I tried to cover every topic that you would want to know about when choosing where to buy one of these guys from. If there is another topic you wanna know about the Dummy 13's please let me know and I will try to respond!! Also please note that this isn't covering every Dummy 13 and just the 3 companies I bought mine from. The Etsy seller I bought mine from is currently not selling but if he does again here is his store: www.etsy.com/shop/ImmersiveDesignStore?ref=yr_purchases There are many others on Etsy also selling Dummy 13's, they may have different prices from the one I bought but most have great customization options which help prove that they actually print them and aren't drop shipping I haven't bought one from this seller so I can't say how good the quality is but if I were to buy another Dummy 13 it would probably be from this Etsy seller: www.etsy.com/listing/1649527448/dummy13-kit-assembly-required?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=Dummy+13&ref=sc_gallery-1-2&pro=1&bes=1&search_preloaded_img=1&plkey=1080ccace5270d09553b4c91b76c44f38dc4ae00%3A1649527448 Here are the timestamps to all the topics covered in this video: 0:00 intro 1:20 quality 6:05 price 7:40 accessories 13:02 shipping 14:33 standing test 16:43 building process 20:08 customer service 22:03 promotion 22:40 reliability 24:53 is it worth the price? 27:40 outro/winner??
@@P2lex-zy5bw My point isn't that "oh Dummy 13 sucks gunpla good!" It's more so that nobody should be charging 70$ for a model that can be printed for free.
In Vietnam, I can buy a Dummy 13 for $1, and I think it's the same quality as your $15 one. I've been playing it for 2 months and its joints are still not loose.
Hi im from cambodia and i bought one for 5000 khmer riels and i can say yours is cheeper by ALOT in vietnam but the it i can say its also like the 15 or 34 dollars one
@@AinsleyFrancis-vp2ov The weak Vietnamese currency is also the reason why I can buy things much cheaper than other countries. $1 is not even equal to our breakfast.
If you really want a Dummy 13 and can't pay much for a decent one, I'd like to point out if you happen to buy a cheap one, you CAN use the super glue hack to fix loose joints. I personally got a cheap figure before researching, which is my bad, but you can totally fix the loose joints and have the figure be AMAZING for posing just like a more expensive one. If you've got a ball joint that's loose, put a little super glue on it and just keep moving it around as it dries and make SURE it's dry before you put it down. It might take a few tiny drops of super glue depending on the looseness but the figure will have stiffer joints you can pose however you want. Another thing I'll say is that the elbow and knee joints are different than other joints on the body and are more risky to use the super glue method on! I assume it's perfectly doable, but it's much easier to accidentally mess up. I hope this helps anyone with or planning to get a cheaper Dummy 13, but as the video says, it's morally best to get one from a good, professional source.
How about instead of getting scammed find one that doesn’t cost 20+ dollars they can be printed for less than 5 dollars worth of filament it’s a genuine scam
don't use superglue on joints, use Pledge floor polish. You can apply it without disassembling the joints, just a drop right into the joint, twist it a bit to smear the floor polish around, then let it dry for a few hours. Same effect, no chance of accidentally locking the joint with superglue
I got a red one for $2 on amazon ($3 with shipping) it took 3 months to arrive( and its 3d printed)in my opinion it was worth it and it was high quality( but its 5.4 inches in my opinion its the perfect size)
I bought 4 of them in an online shop, for about 4 and a half dollars (each is 16k rupiah in my country and that's because of a promo week), then today, they arrived and I immediately build them up (it took about 4 hours more or less, break time included). One of them couldn't stand, because its joints were loose. So, I only pose it for sitting poses, while the other three are used for dynamic poses.
Honestly, if you own a 3d printer just 3d print it. If you print with PLA the overall cost in materials is around 3 bucks. And you dont have to worry about breaking anything. And if you have higher quality printer you can 3d print them in high quality. Just to add this, a lot of dropshipping websites that have cool things probably have a 3d print file they took it from, so you can print it.
I should add that PLA isn't a good plastic to print the joints in. It gets super floppy really fast. I reprinted them in ABS and they're much stiffer and don't wear out. I recommend PETG though as its much easier to print, I just had a spare roll of ABS. The armor can be printed in anything you want.
Ok so if anyone is wondering why the joints become loose? its because they used plastics like PLA to print/inject mold instead of stronger ones like PETG or even better but while printing toxic ASA, the frame parts tho it doesnt matter too much except for the strength i guess
the best dummy13 that i used so far are those costs 2$, it's a molded one, it has 2 upper body(male and female) it has very good ball joints(sandy feel to it). The cheapest which is 1$ has very smooth joints and will become loose quickly(i had to coat it with super glue to tighten). I also have the 3d printed, but I still like the 2$ figure.
The one that I bought I bought a 2 pack of white and black from the official store for 25 dollars love it it’s just I got it un builded and it took me 2 hours to build one and the joints are loose but aside from that amazing
You might have gotten some more complicated ones than I did because I don't feel like it should have taken you 2 hours to assemble them I assemble the five in less than 30 minutes That's not a flex or anything I'm just kind of confused
I got a two pack recently for $18 and they’re good quality, but for one of them the ball joint was too big so when I put the hand on and moved it around it twisted the ball joint off
I got 2 of Shein for 2 dollars and got free shipping bc I had other stuff and they are pretty good the only loose things are the knees and shoulders and I think they are plastic but really hard to build with a couple weapons
Hi! In Argentina you can buy it por $5.000 ARS (pesos)... today, may be cost around U$S 4 dolars.... i can't believe that someone is selling it more than 5dollars... is a shame!
nol one copied the idea. the figure is free to be used for commercial use. everyone has the rights to sell the figure. actually learn your stuff before spreading nonsense
In china I bought 5 dummy’s and each one being 5-3 yen which is about 70-40 English pence for each dummy and it is the same as the 35 dollar dummy that you bought
Print time is 1-2 hours(maybe more on a slow printer) and material is under 3$ even with high quality filament. Now adding up the time for assembly and energy, why would anyone buy this for 30$ or even more? If you buy 10 you could buy your own printer for that money.
Broski.. most people don’t want 10 and even if you do there’s a lot of upkeep and hassle with having a 3D printer. My brother has one and it keeps having issues that he needs to buy something new for or spend time to fix. Some people just want the figure without having to deal with allat.
@@extraanimationbreak Bamubu A1 Mini sells for a little bit over 300. not really much upkeep and it prints reliably 99% of the t ime. even a 13 year old can use a printer
That cheapest one is around 1 USD in my country. But somehow thats what were getting in my country. I wanna buy te 15USD one but havent find any at marketplace inside my country
네가 변한 건지 네가 변한 건지 아니면 내가 변한 건지 내가 변한 건지 이 순간 흐르는 시간조차 미워 우리가 변한 건지 뭐 모두가 그런 건지 뭐 그래 미웠는데 이제 넌 떠났지만 단 하루도 너를 잊은 적이 없었지 난 솔직히 보고 싶은데 이만 너를 지울게 그게 널 원망하기보단 덜 아프니깐
wtf even is this? this is a free model for download. Why are everyone talking like it is a gundam from Bandai or something. Just ask a 3d printing service to print it properly.
보고 싶었어 이렇게 말하니깐 더 보고 싶었어 너희 사진을 보고 있었어도 보고 싶었어 너무 야속한 시간 나는 우리가 밉다 이젠 얼굴 단 한 번만 보는 것조차 힘들어진 우리가 여긴 온통 겨울 뿐이야 팔월에도 겨울이 와 마음은 시간을 달려가네 홀로 남은 설국열차 네 손 잡고 지구 반대편까지 가 이 겨울을 끝내고파 그리움들이 얼마나 눈처럼 내려야 그 봄날이 올까
ive seen 3 types of dummy 13s one with no number on the chest one with the number on the chest and 3d printed ones that are the best and bad ball joints
Honestly. Im gonna buy the cheap one off of Amazon, the figures i use dor stop motions are lose anway😂 id rather just have them all the same so i can master the loosened figures 👍
I got one of these toys off of SHEIN (yes Im that poor) and the middle piece (under the chest) is very hard to put in, I can’t put it in no matter what and I wanna know if anyone else has had that problem with buying them?
I got one from shoppee and its on china it will took some days to reach your house and next it comes with support and theres a instructions to build and yeah thats only it you can also buy in some of bio so if you want just order it so you cam become happy to the real toy that you want for posing or drawing so just buy the true one guys
Well i buy 2 a month ago and Arive yesterday and i happy of it Seen this video i realized i bought the 5 dollar kind Well kinda explain how Losen joint are But hey beggar can't be chooser, gonna work what you have And if you have a Joint Problem I have solution but risky Use super glue and a Toothpicks or small wood like toothpick Find the loosen joint Disembly the part Find the Hook joint 🪝 where you put the Ball joint on it and gently use tootpick coated in super glue on the insides hook area and don't use to much of Glue of it Wait for dry and test it if it still loosen If not then resembly it and Poses If characters still fell when posing Buy a Figure stand
You can find it under either name. Dummy 13 is the original name the creator gave it and that a lot of sellers use. Titan 13 is the name someone who “stole” it called it. The guy who took it blew up online so everyone knows it as the Titan 13 even though it’s meant to be Dummy 13.
It's kinda clickbait, the website says $70 but is always on sale for around $30-ish. It may actually be $70 but I think it's a scummy tactic to make it look like you're getting a really good deal.
i buy my ones one chinese websites becuz i live in china im still finding ones that have most of the time tight joints cuz they tend to get loose is there a way to tighten the joints then the figure would be fine
I tried to cover every topic that you would want to know about when choosing where to buy one of these guys from. If there is another topic you wanna know about the Dummy 13's please let me know and I will try to respond!! Also please note that this isn't covering every Dummy 13 and just the 3 companies I bought mine from.
The Etsy seller I bought mine from is currently not selling but if he does again here is his store: www.etsy.com/shop/ImmersiveDesignStore?ref=yr_purchases
There are many others on Etsy also selling Dummy 13's, they may have different prices from the one I bought but most have great customization options which help prove that they actually print them and aren't drop shipping
I haven't bought one from this seller so I can't say how good the quality is but if I were to buy another Dummy 13 it would probably be from this Etsy seller: www.etsy.com/listing/1649527448/dummy13-kit-assembly-required?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=Dummy+13&ref=sc_gallery-1-2&pro=1&bes=1&search_preloaded_img=1&plkey=1080ccace5270d09553b4c91b76c44f38dc4ae00%3A1649527448
Here are the timestamps to all the topics covered in this video:
0:00 intro
1:20 quality
6:05 price
7:40 accessories
13:02 shipping
14:33 standing test
16:43 building process
20:08 customer service
22:03 promotion
22:40 reliability
24:53 is it worth the price?
27:40 outro/winner??
15 dollar wins
For the supposed price of the red one, 70$ USD, you could get a Master Grade or Real Grade gunpla, which is way better than it in quality.
And?
@@P2lex-zy5bw My point isn't that "oh Dummy 13 sucks gunpla good!" It's more so that nobody should be charging 70$ for a model that can be printed for free.
Yup
And way way more possibilities, accessories, design, size and it's actually made by bandai. You can almost get 3 Real grade gunplas with $70 USD.
The material cost more than the figure@@morepenguins6247
In Vietnam, I can buy a Dummy 13 for $1, and I think it's the same quality as your $15 one. I've been playing it for 2 months and its joints are still not loose.
Hi im from cambodia and i bought one for 5000 khmer riels and i can say yours is cheeper by ALOT in vietnam but the it i can say its also like the 15 or 34 dollars one
But in Vietnam, your currency is very weak like one Australian dollar is 25,000 dong
@@AinsleyFrancis-vp2ov The weak Vietnamese currency is also the reason why I can buy things much cheaper than other countries. $1 is not even equal to our breakfast.
@@namhungnguyen7700 slayy
"Very nice and tight" 5:37
-Extra AnimationBreak
Damnit
@@extraanimationbreak💀💀💀
@@extraanimationbreak 🤣🤣
"i thought this guy would never come" at the start
My 3d printed looks much better😂
If you really want a Dummy 13 and can't pay much for a decent one, I'd like to point out if you happen to buy a cheap one, you CAN use the super glue hack to fix loose joints.
I personally got a cheap figure before researching, which is my bad, but you can totally fix the loose joints and have the figure be AMAZING for posing just like a more expensive one. If you've got a ball joint that's loose, put a little super glue on it and just keep moving it around as it dries and make SURE it's dry before you put it down.
It might take a few tiny drops of super glue depending on the looseness but the figure will have stiffer joints you can pose however you want. Another thing I'll say is that the elbow and knee joints are different than other joints on the body and are more risky to use the super glue method on! I assume it's perfectly doable, but it's much easier to accidentally mess up.
I hope this helps anyone with or planning to get a cheaper Dummy 13, but as the video says, it's morally best to get one from a good, professional source.
Are if you have a 3d printer print it
@@rachelwillyard9475 That too
@@rachelwillyard9475 Engrish
How about instead of getting scammed find one that doesn’t cost 20+ dollars they can be printed for less than 5 dollars worth of filament it’s a genuine scam
don't use superglue on joints, use Pledge floor polish. You can apply it without disassembling the joints, just a drop right into the joint, twist it a bit to smear the floor polish around, then let it dry for a few hours. Same effect, no chance of accidentally locking the joint with superglue
I live in the uk and dont have that brand is their anything similar
Future/Mop-N-Glow… Basically, look for acrylic floor polish, and that should have the same characteristics.
@@ronaldpaterni5081 what about acrylic varnish? the one for painting?
@@gregoriusaryo3560 Yes, it should work.👍So long as the parts can still move separately, it should be OK.
I got a red one for $2 on amazon ($3 with shipping) it took 3 months to arrive( and its 3d printed)in my opinion it was worth it and it was high quality( but its 5.4 inches in my opinion its the perfect size)
Really🤔
Welp, off I go to manufacture em¯\_(ツ)_/¯
thats lucky😂
Well i got $1.5 in my country, and free shipping
Besides it also has a nice personality
In my country, even cheap quality ones cost around $60 + shipping charges 😢
still a good figure the cheaper version.
i have it displayed at my office and its a good stress reliving
I think left is best
Price 👍
Accesories👍
Look👍
Standing👍
I bought 4 of them in an online shop, for about 4 and a half dollars (each is 16k rupiah in my country and that's because of a promo week), then today, they arrived and I immediately build them up (it took about 4 hours more or less, break time included).
One of them couldn't stand, because its joints were loose. So, I only pose it for sitting poses, while the other three are used for dynamic poses.
Honestly, if you own a 3d printer just 3d print it. If you print with PLA the overall cost in materials is around 3 bucks. And you dont have to worry about breaking anything. And if you have higher quality printer you can 3d print them in high quality.
Just to add this, a lot of dropshipping websites that have cool things probably have a 3d print file they took it from, so you can print it.
I just did a 200% scale one recently, ends up being about the same size as a Hot Toys figure, came out great.
@Chris_Ramsay1 Good to know, thank you. I've got the Deadpool dummy 13 printing right now at 200% .
I should add that PLA isn't a good plastic to print the joints in. It gets super floppy really fast. I reprinted them in ABS and they're much stiffer and don't wear out. I recommend PETG though as its much easier to print, I just had a spare roll of ABS. The armor can be printed in anything you want.
Ok so if anyone is wondering why the joints become loose? its because they used plastics like PLA to print/inject mold instead of stronger ones like PETG or even better but while printing toxic ASA, the frame parts tho it doesnt matter too much except for the strength i guess
Man the 5 bucks figure lookin like Miguel O’Hara shi-
The colors are really cool but the joints and quality aren’t nearly as good as the other 2
Kinda reminds me about him lol
lmao
Thanks for sharing, i was thinking of getting/printing a few of these for Training Bots for my action figures.
the best dummy13 that i used so far are those costs 2$, it's a molded one, it has 2 upper body(male and female) it has very good ball joints(sandy feel to it). The cheapest which is 1$ has very smooth joints and will become loose quickly(i had to coat it with super glue to tighten). I also have the 3d printed, but I still like the 2$ figure.
34 dollars for an fdm print is insane. At that price it would have to be SLS or at the very least SLA.
If you have 3d printer just print it😩👍
I can be hard to tune the printer to be able to do this.
@@LZprintsYou honestly just need to have 0.4 mm nozzle and 0.15 mm layers, the filament i use personally is PLA
I am having a lot of trouble trying to find the model online
@@Aurazilla Check Printables
@@bruswain9158I can’t find any on printables?
Do you animate lego? Also, where do you get these?
""i thought this guy would never c..."
bro 😭
The one that I bought I bought a 2 pack of white and black from the official store for 25 dollars love it it’s just I got it un builded and it took me 2 hours to build one and the joints are loose but aside from that amazing
what store because I got a 5 pack from amazon
You might have gotten some more complicated ones than I did because I don't feel like it should have taken you 2 hours to assemble them I assemble the five in less than 30 minutes That's not a flex or anything I'm just kind of confused
I got a two pack recently for $18 and they’re good quality, but for one of them the ball joint was too big so when I put the hand on and moved it around it twisted the ball joint off
Because mine don't have the logo
I think the $15 one is made from ABS+
Do you have the 13 logo on your dummy 13
all of these can stand normally if its the magnet version your buying and you have a magnet and magnet or a metal tray
I'm in Thailand, the cheapest one I've seen on shoppee is 17 baht which is like half a dollar..
I got 2 of Shein for 2 dollars and got free shipping bc I had other stuff and they are pretty good the only loose things are the knees and shoulders and I think they are plastic but really hard to build with a couple weapons
I bought a pack and It cost 27 bucks on Amazon
oh and guys my new t13 is arriving to my house tomorrow on Thursday🥳!
They’re actually called the Dummy13. anything that says “___13” is a free lrjnt
For all those wondering don't order the cheap one. Its cheap plastic and mine broke easily
Hi! In Argentina you can buy it por $5.000 ARS (pesos)... today, may be cost around U$S 4 dolars.... i can't believe that someone is selling it more than 5dollars... is a shame!
These are also compatible with the Lego joints and sockets but the socket is very tight on them
i’m getting a bunch of them for 47 bucks so not really worried about any of them breaking
I prefer....
The free that you need to print
Me who has built a 1 Foot tall Mecha out of legos fully articulated and actually has more joints than the T13 because it has posable fingers. _🗣️‼️🔥_
Nobody asked 🗣️‼️🔥
@@Ultrarsigma334I did
@@Ultrarsigma334I also did
Because I dont have a 3D printer, I just need to buy a service that is without a brand, because the designer does not sell the model.
Good news! They started selling them!
Really?! Do you have the link to them?
@@extraanimationbreakit’s actually called Titan 13.
There was a picture of the original, but the person who 3d printed the figure didn’t sell any and other people just copied the idea and sold it.
nol one copied the idea. the figure is free to be used for commercial use. everyone has the rights to sell the figure. actually learn your stuff before spreading nonsense
In china I bought 5 dummy’s and each one being 5-3 yen which is about 70-40 English pence for each dummy and it is the same as the 35 dollar dummy that you bought
Print time is 1-2 hours(maybe more on a slow printer) and material is under 3$ even with high quality filament.
Now adding up the time for assembly and energy, why would anyone buy this for 30$ or even more?
If you buy 10 you could buy your own printer for that money.
Broski.. most people don’t want 10 and even if you do there’s a lot of upkeep and hassle with having a 3D printer. My brother has one and it keeps having issues that he needs to buy something new for or spend time to fix. Some people just want the figure without having to deal with allat.
@@extraanimationbreak Fair enough.
@@extraanimationbreak Bamubu A1 Mini sells for a little bit over 300. not really much upkeep and it prints reliably 99% of the t ime. even a 13 year old can use a printer
That cheapest one is around 1 USD in my country. But somehow thats what were getting in my country. I wanna buy te 15USD one but havent find any at marketplace inside my country
crazy how the 70 dollar one went down to £16 in like 4-5 months
6*
네가 변한 건지 네가 변한 건지 아니면 내가 변한 건지 내가 변한 건지
이 순간 흐르는 시간조차 미워 우리가 변한 건지 뭐 모두가 그런 건지 뭐
그래 미웠는데 이제 넌 떠났지만 단 하루도 너를 잊은 적이 없었지 난
솔직히 보고 싶은데 이만 너를 지울게 그게 널 원망하기보단 덜 아프니깐
wtf even is this? this is a free model for download. Why are everyone talking like it is a gundam from Bandai or something. Just ask a 3d printing service to print it properly.
In my country(Cambodia) it cost 1.50 and its as good as the red one
I bought a cheep t13 and none of the pieces went in like the arms. Made me kinda sad ):
끝이 보이지 않아 출구가 있긴 할까
발이 떼지질 않아 않아
잠시 두 눈을 감아 여기 내 손을 잡아
저 미래로 같이 달아나자
dude when I built my orange and blue figure it was so loose and I lost almost all the pieces
that "bad video" is from the designer of Dummy 13. 😉
보고 싶었어 이렇게 말하니깐 더 보고 싶었어 너희 사진을 보고 있었어도 보고 싶었어
너무 야속한 시간 나는 우리가 밉다 이젠 얼굴 단 한 번만 보는 것조차 힘들어진 우리가
여긴 온통 겨울 뿐이야 팔월에도 겨울이 와 마음은 시간을 달려가네 홀로 남은 설국열차
네 손 잡고 지구 반대편까지 가 이 겨울을 끝내고파 그리움들이 얼마나 눈처럼 내려야 그 봄날이 올까
printed 2 of them at home for $1.28 USD of filament
You should bye it from the real website to get it fully built it way easyer
Today i try to buy that on Temu for 1,3 dollar ,I want to test quality.
Go for it! Let me know your results!
@@extraanimationbreak Can I ask?, How tall Is your figures?
My Dummy 13 are all 5.5 inches except the *big one* I got
@@extraanimationbreak Ok that one from Temu Is too 5.5 inch, but it ship to me at 5 days, so I Will write the result.
@@extraanimationbreak I have It and Its actually hard for build but Its not bad quality for 1,3 dollar
Are these all Amazon?
And now you can buy a Bambulab A1 Mini for $200, and print as many as you like yourself.
ive seen 3 types of dummy 13s one with no number on the chest one with the number on the chest and 3d printed ones that are the best and bad ball joints
Bro your helpful thx so much this really helped me
Glad I could help!!
the official 34 dollar one comes essembled though
The 5 dollar one is the unique i can buy
Honestly. Im gonna buy the cheap one off of Amazon, the figures i use dor stop motions are lose anway😂 id rather just have them all the same so i can master the loosened figures 👍
I got one of these toys off of SHEIN (yes Im that poor) and the middle piece (under the chest) is very hard to put in, I can’t put it in no matter what and I wanna know if anyone else has had that problem with buying them?
Same that happened to my first one
I got a 9 dollar one and it’s got the same quality as the expensive one and it came with more stuff💀
If you buy it from temu it comes in really good QUALITY
이 음악을 빌려 너에게 나 전할게 사람들은 말해 세상이 다 변했대
다행히도 우리 사이는 아직 여태 안 변했네
늘 하던 시작과 끝 안녕이란 말로 오늘과 내일을 또 함께 연결하자고
멈춰있지만 어둠에 숨지마 빛은 또 떠오린니깐
Oh and btw your ok with the 15$ one because the instruction don’t help you
Which stick titans have a sword holster I've been trying to find a sword holster
Do you have link to the one in the left
벚꽃이 피나봐요 이 겨울도 끝이 나요
보고 싶다 보고 싶다 보고 싶다 보고 싶다
조금만 기다리면 며칠 밤만 더 새우면
만나러 갈게 만나러 갈게 용서해 줄게 용서해 줄게
The black one snaps easily
I’d go with the T13
I got one from shoppee and its on china it will took some days to reach your house and next it comes with support and theres a instructions to build and yeah thats only it you can also buy in some of bio so if you want just order it so you cam become happy to the real toy that you want for posing or drawing so just buy the true one guys
I Buy I Shoppee to
Well i buy 2 a month ago and Arive yesterday and i happy of it
Seen this video i realized i bought the 5 dollar kind
Well kinda explain how Losen joint are
But hey beggar can't be chooser, gonna work what you have
And if you have a Joint Problem
I have solution but risky
Use super glue and a Toothpicks or small wood like toothpick
Find the loosen joint
Disembly the part
Find the Hook joint 🪝 where you put the Ball joint on it and gently use tootpick coated in super glue on the insides hook area and don't use to much of Glue of it
Wait for dry and test it if it still loosen
If not then resembly it and Poses
If characters still fell when posing
Buy a Figure stand
Dont tell me these were off amazon
The cheapest one was off Amazon. The rest were other websites.
@@extraanimationbreak oh ok
this only cost less than $1 in the philippines 😅, bought 3 of it from shopee
found a pack of 9 of them for 30 bucks 💀
depends on the seller when it comes to amazon
China having these for 9 cents: 🗿 🍷
Lucky ahh 😂
9 cents is “way better” than 6 whole dollars 😅🤯🤯
its too frustating man. its really hard to find the original titan 13 one in asian marketplace
눈꽃이 떨어져요 또 조금씩 멀어져요
보고 싶다 보고 싶다 보고 싶다 보고 싶다
얼마나 기다려야 또 몇 밤을 더 새워야
널 보게 될까 널 보게 될까 만나게 될까 만나게 될까
넌 다 깨달았냐 내 가장 소중한 친구야
따뜻한 아침 돌아올 거야
어떤 어둠도 어떤 계절도
영원할 순 없으니깐 내가 말했잖아
I got 10 for 40 bucks on Amazon
But it hasn’t arrived
I’m just hoping there 3d printed
In Thailand we got em for 50 cents
And if you don’t want knockoffs I highly recommend you should get like a gundum for 34$
Yeah why don’t just get a gundum 💀
Os bonecos originais sempre tem um numero no peito não é? Acho que comprei um falsificado...
You know mision 13?, opinions?
I printed at 300% for $5 in filament
Bro got Deadpool 💀
I bought 7 for 13$
Can I have one like the red one? Is it called the Titans or no or the rain figure? Can you give it back? I mean, thank you give it to me.
Is it called titan 13 or dummy 13
You can find it under either name. Dummy 13 is the original name the creator gave it and that a lot of sellers use. Titan 13 is the name someone who “stole” it called it. The guy who took it blew up online so everyone knows it as the Titan 13 even though it’s meant to be Dummy 13.
I have the dummy 13 its looks like the 5$ dummy but its knida better cuz the joints it good
I brought the 3D printed
오늘도 비가 내릴 것 같아 흠뻑 젖어버렸네 아직도 멈추질 않아
저 먹구름보다 빨리 달려가 그럼 될 줄 알았는데 나 겨우 사람인가 봐
몹시 아프네 세상이란 놈이 준 감기 덕분에 눌러보는 먼지 쌓인 되감기
넘어진 채 청하는 엇박자의 춤 겨울이 오면 내쉬자 더 뜨거운 숨
I got the T13. It was only for 1 Dollars and 27 Cents from shopee
What is good
Was it good
@@thelegendaryslime157 yes
@@HelpHelp-CatIsDead1send the shoppe link
holy crap, 70 bucks for those things?! just buy an import figure, it's more high quality and better articulation 😂
It's kinda clickbait, the website says $70 but is always on sale for around $30-ish. It may actually be $70 but I think it's a scummy tactic to make it look like you're getting a really good deal.
@@extraanimationbreak oh, they're using *those* tactics
3 dollars on shein with free shipping
Bro I have one like 70$ but on Amazon and is 10$ and I have one really like the 5$ one but it is my favorite ❤️
I got one for 1.50$ and its just like the original
Yo is that bloodsport
i buy my ones one chinese websites becuz i live in china im still finding ones that have most of the time tight joints cuz they tend to get loose is there a way to tighten the joints then the figure would be fine
Great video. ❤🎉
You should not buy any, printing one costs less than any of those prices