3M engineer and GR86 owner here! Happy to see you using our adhesive remover- that stuff is awesome for removing spoilers secured with our adhesives. I’m dreading the days when I do that to my GR86 because of how anal I was during installation… 😅
Next time I need to remove 3M tape, I will use this. It is an absolute pain to remove it. Goo gone doesn’t work, alcohol doesn’t work, heat gun doesn’t work. What worked was almost 2 hours of all of that plus a utility knife and sure as hell scratched the clear cut but i was trading in so not my problem. Seriously getting this next time.
Great video you also could have used Goo Gone with no damage to the paint .. spray it or Dab it on to the adhesive if its heavy adhesive let it sit 5 to 10 minutes then go back with a micro fiber cloth and rub away it will take a few tries but in the end look like new.
My buddy and i both have white VBs. He got a wing from AFD and it turned ugly yellow immediately in the sunlight due to bad clear coat. He then went on back and forth with AFD and received 4 more replacement wings that all turned yellow as well! Lol i got my noble wing from import image racing however and its been perfect and has not changed color. Also a 3 piece design as apposed to the 5 piece design from AFD
My AFD v3.5 wing wasn’t even painted on the bottom and crevasses… there was also debris and wood chips w/ clear coat over it on the bottom in which I cannot remove.. emailed them about it and never responded back to me..
I have this same AFD wing and am actually very disappointed. If you look at the wing’s angle of attack it actually generates lift rather than downforce. Compare the angle it to any OEM STi wing and you’ll see what I mean. Curious to what your thoughts are.
My AFD v3.5 wing wasn’t even painted on the bottom and crevasses… there was also debris and wood chips w/ clear coat over it on the bottom in which I cannot remove.. emailed them about it and never responded back to me..
My AFD v3.5 wing wasn’t even painted on the bottom and crevasses… there was also debris and wood chips w/ clear coat over it on the bottom in which I cannot remove.. emailed them about it and never responded back to me..
I have an extra wing from AeroFlow Dynamics all black if anyone is interested. I've been meaning to sell it for some time because shipping it back would cost way more.
Wings too narrow and short for the wider body of the VB. Doesn't fit the car IMO. This gen is a duckbill gen for sure at least till someone makes a wing that actually fits this car.
love you man & watching your vids❤!! however as a true Subaru enthusiast I am 100% against putting an STi wing on anything other than an STi... Type RA wing fine, APR wing fine, anything aftermarket ok but not an STi wing or replica. NOPE
We all care so much about your opinion on the matter. I'm going to think of you when I put the STI badged ground effects and the STI badged struts on my car. 😂
Appreciate the Subaru content...love the STI Wang!!
3M engineer and GR86 owner here! Happy to see you using our adhesive remover- that stuff is awesome for removing spoilers secured with our adhesives. I’m dreading the days when I do that to my GR86 because of how anal I was during installation… 😅
"engineer". Everything's "engineer" these days..
@@slonkijippie my mechanical engineering degree would disagree with you lol
@@dawsonjohannes613 mechanical engineering student and gr86 owner here. Can I get an internship pls?
Next time I need to remove 3M tape, I will use this. It is an absolute pain to remove it. Goo gone doesn’t work, alcohol doesn’t work, heat gun doesn’t work. What worked was almost 2 hours of all of that plus a utility knife and sure as hell scratched the clear cut but i was trading in so not my problem. Seriously getting this next time.
Yes more VB content! Looking good, can’t wait to see it in person!
Working on it!
Kevin, the master of installation instructions. Even IKEA calls Kevin to develop their furniture installation instructions 😅
Now you need a black roof wrap to break up some white on top now 😊
Great video you also could have used Goo Gone with no damage to the paint .. spray it or Dab it on to the adhesive if its heavy adhesive let it sit 5 to 10 minutes then go back with a micro fiber cloth and rub away it will take a few tries but in the end look like new.
My buddy and i both have white VBs. He got a wing from AFD and it turned ugly yellow immediately in the sunlight due to bad clear coat. He then went on back and forth with AFD and received 4 more replacement wings that all turned yellow as well! Lol i got my noble wing from import image racing however and its been perfect and has not changed color. Also a 3 piece design as apposed to the 5 piece design from AFD
My AFD v3.5 wing wasn’t even painted on the bottom and crevasses… there was also debris and wood chips w/ clear coat over it on the bottom in which I cannot remove.. emailed them about it and never responded back to me..
Zero chance I wouldn’t screw up this install lmao. Nice job Kevin!
Looks so clean bro, when the gr86 turbo comingg
Flawless Install Kevin! A+
That looks real good. Had a coworker install one and you could see he didn’t know how to hold a drill straight nor did he know how to transfer a hole.
I have this same AFD wing and am actually very disappointed. If you look at the wing’s angle of attack it actually generates lift rather than downforce. Compare the angle it to any OEM STi wing and you’ll see what I mean. Curious to what your thoughts are.
My AFD v3.5 wing wasn’t even painted on the bottom and crevasses… there was also debris and wood chips w/ clear coat over it on the bottom in which I cannot remove.. emailed them about it and never responded back to me..
love it Kev!
Thanks!!
My AFD v3.5 wing wasn’t even painted on the bottom and crevasses… there was also debris and wood chips w/ clear coat over it on the bottom in which I cannot remove.. emailed them about it and never responded back to me..
Looks great. Nicely explained.
nice but i would love to see a second gurney flap at the bottom where the duck bill was (Moor Downforce😁)
Looks amazing ❤
thought you would use frog tape pre-drill to prevent chipping the paint
He sounded so pained when drilling those holes lmao
Kevin could you please review the new Juiced pipes gr86 exhaust 🙏
They're on the way!
How’s the car after your protune?
that wing looks absolutely heinous on it
Could be worse!
The wing got vibration when close the trunk lid. Anyone know how to fix it?
That's normal, even the OEM one does it.
I don't know what this says about me but when I saw the GR86 in the opening few seconds I thought it was an SRT Viper 😭
Only the best China has to offer. Have fun with that water retaining,.
I think this version still has the whistling noise.
How do you know?
I have an extra wing from AeroFlow Dynamics all black if anyone is interested. I've been meaning to sell it for some time because shipping it back would cost way more.
How much?
Still available?
@@ScottHill-ks6ib yeah bro
@@ColFighter018 I’m also interested so let me know
For some reason that wing just doesn’t match the body style of VBs for me. I’ve seen one in person and looks horrible.
Too bad a good one won't come out for the BRZ, there was one but the site never re-opened. Other ebay crap looks bad
He's gone to the dark side! 😥
😈
Car really need the paint match bumpers and side skirts then be 🔥
It's getting there!
We always get a good laugh when we see the new wrx with sti wing at work
lol wrx needs tint badly
Wings too narrow and short for the wider body of the VB. Doesn't fit the car IMO. This gen is a duckbill gen for sure at least till someone makes a wing that actually fits this car.
The wrx just isnt for me
That's ok, that's what makes modifying cars fun. Everyone has their own style!
Magnet.
love you man & watching your vids❤!! however as a true Subaru enthusiast I am 100% against putting an STi wing on anything other than an STi... Type RA wing fine, APR wing fine, anything aftermarket ok but not an STi wing or replica. NOPE
@@holeshot26 it’s a Subaru with a wing. Nobody in the real world cares.
Haha, shut up.
Can buy this wing from subaru for the vb they just expensive an can order them already on the car in a few other countries
We all care so much about your opinion on the matter. I'm going to think of you when I put the STI badged ground effects and the STI badged struts on my car. 😂
@@waykool698 when you get to the real world you lmk😂
sell those cars and get into better cars
you have a roblox logo as your PFP...
@@turbo________chill, he’s 13. 😂
The bottom end of the rear is dreadful. Why did Subaru decide to plop that plastic mess onto this car is a mystery.