Neptune Apex A3 ... Unboxing and full setup step by step
Вставка
- Опубліковано 21 сер 2024
- little longer video here this time but worth the watch. Will go over a full unboxing and setup step by step of the Apex A3. I even show you some simple coding you can write to avoid some of our common mistakes and add redundancies.
Would you like to buy frags directly from my system? Well, now you can. If you're located in Canada!!! Just follow the link below to my website
www.niagarafir...
Be sure to hit the subscribe, like and notification buttons to support the channel and help it grow and so you always see whats new coming out from Niagara Fire Corals.
You can also help support the channel with the link below "Buy me a coffee" Gosh knows I drink enough of it and I thank you.
www.buymeacoff...
Song: Raude - paradise [NCS Release] Music provided by NoCopyrightSounds Free Download/Stream: ncs.io/rparadise Watch: ncs.lnk.to/rpar...
Oh my goodness, thank you so much this video. I'd always wanted an Apex, and finally bit the bullet when prices came down for Black Friday. It came today, and I'm pumped to get it going. This video is an amazing help.
Your very welcome 👍 so glad the video can help😊
THANK YOU! I just bought my first Apex (A3 Jr) this week and couldn't figure out why my included optical water level sensor was alarming every hour when it was default configuration in the CLOSED position. I'm using mine to notify when the auto top off is getting too low, so after countless hours on forums trying to figure this out, I stumbled on your video and I learned a lot! Now I understand if the sensor is under water (good for my use case) then it IS closed. I was confused before because the floor leak detector is the opposite, when it's closed, thats bad! Now I totally get it and was able to change my advanced alarm config to alarm when my ATO_Lo sensor is OPEN, not closed. I know this video took you some time to put together, and I sincerely appreciate you for sharing your knowledge! Happy reefing ❤
Thank you so much and I'm very glad to help 😊
This was a godsend for me. Thank you so much. Now I need to find a video like this to help me setup my Trident
Here you are my friend...
ua-cam.com/video/nrWSTSVhVJg/v-deo.html
@@niagarafirecorals if I played that side of the field, I would ask you to marry me. Guess you’ll just have to accept a like and subscribe lol.
@@xenic0770 Thank you so much 👍
I was extremely lost this helped a lot thanks
Awesome 👍
Never considered getting an apex cuz I run my systems pretty simple but after seeing this video , it’s going to def be on my wish list. Thanks!
Thank you, and I'm so glad it helped you make the step 👍
what a good done! so long,
Dude, great video.
Thanks so much. I'm glad you enjoyed
2 more silly questions: 1) I have 2 heaters connected to an Inkbird dual controller. Do I simply plug the Inkbird into Apex or do I need to plug and program each of the 2 heaters individually and eliminate the Inkbird? 2) Can you quickly explain the Set and Fallback settings in each port? Thank you in advance.
I would eliminate the ink bird and plug directly into the apex. When you setup the outlets just choose heater and set your set points at desired temp. An example would be 77.0 on and 77.2 off.
First of, thanks for the awesome video. How would you program lighting for a Kessil A360X using their Spectral X controller?
I'm sorry I have no experience with it at all yet.
Thanks for sharing
Brilliant video , question how have you coded your reefmatt 1200 outlet please?
Just use ALWAYS and set to ON
@@niagarafirecorals thanks
thanks for sharing!
Your welcome 👍
@@niagarafirecorals Setting up my apex, starting with the lights, for some unknown reason they wont go one in AUTO mode. Any idea what could be the problem?
@@stephanfehres4720 Would you happen to be using sockets 1 or 8? What light are you using?
using socket 3 and 4 (out of 6)) amd I am using 2 Radion X R15 In ON mode they will work fine@@niagarafirecorals
@@niagarafirecorals I am using 3 and 4 out of 6. I hace 2 Radion XR 15 lights. In ON mode they work well.
I'm new to Apex and this vid was so helpful, so thank you for that. My question is; the first 3 sockets are taken up by fmm alarms. How do I remove those from the socket without losing them. Will the apex create a virtual socket automatically for them, or do i have to program that manually. How do I program a virtual socket if i have to do so? Thanks in advance!
I'm not sure I understand the first part of your question? As for a virtual socket, this is how you do it. Step 1 - In your Apex menu up top click on the button that looks like gears. Step 2 - Now click on the button that looks like a socket. Step 3 - Now click on the gear icon near the top, and you should see a drop-down that will have an option to add a virtual outlet. Hope this helps.
Thank you I will give it a try.
Thank you very much, just do these settings?
I feel like this is a silly question for someone with your Apex experience, but do I program first THEN plug equipment into the Energy Bar, or vice versa? Thanks in advance for the help.
I really wouldn't matter, but keep in mind whatever you plug in will not follow your programming, obviously until you have done it.
Just a quick question why can you not control both tanks with one apex? can you not use modules to expand it and give you the control and monitoring from one unit
Yes, absolutely. However, my first apex is controlling one full system containing 3 tanks so I wanted to separate this as a second system on a separate Apex. Keep an eye on up coming videos as this second system is expanding.
How does the outlets on the energy bar coincide with what your programming. For example if I'm programming 2_1 for my return pump, what outlet on the energy bar do I plug the return pump into?
2_1 would be as follows. The 2 would be the identification of the power bar itself. Meaning all outlets would start with that 2, example 2_1, 2_2, 2_3 etc. The outlets start in the top left 1,2,3,4 bottom row left to right 5,6,7,8. You should also see them indemnified in the bottom left corner of the power bar unless it's the older style. Hope this helps
thank you. i just order my neptune apex
Awesome 👍