DIY LEGO Brick Sorter | I Like To Make Stuff
Вставка
- Опубліковано 25 сер 2024
- I prototyped a LEGO Brick Sorter out of plywood, laser-cut acrylic, and some 3d printed parts. This will be a part of a larger LEGO table I'm building in the future, but this mechanism is so cool, come check it out! Check out the Maker Alliance at ilt.ms/join
Subscribe: bit.ly/ILikeToM...
Second Channel: bit.ly/iltms-2
Check out my TopVideos!: bit.ly/ILikeToM...
Petesquared Lego Sorter Video: • Lego Sorter V2.0 (sort...
Get digital plans, cool merch, and indepth articles at
iliketomakestu...
Learn 3d modeling in Fusion 360 with our online course:
www.fusion360f...
TOOLS & SUPPLIES WE USED(affiliate links):
kit.co/iliketo...
kit.co/iliketo...
Want to support ILTMS? The Maker Alliance gets exclusive content and more...
www.iliketomake...
FOLLOW:
/ iliketomakestuff
/ iliketomakestuf
/ iltms
MUSIC: share.epidemics...
#diy #ILikeToMakeStuff #LEGO
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
DIY LEGO Brick Sorter | I Like To Make Stuff
• DIY LEGO Brick Sorter ...
I Like To Make Stuff
/ iliketomakestuff
I think we need one that is like a centrifuge. Have it pulse on and off. This video gets the thoughts going...
That'd be cool
Omg industrial level lego sorter
I thought that too! Maybe to stay with the vertical bin style, maybe you could have them slide back and forth linearly that way the sorter wouldn't need as much hands on sifting. Either a linear actuator to push/pull the sieves or a dc motor converting to linear motion like a piston and crankshaft. Or an old palm sander on the back to give a good vibration!
@@uhlenbrock15 or even the simple Version with a DC-Motor and a Zylinder thats mounted a bit off the center.
This comment is why I love iltms fans!
The only thing about mounting it on the side of a table is, it will be really hard for the pieces to fall through on their own. You need some sort of agitation to shake them up and get them to fall, otherwise they just stack on top of each other and stay at the top.
when he said that it is going to be atached to a table, i thought he would suspend it with rope, so that the whole thing can be shaked easiliy by hand, that would be my advice.
I had the same thought. Maybe if it were mounted on a short track it could slide side-to-side? Or pivot about the bottom chute?
Love this prototype, I need one badly!
Step bits work great on drilling acrylic too because they don't pull the material up. Now making something to sort them by color!
People have built those using lego and camera vision and AI
watch?v=04JkdHEX3Yk
oh never sort by color, shape and function is the only way
@@Px4164 depends on if you’re building for function or for art. I’d never sort by color, but I can see why someone might.
I don't see the point of this at all - now your lego is sorted in big pieces, medium pieces, and small pieces?? WTF good does that do??
I agree. Step bits work great in plastics.
I love how UA-cam creators leave random questions that they don't really need the answer to but makes people make comments for the algorithm. Nice try Lego Man. Not going to trick me into making a comment. But nice videos. I love the idea of Fusion videos to help people learn to use it. I use my 3d printer for great things. I know the common misconception is still that 3d printers are for figurines only. I love when people get to see practical uses. I often think about wanting to show people how to design for practical, household uses. It is channels like this that help people realize they CAN do it themselves. Not relevant, but I have been watching your channel for years.
But... You commented 😅
@@caleba.robinson8451 that was the joke. Besides just an excuse to make any random comment that is not relevant but helps their channel for the UA-cam algorithm.
Thank you for showing failures during prototyping. It helps to show the learning process.
Bob, you need to get yourself some plexi point drill bits. They are bits specifically made to drill acrylic, poly carbonate, and other plastics so they don't crack, chip, or chunk out on the back side. They will save you so much time, headache, and frustration when drilling plastics.
When drilling acrylic like that, try peck drilling. Just continue to raise/lower the drill. I’ve had better luck with that not lifting/cracking the material. Nice build Bob - need an offset motor or orbital sander to vibrate the parts through so you can just load/sort unattended :-)
This is the same idea behind how grains of sand are separated for measurement in sand casting applications. There is a stack of nesting trays with finer and finer meshes and the tower sits on a vibratory base to shake the entire thing. Each tray has a calibrated weight and it allows you to measure the sand's grain size distribution.
I saw you shake the box, maybe think about adding an out of balance motor to vibrate the box?
And also shake grader for potatoes
Its how you can buy pea gravel, which doesn't occur naturally in nature without being mixed with bigger stuff.
Yep, this is a pretty commonplace application in many industrial processes. I studied sieves when I took a Chemical Engineering course at uni!
Instead of painting white, you should look into the really nice finish Alexander Chappel often uses. It has white pigment and mostly combats any yellowing or off colors, but multiple coats will nicely lighten the wood while keeping the grain and everything. It always looks incredible! Definitely worth a look, especially if you’re interested in keeping the cool natural and synthetic look together. I personally love natural wood and synthetic or metal together… usually with odd unnatural color stains to bring the wood to a bit more synthetic look while keeping the natural grain. I like grey and pale white stains combined with iron or steel. That’s my personal favorite.
Thanks for the mention Bob! Appreciate it :) Been a big fan of yours for a long time.
Hey Pete!! Thanks so much for the inspiration!
I feel like there is a joke about putting a square brick in a round hole missing somewhere...
And maybe some internal screaming from Giaco watching Bob use that screw driver instead of one he doesnt need lol
I had the exact size of this bin 0:30 but it was 3/4 full of only Technic pieces. It took me at least 15 hours spread across two days to sort 120 different technic pieces into 13x5 cm boxes. Totally worth it! There's still a couple of hours of work left but I don't have another sorting cabinett.
Nice! My thought like a “vortex dust collection system”. Attach a shop vac to a bucket that has trays that lift out. Fast clean up by sucking them up and sorting the pieces.
Bob this is amazing I NEED THIS!!
Excellent!
Brick science??
Great contraption for smaller piles of LEGO's, but if you have to sift a whole bucket load of bricks then maybe you could make the sorter out of three stackable plastic containers with three different sized holes drilled in the bottoms?
What you need is a bin that feeds a conveyor which carries the pieces under a camera. A small pick and place arm can then sort the pieces based on size, shape, and color. It would also be useful to sort screws, bolts, nuts, and general hardware
If you're mounting it to the table, it will be harder to shake and get the pieces unblock.
Put a piano hinge on the french cleat when you mount it to the table. Then put a vibration motor to the back with a battery or USB power supply to vibrate the whole thing. That might dramatically imrprove the effectiveness?
I love the casual Millenium Falcon sitting under the Lego table 🤣 awesome video as always! Going to try and make this for my niece!
One thing i'd suggest is mounting a funnel up top, kind of how woodchippers have so that when parts are swept off the table, they dont risk falling off the other sides. The other upgrade i could suggest is a sliding "plate" so that you can shake pieces through without having to take it off the table mount, however it would cause issues with the pivoting system (so maybe replace the pivot entirely with a longer slide plate that you can just remove when the parts are sorted how you had on the cardboard prototype)
Re-purpose a dresser and then you’d get the different sizes by pulling out the drawers and it would be storage!
this is a really excellent idea
They make drill bits for acrylic. The angle on the end is sharper and they work great.
I've been contemplating building a lego sorter as well. But I thought about adding some sort of plug in device that would vibrate and help sift the pieces. Maybe cannibalize one of those cheap hand held back massagers?
Hi I'm Mike & I like to watch Bob make Stuff! Great video! I love Legos!
I used to work with injection moulding machinery. And some of the moulds we used produced multiple parts.the simple devices we used to sort them were two long contra rotating rollers placed on a slight downward slope and spaced further apart at the bottom of the slope then the top.we then just placed boxes under the rollers to catch the parts. Maybe an idea for a version 2.0?
That sounds so simple yet genius.
Have you considered adding a bracket on the back or side for your sander to vibrate the contents down? Alternatively, an old computer fan with a nut / bolt through one of the blades makes for a nice vibration source. Interesting video presentation, thanks for sharing this. Wishing you and your family a blessed week. Cheers
Id suggest mounting it to the side of your desk/table with a simple drawer slide, or even just a 3d printed dovetail rail. Then you could shake the bucket without having to pick it up...etc.
"did you say le-go, my leg-o?" -Keith Morrison.
I think it might be beneficial to make the whole design wider. That way you can still have the same slim design at the side of a table but you can physically spread the pieces at the top layer across a wider surface area to diminish the bottlenecking.
Rage slam that dry erase marker!!
But yeah, I think the large stacked trays, mounted on a shaker, might be the way to go. Still, trying this helped us learn that, so ... win!
And that orange acrylic is noice.
Yeah, I was thinking a shaker, and/or you work in a slant into the sieves so that the bricks flow to individual chutes. That way it would be a continuous flow rather than a batch process. You can draw on the aggregate sorting processes in concrete production for ideas.
Layout and drill the sorting holes in the bottom of nesting storage containers. Then add supports to the inside corners of the lower containers to increase volume. My inspiration from litter box sifter.
The gorilla tape to remove the acrylic backing is a fantastic trick. Thanks!
I've seen something similar on UA-cam for those of us who lack chopsaws, 3-D printers and table saws. Five plastics storage containers are stacked, with the holes drilled in the bottom of each of the top 4 bins.
I really appreciate that you left the error in the final edit
Try steep angle diagonal sorting plates that dump left and right alternatively. You might have to adjust your hole size a little but it should be a bit more simplistic for sorting and agitating the pieces. It might even be a bit more fun to watch, you could even make V shaped sorts for a bit more sorting area.
If you run your drill in reverse at the end of your hole you can melt thru the final portion and your piece won't pull up. A 0 rake drill bill is also a good option.
Use a scrap of wood to apply hold down pressure right next to the drill bit when you drill the acrylic, while still keeping your fingers away.
Bob does it again! Another amazing build
Now Bob, show us the best way to STORE sorted Lego. I've seen lots of ideas, but in the end? IMPOSSIBLE. We were up to over 100+ bins of various types (Plano boxes for small buttons, etc., Akro-Mills plastic bins for larger parts, etc.). Yea, just no solid way of doing it. We're at over 50K lego pieces at our house...probably closer to 75K by now, so we have parts EVERY WHERE....LOL
Next week ;)
My collection is probably similar to yours in size. You're right, there's a million ways to approach storage! I have 8-tray Really Useful Boxes towers (on casters), with their 15-compartment scrapbooking dividers in each tray, combined with Bass Pro brand tackle boxes for the small things and minifigs. Other people (like the Bricklink sellers) go all in on Akro-Mills.
That gorilla tape technique with the protective layer is amazing. Never thought of doing that
Eeeehm Bob, why didn’t you just make slots to slide in the front, rather than using screws, that way you could slide it up and grap in easily when something gets stuck ...
The reason it took so long to dry was because it was gloss paint. Use matte paint and gloss clear coat if you want it to be shiny. Clear coat takes way less time to dry than gloss paint, and matte paint also dries really quick.
Regarding your curiosity of if it would do what I need it to do, I think not, because I don't really use bricks. Most of the pieces I use are like, bars and gears and fasteners. I suppose it might do a pretty good job splitting the tiny fasteners from the larger components, but for stuff like those 1x15 technic bars I think it would fare quite poorly, as those have the potential to slip through all but the smallest size and also the potential to get caught at the largest size
Very cool build though!
A hopper at the top might help with casually throwing stuff in. The biggest issue I can see is that shaking was needed to encourage the pieces to go through the sorter, which is not something that can be done easily when its mounted on a table
To shake the sieve on the side of the table, you could mount it using a drawer slide with a limited throw. That way you can pull it side to side and sort what gets caught on top. Great video Bob!
i was literally about to say the same thing! drawer slide and all haha
@11:13 If you uses the drill-press in reverse or counter clock, it won't grab the acrylic it in the end...
perhaps complicating it a bit more than you might like...but what about something to maybe...agitate the whole thing about? like, mount it on a limited pivot that would allow it to be shaken back and forth just enough to get the pieces moving. Heck, add an eccentric cam or something so you could just turn a crank to do it lol
This is so cool! I think you may need a way to shake this thing back and forth so the lego can get agitated and sifted. My non-maker simple solution: use those drawer rails you used in your pantry. Put them horizontally and use a door knob on either side to shake it? It won't look as good as it does now tho.
Me watching an in depth guide/showcase of an incredibly design gadget for a very specific problem I will never have
It needs a vibratory or air mechanism to aid in sorting thru the holes.
In 2005 my father actually built a very similar lego sorting system using the same concept
Air jets blowing from the side. Multiple jet velocities. Drop Legos from above. The lighter pieces will be pushed to the other side by the wimpiest jet. The somewhat larger pieces will be blown to the other side by the somewhat more powerful jet. On and on. Only the largest and heaviest pieces make it all the way to the bottom.
Wouldn't placing the different layers at an angle be more practical, so gravity will help to create a flow (maybe with doors on the side, so don't need to rotate?). Would make the whole thing taller though..)
A cool storage bin idea could take inspiration from a lazy susan. Your LEGO sorting device could sit above it, meaning you would just have to rotate the bins underneath too the size you need...
If you placed the sorting meshes at a (slight) angle, then pieces that didn't go through would slide down and could be funneled out, so there would be no need to stop, change bin, and drop the stragglers on each level.
Whaaaat?!? I've needed this in my life and have been asking you for this on our hang outs for a few years now! 😂
Great project! Rather than screw the plex in, dado a slot and slide a piece in?
How have I not seen any of his videos before? I am subscribed to multiple engineering channels but not seen this one until a lego video is out. Anyways, I would have tried to implement a way to shake the legos to further sift them out. You can do it by hand, so it wont be needed to have a power source.
I always add a thin trim over the acrylic, as I would for a window screen or glass pane mounted onto a wooden frame. It offers safer installation and stronger finished product. I enjoyed the project. Thanks for sharing it.
You should have used an auger with small holes at the input and larger at the output, the rotation will separate out the pieces and fall through to different containers below (sort of like a gold mining trommel )
Quick Tip for acrylic drill a pilot hole. Reverse your drill with the hole size you want and melt the plastic instead of drilling it. And cooling with water always helps!
Would be cool to add like a rumble pack from an old video game controller to help move the pieces along. Could put the sifter on some rails and then the rumble pack/shaker can move up and down to jostle the pieces through the holes better.
So, really this video is all about knolling? NEW ON SCREEN TITLE!!! "They see me knolling!" 🤠🤠❤❤🤣🤣
I think adding a small motor with an offset rotation on spindle to make it vibrate would make it easier too; you could flip a switch and it would jostle the pieces through without manually shaking the whole container.
Much smaller holes and this one would be perfect to sort out beads! :) 💜 that´s something a lot of us beaders could have use for, don´t know how many times I´ve gotten my beads messed up....
Finally something that fits my needs exactly.
You could make the pivot way easier. You could extend a rectangular shape on both sides of you your laser cut piece. And drill the hole in the same size like the width of the rectangle
Hey, make a small DIY wind turbine. Ask "Engineering with Rosie" UA-cam channel which general design to choose for a small turbine for your rooftop, and common caveats and what to avoid. It would be great to see something like this being built from scratch.
Interesting, useful, environmentally friendly!
I love the subtle Lego astronaut tee shirt
Why is this video so good?
You could also align this with the entire back edge of the table to make more room for more Legos! You could put a support under (one side of) the individual rotating filters to support the weight of tye increased number of Legos
I find sorting Lego by hand a lot quicker and very relaxing.
I just sit down with a coffee and go for it.
Neat idea to have it mount on the end of the table. Also a solid choice to paint it white to make the orange pop
One change I would like to try if I were making one would to make the top area a bit deeper so that you can give it a good shake with less risk of spillage. Great project as always, really got my creative juices flowing.
small tip for the drilling acrylic part :D we use a piece of wood with a big hole that the drill head can pass but to hold down the acrylic way better so it doesnt tend to lift and bite /crack
I would have put each layer at an angle long ways with a tray at the side and make the entire thing vibrate. The thing would sort and put into separate containers. Just my 2cents. Great videos and definitely gets me thinking of things I want to start making.
If you've never seen him, you need to check out the Akiyuki Brick Channel. He does mindblowing Lego contraptions, including automated brick sorters. I think his stuff is right up your alley.
you could angle the filters for a longer filter area in the same cross section. ~40% more area at 45degrees
The finger on the Glowforge is the best.
lol your lego bins look like our lego bins - we have stacks of them all jumbled up. This is great.
Love the video. Was wondering if it would work better as a mini dresser, with each drawer having a sifter as the base? That would also store them in the same place.
I guess it's not so good if you have a lot of pieces.
I'm here for the lego videos!!!
I wonder if you could soft/spring mount it to the table and then mount a vibration motor to the back. When things start to get clogged, or not fall through, you could flip a switch and jiggle it loose.
A rumble pack for V2 would be cool and help with sifting.
Put a drawer pull behind it and attach the table so that way you can shake it horizontally to get the smaller pieces that bottleneck to fall.
You could cut a dado on the sides of the box to slide the acrylic front instead of screwing it.
You could have drilled the plexiglass before cutting it to shape, would have been less critical from being close to edges
Love the prototyping!
Using a barrel spinner design might work as well. Like the type used for separating rock and gravel.
This is awesome! 🔥
I wonder if a person could build a table around the bigger design. So it functions as a table, and a sorter with a large sort area?
Hmm, my comment was automatically deleted? O.o
My only suggestion would be add a shaker function. Where after a button press, it turns on an electric motor for X-seconds. Three 'fins' on a rotor that moves a dowel/pin up and down within an oval hole with a protective casing around it all. To shake it around a bit. And cut the backside down a bit for a raised edge. To better sort things.
Y'all need to make that joking satisfying peel into a short. That's gold. 😂
That’s actually really awesome
You could probably automate it to sort by color as well with a few design changes and one of the Mindstorms kits with a Color Sensor.
I have been waiting for this my whole child hood
You should try a sifter with different sized slots to sort the long skinnies from the chunkys
Super cool and doable!
Thank you for sharing!
Great project! One thing to consider would be to add a through rod with some stuff bristles maybe above first plate, that way you could turn it and coerce pieces through the first major bottleneck. You could do it at each layer (or connect them with a belt to they all run at the same time.. automated), but the first one is probably the most helpful.
Nice wall in the background! Hope you can also bring that to better use for future.
I like the idea that someone else mentioned about vibrating the sorting machine. You could use a small motor with an eccentric weight on the motor shaft to introduce the vibration. I like the way you think, Bob.
On the top filtering tray, the holes on the border of the sides are basically half-size? Wouldn't it be better to do 3 rows of full size big hole, rather than half size, full, full, half so no medium piece gets stuck on that first tray?