Edge Milling with Timber Tuff Chainsaw Guide
Вставка
- Опубліковано 6 вер 2024
- I really need to mod this saw, with only 50cc's sometimes it's just easier to take two passes when edge milling thicker logs like this with my Timber Tuff. Having a Granberg ripping chain on it makes a huge difference though, it took much longer with a full chisel chainand left nowherenear as clean a cut!
Коротко и по сути . Знание что так можно сделать обезательно пригодится
Thanks, glad you found it helpful!
Beautifully done ✔️ 🎉
Thank you!
Bro has mad skills!!😮
Haha, thanks! Pretty "straightforward" task though 😉
Wondering if it can be done with clamps to not make extra holes in the wood. Or those holes won't be visible?
I've thought about it, would have to be something like a really long version of the MatchFit clamps from Microjig...The screws do leave holes but they aren't very deep or noticeable, still would be nice to avoid them though.
The other day I saw someone using L brackets to secure a log when using a different mill, but it got me thinking they could probably be used with this setup. Just secure the brackets under the guide bar and to the ends of the log. Would be holes in the ends of the log but whatever. Might also be some wiggle in the middle of the guide bar for longer cuts, but could easily just use some double-sided woodworking tape. I'll give it a try next log I mill up.
I use an alaskan mill and dont know why I never got this baby 😮. Gotta do it now... As for your question I nail into my timber for the alaskan all the time. As long as you dont PREDRILL, and theres no reason you would, green timber will fill the holes in quickly and completly. Old dry timber is another story. If youre that fussy about surface finish, but green wood has elasticity and will self heal in short order
@TC72280808 I wish the same could be said about screws. Even without pre-drilling I'll still find holes in the green stuff 2 years later when it's dried. Really isn't a big deal to me though.
@@OverkillWoodcraft I should make a point here. I live in Northern Alberta. Birch is the hardest wood we have here. My experience is mostly with pine so I shouldnt comment when I have no hard wood experience.
Built a 16’x 6’ wood shed with lumber made with this.
Awesome, I'm hoping to build a shed this summer...
Cool video! Ive never seen this device. Smart. How is the Proyama holding up? I have same saw only one tank of fuel through er yet but so far I like it. Im curious of your opinion on the saw.
Thanks! The Timber Tuff was $40 well spent! Honestly, it's been a great saw...especially since it ended up being free haha. I was annoyed at first because it advertised a 22" bar but ended up being 20", and I needed a 22" for a tree. So I called Amazon because I couldn't return it and they just refunded me. It does leak a bit of bar oil no matter how hard you crank down the screw but that's really the only critique I have. I've run it way harder than it probably should be expected and for years, still going strong. Would definitely mod the muffler though!
@@OverkillWoodcraft thanks for the fast reply and cheers free is great.
@@garretgauthier685 You're welcome, cheers!
9
@@ErnestWebv 10?
I have this same device. How do you get those last couple of boards with this set up?
@@modulevideos3907 I don't, I only use this for the edges. After milling them off I switch over to my Granberg EZ Rails and MKIV Chainsaw Mill. If you have have two saws, one dedicated to each setup, it's not too much hassle to switch and you get way more out of the log in terms of boards.
How you cut the top side so perfectly ? To start than the sides ?
@@Robin_Polarstern With this: ua-cam.com/video/_Umul4dw5-w/v-deo.htmlsi=Zzk1KuIdFZsFBTB-
Parabéns nossa tecnologia A Deus serralheria de galpão hoje se faz todo no mesmo lugar
Gteat device for planking a log. 👍
@@user-fk6in8hb6r Agreed!
How often do you have to sharpen the teeth on a chainsaw blade?
Really depends, but I made about 8 cuts like this and then gave them a light sharpening.
Yes.
@@user-qg1ig8xs5n that's what I thought
Vas verificando. También una leve reducción con Lina triangular al regulador de profundidad que parece aleta de tiburón delante del diente. Yo uso una viruta para ver qué sea parejo el desgaste del regulador de profundidad. Y al diente cuentas el número de limadas, por ejemplo cuentas cuántas limadas das al primer diente y esas mismas Atodos los demás. Pero es muy poco digamos 3 o cinco.
Where does one procure this nifty gadget?
@@TreDogOfficial Got mine off Amazon for less than $40 👍🏻
Can you cut boards with this?
@@DougVeazey-zl3xz Definitely. The log would need to be wider and it takes more time than a chainsaw mill though, which is I why I use the chainsaw mill after this. More efficient and maximizes the yield.
@@OverkillWoodcraft all right! Thanks a lot!
@@DougVeazey-zl3xz No problem!
Show us how you do the first cut
@@thesource6673 Full video of that on my page, Granberg EZ Rails.
Адвокат Егоров распиливая бензопилой деревья построил лодку.
Cómo se ase esa erramienta para cortar la medida exacta
I have a full video on it that explains everything 👍🏻
Dig that tune.
Like this one.
Its a good idia. 😮❤
whats the contraption as a guide where can i get one
It's the Timber Tuff guide, Amazon 👍🏻
А как певую сторону ровно сделать?
Use this, I have a full video on it 👍🏻
Надо просто развернутся.
chainsaw new west??
Nah, Proyama lol. Basically a Husky clone.
Onde consigo comprar esse guia.
Sick
Thanks
Where can I buy it ?
Amazon or their website. Here's my link: www.amazon.com/shop/overkillwoodcraft/list/3M1QA5PRVZNZR?ref_=cm_sw_r_mwn_aipsflist_aipsfoverkillwoodcraft_Y8FQY0669HRWP5K35ZCK&language=en_US
Somebody know the song??? 🥺🥺
It's at the bottom of the screen, No Limits by Royal Deluxe 👍🏻
❤
Como conseguir esa guía?
Amazon
Bravo
Thanks
Мне тож надо такое устроество😮
I got it off Amazon, called the Timber Tuff chainsaw guide 👍🏻
Tool name please
@@kameikusingamkamei2432 Timber Tuff Chainsaw Guide
Как название этой приспособы?
Мельница для бензопилы Направляющая для резки пиломатериалов, на Озон есть
Donde lo podria ordenar
Amazon 👍🏻
@@OverkillWoodcraft amigo ,cómo se llama para ordenarlo.xfavor..
❤❤❤Super 👍👍👍👍👍👍
Thank you!
👌
Good
Thanks
สุดยอดครับ
Thanks
Onde comprar essa guia ?
Amazon
ok, thanks,can you put link
@@user-fg8rc1gk4v www.amazon.com/shop/overkillwoodcraft/list/3M1QA5PRVZNZR?ref_=cm_sw_r_mwn_aipsflist_aipsfoverkillwoodcraft_Y8FQY0669HRWP5K35ZCK&language=en_US
You can’t eyeball that ?
As in not use a guide for this cut? I'm sure I could but it wouldn't be as accurate, safe, or efficient and it would just suck in general. Especially when there's 7 other cuts this size and longer. Have you ever done all that freehand?
@@OverkillWoodcraft try eyeballing it then run through industrial planner think me later. You will see you are better than you think you are brother!
@@mrtahoe I appreciate that...Not about me being better though, it's about me not wanting to. I make furniture with most of this and have to reference the edge on my 6" jointer, so I want the edge to be as straight as possible.
@@OverkillWoodcraft smart move.
สุดยอด😢🎉❤
Thanks
А як купити ?
I got it off Amazon, called the Timber Tuff chainsaw guide 👍🏻
Я так само обрізав 3 сторони на балки, чи крокви бензопилою.
Nice
Este corte e omassmo
Kitna pad jaega yah machine
Amen nba amen
😮🤔👍👍
Gostei vou f um
நன்றி நன்றி நன்றி ❤
Pulling the chain towards your leg?!
Yup, and I'm done educating people like you who make uninformed and clearly inexperienced comments like this.
Cool
ОТЛИЧНО!
Thanks!
Qui Siera cominicarme Con usted
Email in my bio 👍🏻
@@OverkillWoodcrafthow can I get that kind of tool to attach it to my chainsaw?
@@ramonbustamante8631 Made a full video on it here: ua-cam.com/video/CfFLoB6Wkdg/v-deo.htmlsi=B5L0ZEnxriz_NUBg
มีขายบ่อยูเมืองลาว
Нет!Не пилит пила вдоль!
И я хочу
Link in my bio to Amazon store 👍🏻
Если музыку убрать, то можно и посмотреть.
I'm good.
Keren bro
?
Edging
Пипикала гармошка, кубик рубик готов! А зачем нужен? 😮
Till the leg is gone...
@@Mpire09 Clearly you've never used this setup and very little (if any) experience with chainsaws or you wouldn't leave such an embarrassingly ignorant comment. Run along and kick rocks.
👍👊