I definitely love that you've aimed this at hobbyists and recommend going cheap on equipment to start, helps give those entry level people confidence that they will be fine to start off with basic equipment instead of worrying about getting more expensive stuff.
I have been thinking of learning how to repair boards since seeing Louis Rossmann repairing them with a 2p capacitor and that's all it needed. Now I've seen your playlist and having watched some of your reviews I will be watching intently. Thank you for posting them.
Not certain about the points made but ,if anyone else trying to find out electronics board repair try Saankramer Electronic Magazine System (do a google search ) ? Ive heard some interesting things about it and my colleague got excellent results with it.
interesting points ,if anyone else needs to find out about pcb repairing try Saankramer Electronic Magazine System (do a search on google ) ? Ive heard some great things about it and my friend got excellent results with it.
I'm not sure but ,if anyone else wants to discover how to repair multimeter try Saankramer Electronic Magazine System ( search on google ) ? Ive heard some interesting things about it and my work buddy got excellent results with it.
I've been watching your videos for a few weeks now but have decided to start at the beginning as my new soldering station has arrived in the country from wish. Happy new year to me, but more importantly, thank God there are people out there so very generous with their time and knowledge. Thank you.
I'm one second into this video and I must stop to commend you on your absolutely gorgeous wall decorations. If I wasn't in a wheelchair I would be replicating that fantastic room decor myself in my room.
I'm only 5 minutes in, and wow! I can't wait to check out more of your channel. And THANK YOU for truly starting with an introduction on budget equipment and scope of the video series... I've done very basic soldering and repairs for years, but always been more of a software guy, looking to learn more hardware repairs and understanding. Ok, onto the rest of the video!
Now that I will have all the necessary equipment (including an analog oscilloscope, for more learning) I will get a damaged or non starting powerbook board, so I can go along with you in all the basics more easily. I have an accessory question, if you don't mind : what can be written for a sensing current resistor, on the board ? (should it be written Rcs every time or most often) . I did see Louis Rossman using a software that links the schematics with the board layout (but it seem to be somewhat expensive, not really possible for my level of learning ;) ) Best regards
In 10 minutes, and after 36 years in IT, I learned how to see what that inflated capacitor is doing (or not doing) in that old ASUS motherboard that went belly up last week... Good enough for me to subscribe.
hey ,if anyone else is searching for electronic repair kit try Saankramer Electronic Magazine System (do a google search ) ? Ive heard some pretty good things about it and my colleague got cool success with it.
hi everyone ,if anyone else wants to learn about how to repair a car try Saankramer Electronic Magazine System ( search on google ) ? Ive heard some incredible things about it and my mate got amazing success with it.
hi everyone ,if anyone else needs to find out about electronics equipment repair course try Saankramer Electronic Magazine System (do a search on google ) ? Ive heard some awesome things about it and my mate got amazing success with it.
interesting points ,if anyone else wants to discover cell phone repair stores try Saankramer Electronic Magazine System (should be on google have a look ) ? Ive heard some decent things about it and my mate got cool results with it.
interesting points ,if anyone else wants to learn about repair guides try Saankramer Electronic Magazine System (Have a quick look on google cant remember the place now ) ? Ive heard some pretty good things about it and my partner got cool results with it.
Get a good soldering iron. Critical. I thought I was terrible at soldering until I bought a real one. Hakko 888d is $60-80 and I still use it and have several irons now. The $20 eBay special (2 of them) flat out didn’t work
thank you for your video. this is really good for a beginner like me. i would recommend to all of my friends for the efforts you put in on this. amazing!!! greetings from India.
hey ,if anyone else wants to discover flat screen tv repair try Saankramer Electronic Magazine System (do a search on google ) ? Ive heard some great things about it and my partner got excellent success with it.
HELLO ADAMENT! Am an avid Subscriber, you are my first 'Go to' when diagnosing PC issues! I recently built a new Computer in my old Tower with an MSI Z390-A PRO Motherboard with an Intel Pentium Gold Processor G5400 CPU @ 3.7GHz! Next added 64.0 GB DDR4 3200 Ram! Also a ZOTAC GAMING GeForce GTX 1 Video Card! Recently upgraded all my HHD's with an Intel 660p Series M.2 1 TB SSD Drive C and two WD I TB internal SSD's! My Computer now boots up completely for a cold start in 30 seconds!!!! (Once in a while when I turn it on, it Boots into the Bios Screen)!!!(But when I wont to boot into Bios, no matter what key combination I press it wont go into Bios on Command)! Windows will not display on my Digital Monitor but I can see the Bios Screen on another HDMI Output to my 32 inch TV! Am running XMP Mode and Gaming Mode on the MSI along with allocating 3/4 of my Ram to Process my Adobe Premiere 2022! My Question is: How do I get the computer to Boot into Windows EVERY TIME? And secondly, How do I get my computer to boot into Bios on command?
Hello. Im homeless and im dreaming to learn this and feel pride once again. I have 0 funds and didn't know where to start. All i do have is time. I hope this video can help me to get going.
interesting points ,if anyone else wants to uncover electronic board repair try Saankramer Electronic Magazine System (just google it ) ? Ive heard some interesting things about it and my friend got excellent success with it.
hey ,if anyone else is searching for how to phone repair try Saankramer Electronic Magazine System (do a google search ) ? Ive heard some decent things about it and my co-worker got excellent results with it.
interesting points ,if anyone else needs to find out about computer repair tips try Saankramer Electronic Magazine System (Have a quick look on google cant remember the place now ) ? Ive heard some incredible things about it and my co-worker got great success with it.
interesting points ,if anyone else wants to learn about electronics repair training try Saankramer Electronic Magazine System (just google it ) ? Ive heard some awesome things about it and my work buddy got cool success with it.
hi everyone ,if anyone else wants to learn about electronic card repair try Saankramer Electronic Magazine System (should be on google have a look ) ? Ive heard some amazing things about it and my brother in law got excellent success with it.
@AdamantIT wonderful content. I have a m-atx Mobo (MSI k9agm4) which seems to have a short. I have checked and all surface mount caps close to cpu socket are shorted. CPU is not installed and also RAM is not installed. This Mobo is outdated but would be a great learning experience. Please advise me where to start, I'll get you more details if required.👍
I do professional board repair everyday when it comes to soldering irons you don't get more with more expensive ones. The important thing is to get a t12 cartridge style tip that has the heating element in the tip, not the old fashioned ceramic heating element that the tip sits around. There's tons of knock offs that can be had for as little as 20-30 bones. I have a hakko but I almost never use it and use my knock off t12 i got for 25 dollars on amazon. Also for board repair 2 soldering irons is much more valuable than 1 valuable one. It makes removing smd components very easy like smd resistors and leds. A good iron stand that preferably has a spot for brass shavings and a sponge is also a good investment. I don't use my hakko station much at all but I do use the stand.
I'm more passionate about this these types of things as a career rather than other things, which makes me wonder if I even need to go to college to learn all these things.
The problem is that there aren't really any schools that teach this kind of work. Everyone I know who does it is either self-taught, or has an electronics engineering background for product design/testing. I'm self-taught, and you can get pretty far just by watching others, learning, and practising - but the catch is that I have a lot of gaps in my knowledge for EE theory. When you get into the maths of how to calculate component values and stuff, I get left behind big time. Ohm's law is about my limit 😅
Tv repair men didnt have these schematics back in the 80s and 90s yet they still managed to fix the tv / vcr without a schematic. Heck even today we have repair men that dont use schematics to find a bad component.
Hi Adam You mentioned that Apple service diagrams are available if you know where to look. Could I have a link for my mid 2011 iMac i7 27" please. I have looked and looked. Thanks Adam
I'm not sure but ,if anyone else wants to learn about electronics repair manual try Saankramer Electronic Magazine System (just google it ) ? Ive heard some unbelievable things about it and my mate got excellent success with it.
I am a Field Technician In Texas and do Breakfix for computers, I have a Fascination for Electronics and will like to learn how to Soldier to acquire this skill set and eventually work as A Component level repair fixing motherboards. I have acquire the following to start, Kotto Extractor, Kotto Solder Sucker, Silicone Soldering mat, QuadHands Deluxe helping hands, SRA Flux Pen, Tip Tinner from Thermaltronics, No clean Wick, Rosin Core Solder SN 63 pb37 0.8mm, HAkko FX-888D . Which Fluke Multimeter do you Recommend or other items i might need? I was checking out the Fluke 101, 107 and even 117 but have no idea. Sincerely Irvin Thanks
Hi, thank you for your tutorials. I need help with hp proone 400 g2 touch that has no power. I changed adaptor and even applied 19.5 from bench power supply but draws no current. I assume that indicate no short circuit on the board, but does not power up. I have reset the CMOS battery , but also didn't help. NO led light is on once you plug power in or when you press power button. Any idea what is it? Very much appreciated.
hey ,if anyone else wants to learn about electronics repair forum try Saankramer Electronic Magazine System (do a search on google ) ? Ive heard some pretty good things about it and my buddy got cool success with it.
On two occasions, in the video, the physical board is held up to compare to the board-view on the screen... Both times, the board is held upside down compared to the image. Just an observation. ;-]
Hello, I have a problem with a laptop lcd/led port on an Acer AN515-42 laptop that has been partially burnt out this is after I installed a replacement lcd cable. I do have a picture or so. What do you charge? Could you fix something like this at all?
hi mate .. i m a big fan of you . i watch you for long time and got here a few motherboard's with big problems but i would like try sort them out or just get a bit into it !! coud you tell me please what your heath gun model and name please ??? thank you big like
interesting points ,if anyone else wants to discover electronic appliance repair try Saankramer Electronic Magazine System (just google it ) ? Ive heard some great things about it and my brother in law got amazing success with it.
Hi. You sound like you know a lot about a PCs. I have a Motherboard with no Manual for it and it's not available on line. My header has 10 Pins unmarked. Can you please tell us how to identify Front panel Pins using Multimeter or any other technic without damaging the board. Thank you.
Hello, I have no experience in board repair at all. I know the basics of what makes up the board. How long will it take me to become a good technician?
It would be nice if someone, other then in Hindi, would produce a 1,2,3,4,5, on desktop motherboard trouble shooting from the plugs clear to repair on a dead motherboard. Checking here you should get, and if you don't then do this, and or this...... It would be nice to be able to get a schematic or have one shown for the board being worked on to help learn. I have tried for weeks to get a schematic for a 100 to 200 series gigabyte board, but they will not sell and online I have only gotten viruses. Thanks
Hi mate can you talk about ground where it goes to (ground duh) but not always! In a laptop it usually goes back to a metallic part of the chassis but doesn't that mean you could get a shock. I have a gap in my understanding
This is actually an interesting topic... I'll see if I can do a talking-head on this one at some point to cover the basics as best I can. The short version is: Theoretically, 0v is ground. But if the device is on a fully-isolated power supply, the device's 0v rail might not connect to the earth pin of the plug. This is called Floating, it's 0v relative to the power rail of the device, but because it's not directly connected to earth, there might be a potential difference (voltage) between 0v and Earth due to static, charges in the air, etc. This is why some laptops (infamously macbooks) can give you a faint tingle when on-charge, because you're touching the Device Ground (0v) and Earth, and sensing the potential difference between the two. This potential should never be enough to actually give a shock, but it's hard to go into detail there without real-life examples.
@@Adamant_IT thanks for the explanation man I'm working through your board basics at the moment, not far in yet but from what I'm seeing it's very well presented. I've done basic repairs but never component level, it's satisfying to bring something back to life, so here I am! Basic electrical knowledge and fault finding with a multimeter would be a good video IMO. Cheers
Your tutorials really make me feel like I've wasted the last decade of my life at school, you definitely are better at teaching than my professors are
What a statement! Wow! That's awesome.
May be you were a bad student ?
I definitely love that you've aimed this at hobbyists and recommend going cheap on equipment to start, helps give those entry level people confidence that they will be fine to start off with basic equipment instead of worrying about getting more expensive stuff.
I have been thinking of learning how to repair boards since seeing Louis Rossmann repairing them with a 2p capacitor and that's all it needed. Now I've seen your playlist and having watched some of your reviews I will be watching intently. Thank you for posting them.
Not certain about the points made but ,if anyone else trying to find out
electronics board repair
try Saankramer Electronic Magazine System (do a google search ) ? Ive heard some interesting things about it and my colleague got excellent results with it.
interesting points ,if anyone else needs to find out about
pcb repairing
try Saankramer Electronic Magazine System (do a search on google ) ? Ive heard some great things about it and my friend got excellent results with it.
I'm not sure but ,if anyone else wants to discover
how to repair multimeter
try Saankramer Electronic Magazine System ( search on google ) ? Ive heard some interesting things about it and my work buddy got excellent results with it.
I've been watching your videos for a few weeks now but have decided to start at the beginning as my new soldering station has arrived in the country from wish. Happy new year to me, but more importantly, thank God there are people out there so very generous with their time and knowledge. Thank you.
I'm one second into this video and I must stop to commend you on your absolutely gorgeous wall decorations. If I wasn't in a wheelchair I would be replicating that fantastic room decor myself in my room.
This guy is an amazing teacher, this is the first video I’ve come across and I can already tell I’m gonna learn so much
I'm really glad to have found this series and your channel! Thank you for all your effort and explanations, you are a great teacher.
Thank u sir for sharing this, especially for us that dont have enough time or funds to train.
I'm only 5 minutes in, and wow! I can't wait to check out more of your channel. And THANK YOU for truly starting with an introduction on budget equipment and scope of the video series... I've done very basic soldering and repairs for years, but always been more of a software guy, looking to learn more hardware repairs and understanding. Ok, onto the rest of the video!
Now that I will have all the necessary equipment (including an analog oscilloscope, for more learning) I will get a damaged or non starting powerbook board, so I can go along with you in all the basics more easily. I have an accessory question, if you don't mind : what can be written for a sensing current resistor, on the board ? (should it be written Rcs every time or most often) . I did see Louis Rossman using a software that links the schematics with the board layout (but it seem to be somewhat expensive, not really possible for my level of learning ;) ) Best regards
In 10 minutes, and after 36 years in IT, I learned how to see what that inflated capacitor is doing (or not doing) in that old ASUS motherboard that went belly up last week...
Good enough for me to subscribe.
hey ,if anyone else is searching for
electronic repair kit
try Saankramer Electronic Magazine System (do a google search ) ? Ive heard some pretty good things about it and my colleague got cool success with it.
hi everyone ,if anyone else wants to learn about
how to repair a car
try Saankramer Electronic Magazine System ( search on google ) ? Ive heard some incredible things about it and my mate got amazing success with it.
hi everyone ,if anyone else needs to find out about
electronics equipment repair course
try Saankramer Electronic Magazine System (do a search on google ) ? Ive heard some awesome things about it and my mate got amazing success with it.
interesting points ,if anyone else wants to discover
cell phone repair stores
try Saankramer Electronic Magazine System (should be on google have a look ) ? Ive heard some decent things about it and my mate got cool results with it.
interesting points ,if anyone else wants to learn about
repair guides
try Saankramer Electronic Magazine System (Have a quick look on google cant remember the place now ) ? Ive heard some pretty good things about it and my partner got cool results with it.
Get a good soldering iron. Critical. I thought I was terrible at soldering until I bought a real one. Hakko 888d is $60-80 and I still use it and have several irons now. The $20 eBay special (2 of them) flat out didn’t work
thank you for your video. this is really good for a beginner like me. i would recommend to all of my friends for the efforts you put in on this. amazing!!! greetings from India.
Love your channel. So informative for an Amature as myself.
Many thanks for the great work!
hey ,if anyone else wants to discover
flat screen tv repair
try Saankramer Electronic Magazine System (do a search on google ) ? Ive heard some great things about it and my partner got excellent success with it.
HELLO ADAMENT! Am an avid Subscriber, you are my first 'Go to' when diagnosing PC issues! I recently built a new Computer in my old Tower with an MSI Z390-A PRO Motherboard with an Intel Pentium Gold Processor G5400 CPU @ 3.7GHz! Next added 64.0 GB DDR4 3200 Ram! Also a ZOTAC GAMING GeForce GTX 1 Video Card! Recently upgraded all my HHD's with an Intel 660p Series M.2 1 TB SSD Drive C and two WD I TB internal SSD's! My Computer now boots up completely for a cold start in 30 seconds!!!! (Once in a while when I turn it on, it Boots into the Bios Screen)!!!(But when I wont to boot into Bios, no matter what key combination I press it wont go into Bios on Command)! Windows will not display on my Digital Monitor but I can see the Bios Screen on another HDMI Output to my 32 inch TV! Am running XMP Mode and Gaming Mode on the MSI along with allocating 3/4 of my Ram to Process my Adobe Premiere 2022! My Question is: How do I get the computer to Boot into Windows EVERY TIME? And secondly, How do I get my computer to boot into Bios on command?
Thank you so much for this, I am really just dipping my toe into electronics and this is really what I need just to see if I have the aptitude. :)
Hello. Im homeless and im dreaming to learn this and feel pride once again.
I have 0 funds and didn't know where to start.
All i do have is time.
I hope this video can help me to get going.
The internet have all the knowledge that are you looking for! wishing you the best of success in your life path, greetings from Chile
@@FalconXtreme1 Thank you. I just finnished my micro solder practice kit and im making good progress. It looks very decent already.
Wish you the best bro
keep it up my bro nothing to be ashame of theres ups n downs that are part of Journey, refuel the eager to strive to only make better
@@Giorobot Thank you for your support. Awesome.
this is the first time I found this kind of teaching video on youtube. thank you for your kind sharing!
Congrats on the video!
Inspiring tips to start in-depth electronics studies.
interesting points ,if anyone else wants to uncover
electronic board repair
try Saankramer Electronic Magazine System (just google it ) ? Ive heard some interesting things about it and my friend got excellent success with it.
Hi adam can you make a brief video tutorial regarding on using multitester? Analog and digital. Please thank you 🙏
I am loving that intro tune. ❤
so much thanks for all the effort you put in this channel !
hey ,if anyone else is searching for
how to phone repair
try Saankramer Electronic Magazine System (do a google search ) ? Ive heard some decent things about it and my co-worker got excellent results with it.
Amazing, AMAZING WORK!!!
interesting points ,if anyone else needs to find out about
computer repair tips
try Saankramer Electronic Magazine System (Have a quick look on google cant remember the place now ) ? Ive heard some incredible things about it and my co-worker got great success with it.
interesting points ,if anyone else wants to learn about
electronics repair training
try Saankramer Electronic Magazine System (just google it ) ? Ive heard some awesome things about it and my work buddy got cool success with it.
hi everyone ,if anyone else wants to learn about
electronic card repair
try Saankramer Electronic Magazine System (should be on google have a look ) ? Ive heard some amazing things about it and my brother in law got excellent success with it.
Just by look at his wallpaper, I can already see that he is a man of culture as well
I love your videos. Thanks a lot for all this very useful information. You are an inspiration.
You are very generous with your knowledge. Thank you
you explain this in a very good way thank you very much
@AdamantIT wonderful content. I have a m-atx Mobo (MSI k9agm4) which seems to have a short. I have checked and all surface mount caps close to cpu socket are shorted. CPU is not installed and also RAM is not installed. This Mobo is outdated but would be a great learning experience. Please advise me where to start, I'll get you more details if required.👍
I am loving these basics videos, thanks so much.
Concise and practical. Very nice.
If I'm not mistaken, the board you held up isn't a MBP but a White unibody MacBook (A1342) ... :)
liked the video for the motherboard art on the wall.
thank you so much brother your explanation make me interested with elictronic
this video is really a big help.... Thank you.
I do professional board repair everyday when it comes to soldering irons you don't get more with more expensive ones. The important thing is to get a t12 cartridge style tip that has the heating element in the tip, not the old fashioned ceramic heating element that the tip sits around. There's tons of knock offs that can be had for as little as 20-30 bones. I have a hakko but I almost never use it and use my knock off t12 i got for 25 dollars on amazon. Also for board repair 2 soldering irons is much more valuable than 1 valuable one. It makes removing smd components very easy like smd resistors and leds. A good iron stand that preferably has a spot for brass shavings and a sponge is also a good investment. I don't use my hakko station much at all but I do use the stand.
Waaaaoooo, I just joined the class am new here.in fact,this is a fantastic Lecturer 👌
Simple and awesome intro!
Loved it.
I want to learn more from you
I'm more passionate about this these types of things as a career rather than other things, which makes me wonder if I even need to go to college to learn all these things.
The problem is that there aren't really any schools that teach this kind of work. Everyone I know who does it is either self-taught, or has an electronics engineering background for product design/testing.
I'm self-taught, and you can get pretty far just by watching others, learning, and practising - but the catch is that I have a lot of gaps in my knowledge for EE theory. When you get into the maths of how to calculate component values and stuff, I get left behind big time. Ohm's law is about my limit 😅
Tv repair men didnt have these schematics back in the 80s and 90s yet they still managed to fix the tv / vcr without a schematic.
Heck even today we have repair men that dont use schematics to find a bad component.
Love your videos cause they are very informative, great stuff my new friend.
This video is very very rich, thank you very much, this is what i am looking for
Nice explanation for the beginners.thanks for video.
Congratulations and thank you for these amazing videos!
C7408 connects to Louis Rossmann's favourite circuit. PPBUS-G3H. As he constantly mentions about 100 times per video.
Most important rail ;)
what an amazing tutorial i ever got, please sir how could i get the schematics diagram?
Hi Adam
You mentioned that Apple service diagrams are available if you know where to look. Could I have a link for my mid 2011 iMac i7 27" please. I have looked and looked. Thanks Adam
me too I don't know where to find schematics
Epic tutorial, can you make the same with lcd led televisions?
thank you very much
I build pc's looking to update my skills abit, great content! Thanks
Your channel is really interesting. Keep up the good work.
Thank you for your tutorials, could you guys share where are you looking for the schematics?
Many thanks
I'm not sure but ,if anyone else wants to learn about
electronics repair manual
try Saankramer Electronic Magazine System (just google it ) ? Ive heard some unbelievable things about it and my mate got excellent success with it.
Do you have any recommendations on what type of flux and solder rod to buy?
God Bless UA-cam for this useful Tutorials, and Thank you very much sir for sharing your knowledge, you are a life saver.
And subscribed... Thanks for the information!
I'm just finding it hard getting past the merlin goatee
I am a Field Technician In Texas and do Breakfix for computers, I have a Fascination for Electronics and will like to learn how to Soldier to acquire this skill set and eventually
work as A Component level repair fixing motherboards. I have acquire the following to start, Kotto Extractor, Kotto Solder Sucker, Silicone Soldering mat, QuadHands Deluxe helping hands, SRA Flux Pen, Tip Tinner from Thermaltronics, No clean Wick, Rosin Core Solder SN 63 pb37 0.8mm, HAkko FX-888D . Which Fluke Multimeter do you Recommend or other items i might need?
I was checking out the Fluke 101, 107 and even 117 but have no idea. Sincerely Irvin Thanks
Hi, thank you for your tutorials. I need help with hp proone 400 g2 touch that has no power. I changed adaptor and even applied 19.5 from bench power supply but draws no current. I assume that indicate no short circuit on the board, but does not power up. I have reset the CMOS battery , but also didn't help. NO led light is on once you plug power in or when you press power button. Any idea what is it? Very much appreciated.
new subs here.. thanks for the video. more inspiring videos to come.
Nice information
Very well spoken video.
This Guy is one of the best man which i see here which give damn reallllly the best to learning fast and good . You Roxxx and big big THX !!!! :)
hey ,if anyone else wants to learn about
electronics repair forum
try Saankramer Electronic Magazine System (do a search on google ) ? Ive heard some pretty good things about it and my buddy got cool success with it.
Thank u very much for sharing pls do u have recommended books on how to test electronic components
On two occasions, in the video, the physical board is held up to compare to the board-view on the screen... Both times, the board is held upside down compared to the image. Just an observation. ;-]
Good video !
Anime background, yeah you are the man for me
Good introduction and great tutorials. Keep them coming . Thanks
I'm pretty sure I just picked up that same soldering station. Looks like a yihua unit
Amazing and interesting work👍
Thank you so much, which books can I look for If I want a good understanding of power system architecture of desktop, Laptop and smartphone pcb
Tks for advise & tips
Sir please where can i download these .brd files from.
Great video
Which camera have you fixed to the adjustable stand for magnification?
Hello, I have a problem with a laptop lcd/led port on an Acer AN515-42 laptop that has been partially burnt out this is after I installed a replacement lcd cable. I do have a picture or so. What do you charge? Could you fix something like this at all?
love this!
Very informative video! Thanks!
Thanks you so much for your wonderful video sir
hi mate .. i m a big fan of you . i watch you for long time and got here a few motherboard's with big problems but i would like try sort them out or just get a bit into it !! coud you tell me please what your heath gun model and name please ??? thank you big like
Cheers, in this series I had a WEP 2-in-1 station, these days I use and recommend the Quick 857dw+
Excellent thank you
I cannot thank you enough !!
May you tell me what is the best resources to learn laptop repair
cool intro music!
Excellent !!
am like freaking out for this
interesting points ,if anyone else wants to discover
electronic appliance repair
try Saankramer Electronic Magazine System (just google it ) ? Ive heard some great things about it and my brother in law got amazing success with it.
new subscriber here sir i have a motherboard no display i tried a lot of test but same
Awesome video
Great job, thank you
hi.i would to ash regarding your power suppy..were i can buy with the same one?i have mine but it does not give amps without shorting the test
probe
nice but i would like to learn more from you thank you
Thnx u for knowledge sir
Hi. You sound like you know a lot about a PCs. I have a Motherboard with no Manual for it and it's not available on line. My header has 10 Pins unmarked. Can you please tell us how to identify Front panel Pins using Multimeter or any other technic without damaging the board. Thank you.
Hi Adam, having downloded openboardviewer I can't get to find anything on the schematic PDF, what am I doing wrong?
Hello, I have no experience in board repair at all. I know the basics of what makes up the board. How long will it take me to become a good technician?
Self taught no school
thanks for the great intro! that Open Board View pgm, does it come with certain schematics? does it have a database? thank you again
It's just the reader. You'll need to find schematics on your own.
Adamant IT yes thank you again almost forgot - that round motherboard on the wall behind you, what was that from?
@@j.lietka9406 Everyone wants to know about the round one ;)
It's from an iMac G4!
Adamant IT cool! thanks
@@Adamant_IT I was wondering where on hearth you got it from :)
Hi
How get my get you to repair my CB2422 control box for my bed
It would be nice if someone, other then in Hindi, would produce a 1,2,3,4,5, on desktop motherboard trouble shooting from the plugs clear to repair on a dead motherboard. Checking here you should get, and if you don't then do this, and or this...... It would be nice to be able to get a schematic or have one shown for the board being worked on to help learn. I have tried for weeks to get a schematic for a 100 to 200 series gigabyte board, but they will not sell and online I have only gotten viruses. Thanks
Thought you were going to show us how a multi meter works, or anything else for that matter.
Is it the same for TV boards
Good basic 👍
Hi, I have a NVMe that needs repair. Possibly voltage regulator due to short. Can you do a repair of m.2 NVMe?
Not something I've looked into yet I'm afraid!
Hi mate can you talk about ground where it goes to (ground duh) but not always! In a laptop it usually goes back to a metallic part of the chassis but doesn't that mean you could get a shock. I have a gap in my understanding
This is actually an interesting topic... I'll see if I can do a talking-head on this one at some point to cover the basics as best I can. The short version is:
Theoretically, 0v is ground. But if the device is on a fully-isolated power supply, the device's 0v rail might not connect to the earth pin of the plug. This is called Floating, it's 0v relative to the power rail of the device, but because it's not directly connected to earth, there might be a potential difference (voltage) between 0v and Earth due to static, charges in the air, etc. This is why some laptops (infamously macbooks) can give you a faint tingle when on-charge, because you're touching the Device Ground (0v) and Earth, and sensing the potential difference between the two. This potential should never be enough to actually give a shock, but it's hard to go into detail there without real-life examples.
@@Adamant_IT thanks for the explanation man I'm working through your board basics at the moment, not far in yet but from what I'm seeing it's very well presented. I've done basic repairs but never component level, it's satisfying to bring something back to life, so here I am!
Basic electrical knowledge and fault finding with a multimeter would be a good video IMO. Cheers