MT07SP: Öhlins review / NIX22 and STX46 / Walkaround and Motovlog
Вставка
- Опубліковано 7 лют 2025
- Got any questions? Comment down below 👌
Front: Öhlins NIX22 Cartridgekit
MT07 version FKS204
Rear: Öhlins STX46 Shock
MT07 version YA419
Yamaha doesn't sell a sp version of the MT07, I call this a sp model because it has Öhlins on it, like typical sp models from other motorcycles that come like that from factory.
Great build man 👨!
Thanks! :)
Im doing this to my SV.
Ha ben ik weer haha, Ik heb van hyperpro de yamaha mt07 streetbox besteld, die gaat er over 2 weken op.
Dat zijn progressieve veren voor en een progressieve veer achter.
Heb ik nog een vraagje, rijdt de motor gewoon hetzelfde als altijd alleen zakt hij minder ver in bij remmen en bij diepere of hogere hobbels veert hij beter?
Of rijdt hij ook anders als je normaal op de weg rijd ( gewoon recht uit enz)?
En hoe gaan kleine rotondes? gewoon hetzelfde als altijd of moeilijker of makkelijker.
Je maakt leuke filmpjes, ook die ene over de nieuwe mt07
Thanks voor het complimentje! :) en ik weet nog goed wanneer ik mijn eerste ritten deed met de nieuwe suspensie. Dan kon ik dus nog goed vergelijken met de originele die ik eerder had. Het viel me op dat de motor stijver en dus responsiever was na imput. Dus richtingen veranderen gaat sneller, in bochten blijft de lijn preciezer. Hobbels zijn natuurlijk dan op zich minder gedempt (afhankelijk van de instellingen en ook met progressieve veren is dit beter natuurlijk) maar hogere snelheden, bochten en richtingsveranderingen zijn een heel stuk vlotter en preciezer, percies schaatsen ipv wielen, als je snapt wat ik bedoel :) en idd bij remmen duikt hij minder dus kans op abs en slippen is minder omdat er minder tijd en afstand is dat de veren duiken, dus hard braking gaat beter
@@Riders_Pulse ah Thanks hier heb ik wat aan.
Hopen dat de hyperpro veren ook dit gevoel geven.
Your mt looks like the one I'd like to own.
@@monsun3365 thanks :)
bedankt voor de video.
hier heb ik wat aan.
is de motor nog steeds even wendbaar? kleine rotondes enz
No problem, en jup zeker, preciezer dus zelfs meer wendbaar :)
Where can I buy the exhaust heat shield that is seen located just below the radiator? Summer rides and my legs get extremely hot.
Thanks
Hey, do you mean the bellypan? That's from ermax.
Non painged: www.silverstonemotor.com/en/engine-spoilers/11965-ermax-yamaha-mt07-2021-2022-belly-pan-raw.html
Painted: www.silverstonemotor.com/en/engine-spoilers/11966-89116-ermax-yamaha-mt07-2021-2022-belly-pan-painted.html#/6610-colors_mt07_2021_22-metal_blue_21_22_icon_blue
Hi. I bought mt 07 pure 2023 and I noticed with stock suspension i cannot hold the corner very well and during harder breaking abs activates like immediately and the bike is doing all the things you already mentioned. I want to amend this with front and rear ohlins suspension set for street driving mainly. I was wondering if the front cartridges come with oil inside already or do I have to buy separate oil and fill them up??
Hey, you have to get oil seperatly for the front (for example Öhlins 10w). The back comes ready to use. Sometimes dealerships offer free install if you buy it via them, perdonally I did that
@@Riders_Pulse What I was offered regarding the front fork fluid was Ohlins road & track code:01309-01 which is equivalent to 19.0 centistokes at 40 deg.C. I don’t know if this is ok, I’m not fluid expert. What do you think? And how many liters do I need to buy to fill up two forks, I mean is one liter of the fluid enough?
Hello! Thanks for the video, and all the information! I am considering the mt07 and would probably end up doing the suspension upgrade as well, would you say its worth it on a bike like the mt07?
Hell yes! The mt07 is a fun bike with good torque but lacks top end, so very fast riding is a bit less good then like for example the mt09, but all other speeds are awesome to do with the mt07. The suspension upgrades make it a completely different bike with more control, stability and precision. So certainly sporty riding gets a big upgrade by doing that
@@Riders_Pulse Thanks a lot for the reply! Truth be told, i currently have a cb600f hornet which is my first bike, i like it, but encourages a fast riding style which isnt very good since i am a complete novice + i like torque, hence the consideration for the MT-07!
@@SdsThomas what a coincidence, check my earlyer vids, I had a cb600f 2001 before this mt07 👌 completely different indeed, but the 600 is so slow lower in the revs compared to the mt07, the power of the latter is instantly available while with the cb600f you have to wait for it and thus ride in higher revs and faster :p
@@Riders_Pulse Oh, i do need to check them out! I will check if you have video or if you can share if you ever missed the top end power of the hornet in daily and highway riding. Thanks a lot btw for all the information!
@@SdsThomas No prob :) and no, don't miss it at all, torque is more addicting :p plus you can compensate with the mt07 by just shifting more frequently
ha stel ik doe alleen de achtervering met die vering die jij heb (stx46 y430 of heb jij de y419?)
Ga ik dan ook al verschil merken?
Hey, ik heb de YA419. De veer is een stuk meer rigide en de demping in beide richtingen ook, dus het maakt zeker een verschil, maar de voorkant van de mt07 is hoofdzakelijk het probleem op de standaard versie, dus als je zou moeten kiezen, zou k suggereren om de voorkant te upgraden naar de cartridgekit NIX 22. Deze is volledig aanpasbaar en zorgt voor een betere stabiliteit aan de voorzijde ipv de redelijk stuiterende standaard veren
@@Riders_Pulse ah thanks. En dan ook dikkere olie erin?
@@Riders_Pulse zo die kit is 900 euro in Nederland haha. Das niet goedkoop.
Misschien eerst dikkere olie proberen?
@@iefie well, hier in België hebk ook iets soortgelijk betaald ze, idd veel geld :p ik heb er die 10w olie vn Öhlins zelf laten inkappen met 9mm veren ipv 8mm, voor mijn lichaamsgewicht is da goed :) en jha kheb iets gehoord da de 'dave moss' mod noemt waar da ge de spacers van de originele vering inkort en er dan d15w olie inkapt, da zou ook al veel beter zijn. Mss da de garage zo iets voor je wil doen, donno. Ma ja zwaardere olie zou misschien ook al een verschil maken
@@iefie Öhlins is een duurder merk, ik weet da hyperpro ook mt07 kits heeft voor minder geld, mss ook is daarnaar kijken? Just suggesting :)
Love the fly screen, what make is that?
Nice set up.
Thanks! That's the puig touring windscreen
how much cost both?
Shock was 755eur and cartridgekit was 849eur
Shock was 755eur and cartridgekit was 849eur