@@tylerroy7766 or, just like everyone else, he cuts what he gets and can't afford to buy a new machine just cause there is big wood on a job. We cut wood all the time that's out of the efficiency range of our machines because we know they can do it, but they still have to be able to fit through a pine plantation or a hardwood thinning.
Nice work! Perfect Job from the operator 🌳👍 but if you have 1 men with a chainsaw work with him together. I think that's working the best for machine forest and the wood cutter 😉👍🌲 Regards Jochem
Uhmm, needs grease. I know they are greased at the factory and some operators think that's good enough but listening to that squeaking drives me crazy you lazy bastard!!!
I'm so tired of reading the same grease comment on almost every forest machine video. If you don,t even now that this is from the brake on the rotor then don,t comment
@@bjoneroa17 I assume that they work the same way a grapple skidder swing break works. All i know is that when they squeak then they are under greased. They need lots of grease.
@@Hennes003 Don,t know how it is on a skidder. but the swingbrake on the harvesters/forwarders must be dry. put grease on it and it will not work. there are disc sitting togheter with a rough surface between that makes friction. like a brake pad against the brake disc. so no grease on the brake. i am pretty sure you dont put grease on the braking discs on your car either
Dann drücken wir mal die Daumen das keiner von den dicken zurück kommt 🙈
I sure hope they have fixed the issues with the main crane pillars or this is going to be expensive to replace when it fails..
wo sein die vor stocker????
Super, good job 👍
A lot of wasted time,and fuel for a couple trees. Track based machine,with larger head. Better suited for this stand
Tyler Roy! You don't now much
Swe.Bras64 33 years logging experience. Top producer for our mill
Tuke 22 clearly the landowner chose wrong contractor with, no knowledge of equipment for use in such stand
@@tylerroy7766 or, just like everyone else, he cuts what he gets and can't afford to buy a new machine just cause there is big wood on a job. We cut wood all the time that's out of the efficiency range of our machines because we know they can do it, but they still have to be able to fit through a pine plantation or a hardwood thinning.
Husky would look after this quick!!!
Bei solch dicken Apparaten wäre ein Zufäller nicht schlecht gewesen.
Very impressive
Geiles Video 😉👍🏻
💕💯
Варварская работа!!!
8.20 Perfect operator
I tell him! 😉
Yeah gets a lot done in big timber with a smaller head.👍🏻
Sag mal, zeigst du uns so oft John Deere Maschinen weil die an jeder Ecke arbeiten oder bist du begeisterter JD Fan?
Nice work! Perfect Job from the operator 🌳👍 but if you have 1 men with a chainsaw work with him together. I think that's working the best for machine forest and the wood cutter 😉👍🌲
Regards Jochem
Ich mag sher harvester
get a ponsse harvester
better you get a brain.
Haha 😂 the people with a brain avoid buying John Deere harvesters.
Get a harvester built in Finland.. oh.. they are both built in Finland.
Too small of a machine for the job
Gleicht eher einen Himmelfahrtskommando, nimm die Säge.
Uhmm, needs grease. I know they are greased at the factory and some operators think that's good enough but listening to that squeaking drives me crazy you lazy bastard!!!
The squeaking you hear in these harvester videos is from the rotator brake on the head. Keeps the head from swinging wildly.
I'm so tired of reading the same grease comment on almost every forest machine video. If you don,t even now that this is from the brake on the rotor then don,t comment
@@bjoneroa17 I assume that they work the same way a grapple skidder swing break works. All i know is that when they squeak then they are under greased. They need lots of grease.
@@Hennes003 Don,t know how it is on a skidder. but the swingbrake on the harvesters/forwarders must be dry. put grease on it and it will not work. there are disc sitting togheter with a rough surface between that makes friction. like a brake pad against the brake disc. so no grease on the brake. i am pretty sure you dont put grease on the braking discs on your car either
😂
Vollprofi, absolute Katastrophe, wenn ich schon das klappern und Quietschen höre wird mir ganz anders
jo bitte schmierts alle die Pendelbremse 😂😂😂😂