How to make a NAKO Tattoo Machine
Вставка
- Опубліковано 24 вер 2017
- ☀ WITH REVOLUTIONARY CAPTECK ☀
✓ Available at www.gekotattoo.com
★ MADE IN ITALY WITH LOVE AND PASSION ★
Dance, Don't Delay di Twin Musicom è un brano autorizzato da Creative Commons Attribution (creativecommons.org/licenses/...)
Fonte: www.twinmusicom.org/song/303/d...
Artista: www.twinmusicom.org
Bellissimo video!!! Ottimo lavoro! Adoro l'attacco RCA. Pensavo foste americani e invece siete dietro l'angolo 👏👏👏 💪
Damn that is so beautiful. Well done guys. Soon as I can afford one I am game!
Definitely a killer machine! Very well built n great placement of capacitor...!
Thanks Jimmy!
Now that's a beautiful machine.....I want a set so bad. The more I see this.
You are so great and your work so great
Thanks!
Amazing craftsmanship
Very good job 👍 from im an 🇮🇩 Indonesia.
son perfectamente HERMOSAS...! te super felicito..!
como puedo comprar una maquina.??
smart design on the capacitor in the handle! I always wondered why tattoo machines were made with multiple pieces vs being machined from one solid piece, or several separate pieces not welded together. Thank you for this tutorial. I am a machinist and am looking at several designs to make a tattoo machine for my daughter. This gives me a nice starting base.
@@ivanmendoza8457 why specifically those capacitor ratings?
@@justin_704 they make the speed of your machine for a liner u want a machine that goes from 130 to 150 cps in a shader u want a machine that has 80 to a 110 herts
@@ivanmendoza8457 OK. I don't know exactly what the cycles per second are, I have dabbled a bit in electronics but not with tattoo machines nor have I used one before. It's more of a pet project at the moment
Idk about tattoo machines but it looks like art itself.
big love from germany
Look great😍😍😍
I want it, , , I want it, , ,🤗🤗🤗
I would definitely like to try one out.
Pretty neat machine and I like the capacitor set up, but even as neat as it is, it's like trying to re-invent the wheel. Lots of great machine builders are still around. Still, Id like to put one in my daily rotation for a week to check it out.
I had one as an apprentice they made dope mid to large grouping liners not heavy either but cause the frame was bolted on I'd get weir rattles and I'd have to tighten everything from vibrations like the old time machine by fowler Kool ideas but sometimes not practical
all that tech and still needs a rubber band or 2 to make it work.. I love tattooing
Hi! Two rubber band for our tattoo machine.
WONDERFUL!!!!
Man I want your job!!!
Woaow las maquinas más hermosas que e visto tsss excelente diseño
Gracias!
So satisfying to watch.. ; -)
Very....
hermosa máquina...
Tremendo, cada detalle resuelto... excelentes todos los planos del video. Gracias por subirlo, saludos genios.
GRACIAS!
@@GekoTattoo1995
Is there a purchase link on shopee?
When are you guys back in business or are you out of business now??
Nice tattoo machine very clean good jobs
Thanks!
ciao!
dove acquisti tutti i pezzi per assemblare la macchinetta? vorrei provare anche io a fare la mia!
it's a work of a dream
Lovely work 👍
Thanks!
Como puedo adquirir una maquina de esa?
En que pagina puedo conseguir?
Where can these machines be purchased? I love a solid coil machine, can they be made to specific needs?
Wish u still made these
we still do it www.gekotattoo.com
great upgrade...do you guys shipping to Asia...Borneo specifically
Hi Andy! Of course, we ship worldwide. You can send me an email with you full delivery address: info@gekotattoo.com
wow nice system
The very best design of tattoo machine 👏👏
Una belleza son estas máquinas
Gracias!!!
Muito top essa máquina
I definitely would like to see you machines in use!!!!
Hi Mark! You can see the NAKO tattoo machines in action on our Instagram @gekotattoo
Hi Mark, soon will share some videos with our machines in use
Ur site is been ofine for a while i really want one i still use liner coil machones and im digging this
Hi the site should be online in about 1 month, with all the tattoo machine and more. Sorry for the wait, thanks for the contact.
looking so quality full..
I might consider one of these if not for that capacitor, well that and there's just something I don't really like about a frame that's screwed together and not welded/brazed.. It looks really nice tho, I wish I could have heard the machine run and not just music..
Sus máquinas son una obra de joyeria mis respetos.
Muchas gracias Oswaldo!
wow i love it..and a iwant to have one😍
Thanks Jeannamarie, to receive a quotation you can send me an email to following address: info@gekotattoo.com
Hola buenas noches. Disculpe tienen alguna pagina
Excelente procedimiento me gustó quisiera una maquina de esas😢😭
No manches 😱 contratenme a trabajar con ustedes esta bien chidote 😀 quisiera ser empleado dde esa empreza 👍
my dream job
Envías a México bro ?
Me encanto este vídeo / gracias
Excelente!
Gracias Camilo!
I’d buy this machine very impressed
Hi! You can contact me by email: info@gekotattoo.com
Que espetáculo...
Tô precisando muito de uma dessas.
So, if they are CNC machined correctly, why the washers under the coils???
Beautiful machines
Thanks!
if you want to order how? currently i am in Indonesia
hey guys!! would like to buy a power liner, but not available now in your website, are they gonna be available soon?
Hi Thomas, please send me an email to info@gekotattoo.com
cel mai tare !
vă mulțumesc foarte mult!
Envia para o Brasil? quanto custa?
where i can buy full parts?
While I love the design and workmanship, some questions show up, like why the separate capacitor, is there any significant ups to it or just a design choice? Coils being separate was confusing until they where soldered together towards the end so that was actually pretty neat. The bolted on upright seemed a bit over engineered and to be honest is a weakpoint of the design because of the vibrations, I would most likely add loctite to the screws to make sure to minimize the risk of it shaking loose during operation, I would most likely add a locking washer and longer screw to the fron binding post since it is so busy with all the connectors and washers for the coils since this is also a weakpoint in my mind.
Over all a nice piece, a bit over-engineered in my mind but that's personal preference 🙂
The machine looks great and the system, but it is very expensive. Try to make a good offer of a tattoo kit and the power unit with cables. I want to see ... I always use a bobbin machine, but I'm going to try the rotary that I see is faster to work and set up ... but this machine looks good in the video ... but I don't know how it will work
Awesome bro any discount for the usa ?
It would be better if it where one solid pc.Still nice...
I am from Tanzania where can I get or can I send the money to you so u can send it by anyway
cool.
Very good job👍
Thanks!
@@GekoTattoo1995 how much tattoos machine dove possiamo acquistare le tue macchinette per tatuaggi
Exelente
super
Hi, nice. Your video i am tattoo Artist
Exporten a México algunas máquinas acá no se ven felicidades
how much would it cost?
I still don't know how you get the paper washers to stick to the coil post, do you just glue them?
Glue in only one washer.
what is the cost of these nako's
So nice
хоооооооооооооооооччччччччччччччччууууууууу себе такую!!!!!!!
You need fifty thousand dollars of hi tech machines to build a simple machine
Alguien utiliza stas maquinas.. Que tal son
What's the price ?
How much is that ?
M a big fans of ur Coil Tattoo Machines cam u shipped to me a machine M from India.....
price
What needle groupings can this machine push for lining?
Hi Dominic! We have two kind of Liner Machines: Liner and Power Liner. Liner canbe used with max 9/11RL and Power Liner until 18RL.
Price this machine?
你好有联系方式吗
请问 怎么购买
找不到购买平台
Jest gdzieś po polsku na ten temat
How about some tattoos on them arms?
Right.
Frames shouldn't be held together with 2 bolts. They should be 1 piece. looks nice though
And yet there he is, manufacturing tattoo machines. What is it you do?
Nice
I love thes plaies
hundred year old tech. . . . wow? . . .
linda Maquina
O M G
I thought the workers has tattoos too
Hlo m from India I need a liner machine
E muốn có 1 máy lắm... Nhưq >...
What is the name of the thigth that envolve the Coil?
Qual o valor desta maquina de tattoo ?
Hola! Aluminium version at 250Euro and iron version at 300Euro. You can see more informations at www.gekotattoo.com
Que precio tienen para Colombia
Hi, the price for one tattoo machine is 280Euro + shipping cost.
Where do we buy your machines
Hi, you can send me an email to info@gekotattoo.com
e k có đủ phụ tùng để lm
Quanto pesa la macchinetta? E perché nel video non fai sentire il suono?
Ciao! La macchinetta in alluminio pesa 165gr mentre quella in ferro pesa 215gr. Nel video non si sente il rumore della macchinetta perchè la registrazione con la videocamera oppure con lo smartphone non rende bene. Stiamo preparando un nuovo video dove si vedrà la macchinetta in funzione sentendone anche il rumnore reale.
very cool
Thanks!
your welcome . it's clean cut and looks damn good