i watched a few of your videos and think u explain things well i'm new to this about a yr and a half i done through hole soldering and sm back in school porter & chester learnning computer electronics, went to pitney for about 17 yr, pm machiens, learning the ipads, but this is very interesting i have watched videos so much to get what i can from them, hours and hours and more hours going back and a very lot of notes, i went deep in this hobbie and now need to learn more, thank you and to all who take the time to support the customer they keeps us going
I change my temps a lot. Usually I remove cpu around 370c with 75 air. But I am not firm with my temps. I use this stencil: www.unionrepair.com/maant-c1-magnetic-motive-reballing-stencil-platform-for-a8-a16.html
My iPhone xr has been serviced by the baseband but the technician said there was a crack in the baseband, and the data could not be copied, how should I do it? Thnk you
I assume if you are going to be attempting any type of cpu work, then you should already have the splitting skill down perfectly. Otherwise, there is zero chance at a successful cpu swap. Most of my other videos show the split, but it is very simple. Put on a heating platform, then pull apart when it is the appropriate temp.
sir please I need help. I have an iphone 12 pro max and sometimes appears like pink squares for only a second and when I try to play pubg mobile it crashes so much like every 3 minutes less or more it keeps crashing again all the time, and I'm not able to bring it back to apple for many resons. Can you help me with an app on the macbook or PC to solve this problem without opening iphone hardware parts ?
I am not sure at which point you are referring to, but at the end of the video I powered it with a battery. I just connect to pc to pull data. There are a lot of software that can parse it, or you can just pull an itunes backup. I may make a video one day about the software I use, but they are nothing special and there are many different methods that different people use.
@@iBoardRepair After watching Jesse's video I believe you just used the charging cable to boot the phone. That's what I was asking about at the 53 or 54 mark
Im having issues improving my reballing skills, when taking out CPU I loose pads on CPU itself and not on the board. I use a SUGON 8620DX. Heat 380°C and Air flow 30... Pls are there any recommendation or Guide u can give to me?????
@@iBoardRepair thanks a lot man. I really appreciate. Watched your video and it does reball well. Please what solder paste do you also use to reball I phone 12 and 13 series sandwich board?
![iPhone 8 TRASPLANTE DE CPU - [GUIA PASO A PASO ✅] - RECUPERANDO DATOS DE UN iPhone. 😱](http://i.ytimg.com/vi/_CW8a_2a_kg/mqdefault.jpg)
On minute 44:17 was scary when the eeprom blow up. Thanks GOD you got the eeprom on the tower. Good video
Lol yes that was scary. I would have had to search for awhile otherwise. I use low air during that part. But still, I should not let that happen.
For cleaning the cpu undefiled what temp plz master am using Quick 861
i watched a few of your videos and think u explain things well i'm new to this about a yr and a half i done through hole soldering and sm back in school porter & chester learnning computer electronics, went to pitney for about 17 yr, pm machiens, learning the ipads, but this is very interesting i have watched videos so much to get what i can from them, hours and hours and more hours going back and a very lot of notes, i went deep in this hobbie and now need to learn more, thank you and to all who take the time to support the customer they keeps us going
Thanks for watching, happy to help!
My man! Keep up the good work.
Also good to hear from you bro! Thanks for the support!
Nice work and that’s pretty complex
hi can you share your temp and air in hot air for reference, and also the brand of you reballing stencil it very precise...thanks
I change my temps a lot. Usually I remove cpu around 370c with 75 air. But I am not firm with my temps. I use this stencil: www.unionrepair.com/maant-c1-magnetic-motive-reballing-stencil-platform-for-a8-a16.html
@@iBoardRepair thank you keep on sharing, learning a lot from you
great work.
Excellent work !
Thanks for watching!
Good job 👏
thanks aaron
you are good person. great work.
Awesome job ❤️
Thanks for the support Isaias!
Is the old board reusable by uv curing ?.
What happened there.
Peeled of pcb layer?
great work and vid
Next time please mention about the temperature and air at the side of screen for reference n educational purposes
I change my temps a lot. Usually I remove cpu around 370c with 75 air
What's the jig you use
www.unionrepair.com/maant-c1-magnetic-motive-reballing-stencil-platform-for-a8-a16.html
@@iBoardRepair thank you for the link
My iPhone xr has been serviced by the baseband but the technician said there was a crack in the baseband, and the data could not be copied, how should I do it? Thnk you
Baseband is for signal/service. It is irrelevant for data recovery purposes.
@@iBoardRepair i mean data of the baseband cannot copy 😅
@@iBoardRepair Because there is a crack in the baseband, there must be a way to copy the data (chip), not data storage,
Is it possible to upgrade the AP?
Not possible.
bro how temperature delodering this cpu and air flow?
Some of my newer cpu swap videos have temps, watch those.
Hi Aaron what is the CPU holder and stencil you are using please?
www.unionrepair.com/maant-c1-magnetic-motive-reballing-stencil-platform-for-a8-a16.html
Wish you had shown how to unsandwich the logic board
I assume if you are going to be attempting any type of cpu work, then you should already have the splitting skill down perfectly. Otherwise, there is zero chance at a successful cpu swap. Most of my other videos show the split, but it is very simple. Put on a heating platform, then pull apart when it is the appropriate temp.
@@iBoardRepair I saw how to do it in VCC video with a heater, etc...thanks
Nice job 👌👍❤️
BTW r u work from home?
Your daughter is so cute 🥰
It's an extremely difficult job. I wish I were at your level
how many degrees Celsius does the blower heat? Hello bro, I'm from Indonesia.. Your video motivated me to learn to use the CPU👍🙏
take me to be your student teacher🙏

Some of my newer cpu swap videos have temperatures, watch those ones.
Maybe they heating it with stove
😂
I think that beautiful little girl want to heat CPU again😂😂 but well done bro you are my inspiration ❤
Appreciate that bro!
sir please I need help. I have an iphone 12 pro max and sometimes appears like pink squares for only a second and when I try to play pubg mobile it crashes so much like every 3 minutes less or more it keeps crashing again all the time, and I'm not able to bring it back to apple for many resons. Can you help me with an app on the macbook or PC to solve this problem without opening iphone hardware parts ?
It most likely needs new parts and software won't help
How did you power up the phone? Was that the positive lead of the DC power supply?
Also, what do you connect to the phone to get to the data? And how?
I am not sure at which point you are referring to, but at the end of the video I powered it with a battery. I just connect to pc to pull data. There are a lot of software that can parse it, or you can just pull an itunes backup. I may make a video one day about the software I use, but they are nothing special and there are many different methods that different people use.
@@iBoardRepair After watching Jesse's video I believe you just used the charging cable to boot the phone. That's what I was asking about at the 53 or 54 mark
I am from India. iPhone CPU reballing long lasting or not.
Im having issues improving my reballing skills, when taking out CPU I loose pads on CPU itself and not on the board. I use a SUGON 8620DX. Heat 380°C and Air flow 30... Pls are there any recommendation or Guide u can give to me?????
I think you need to add a bit more airflow something at least 60
What stencil did you use for the CPU reballing?
www.unionrepair.com/maant-c1-magnetic-motive-reballing-stencil-platform-for-a8-a16.html
@@iBoardRepair thanks a lot man. I really appreciate. Watched your video and it does reball well. Please what solder paste do you also use to reball I phone 12 and 13 series sandwich board?
55:00 hi...
She says hi!
@@iBoardRepair 🥰
What solder paste do you use to reball iPhone 12 & 13 sandwich board?
148c, but 138 or even 183 would probably be okay too. It is just personal preference.
Beautiful daughter ❤️❤️❤️😘😘😘
brother
only luck to remove cpu
I am so lucky I put in thousands of hours of practice
cute baby
How much heat and air have you used to remove the cpu! You are not here to teach you are just making your content
Right.
nyz wrk
Thanks bro!
What stencil did you use for the CPU reballing?
I use Qianli stencils