Beginner step by step Wood Carving a 2D Rose with Dremel flexshaft.
Вставка
- Опубліковано 5 вер 2024
- I go threw step by step for the very beginner wood carver how to carve a 2d rose on a thin board.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?af...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.c...
Manpa tools👇🏻
www.manpatools.com
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com...
etsy.me/2Usrss6
/ carving_fusion
#carvingfusion #Carvingfusion
Hi Jordy
A few quick notes. Thanks so much for doing this carving. I was just looking for some tips. You gave me the whole enchilada!!!
I have prepared a couple of pieces to begin my foray into woodcarving. I probably will try a few to see how it goes. No doubt mistakes will be made but with your encouragement I'm starting.
Secondly your generous offer to send the work to me is deeply appreciated.
Thirdly you are not only a master but an excellent teacher. I learned quite a lot watching
Finally I have a gut feeling that after a few attempts I will take you up on your offer and bring your piece to the brain injury Center for the member. He might have to choose between mine and yours. Some choice!!!! LOL. LOL
In any case you are so kind and thoughtful.
Finally I will send you a few pics showing the progress of my work
Cheers
John Hassan
Bless you John
Thanks john ? I'm glad u seen the video and I really hope it helps you, .the carving is yours if you want it :)
You know how to get ahold of me
Good tips! Watching from Scotland. Thanks a lot.
Thanks Jordy for just being honest and not editing your videos. Your video are extremely helpful to a ham and eager like me. Thanks again!
Thanks, I did this for Mother’s Day last week if you want to see it let me know fellow ontarian
thanks for reminding me to have fun. I get so caught up on end product.
Slowly working my way your videos, this one was awesome Jordy. It's given me an idea for valentines day 👍👍👍
Nice carving
Nice rose definitely have to give it a try
Jordy there is an easier way of transferring this rose. - turn it over, tap the top to the board, get a rag, a credit card, and some lacquer thinner, - put some lacquer thinner on a rag, dampen the paper and then scrape the paper with the credit card. The picture will be transferred.
When I want to see shadows, I use my flashlight, works perdy good. Have a great day Brother
Awwwwwe awesome work and very touching cause
Jordy as soon as you said he donates his time to helping brain injury people I like him Wright away . ❤
Brilliant. Thanks Jordy
It's really great but, if I do anything from nature I don't worry about getting it exactly the same as the drawing.
A great cause, well done my friend.
:)
Great carving and great information, you explain so well and in a way that makes you want to give it a go. 💜
You the man jordie
Thank you
Ah, the "Sweet Rose of Sharon"..... Lovely design and workmanship J-man!
Thank you
Jordy, Outstanding! BTW I thought I was the only guy with a forest (hairs) growing out of my ears! Who knew...
Lol
...good tip. I hope I remember that one. I keep a selection of plastic cards cut to various widths on my project table for spreading glue.
I made a welcome sign same concept but used a chisel to take the wood down after cutting outlines around the letters. This way looks a lil faster, great work i think i might try to start a channel too thanks to you your great inspiration. I appreciate all videos you out out.
Thank you
Great job Jordy. You give us so many ideas and techniques at a speed that allows us all to grow faster then believed possible. You are a great teacher. Keep them coming.
Thanks bob
Carving magic
Amazing as usual Jordy, thank you!!
Man you do awesome work. I just happened to stumble onto your channel and I dig it. I have a wood burner but honestly have yet to use it. Will have to get a dremel and give it a try. Thanks again for sharing your work. Great teacher by the way
Awesome and thank you
It looks great bro 🤟Im sure it will be cherished, Hope ya had fun oh the Island & youve come back refreshed 💪
Thabks spike I'm here till friday
@@CarvingFusion Thats wicked bro 😃
You’re the man brother! Appreciate everything you do!
Yea iam old and bold and yes have hair places I don't want it hahaha. Nice rose, have to try this one day. Take care, be safe.
:)
The rose turned out great thank you for your time
You are the man!! Thank you for who you are.
Nice job Jordy. Thank you for your kind donation.🌞
Great job Jordy. So proud to know you via you tube for all your humble,kindness. Giving heals the heart and mind. Thanks for sharing and be well.
Aww thanks linda
Truly got to say, you do a fantastic job of explaining each step and why it is done. You are very motivational and really make me feel as if I could do this also. Thanks for sharing. I am looking forward to attempting things like this.
Thanks moon and yes you can do it
first comment was halfway through i love how you walked through all the steps to bring the rose out the extra texture in the board is just an awesome touch!! and of coarse i dig all the burning!!!! very cool piece awesome so cool where its going you got a big heart sir!!!!
Thanks tim
Suggestion: what if you run a handheld planer on the left & right side of the relief to level the backboard surface. It would act as a levelling guide when using the dremel to remove & finish levelling the backboard.
Geo.
Very nice! I haven't carved in over a year and need to get back to it. My problem is that I get all gung ho into something and go like mad in whatever it is and end up burning myself out. I can never stick with anything, it's frustrating! I still watch you though.
Thank you
A helpful tutorial and a great gesture 😃
Awesome ❤️ this is something I also wanted to know 😀 ty so very much ❤️ you R sooooo Awesome 👌🏻
:) thank you too
Nice rose Jordy as it looks very relaxing to do!
Thanks rick
Great job Jordy! You’re always giving me more ideas. Thanks brother!!
It turned out nice, and some very handy tips too, thanks Jordy!
Thanks claire
Absolutely awesome! The Master at making Masterpiece’s!! I have no hair on my head! Its all growing out my ears,nose, and face! I look like wood spirit/ fucking gnome!
I Made A Heart Shaped Spoonrest
For My I.L.S Worker I've Been With
For Over 14 Years. & I Hope She Likes It.
I LOVE the transfer paper deal!! I've got a boat load as well. Thanks for the idea!! I'm new to watching you but I am digging your videos. ❤
Thank you
Great job Jordy .
Great carve loved every minute
Me too ✋️ I'm like a bull in a China shop 🤣🤣
That's really a different idea. Thanks for the tutorial. Looks nice.(R)
I just recently found your site and I love your work. I was watching the 2D rose video today and am wondering if you have ever carved this type project with a palm router.
No sorry I have not
Thank u
thats too cool thats what i have been doing for my wood burns lately love it works great! i can draw sometimes lol its wild hit an miss sometimes i draw what i want sometimes its garbage... i use the tranfer paper for my own art(when i like it) and google images awesome video piece looks sweet!!!! stay safe keep carving
Beautiful.
Lol ur so funny 😁
Ear hairs are a product of gravity at work...
Lol
Love it
For the finish, I would have used a spray lacquer. Dries in like 30 seconds and is ready for a second coat in 15 minutes. In my world, Mod Podge is a hoaky weird crap that I wouldn't use, ever. For any reason. But then, again, I AM a professional.
Cool rose you just have to let that ear hair grow out long enough to do a comb over lol lol lmfao
I know what you are talking about it's like over night a 3 foot or one meter hair pops out of your ear lol
Remember when your mom use to say wash your ears so you don't grow taters in them hahahah she was long it's super long ear hair hahahha stay safe brother Just carve
Hahah ear hairs
Jordy, can a wood spirit be carved using a one foot long 2x4 or 2x6 dry cedar boards from a building supply store, what about using 1x6 cedar fence boards? Looking for an inexpensive wood to practice on from the wood supply store. Thanks
Yes sure can be
107 / 5 000
Résultats de traduction
Jordy, mistakes don't exist in real Nature! It is the creation of the human, not the artist!
Thank you
When I carve so much I find myself trying to blow off the dust on your cutting while watching 😵💫🤯🫣
Lol