DIY aluminum transom install for jon boats/small boats: THE ULTIMATE BOAT MOD!
Вставка
- Опубліковано 20 сер 2024
- Aluminum Transom: tbnation.net/p...
Atlas micro Jacker tbnation.net/p...
TBNation’s Web Store: tbnation.net/
Livewell Systems tbnation.net/c...
LED Light Kits tbnation.net/p...
Aluminum build kits: tbnation.net/c...
EVA foam boat decking: tbnation.net/p...
__________________________________________________
* GET EXTRA HIDDEN VIDEOS OF THIS BOAT PROJECT:* Patreon.com/TBNation
Full Amazon Store: www.amazon.com...
* TBNation's SOCIAL MEDIA platforms*
_______________________________________________
Instagram link: / tinyboatnation
Instagram: Handles
@tinyboatnation
@titan_of_DIY
_______________________________________________
*Find us on Facebook
Our Official Page: / tinyboats
Our Group Page: / 1705177409792306
______________________________________________
Music:
From UA-cam Free Creator Library.
or Art-List. License #872969
______________________________________________
Instagram Handles:
@tincancrew_official
@senditjonboats
@tinyboatnation
@fireantboats
@fewmanboats
@nathanieleckhold
@adamryana@adubjones@jmbfishing@kayakdiy
TBNation’s Web Store: tbnation.net/
______________________________________________
Recommended Channels:
Tiny Boat Nation
Tin Can Crew
Fireant Fishing
JDS Outdoors
________________________________________________
Disclaimer: I am not a professional fabricator or builder.
I am a DIY Creator supported by this channel's audience
to put out concepts for people to view.
Modify your boat at your own risk. - Навчання та стиль
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
The wood transom you pulled out--the splitting is in the layers of wood that had the grain perpendicular to the water. Picture each layer as a stack of straws all pointing the same way (and 90 degrees to the neighboring layer): the layers with end grain into the water pull the water up and split; the layers parallel to the water don't pull the water in as well.
Love my new transom from TBN Outdoors. I too went with an all aluminum transom. Great video sir. Enjoyed watching.
I’ll try to comment on more content been watching y’all got over a year love the work
One tip with aluminum is to spray it with wd-40. Its soft stuff so when doing fitup or wedging it in etc...a little lube goes a long way. Also when you cutting plate with a metal circ saw, spray some wd 40 on the fence and see how much easier it is to cut.
Great video. I have a older Jon boat and was thinking of upgrading the transom.
awesome.... 👍🏼 that face when you kinked the bildge hose 😂🤣
Great video of one of the scariest project I could imagine! You made it look easy...
Love the upgrade. Love the flexibility for the diyer to trim to fit THEIR rig. I'm blessed with tig and scrap o plenty or would be hitting up these folk for a nice 95% drop in. Great video.
Right on
👏👏That transom is so awesome and will help out sooooooo many people ❤️👊
This is great. Your bilge is a mess! Would love so see a vid about everything in the bilge while you clean it up, new hoses, ect.
I love the channel been watching it for a long time but when you’re explaining things, I wish you would talk a little slower and go into a little bit more detail. Keep up the good work.
When you said if you have a 20" transom don't go down and all I hear in my head is I know I know I know! Lol
Why did I cut mine down!
Get that transom welded 👍🏼
I love my atlas micro jack plate on my 16 ft boat so worth the money
Iv got a 1994 alumaweld express 17ft it's all aluminum I wished when it was built they would put tubing or at least cosa board in the transom at least where' the motor bolts on iv had it 4 years some one over tighted it squished the transom some still solid but transom on a alumaweld are holow
That was awesome and what a upgrade
thank you for all you do!
Best mod ever!!!
Great vid. Ur gunna be flyin
Great video. Ill be ordering one soon.
Thanks for watching!
Tiny Boat + 60 HP = ROCKET!
Planning this same mod for my grumman gfs
If I have to do this once it’s getting this upgrade. I don’t wanna repeat the work I’ve seen you do lol.
Had a friend put a plate on his V14 tracker and its way to low now and water comes over the back. Have others had this issue? He has a long shaft 15hp on a V14 Guide. He fixing to add pods etc.
Been building my boat with suplies from your website...the new aluminum transom wasnt an option when i was doing mine, wish it was but missed it by a month...anyway, you used fiberglass resin on your wood transom rite? I bought west marine epoxy resin and did three coats on it. I purchased the plywood alil under size and made up the difference with the epoxy...i wish this was a option then but i think i should be ok. Thanks for what you do!
I like the aluminum transom idea a lot! It doesn't look like you used marine plywood on your old transom? What it the weight difference?
NICE!!!
I would love to have a 30 horse on my 12 footer. I have a 15 right now and can do 24 with just me in it. I’d love to be able to go 30-35 with an upgrade like this 🤘🏾.
It’s a 12 foot vhull lowe
@@TinyBoatNation I know lol. I just think it would be funny to see a really small boat throwing a rooster tail. But it wouldn’t be safe for me or the boat. My 15 horse gets me where I need to go fast enough. How long is your boat you put the 60 on?
Maybe you could open a second channel where are you go into more detail tiny boat nation full detail…
I have a 16foor track v shaped but want to put a bigger transom on that
what are peoples thoughts if a guy was to make a simular aluminum sandwich filled with pour in transom then cut to fit . still no wood inside to rot but making the surface 100% solid from edge to edge.
It’s time to replace the transom on my boat. I need all the pointers I can get
I wanna get aluminum trans for my starcraft boat and cause I want to recover my boat with four stroke with Same amount of horses but would be little more heavier than my 93 110 hp johnson outboard motor it's great motor bjt I noticed it using a bit more fuel than my brother boat and he has 40 more horses and his more boat weighs more
I had no idea they even made all aluminum transoms. I am currently in the process of making my own all aluminum transom for my boat and ran across your video. I was looking at seacast to just pour mine in bc it would be so much quicker, but my boat doesn't have an inner and outer transom skin .
Just curious, what company makes those all aluminum transom ?
Did you put transom on backwards?? It said front in marker on the rear facing side??
The wood was rotting from being wet. If you would have spent $20 on fiberglass resin and applied a couple coats over the wood it would have lasted for decades.
No, it won’t. Resin cracks and degrades with wave shutter. Resin coating wood doesn’t make it any better, it just makes it less prone to corroding the aluminum and will increase the life of the transom, but the transom will eventually go, because what is organically prone to degrade.
@@TinyBoatNation then how did mine that I did with wood and fiberglass resin in 1991 last till this past fall? I put my boat in every spring and leave it docked in the water till fall...lasted 32 years. Probably would have lasted longer if my automatic bulge pump failed. It sat submerged for a week a couple times.
Fibreglass is the way 👍🏻👍🏻
@@aggravatedtrade2254 sure is, I just got my boat back together after I put a couple coats of fiberglass on the new ACX wood transom. It looks like a Bowling ball alley. Smooth as glass and as hard as a rock. It will outlast my and your lifetime.
@@tripplebeards3427 how do boats from the 80s not have rotted wood? All about condition nothing wood an glass on a transom if no way shape or form stronger then aluminum tubing on a transom
Will that aluminum transom work well for my old tracker txs17 and a 70hp motor or would you go with something solid?
Can these be custom made and rated for up to a 90hp motor on a 17ft V Bottom
Yes. Contact our store. The description has all the info.
Trying to see where can I find a "Transom Corner Cap" for my 1988 Fisher SV 18 CC...if you want me to send pics and diagram I can forward it to you.?
We can custom make one for you if you start an email to support@tbnation.net
Think that'll fit on my 12ft Sears v-hull? Lol
Heck yea I made it in a video lol
What is a "tranzum"?
How can I order one for my 1974 16' starcraft
Go to TBNation.net and search “transom”
Are you going to sell your 25 horse If you are I would be interested
killer
This is incredible! I cannot wait to see this boat w a 60! This is next level, you guys just keep pushing to new heights, freaking love it 🙌🏽
You work hard, but learn from your previous mistakes and get away from drilling so many holes and using all the rivets and screws. They weaken and leak like hell. What happened to that welder a subscriber gave you a while back?