reason I'm asking I got some Vance an hines pipes an a performance air cleaner I'm about to put on and wondering if I should tune it ..thanks
What finishes are available on the exhaust? What other things that are needed
Can you guys do clutch and break levers
How do you only have 34.9k subs? Should be 349k
I have the screaming eagle 2-1, wpuld I notice a difference with yours
Would love to see the thrashin dual exhaust on it since it similar to the stock one been thinking of ordering one for mine!
I’m also considering the dual exhaust for my lowrider ST. I feel like it will fill the space underneath the shortened right side bag much better than the 2-1 exhaust would. Just by eyeballing it from pictures of it what looks like a 2020 lowrider S I think it would clear the bag. I would just like to see it done before I put the money into one. But the bike they show is close to what I envision for mine. Mini floorboards and the same bar set up but dual exhaust
We actually had a customer who is already running duals on his FXLRST. He is stoked with it and no issues so far. WE HAVE NOT personally tested it yet, and may recommend some heat tape under the bag, and to make sure your bike is tuned. The exhaust does fit with the bags, we just want to verify the exhaust gases and heat of the bag. For the most part it should be good, but if the bike is overheating and sitting in traffic or 1 place too long, maybe it could be an issue. We will confirm soon.
@@THRASHIN Do you have any pictures of the bike👀
Support from Sweden 🤘🏼🇸🇪
The look and sound is awesome! Polished stainless totally primo! Curious which baffle in that system! Dog ball or flow through! Cory didn’t mention! Gonna have to call the store!
Probably just straight pipe w fiber rapped around a perforated pipe..!
Do you guys not offer the polished finish anymore?
Thats night & day difference for the better!
Pipe sounds dope! What size risers and bars are on that bike with the pipe? 6.5” risers and mid bend bar/stock bar? Going to be ordering up some parts for mine. Patiently waiting for the video of yours with the upgrades before deciding what size risers/bar to go with. ✌️
Can we get it polished through y’all? Or is something we’d have to do? Also what baffle and pipe size?
What’s the lead time on these? Put an order in for one about 3 weeks ago. I assume it’ll take a few months. Not at all being pushy, I know you guys are a a small operation and busy as fuck. Appreciate you guys!
What’s anti reversion do for the exhaust and performance??? And also who makes your pipes ? 🔥👊⚡️🤙
Hey Dylan,
Here is great link to learn about Anti-Reversion crateinsider.com/using-anti-reversion-to-create-free-power/
"To make a long story short, reducing and or eliminating exhaust reversion is free power. Or at the very least, it’s cheap power. Preventing reversion will reduce the contamination of the air/fuel mixture by the spent exhaust gasses and will improve the efficiency of the engine. It’s really a very simple concept when you look at it in simple non-technical terms."
We have teamed up with Feuling Parts to bring you the ultimate in V-Twin Performance Exhaust. Over a year in the making and countless hours spent on design and in the Dyno room, we bring you the all new THRASHIN Anti-Reversion Exhaust system!
Sounds alright
This is 1 of 4 baffle options for this exhaust,
this baffle is the 2 1/2" stepped to 2 3/4“ perforated Feuling 'Dog Ball' baffle Part # TSC-1961-0. Designed for larger cubic inch high performance engines, this baffle has a 2 1/2” inlet stepped to 2 3/4”. This is a high flow baffle that produces superior low/mid range torque without sacrificing top end power. Aggressive crisp and snappy sound with the signature 'Dog Ball' higher RPM note.
IF YOU WANT IT LOUDER and a bit more raspy, customers go with 2 1/2" straight through perforated core Part # TSC-1952-0. Designed for high performance and larger cubic inch engines looking for a very aggressive sound.
Sound is night and day. Maybe Harleys can sound like that in the future with the new supreme court rulings on EPA. Though Cali will never change. BTW who makes your exhaust?
Lance, what tuner did you installed with the pipes?
Can you guys make a video with those dual anti-reversion headers/pipes?
This is bad
I’m falling in love with the LRST.
I got a big bore RG and it’s bad ass .
But something about this mini road glide is starting to grab me a bit
I’ve got a brand new ST, I wanna put those boards on and exhaust, where are you guys located? And what parts do I need?
Are y’all going to work on a touring version of this exhaust?
What brake lever/pad are you running on the ST with the exhaust? I’m about to order those boards!
What did you change out the pegs to ,need a suggestion and risers thanks
Did you all have to tune it , after those bad ass pipes???
Sold
Stoked 🙌
Do i need a tune if i swap my pipes?
Which dog ball baffle was on this pipe ?
For a stock 117 ?
what boards are those? been hoping to buy them. passenger boards?
sounds bad ass!!!!
Hell yea, and if you want louder you can run the straight perf baffle we offer! Many choices with this exhaust
Hey Thrashin, are the cats in the headpipe or the muffler on the LRST?
Mufflers
Your website has a few different options with sizing and baffle. Can you tell me the exact specs to the one in this video??
Check out the description on the video 👍🏻
Hi, where can i contact you about the sponsorship?
Do you have data on the pipe in terms of Dyno numbers? What tuner is your friend using?
Hey David, we have a couple Dyna before and after on our website on the actual exhaust page. This friend has yet to tune his bike 😩😬
Tune or nah
Yoo when are you guys going to start making some pan america parts?? I'm a huge fan
DOES IT COME IN BLACK OR BLACK CHROME
how about that setup in black? my el diablo is on order and i would love to upgrade stock to that setup but in black
Had my Diablo for a few days ordering these tonight!
Anything for the new Road glide ST?
were working on it!
Are those mini boards still mid controls?
Yes
Will this exhaust fit the road glide ST? If not, are you planning to do one for it (2 into 1 of course!!!)
We are actually going to test fit it soon. We will see!
@@THRASHIN fingers crossed. Desperate for something that looks as clean as this one 🤞
Thunderheader is the way
Siiiiick. 🔥🤘🤙
Thanks brother!
If you were to choose a cam to compliment the 2-1 AR pipe on a 114 FXLRS which would it be?
Star 30/30
@FRWD_JKU appreciate the input man. Have put the 777xe in it since. Things a rocket above 3k. The 30/30 sounds like a favorite though for sure
@Tarthu Ruttle the new cam from woods thru fuel moto? Was thinking about the 777xe cam and the contender pipe for the ST. What did your hp/tq numbers look like and at what rpm after tuning?
@@fvgc454ss not sure, it hasn't been on a dyno yet
@@tarthuruttle1166 id be real interested in the results
Bad Ass Sound very great 😁😁😁😁😁I love it
Any tune added?
No tune. Would be even better and snappier if it was.
Which tuner(s) out there might have a the correct or “close enough” map for that exhaust?
@@THRASHIN please respond which tuner is the best for optimal function, I am interested in getting this exahust.
Tnx what is the ppoint of this comparasion . ?? Pur another pipe we all know stock sucks !!
What's the riser inch?
Freakin bad ass guys!
Thanks Michael!!
Kinda sounds like a sewing machine. Funniest shit ive heard all day! 😂
that thrashin pipe sounds bitchin!
Hell yea, and if you want louder you can run the straight perf baffle we offer! Many choices with this exhaust
Those M8’s are soo quiet compared to the v-twins. I like the look, I like the power but the sound is trash.
I like my pipes how I like my knobs…polished
Same!
A loud bikes a safe bike. #loudpipessavelives
Thanks right! Thanks for the love Mr. SD!
The one with exhaust sounds cammed
Haha I wish! Buddies bone stock bike, just threw a pipe on it. Not even tuned.
Right on I’m just waiting on my pipes from you guys to get done and I’ll be rippin and dippen on my 2022 low rider S… I have the 9.5 risers the mid aggressive bend bars the thrashin perch clamps on my bike now. Love them and how they feel I’m 5’8 and it’s what’s most comfortable for me! Check out thrashins vid on bars guys if your not sure but everyone is different so whatever works best for you I also have some parts to still install derby cover billet lever shifter with tip linkage points cover and my p-54’s all by thrashin if they got a part my bikes got it all on there.
Hey Frankie, I appreciate your perspective. I’m 5’8” too and just got my 2022 FXLRS a couple of weeks ago. I don’t know about you but I’m experiencing numbness in my right hand after about 20 or 30 minutes or riding, not to mention some shoulder pain - both of which got me thinking that maybe some pullback risers might alleviate those issues. Also, what seat are you using? I’m concerned I may have ordered a seat (before I even had the bike) that will exacerbate the problem - the Whiplash Speed Co. Slipstream, which I understand lowers and moves the rider back (maybe not ideal for a shorter dude) rather than, say, a Saddlemen Stepup, which I understand might raise the rider up and push him a little forward. Guess I’ll find out soon enough on the Whiplash seat. Anyway, I welcome your thoughts or anyone else’s on risers, bars, and seats.
@@davidh.2477 yep I get it in both after a few mins of riding also I changed grips and that helped a bit but not by much I have heard of softer grips or grip busters but have not tried them also maybe some different gloves 🧤 but don’t wanna feel like you have a pillow in your hand cause you definitely wanna make sure we have that hand to grip contact. It’s just one of those things I thought 💭 my risers oils help cause they are pull backs but again it did not help that much just put me in a more comfortable riding position.
@@frankiechavezio3857 That's sucks that you get it in both hands. I had never experienced that with another bike -- not with the Road King I traded in for the LRS, nor with my Bonnie T120. I'm thinking maybe it's just the higher bar position that I'm not really used to. Even with the stock riser, my hands are raised up and more level with my shoulders, whereas with the other bikes it's a more relaxed and less aggressive posture, with my hands down well below my shoulders. Maybe we got bad circulation?? Or maybe it's more common than we know? Anyway, curious to know what seat you're on. Ride safe, thanks bro
Awesome!!!!! Will this be able to ship to dumb ass COMMYFORNIA????
Didn't really give the stock one much time 😕
Why does the pipe aim up in the air? Lol
Cause I made what I wanted to make. Lol
@@THRASHIN
Ok tough guy 😂
i will better stuck with the original being not a bogan! ...here in germany we get lots of problems with loud pipes.
Typical sewing machine sound with stock exhaust LMAO. 2 into 1 is the way grasshopper!
Agreed
Will this exhaust work with passenger pegs?
Yes it will 👍🏻